Positive displacement machines have been identified as appropriate expanders for small-scale power generation systems such as Organic Rankine Cycles (ORCs). Screw expanders can operate with good efficiency in working fluids under both dry and two-phase conditions. Detailed understanding of the fluid expansion process is required to optimise the machine design and operation for specific applications, and accurate design tools are therefore essential. Using experimental data for air expansion, both CFD and chamber models have been applied to investigate the influence of port flow and leakage on the expansion process. Both models are shown to predict pressure variation and power output with good accuracy. The validated chamber model is then used to identify the optimal volume ratio and rotational speed for experimental conditions.

This paper presents the results of research related to the issues arising from DC excitation of power transformers due to geomagnetically induced currents (GIC). First, the GIC phenomena and their influence on power system operation are discussed. Then, a recorded case of tripping of the transformer differential protection due to geomagnetic disturbances (GD), as well as simulation signals from a developed model of a transformer subjected to a GD are analyzed. Next, two algorithms for GIC detection utilizing the rate of change of transformer differential currents and the DC component in the neutral current are proposed, thoroughly tested, and recommended.

This paper focuses on the problem of thermoelectric cooler waste heat recovery and utilization, and proposes taking the waste heat together with the original heat source as the input heat source of the integrated thermoelectric generation−cooling system. By establishing an analytic model of this integrated thermoelectric generation−cooling system, the steady-state and transient thermal effects of this system are analyzed. The steady-state analysis results show that the thermoelectric generator’s actual heat source is about 20% larger than the intrinsic heat source. The transient analysis results prove that the current of thermoelectric power generation and the cold end temperature of the system show a nonlinear change rate with time. The cold end temperature of the system has a maximum value. Under different intrinsic heat sources, this maximum value can be reached between 1 s and 2.5 s.

Micrometeorological observations from a tower, an eddy-covariance (EC) station and an unmanned aircraft system (UAS) at the WINSENT test-site are used to validate a computational fluid dynamics (CFD) model, driven by a mesoscale model. The observation site is characterised by a forested escarpment in a complex terrain. A two-day measurement campaign with a flow almost perpendicular to the escarpment is analysed. The first day is dominated by high wind speeds, while, on the second one, calm wind conditions are present. Despite some minor differences, the flow structure, analysed in terms of horizontal wind speeds, wind direction and inclination angles shows similarities for both days. A real-time strategy is used for the CFD validation with the UAS measurement, where the model follows spatially and temporally the aircraft. This strategy has proved to be successful. Stability indices such as the potential temperature and the bulk Richardson number are calculated to diagnose atmospheric b... [more]

Ammonia is a hydrogen-rich compound that can play an important role in the storage of green hydrogen and the deployment of fuel cell technologies. Nowadays used as a fertilizer, NH3 has the right peculiarities to be a successful sustainable fuel for the future of the energy sector. This study presents, for the first time in literature, an integration study of ammonia as a hydrogen carrier and a high temperature polymer electrolyte membrane fuel cell (HT-PEMFC) as an energy conversion device. A system design is presented, that integrates a reactor for the decomposition of ammonia with an HT-PEMFC, where hydrogen produced from NH3 is electrochemically converted into electricity and heat. The overall system based on the two technologies is designed integrating all balance of plant components. A zero-dimensional model was implemented to evaluate system efficiency and study the effects of parametric variations. Thermal equilibrium of the decomposition reactor was studied, and two different... [more]

In this study, the operational procedure of an experiment and simulation for a hydrogen-on-demand system using sodium borohydride hydrolysis is proposed. For an isothermal operating condition of a packed-bed reactor, the dynamic response between the input NaBH4 feed (FNaBH) and the output hydrogen flowrate (FH) of the reactor can be analytically derived and is a first-order transfer function. The time constant of this transfer function is a function of the reciprocal of the product of the reaction rate constant and the catalyst weight into the liquid volume of the reactor. The kinetic parameters of Co-B/IR-200 catalysts are regressed from the experimental NaBH4 hydrolysis reaction. The result shows a 30 °C operating temperature increase (from 40 °C till 70 °C) can shorten the dynamic response time of the hydrogen generation rate by around two-thirds. From theoretical derivation, a feeding strategy which supplies the combination of impulse function and step function of the NaBH4 feed fl... [more]

Liquid banking in the near wellbore region can lessen significantly the production from gas reservoirs. As reservoir rocks commonly consist of liquid-wet porous media, they are prone to liquid trapping following well liquid invasion and/or condensate dropout in gas-condensate systems. For this reason, wettability alteration from liquid to gas-wet has been investigated in the past two decades as a permanent gas flow enhancement solution. Numerous experiments suggest flow improvement for immiscible gas-liquid flow in wettability altered cores. However, due to experimental limitations, few studies evaluate the method’s performance for condensing flows, typical of gas-condensate reservoirs. In this context, we present a compositional pore-network model for gas-condensate flow under variable wetting conditions. Different condensate modes and flow patterns based on experimental observations were implemented in the model so that the effects of wettability on condensing flow were represented.... [more]

This study is aimed at increasing the performance and reliability of silicon-based heterojunction solar cells with advanced methods. This is achieved by a numerical electro-optical modeling and reliability analysis for such solar cells correlated with experimental analysis of the Cu2O absorber layer. It yields the optimization of a silicon tandem heterojunction solar cell based on a ZnO/Cu2O subcell and a c-Si bottom subcell using electro-optical numerical modeling. The buffer layer affinity and mobility together with a low conduction band offset for the heterojunction are discussed, as well as spectral properties of the device model. Experimental research of N-doped Cu2O thin films was dedicated to two main activities: (1) fabrication of specific samples by DC magnetron sputtering and (2) detailed characterization of the analyzed samples. This last investigation was based on advanced techniques: morphological (scanning electron microscopy—SEM and atomic force microscopy—AFM), structur... [more]

Operating temperature is an important parameter of thyristors to ensure the stable operation of power electronic devices. Thermal management technology is of great significance for improving the reliability of thyristors. In this study, the performance of a phase change material (PCM) mesh-finned heat sink is investigated for the thermal management of thyristors. A multi-physical coupling model of the PCM mesh-finned heat sink is established to analyze the effects of different power losses, air velocities, heights of fins, and thickness of PCM on the thermal performance of the PCM heat sink. The influence of thermal and flow fields on PCM is considered in this model. Furthermore, the heat sink design is optimized to improve the thermal performance based on the calculation results of thermal network parameters. The results show that the power losses, the air velocity, the height of fins, and the thickness of PCM significantly affect the protection ability of the PCM heat sink. After opt... [more]

In this paper, the effect of an external ultrafast transverse magnetic field (UFTMF) on a vacuum arc in the diffused mode has been studied. According to the results of studies, a novel approach for making a zero-crossing in a DC arc current has been presented. Plasma voltage fluctuations of the vacuum arc, which are caused by UFTMF, have been investigated via finite element simulation and two-fluid description of plasma physics. By making an appropriate UFTMF through an external circuit, the arc current can be commuted successfully from the vacuum interrupter (VI) to a parallel capacitor and charge it up. In this way, a zero-crossing in the arc current can be achieved, and the current will be interrupted by the VI. Simulation results, which are supporting physical backgrounds for this analysis, have been presented in this paper while technological issues for industrial implementation of this concept have been discussed in detail.

The energy consumption of an electric vehicle is primarily due to the traction subsystem and the comfort subsystem. For a regular trip, the traction energy can be relatively constant but the comfort energy has variation depending on seasonal temperatures. In order to plan the annual charging operation of an eco-campus, a simulation tool is developed for an accurate determination of the consumption of an electric vehicle throughout year. The developed model has been validated by comparison with experimental measurement of a real vehicle on a real driving cycle. Different commuting trips are analyzed over a complete year. For the considered city in France (Lille), the comfort energy consumption has an overconsumption up to 33% in winter due to heating, and only 15% in summer due to air conditioning. The urban commuting driving cycle is more affected by the comfort subsystem than extra-urban trips.

The potential absorption of solar energy in photovoltaic thermal (PVT) hybrid solar collectors at different tilt angles was compared in the present study. The optimal tilt angles were tested in three variants: during 1 day, 1 year and a period of 30 years. Simulations were performed based on actual weather data for 30 years, including average hourly total radiation, insolation and air temperature. The apparent movement of the Sun across the sky, solar radiation properties, and the electrical and thermal efficiency of a PVT collector were also taken into account in the simulation model. The optimal orientation of the absorber surface was determined by solving an optimization task. The results of the study indicate that in the long-term perspective, the collector’s performance is maximized when the absorber is positioned toward the south at an elevation angle of 34.1°.

The paper discusses thermal quality improvement in historic buildings. It is based on a case study of a wooden historical building in an architectural style typical of Zakopane, located in the Podhale region of Poland. The building’s historical value and timber structure prevent the application of typical thermal retrofitting solutions. This paper presents an analysis of the possibilities of the improvement of energy performance of a historic building (villa) which included: a review of the available energy performance improvement solutions applicable to this type of building, with a particular focus on applying internal insulation; a technical condition assessment using non-invasive methods, the identification of problematic areas in terms of the thermal retrofitting of buildings with timber walls and decks; in situ tests: thermovision tests which showed the places with temperature distribution field disturbances in the building’s envelope, focusing on thermal bridges; measurements of... [more]

In this study, a novel 4H-SiC double-trench metal-oxide semiconductor field-effect transistor (MOSFET) with a side wall heterojunction diode is proposed and investigated by conducting numerical technology computer-aided design simulations. The junction between P+ polysilicon and the N-drift layer forming a heterojunction diode on the side wall of the source trench region suppresses the operation of the PiN body diode during the reverse conduction state. Therefore, the injected minority carriers are completely suppressed, reducing the reverse recovery current by 73%, compared to the PiN body diodes. The switching characteristics of the proposed MOSFET using the heterojunction diode as a freewheeling diode was compared to the power module with a conventional MOSFET and an external diode as a freewheeling diode. It is shown that the switching performance of the proposed structure exhibits equivalent characteristics compared to the power module, enabling the elimination of an external free... [more]

The proper representation of faults in coupled hydro-mechanical reservoir models is challenged, among others, by the difference between the small-scale heterogeneity of fault zones observed in nature and the large size of the calculation cells in numerical simulations. In the present study we use a generic finite element (FE) model with a volumetric fault zone description to examine what effect the corresponding upscaled material parameters have on pore pressures, stresses, and deformation within and surrounding the fault zone. Such a sensitivity study is important as the usually poor data base regarding specific hydro-mechanical fault properties as well as the upscaling process introduces uncertainties, whose impact on the modelling results is otherwise difficult to assess. Altogether, 87 scenarios with different elastic and plastic parameter combinations were studied. Numerical modelling results indicate that Young’s modulus and cohesion assigned to the fault zone have the strongest... [more]

Nowadays, ancillary services (ASs) are usually provided by large power generating units located in transmission networks, while smaller assets connected to distribution systems remain passive. It is expected that active distribution systems will start to play an important role due to numerous issues related to power system operation caused mainly by developing renewable generation and restrictions imposed on conventional power generating units by climate policies. The future development of the power system management will also lead to the establishment of new market agents such as distributed resource aggregators (DRAs). The article presents the concept of the DRA as part of an active distribution system enabling small resources to participate in wholesale markets, provide ASs and indicates the functions of the DRA coordinator in the modern power system. The proposed method of the DRA structure modelling with the use of the mixed-integer linear programming (MILP) is aimed at evaluating... [more]

Although decarbonisation is one of the most important macro-trends of this century, electricity generation from coal power plants is still broadly common. The main goal of this study is to evaluate the impact of a premature coal power plants phase-out on the Italian day-ahead electricity market. For this purpose, two electricity price forecasts, related to different scenarios between 2019 and 2030, and two different hypotheses for the creation of electricity spot price, were compared. The results from the different scenarios show that coal power plants phase-out determines a small variation in electricity price when bid-up is not considered; instead, when operators’ bid-up is included in the study, the price variation becomes relevant.

In data centers, heating, ventilation, and air-conditioning (HVAC) consumes 30−40% of total energy consumption. Of that portion, 26% is attributed to fan power, the ventilation efficiency of which should thus be improved. As an alternative method for experimentations, computational fluid dynamics (CFD) is used. In this study, “parameter tuning”—which aims to improve the prediction accuracy of CFD simulation—is implemented by using the method known as “design of experiments”. Moreover, it is attempted to improve the thermal environment by using a CFD model after parameter tuning. As a result of the parameter tuning, the difference between the result of experimental-measurement results and simulation results for average inlet temperature of information-technology equipment (ITE) installed in the ventilation room of a test data center was within 0.2 °C at maximum. After tuning, the CFD model was used to verify the effect of advanced insulation such as raised-floor fixed panels and show th... [more]

Widespread dissemination of electric mobility is highly dependent on the power converters, storage systems and renewable energy sources. The efficiency and reliability, combined with the emerging and innovative technologies, are crucial when speaking of power converters. In this paper the interleaved dc−dc topology has been considered for EV charging, due to its improved reliability. The efficiency comparison of the SiC-MOSFET and Si-IGBT-based converters has been done on wide range of switching frequency and output inductances. The interleaved converters were considered with the optimal switching parameters resulting from the analysis done on a detailed parasitic circuit model, ensuring minimum losses and maintaining the safe operating area. The analysis included the comparison of different inductors, and for the selected ones the complete system efficiency and cost were conducted. The results indicate the benefits when SiC-MOSFETs are applied to the interleaved dc−dc topology for wid... [more]

This paper aims to provide a quantitative understanding of the performance of numerical modeling of a wave field equation using general-purpose processors. In particular, this article presents the most important aspects related to the memory workloads and execution time of the numerical modeling of both acoustic and fully elastic waves in isotropic and anisotropic mediums. The results presented in this article were calculated for the staggered grid finite difference method. Our results show that the more realistic the seismic wave simulations that are performed, the more the demand for memory and the computational capacity of the computing environment increases. The results presented in this article allow the estimation of the memory requirements and computational time of wavefield modeling for the considered model (acoustic, elastic or anisotropic) so that their feasibility can be assessed in a given computing environment and within an acceptable time. Understanding the numerical mode... [more]

For the problem of poor accuracy of the existing multi-rate simulation methods, this paper proposes a multi-rate real-time simulation method based on the Norton equivalent, compared with multi-rate simulation method based on the ideal source equivalent. After the Norton equivalence of the fast subsystem and the slow subsystem are established, they are solved simultaneously at the junction nodes. In order to reduce the amount of the simulation calculation, the Norton equivalent circuit is obtained by incremental calculation. The data interaction between the fast subsystem and the slow subsystem is realized by extrapolation method. For ensuring the real-time performance of the simulation, the method of the slow subsystem calculates ahead of the fast subsystem is given for the slow subsystem with a large amount of calculation. Finally, the AC/DC hybrid power system was simulated on the real-time simulation platform (FPGA-based Real-Time Digital Solver, FRTDS), and the simulation results w... [more]

This study focuses on establishing a surrogate model based on machine learning techniques to predict the time-averaged spatially distributed behaviors of vaporizing liquid jets in turbulent air crossflow for momentum flux ratios between 5 and 120. This surrogate model extends a previously developed Gaussian-process-based framework applicable to laminar flows to accommodate turbulent flows and demonstrates that in addition to detailed fields of primitive variables, second-order turbulence statistics can also be predicted using machine learning techniques. The framework proceeds in 3 steps—(1) design of experiment studies to identify training points and conducting high-fidelity calculations to build the training dataset; (2) Gaussian process regression (supervised training) for the range of operating conditions under consideration for gaseous and dispersed phase quantities; and (3) error quantification of the surrogate model by comparing the machine learning predictions with the truth mo... [more]

This paper discusses the benefits of an advanced highly-efficient approach to static and dynamic electrothermal simulations of multicellular silicon carbide (SiC) power MOSFETs. The strategy is based on a fully circuital representation of the device, which is discretized into an assigned number of individual cells, high enough to analyze temperature and current nonuniformities over the active area. The cells are described with subcircuits implementing a simple transistor model that accounts for the utmost influence of the traps at the SiC/SiO2 interface. The power-temperature feedback is emulated with an equivalent network corresponding to a compact thermal model automatically generated by the FANTASTIC tool from an accurate 3D mesh of the component under test. The resulting macrocircuit can be solved by any SPICE-like simulation program with low computational burden and rare occurrence of convergence issues.

Locating the partial discharge (PD) source is one of the most effective means to locate local defects in power cable lines. The sampling rate and the frequency-dependent characteristic of phase velocity have an obvious influence on localization accuracy based on the times of arrival (TOA) evaluation algorithm. In this paper, we present a cross-correlation algorithm based on propagation distance to locate the PD source in cable lines. First, we introduce the basic principle of the cross-correlation function of propagation distance. Then we verify the proposed method through a computer simulation model and investigate the influences of propagation distance, sampling rate, and noise on localization accuracy. Finally, we perform PD location experiments on two 250 m 10 kV XLPE power cables using the oscillation wave test system. The simulation and experiment results indicate that compared with traditional TOA evaluation methods, the proposed method has superior locating precision.

Over the years, electricity consumption behavior in Brazil has been analyzed due to financial and social problems. In this context, it is important to simulate energy prices of the energy efficiency auctions in the Brazilian electricity market. The Markov Chain Monte Carlo (MCMC) method generated simulations; thus, several samples were generated with different sizes. It is possible to say that the larger the sample, the better the approximation to the original data. Then, the Kernel method and the Gaussian mixture model used to estimate the density distribution of energy price, and the MCMC method were crucial in providing approximations of the original data and clearly analyzing its impact. Next, the behavior of the data in each histogram was observed with 500, 1000, 5000 and 10,000 samples, considering only one scenario. The sample which best approximates the original data in accordance with the generated histograms is the 10,000th sample, which consistently follows the behavior of t... [more]