The condition of the bearing is closely related to the condition and remaining life of the rotating machine. Targeting the problem of the large number of harmonic signals and noise signals during the operation of rolling bearings, and given that it is difficult to identify the fault in time, an adaptive orthogonal matching pursuit algorithm (OMP) and an improved K-singular value decomposition (K-SVD) for bearing fault feature extraction are proposed. An adaptive OMP algorithm is applied, which uses the Fourier dictionary to improve the solution method of the OMP algorithm so that it can separate the harmonic components in the signal faster and more accurately. At the same time, the stopping criterion of the adaptive sparsity is improved in dictionary learning. There is no need to manually set the sparsity in the algorithm initialization process, which avoids the problem of algorithm performance degradation due to improper sparsity settings, and improves the efficiency of the K-SVD algo... [more]

There have been numerous studies highlighting the efficacy of various bacteriophages (phages) and phage cocktails in the reduction of pathogens in food. Despite approval from legislative bodies permitting phage use in food processing environments, applied via spray or dip, there is still no information on which spray parameters should be used for successful implementation. The study here investigates phage survival diluted to 1% in distilled water (dH2O) and prepared bottled water (PBW), followed by a subsequent spray application through a fixed nozzle (530 μm) and strainer size (74 × 74 μm), with pressures of 3, 5, and 6 Bar. The survival of the phage was determined through sampling the outputs of the spray system and performing double agar overlay plaque assays. PBW decreased the phage concentration (p = 0.18) more than the dH2O (p = 0.73) prior to spray application. It was found that the PBW phage solution was less affected by the various spray parameters (p = 0.045) than the dH2O (... [more]

By increasing the resistance of seeds against abiotic and biotic stress, the possibility of cereal mold contamination and hence the occurrence of secondary mold metabolites mycotoxins decreases. The use of biological methods of seed treatment represents a complementary strategy, which can be implemented as an environmental-friendlier approach to increase the agricultural sustainability. Whereas the use of resistant cultivars helps to reduce mold growth and mycotoxin contamination at the very beginning of the production chain, biological detoxification of cereals provides additional weapons against fungal pathogens in the later stage. Most efficient techniques can be selected and combined on an industrial scale to reduce losses and boost crop yields and agriculture sustainability, increasing at the same time food and feed safety. This paper strives to emphasize the possibility of implementation of biocontrol methods in the production of resistant seeds and the prevention and reduction i... [more]

Emerging pollutants are present in wastewaters treated by conventional processes. Due to water cycle interactions, these contaminants have been reported in groundwater, surface water, and drinking waters. Since conventional processes cannot guarantee their removal or biotransformation, it is necessary to study processes that comply with complete elimination. The current literature review was conducted to describe and provide an overview of the available information about the most significant groups of emerging pollutants that could potentially be found in the wastewater and the environment. In addition, it describes the main entry and distribution pathways of emerging contaminants into the environment through the water and wastewater cycle, as well as some of the potential effects they may cause to flora, fauna, and humans. Relevant information on the SARS-CoV-2 virus and its potential spread through wastewater is included. Furthermore, it also outlines some of the Advanced Oxidation P... [more]

With the advance in gene technology, genetically modified (GM) crops have increased in recent years. GM crops offer us various benefits. However, there are potential risks of GM crops for the environment. In this study, the impacts of transgenic plants on soil microbial community structures were assessed. Two varieties of soybean (Glycine max L.) and hot pepper (Capsicum annuum L.), which introduced the herbicide-resistant gene, bar, were used in this study. The effects of GM crops on soil microbial community structures were investigated using a cultural method, the denaturing gradient gel electrophoresis (DGGE) procedure, and 16S rRNA gene sequencing on the Illumina platform. Additionally, the persistence of transgenes was monitored using a quantitative real-time PCR procedure. The cultural method, DGGE analysis, and the amplicon-based community profile indicated that soil microbial communities were not significantly different between GM and non-GM lines. The level of the bar gene in... [more]

A computational study was conducted on the addition of nitrogen (0−60 vol%) to stoichiometric hydrogen−nitrous oxide flames at various initial pressures (1−10 bar) and temperatures (300−500 K), with a special emphasis on NO, which is a major pollutant that is generated by these flames. The detailed kinetic modeling of H2−N2O−N2 flames, which was performed using the GRI 3.0 mechanism, produced the structure of the H2−N2O−N2 flames for the temperature and mass fraction profiles of 53 species, which participated in 325 elementary reactions. The NO profiles that were computed by the detailed kinetic modeling followed the trend of experimental NO profiles that have been reported in the literature for laminar premixed flames at sub-atmospheric pressures. For the examined H2−N2O−N2 flames, an increase in initial pressure resulted in a significant reduction in the NO mass fraction of the burned gas. The increase in initial temperature was also accompanied by an increase in the mass fractions o... [more]

The uplift of the Tibetan Plateau (TP) during the late Cenozoic is thought to be one of the crucial factors controlling the Asian climate. However, the complex interaction between tectonics and climate change remains unclear. The carbon and oxygen isotopes and elementary geochemistry of rocks from the early Eocene Lulehe Formation to the Miocene Youshashan Formation in the northern margin of Qaidam Basin, shows important variations in the Rb/Sr, MgO/CaO, Sr/Cu, and V/Cr ratios, together with CMI and CIA, which are interpreted as reflecting relevant regional climate and environmental changes. Combining the above mentioned parameters, we reconstructed the evolution of the sedimentary environment in the Qaidam Basin. The climate is roughly divided into four stages: (1) warm and humid; (2) cold and dry; (3) alternations of cold and dry with warm and humid; and (4) cold and arid. At the same time, there are also minor short-term changes of dry, wet, cold, and warm in each stage. The early E... [more]

Globalization has created a highly competitive and diverse market, an uncertain and risky business environment, and changing customer expectations. An effective manufacturing strategy reduces complexity and provides organizations with a well-organized manufacturing structure. However, existing research on manufacturing strategies appears scattered, lacking systematic understanding and finding no causal relationship between manufacturing strategies’ outputs (MSOs) and their importance. Therefore, this study is a pioneer in identifying the influential factors of MSOs in the adoption of Industry 4.0 (I4.0) technologies utilizing the decision-making trial and evaluation laboratory (DEMATEL) approach. This method is considered an effective method for identifying the cause-effect relationship of complex problems. It evaluates interdependent relationships among MSO factors from the perspective of academic and industry experts. Identifying cause and effect factors leads to increasing the marke... [more]

Food production is increasing year by year, with modern agriculture occupying high-fertility soils [...]

Preferential solute transport is a common phenomenon in soil, and it is of great significance to accurately describe the mechanism of pollutant transport and water and soil environmental governance. However, the description of preferential solutes still relies on applying solute breakthrough curves for model parameters fitting. At present, most of the solute breakthrough curves are obtained indoors, and with some limitations. Therefore, this study established a method for securing solute breakthrough curves based on the electrical resistivity method. The research results show that the change in soil concentration during the tracer infiltration process can be captured by establishing the fitting relationship between soil resistivity and solute concentration. Then the solute breakthrough curve can be found. Through a time moment analysis, the difference between the breakthrough curve parameters obtained by the traditional method and the resistivity method is slight; the average error is... [more]

Most of the existing research on cement slurry materials are not environmentally friendly and environmental pollution is significant. Most researchers only test its performance, but do not conduct engineering feasibility verification. In this study, the materials extracted from various wastes were used to replace part of the sulfoaluminate cement, and orthogonal experiments were designed to analyze the reaction mechanism between different materials. Finally, the optimal mixing ratio was obtained. Then, through the regression equation analysis method, digital photograph restoration technology, the finite element method and various practical engineering conditions, the feasibility of the slurry under different applicable engineering conditions was compared and analyzed. The comparison between the experimental and numerical simulation results shows that the cement slurry obtained in this study has good reliability and feasibility. It can carry out rapid grouting reinforcement. The results... [more]

Waste tires have emerged as a severe environmental threat worldwide as they create a number of disposal and landfill burden issues. In the present study, environmental pollutant crump rubber derived from waste discarded tires was reinforced with epoxy resin and prepared by means of an open-mold casting method to assess its mechanical properties. The impact of crump rubber content (0, 10, 20 and 30 vol.%) on the mechanical behavior of the composites was assessed using three-point bending tests at a constant strain rate of 0.1 and 0.01 mm/s. The stress−strain profiles of the 0.01 mm/s specimens revealed higher strains to failure compared with the 0.1 mm/s tested specimens and all the specimens showed brittle failure. Irrespective of the strain rates, tests revealed a marginal increase in the strength values of the composites and a significant increase in the modulus of all the composites compared with neat epoxy specimens. The results suggest that crump rubber can be effectively used in... [more]

Tight oil reservoirs tend to contain more natural fractures, and the presence of natural fractures leads to a greater stress sensitivity in tight oil reservoirs. It is a very challenging task to model the seepage in the volume fracturing horizontal wells considering the stress-sensitive effects. Based on the Laplace transform, Perturbation transform and Stefest numerical inversion, this paper establishes a horizontal well seepage model for volume fracturing in fractured stress-sensitive tight oil reservoirs. This model allows us to analyze and study the effect of stress sensitivity, fracture interference, dual media and complex fracture network on seepage flow in tight oil reservoirs. We apply the model to delineate the seepage stages of volume fracturing horizontal wells, it can be divided into seven seepage stages I wellbore storage flow, II surface flow stage, III transition flow, IV natural fracture system proposed radial flow, V interporosity flow, VI system proposed radial flow a... [more]

Aiming at the problem that the current research is not suitable for the evaluation of the surface ecological environmental quality in a small-scale coal mining subsidence area, a model combining the hierarchical method and the weighted method was constructed to realize the comprehensive evaluation of the surface ecological environmental quality in a small-scale subsidence area. The results showed that the change in the water and soil environment caused by coal mining subsidence was the main factor affecting the quality of the ecological environment in the subsidence area; the evaluation results in the control area and uniform subsidence area were of grade III, which was at the “general” level, and the evaluation results in the non-uniform subsidence area were of grade VI, which was at the “poor” level. Coal mining subsidence has a great impact on the quality of ecological environment in a non-uniform subsidence area.

The performance of heavy oil visbreaking in supercritical cyclohexane (SCC6H12) was evaluated, followed by a comparison with its reaction in supercritical benzene (SCC6H6). The dealkylation-based viscosity reduction in the SCC6H12 was accelerated by improving the diffusivity, through which a product viscosity (80 °C) as low as 0.5 Pa.s was readily obtained by visbreaking at 380 °C for 5 min. A competition between dealkylation and condensation took place throughout the visbreaking process. As the reaction proceeded or the temperature increased, condensation played an increasingly dominant role in the visbreaking. Unlike the inert SCC6H6, the SCC6H12 participated in the visbreaking by saturating the alkyl carbon radicals essential for dealkylation and the aromatic carbon radicals essential for condensation. The viscosity reduction efficiency of the visbreaking in the SCC6H12 was initially suppressed by the H-donation of the solvent, but recovered rapidly due to the improved diffusion env... [more]

A circular economy (CE) promotes the reuse, reincorporation and valuation of waste and by-products under the framework of sustainable development through models and indicators that evaluate scenarios of second use and reduction in non-incorporated outputs to reduce negative externalities and pressures on the dimensions of development. A CE model applied to the transformation process of RFF in agro-industries is developed, which consists in the identification of the residue coefficients of EFB (22.48% ± 0.8), fiber (15.58% ± 0.49), husk (6.03% ± 0.66) and ash (0.55% ± 1.67). Subsequently, the valuation trends of potential second use were verified through a systematic review, which allowed the construction of the scenario of avoided costs of USD 678,721.5, a product of the total use of the outputs under bioenergy and nutrient source approaches. Finally, the RRSFM indicator was constructed, which can reach the level of 72% and a degree of improvement of 26% by 2026. In parallel, the HCRRS... [more]

Slaughterhouse wastewater (SHWW) is classified as industrial waste, which is exceptionally harmful to the environment due to its high content of biological oxygen demand (BOD), chemical oxygen demand (COD), and suspended solids, which result from high organic and nutrient loading. This study used a pilot system to treat SHWW from the Kafrelsheikh Governorate slaughterhouse, which includes a three-step process. It started with sedimentation, then coagulation and flocculation using different concentrations of each: natural zeolites (Z) and Psidium guajava-leaf powder (GLP) as green and environmentally friendly agents, and alum (A) as an inorganic coagulant. The final step was filtration with physically treated rice straw (RS). Each step was judged separately by measuring the removal percentages of each analyzed pollutant, and finally, the overall process was evaluated using the same method. A jar test was used to determine the best concentration of each coagulant used. The measured pollu... [more]

In the context of climate change and the reduction in CO2 emissions from fossil fuel combustion, the integration of CO2 capture technologies in steam power plants is a key solution. The aim of this study was to analyze the use of ammonia, at different mass concentrations, in capturing post-combustion CO2 in a coal-fired power station and comparing it with the reference 30% MEA case. In this regard, a multi-criteria model was developed to establish the optimal solvent used, considering the least impact on technical performance, economic, and environmental indicators. As a result, the lowest CO2 capture cost was obtained for the CO2 capture process based on 7% NH3, with 59.07 €/tCO2. Integration of the CO2 capture process is more economically viable when the CO2 emissions tax is higher than 70 €/tCO2 for 7% NH3 and 15% NH3, 80 €/tCO2 for 5% NH3 and 30% MEA, and 90 €/tCO2 for 2% NH3. Regarding the overall efficiency, the energy penalty associated with the CO2 capture process integration v... [more]

The high intensity of solar radiation and long sunshine time in the Turpan area lead to the necessity of sunshade construction. Sunshade components can effectively block direct solar radiation and the secondary heating of buildings. Through the analysis of the importance and sensitivity of sunshade components, it was found that the importance of sunshade components accounts for the largest proportion of multi-parameters, and the sensitivity of sunshade components accounts for about 60% of the total. At the same time, the change in sunshade length has an important influence on the proportion of air conditioning energy consumption and space comfort when the sunshade length reached the 0.6 m−0.8 m range. The energy consumption curve of air conditioning no longer decreased and tended to be horizontal, which showed that a sunshade could effectively reduce the energy consumption of air conditioning, while the PMV comfort curve gradually increased and tended to be horizontal, indicating that... [more]

Efficient and reasonable utilization of waste biomass resources can not only avoid serious waste of material resources, but also solve the problem of environmental pollution. Therefore, the development of efficient and environmentally friendly waste biomass carbonization technology has important practical significance. Here, the activated carbon from orange peel (OAC) is prepared by potassium hydroxide (KOH) activation combined with high-temperature carbonization. The adsorption effects of OAC on three different pollutant aqueous solutions, methylene blue (MB), tetracycline (TC), and fluorescein sodium (NaFL), are examined. The OAC absorbent has excellent adsorption capacity for MB, TC, and NaFL pollutants of 10 mg L−1, with adsorption rates of 99.17%, 73.5%, and 94.24%, respectively. This study provides a new idea for turning waste biomass into treasure and eliminating the hidden danger of environmental pollution.

China’s LNG import volume in 2021 reached 121.356 million tons, which makes China the largest importer in the world. The ambient air vaporizer (AAV) for LNG vaporization is an ideal selection for minimizing the average monetary value of terminals and maximizing operating efficiency. However, the heat and mass transfer performance of real multi-component LNG is not the same as that of the pure component in AAV; what is more, deep cryogenic and multi-component characteristics of LNG could lead to the deterioration of heat-transfer performance, which may cause catastrophic consequences. Thus, this difficulty should be concerning and solved in its operation. Based on the law of conservation of energy and mass, a heat and mass transfer model was established that can calculate the coupled heat transfer from the LNG to the air-side of the AAV along its own length. Empirical correlations are proposed to predict some basic properties of the frost layer at the outside of the tube, where the inte... [more]

A thin-film solid-phase microextraction method with a sorbent composed of a deep eutectic solvent was developed for the preconcentration of formaldehyde from river and lake water samples. Four new deep eutectic solvents (DESs) were synthesized, each in molar ratios 1:1, 1:2, and 1:3. Among prepared compounds, the greatest efficiency in the proposed method of preconcentration of formaldehyde derivatized with Nash reagent was demonstrated by DES-3 consisting of benzyldimethylhexadecylammonium chloride and lauric acid, in a molar ratio of 1:3. For the proposed method, the parameters affecting the extraction efficiency of formaldehyde were optimized (including the choice of DES-based sorbent and desorption solvent as well as the sample volume and pH, the salting-out effect, the extraction time, and the desorption time). Under optimal conditions, the proposed method achieved good precision between 3.3% (for single sorbent) and 4.8% (for sorbent-to-sorbent) as well as good recovery ranging f... [more]

Petroleum is the most common global fossil fuel. It is a complex multi-component system mainly composed of various hydrocarbons such as alkanes, cycloalkanes, mono-, bi- and polyaromatic compounds, resins and asphaltenes. In spite of humanity’s need for petroleum, it negatively affects the environment due to its toxicity. The ecological problem is especially serious at petroleum mining sites or during petroleum transportation. Since it is not possible to replace petroleum with less toxic fuel, ways to reduce the toxic impact of petroleum hydrocarbons on the environment need to be developed. This review addresses bioremediation, a biological approach to petroleum degradation, which is mainly performed by microbes. The pathways of degradation of alkanes, alkenes and aromatic hydrocarbons are presented in detail. The effects of temperature, aeration and the presence of biogenic elements on microbial degradation of petroleum are discussed. Plant−microbe interactions involved with the biore... [more]

Based on the nonlinear piezomagnetic equation, the piezomagnetic effect of prismatic iron-cobalt alloy is analyzed by using the ANSYS finite element simulation platform. The variation of the dynamic piezomagnetic coefficient of the iron-cobalt alloy under different bias magnetic fields and different stress was studied through simulation. Referring to the working condition of the tractor force sensor and according to the principle of magnetic circuit superposition, a piezomagnetic force sensor was designed and manufactured using iron-cobalt alloy. According to the electromagnetic theory and piezomagnetic effect, the three-dimensional model and magnetic circuit mathematical model of the sensor are established, and the system simulation model of the piezomagnetic sensor was established based on the MATLAB/Simulink module. The experimental platform of the magnetostrictive force sensor was built to verify the correctness of the simulation model, and the effects of bias magnetic field and fo... [more]

In this article, the Dimethyl Carbonate (DMC) synthesis process was investigated thermodynamically based on a well-optimized DMC system for a developed configuration, according to a real industrial plant, presented by Huang et al. Exergy analysis was performed using ProSimPlus software as an efficient process modeling and simulation environment that is uniquely capable of exergy balance computations. The key operational variables such as the reflux ratio (Rr), feed temperatures, and feed tray location were varied to explore their impact on the total irreversibilities, global intrinsic efficiency, and DMC purity. The influence of the high pressure (HP) column reflux ratio was the most effective parameter on the exergy destruction and DMC purity, which also significantly increased the duties of the HP column reboiler and condenser. The steady state results are reported in comparison with those found in the literature, and an excellent match is shown between them.