The Czech Republic is introducing new technological concepts for mitigation of greenhouse gases (GHG) in coal-based energy industries. One such technology, in power plants, is post combustion CO2 capture from flue gases by activated carbon adsorption. A life cycle assessment (LCA) was used as the assessment tool to determine the environmental impacts of the chosen technology. This article focuses on a comparative LCA case study on the technology of temperature-swing adsorption of CO2 from power plant flue gases, designed for the conditions of the Czech Republic. The LCA study compares the following two alternatives: (1) a reference power unit and (2) a reference power unit with CO2 adsorption. The most significant changes are observed in the categories of climate change potential, terrestrial acidification, and particulate matter formation. The adsorption process shows rather low environmental impacts, however, the extended LCA approach shows an increase in energy demands for the proce... [more]

We investigate with this study the effectiveness of mechanically activated serpentinite in capturing Cu (II) from the multi-constituent acidic wastewater of the pit lakes of the Agios Philippos mine (Greece), proposing specific areas with serpentinites suitable for such environmental applications. For this purpose ultramafic rock samples that are characterized by variable degrees of serpentinization from ophiolitic outcrops exposed in the regions of Veria-Naousa and Edessa have been examined regarding their capacity to remove the toxic load of Cu (II) from wastewater after having been mechanically activated through a Los Angeles (LA) machine (500, 1000 and 1500 revolutions). The more serpentinized and mechanically activated samples, as they have been characterized after a combination of various mineralogical, petrographic, geochemical analyses as well as after different stresses of abrasion and attrition, seem to be more effective in Cu removal than the less serpentinized ones. Selecti... [more]

Atmospheric stability has been studied for decades. There are several methodologies that evolved over the years. In this study, a special experimental meteorological mast that has been erected to a complex site has been used to calculate dimensionless Obukhov length ( ζ = z L ) , dimensionless momentum ( φ m ), and heat coefficients ( φ h ). The results are compared with the ones from average value approaches: Richardson number, flux-profile (F-P) relations, and wind shear exponent methods. The results show that the estimated ζ values, using the bulk Richardson number, get along well with the reference ζ within the neutral and stable regimes. F-P relations and wind shear exponent methods result in the best agreement for stable and neutral regimes. Nevertheless, average oriented methods are not reliable for the other regimes.

Urban heat island (UHI) effects significantly impact building energy. Traditional UHI investigation methods are often incapable of providing the high spatial density of observations required to distinguish small-scale temperature differences in the UHI. Crowdsourcing offers a solution. Building cooling/heating load in 2018 has been estimated in London, UK, using crowdsourced data from over 1300 Netatmo personal weather stations. The local climate zone (LCZ) scheme was used to classify the different urban environments of London (UK). Inter-LCZ temperature differences are found to be generally consistent with LCZ temperature definitions. Analysis of cooling degree hours in July shows LCZ 2 (the densest urban LCZ in London) had the highest cooling demand, with a total of 1550 cooling degree hours. The suburban related LCZs 5 and 6 and rural LCZs B and D all had about 80% of the demand of LCZ 2. In December, the rural LCZs A, B and D had the greatest heating demand, with all recording arou... [more]

In the last few years, several countries have accomplished their determined renewable energy targets to achieve their future energy requirements with the foremost aim to encourage sustainable growth with reduced emissions, mainly through the implementation of wind and solar energy. In the present study, we propose and compare five optimized robust regression machine learning methods, namely, random forest, gradient boosting machine (GBM), k-nearest neighbor (kNN), decision-tree, and extra tree regression, which are applied to improve the forecasting accuracy of short-term wind energy generation in the Turkish wind farms, situated in the west of Turkey, on the basis of a historic data of the wind speed and direction. Polar diagrams are plotted and the impacts of input variables such as the wind speed and direction on the wind energy generation are examined. Scatter curves depicting relationships between the wind speed and the produced turbine power are plotted for all of the methods and... [more]

This article reviews a method of hydrogen production based on partial non-catalytic oxidation of natural gas in an original synthesis gas generator. The working principles of the unit are similar to those of liquid-propellant rocket engines. This paper presents a description of the operation and technical characteristics of the synthesis gas generator. Its application in the creation of small-scaled plants with a capacity of up to 5−7 thousand m3/h of hydrogen is justified. Hydrogen production in the developed installation requires a two-stage method and includes a technological unit for producing a hydrogen-containing gas. Typical balance compositions of hydrogen-containing gas at the synthesis gas generator’s outlet are given. To increase the hydrogen concentration, it is proposed to carry out a two-stage steam catalytic conversion of carbon monoxide contained in the hydrogen-containing gas at the synthesis gas generator’s outlet using a single Cu−Zn−cement-containing composition. Ba... [more]

Smart cities are an extremely important, multi-faceted subject, both in terms of their practical aspects and in terms of research. This is expressed, among other things, in the multitude of approaches to this concept. These approaches differ based on the emphasis placed on individual aspects: some focus more on technology, and others put more weight on social issues, while still others value sustainable development issues. Currently, an important topic of discussion about the development of the smart city—the importance of which has become even greater in the context of the COVID-19 pandemic—is the digital transformation of the city. The use of robotic process automation (RPA) tools can be a part of such a transformation, as such tools, using advanced software, enable the automation of those tasks carried out thus far by humans. Although such an approach has, to date, been widespread in the case of enterprises (in particular, those operating in the financial and BPO/SSC sectors, but le... [more]

In this paper, the authors discuss the problem of the influence of the level of electrification in African countries on their sustainable development. The first aim of the article is to determine the relationship between changes in the electrification index and changes in the indicators showing individual components of sustainable development for African countries. The analyzed indicators of sustainable development include GDP per capita, Human Deveopment Index (HDI), and the CO2 emissions per capita indicator. The second goal of the article was to develop a synthetic indicator of sustainable development. This study uses the method of relationship research based on Gray Systems Theory—Gray Incidence Analysis. The main conclusion from the research carried out is that improving access to electricity is a necessary condition for the sustainable development of African countries. The lack of improvement in the availability of electricity is a basic barrier to development, especially in the... [more]

One of the key challenges of developing countries is to tackle the mitigation of the impacts of rapid and uncontrolled urbanization. Assessing this phenomenon is crucial to lessen the consequences for the environment and society. ‘Literature has been concentrated in planning strategies for the cities’ adaptation and engagements to the principles of green development ensuring a long-term quality of life for their citizens. Hereby, smart technologies and applications consist of two of the most encouraging concepts for solutions for achieving the 2030 and 2050 horizon targets towards clean energy transition and carbon neutrality. In academia, scholars have already raised the importance of ‘smartness’ to define the adaptative patterns for the global pressures of climate change and uncontrolled urban growth. The mitigation of these phenomena is crucial to ensure the cities’ future and lessen their impacts. This study seeks a strategic and smart-driven vision to leverage smartness on the phe... [more]

This research proposes a generic smart cloud-based system in order to accommodate multiple scenarios where agriculture farms using Internet of Things (IoTs) need to be monitored remotely. The real-time and stored data are analyzed by specialists and farmers. The cloud acts as a central digital data store where information is collected from diverse sources in huge volumes and variety, such as audio, video, image, text, and digital maps. Artificial Intelligence (AI) based machine learning models such as Support Vector Machine (SVM), which is one of many classification types, are used to accurately classify the data. The classified data are assigned to the virtual machines where these data are processed and finally available to the end-users via underlying datacenters. This processed form of digital information is then used by the farmers to improve their farming skills and to update them as pre-disaster recovery for smart agri-food. Furthermore, it will provide general and specific infor... [more]

(1) Introduction: The European Union is a global leader in the transition to a low-carbon economy. The community’s population has already reduced greenhouse gas emissions by 22%, while the gross domestic product (GDP) in its member states increased by 58% between 1990 and 2017. The Union has shown that economic growth is possible in the link between politics, nature, and the citizens’ eco-empathy. It has implications for both the European and global economy, infrastructure, food production, public health, and biodiversity, the formula for political stability. The hallmark of the European Union is the blending of politics, culture, and nature in its quest for climate neutrality. The community’s horizon is a zero-emission economy by 2050. (2) Theoretical framework: The cognitive assumptions of the article are the following theses: 1. The Union strives to accelerate the transition process to a regenerative growth model using technologies for obtaining and distributing energy for individua... [more]

A prerequisite for achieving high energy efficiency of water supply systems (understood as using less energy to perform the same task) is the appropriate selection of all elements and their rational use. Energy consumption in water supply systems (WSS) is closely connected with water demand. Especially in the case of oversized water supply systems for which consumers’ water demand is at least 50% less than previously planned and flow velocity in some parts of the system is below 0.01 m·s−1, this problem of excessive energy consumption can be observed. In the literature, it is difficult to find descriptions and methods of energy management for such a case. The purpose of this study was both an evaluation of the current demand of an oversized WSS and a preliminary technical analysis of the possibility for energy saving. Solutions are presented that resulted in improvements in energy management, thus increasing energy efficiency. The conducted analyses indicate the wide use of numerical,... [more]

The article pertains to the utilization of the application potential of MCDM/MCDA (Multi-Criteria Decision Making/Multi-Criteria Decision Analysis) methods in decision-making problems in the field of transport in light of sustainable development. The article consists of a theoretical and an empirical part. As part of the literature studies, a review was carried out on the latest applications of MCDM/MCDA methods for decision-making problems in the field of transport. In the empirical part, a multi-criteria analysis of the placement selection for a strip of expressway located in north-eastern Poland was carried out. For this purpose, a hybrid approach was used, consisting of three selected MCDM/MCDA methods: DEMATEL, REMBRANDT, and VIKOR. The ranking was compared with the results achieved in the EIA report of the investment and the results were obtained by using a different set of MCDM/MCDA methods that were proposed in the first part of the research, i.e., AHP, Fuzzy AHP, TOPSIS, and P... [more]

Water and energy are two of the most important resources used by humanity. Discharging highly polluting wastewater without prior treatment is known to adversely affect water potability, agriculture, aquatic life and even society. One of the greatest threats to water sources are contaminated effluents, which can be of residential or industrial origin and whose disposal in nature must comply with specific laws aimed at reducing their environmental impact. As the oil industry is closely related to energy consumption, it is among the sectors most responsible for global pollution. The damage caused by this industrial sector is present in all countries, whose legislations require companies to carry out wastewater treatment before disposal or recycling in their production process. Bacterial cellulose membranes have been shown to be efficient as filters for the removal of various contaminants, including biological and chemical agents or heavy metals. Therefore, their use could make an importan... [more]

The marine renewable energy (MRE; renewable energy captured from waves, tides, ocean currents, the natural flow of water in rivers, and marine thermal gradients, without building new dams or diversions) industry has a vital role in the U.S. clean energy strategy as we progress to meet U.S. electricity and blue economy needs with renewable, domestic energy sources. However, a thorough assessment of the U.S. marine energy permitting process from the viewpoints of both developers that propose projects and regulators that permit them has not been performed. Sharing practical experiences in this new industry is vital to increase the efficiency and effectiveness of the permitting process, identify data and information gaps, develop lessons learned, and advance the industry. This paper is a case study of qualitative findings, lessons learned, and recommendations from guided discussions, workshops, and webinars with both marine renewable energy developers and state and federal regulators that... [more]

In coastal areas, the tourism sector contributes to the local economy, generating income, employment, investments and tax revenues but the rapid urban expansion creates great pressure on local resources and infrastructures, with negative repercussions on the residents’ quality of life, but also compromising the visitor’s experience. These areas face problems such as the formation of meteorological effects known as heat islands, due to the soil sealing, and increased energy demand in the peak season. To evaluate the impact of urban growth spatial pattern and change, three strategic sustainable challenges—urban form, urban energy, and urban outdoor comfort—were selected. The progress towards sustainability was measured and analyzed in a tourist city in the Algarve region, Portugal, for the period 2007−2018, using geographic information. A set of 2D and 3D indicators was derived for the building and block scales. Then, a change assessment based on cluster analysis was performed, and three... [more]

Waste treatment consists of activities required to make sure that waste has the least practical impact on the environment. In Slovakia, more than 50% of waste is in storage. Waste development depends on the economic situation of the state. In Slovakia, there is economic intolerance of waste treatment due to the weaker economic situation of the inhabitants. The goal of this contribution is to study the development of waste production in Slovakia in regard to economic indexes of households with the aim of improving waste management. The goal is achieved by searching for a relation between economic indexes and households by a correlation matrix and by verification of polynomial dependence. According to the results of the statistical importance, we found similarity of the regions in chosen indexes by using of cluster analysis. By this method a sustainable economy and healthy environment is guaranteed and waste is used to produce energy.

For many years, SF6 has been the preferred dielectric medium in electrical power applications, particularly in high voltage gas-insulated equipment. However, with the recognition that SF6 has an extremely long atmospheric lifetime and very high global warming potential, governments have pursued emission reductions from gas-filled equipment. The electrical power industry has responded to this environmental challenge applying SF6-free technologies to an expanding range of applications which have traditionally used SF6, including gas-insulated switchgear, gas-insulated circuit breakers and gas-insulated lines or bus bars. Some of these SF6-free solutions include gas mixtures containing fluorinated compounds that have low climate impact, among them, a fluoronitrile and a fluoroketone developed as 3M™ Novec™ 4710 Insulating Gas and 3M™ Novec™ 5110 Insulating Gas, respectively. Both fluoronitrile and fluoroketone mixtures are successfully used in gas-insulated equipment currently operating o... [more]

Geological storage of CO2 in saline aquifers and depleted oil and gas reservoirs can help mitigate CO2 emissions. However, CO2 leakage over a long storage period represents a potential concern. Therefore, it is critical to establish a good understanding of the interactions between CO2−brine and cement−caprock/reservoir rock to ascertain the potential for CO2 leakage. Accordingly, in this work, we prepared a unique set of composite samples to resemble the cement−reservoir rock interface. A series of experiments simulating deep wellbore environments were performed to investigate changes in chemical, physical, mechanical, and petrophysical properties of the composite samples. Here, we present the characterisation of composite core samples, including porosity, permeability, and mechanical properties, determined before and after long-term exposure to CO2-rich brine. Some of the composite samples were further analysed by X-ray microcomputed tomography (X-ray µ-CT), X-ray diffraction (XRD), a... [more]

The modern paradigm of sustainable development is based on concepts and theories in which the needs of individuals and society, the limits of economic growth and the balance of industrial and natural systems are close to consistency [...]

The reduction of fossil CO2 emissions from key relevant industrial processes represents an important environmental challenge to be considered. To enable large-scale deployment of low carbon technologies, a significant research and development effort is required to optimize the CO2 capture systems. This work assesses various hybrid solvent-membrane configurations for post-combustion decarbonization of coal-based super-critical power plants. As an illustrative chemical solvent, Methyl-Di-Ethanol-Amine was assessed. Various membrane unit locations were assessed (e.g., top absorber, before absorber using either compressor or vacuum pump). All investigated designs have a 1000 MW net power output with a 90% decarbonization ratio. Benchmark concepts with and without carbon capture using either reactive gas-liquid absorption or membrane separation technology were also evaluated to have a comparative assessment. Relevant evaluation tools (e.g., modeling, simulation, validation, thermal integrat... [more]

Oil shortages and environmental pollution are attracting worldwide attention incrementally. Hybrid falls within one of the effective techniques for those two problems. Taking the loader with high energy consumption and high emission as the target, combined with the hydraulic hybrid technology with high power density and strong energy storage capacity, the parallel hydraulic hybrid loader (PHHL) based on brake energy regeneration is proposed. Firstly, the dynamic models of the key components of the PHHL are established, and the parameters of the part which coincides with the ordinary loader are corrected based on the V-type duty cycle. Then, consid-ering the energy recovery efficiency as well as the characteristics of the loader from the V-type duty cycle, the parameters for several major parts of the energy regeneration system (ERS) were calculated and matched. Then, based on the initial matching, the improved adaptive genetic al-gorithm (AGA) is employed to optimize the control variab... [more]

One of the most recently developed life cycle-based methods is an environmental footprint of products and organisations established by the European Commission. A special procedure of data and dataset quality assessment has been developed as a part of the environmental footprints methodology. The procedure may be recognised as vital and powerful but, at the same time, a bit complicated and time-consuming. It is worth discussing this subject and looking for potential simplification. In this paper, we suggest a possible way for simplification. We propose to remove an impact-assessment-based step from the procedure of company-specific datasets quality assessment. There are two potential benefits: a reduction in the need for expert knowledge and time savings. The threats posed are connected to the fact that all data influences the Data Quality Rating indicator of the entire dataset to the same degree. With a higher volume of data included in the assessment, there is a risk of greater differ... [more]

Three-phase isolated matrix converters enable bidirectional power conversion and galvanic isolation, and they are suitable for widespread applications in industry. However, excessive DC-link current ripple not only increases the inductor loss and switching loss but also causes more electromagnetic interference and grid current distortion. Traditionally, increasing DC-link inductance or switching frequency can reduce the current ripple to a certain extent, but it is not cost-effective due to the bulky size of the inductor and higher switching losses. To address the above issue, optimizing the modulation control strategy is more attractive. This paper proposes a new SVPWM strategy to reduce the current ripple. First, the inherent limitation of the conventional modulation scheme is revealed. Then, the new optimal modulation scheme is proposed for the isolated matrix converters to reduce the current ripple without increasing the DC-link inductor or switching frequency. Moreover, the power... [more]

Fossil fuel vehicles, emitting air toxics into the atmosphere, impose a heavy burden on the economy through additional health care expenses and ecological degradation. Air pollution is responsible for millions of deaths and chronic and acute health problems every year, such as asthma and chronic obstructive pulmonary disease. The fossil-fuel-based transportation system releases tons of toxic gases into the atmosphere putting human health at risk, especially in urban areas. This analysis aims to determine the economic burden of environmental and health impacts caused by Highway 401 traffic. Due to the high volume of vehicles driving on the Toronto Highway 401 corridor, there is an annual release of 3771 tonnes of carbon dioxide equivalent (CO2e). These emissions are mainly emitted onsite through the combustion of gasoline and diesel fuel. The integration of electric and hydrogen vehicles shows maximum reductions of 405−476 g CO2e per vehicle-kilometer. Besides these carbon dioxide emiss... [more]