In the Carboniferous−Permian period, several organic-rich black shales were deposited in a marine−continental transitional environment in the Linfen area on the eastern margin of the Ordos Basin. Integrated sedimentological and organic geochemical analyses are performed on an outcrop in order to clarify the relationship between paleoenvironment and organic matter accumulation. The results of this study show that the marine−continental transitional strata of the Upper Carboniferous Benxi Formation to Lower Permian Taiyuan and Shanxi Formation exposed in the Linfen area are composed of sandstone, shale, coal, and limestone. Total organic carbon (TOC) contents of the studied samples were mainly distributed in the range of 0.59%−35.4%, with an average of 7.32%. From Benxi Formation to Shanxi formation, the humidity gradually increased, and the climate gradually changed from hot and humid to warm and humid during Carboniferous to Permian. The deposition of the Shanxi Formation ended with th... [more]

This study develops system-level models of ammonia-fuelled powertrains that reflect the characteristics of four oceangoing vessels to evaluate the efficacy of ammonia as an alternative fuel in the marine environment. Relying on thermodynamics, heat transfer, and chemical engineering, the models adequately capture the behaviour of internal combustion engines, gas turbines, fuel processing equipment, and exhaust aftertreatment components. The performance of each vessel is evaluated by comparing its maximum range and cargo capacity to a conventional vessel. Results indicate that per unit output power, ammonia-fuelled internal combustion engines are more efficient, require less catalytic material, and have lower auxiliary power requirements than ammonia gas turbines. Most merchant vessels are strong candidates for ammonia fuelling if the operators can overcome capacity losses between 4% and 9%, assuming that the updated vessels retain the same range as a conventional vessel. The study also... [more]

The adoption of Virtual Reality (RV) technologies in prototype design and process revision has contributed to multiple industry areas. Nonetheless, the development of VR systems for engineering is a complex task, as it involves specialized teams handling low-level code development. Given these problems, the goal of this study is presenting a methodology for designing VR, through an Authoring System based on Computer-Aided Design (CAD). The presented methodology provides an easy integration of electric power substation floor plans and Virtual Reality software (VRS), as well as three-dimensional and symbol modeling conventions. Centralized software architecture was developed, composed of the CAD Editor, input manager and VRS. The methodology was evaluated through a case study applied to the conception (elaboration) of electric power substations (EPS) as part of a Research and Development (R&D) project for training and field assets supervision. The results demonstrated visual precision an... [more]

Connected vehicles have emerged as the latest revolution in the automotive industry, utilizing the advent of the Internet of Things (IoT). However, most IoT-connected cars mechanisms currently depend on available network services and need continuous network connections to allow users to connect to their vehicles. Nevertheless, the connectivity availability shortcoming in remote or rural areas with no network coverage makes vehicle sharing or any IoT-connected device problematic and undesirable. Furthermore, IoT-connected cars are vulnerable to various passive and active attacks (e.g., replay attacks, MiTM attacks, impersonation attacks, and offline guessing attacks). Adversaries could all use these attacks to disrupt networks posing a threat to the entire automotive industry. Therefore, to overcome this issue, we propose a hybrid online and offline multi-factor authentication cross-domain authentication method for a connected car-sharing environment based on the user’s smartphone. The... [more]

This study examines the relationship between urbanization, economic growth, industrial transformation, technological change, public services, demographical change, urban and natural environmental changes, and carbon emissions using a dataset of 182 prefecture-level cities in China between 2001 and 2010. Specifically, this paper differs from previous studies in two aspects. First, the extant literature has focused on how economic processes accompanying rapid urbanization affect carbon emissions in urban areas but gives little attention to the other dimensions of urbanization, including social and environmental changes, which may have important effects on carbon emissions. We assessed the effects of 17 key processes accompanying urbanization in a full range of economic, social, and environmental dimensions on carbon dioxide emissions in urban areas. The results showed that social processes accompanied with rapid urbanization had distinct effects on carbon emissions, compared to economic... [more]

Passive thermal comfort has been widely used to test the thermal performance of a building. The science of active thermal comfort is important to be connected with the science of architecture. The currently developing active thermal comfort is adaptive thermal comfort. Vernacular houses are believed to be able to create thermal comfort for the inhabitants. The present study seeks to analyze the connection between the architectural elements of vernacular houses and adaptive thermal comfort. A mixed method was applied. A quantitative approach was used in the measurement of variables of climate, while a qualitative methodology was employed in an interview on thermal sensations. The connection between architectural elements and adaptive thermal comfort was analyzed by considering the correlation among architectural features, the analysis results of thermal comfort, and the Olgyay and psychrometric diagrams. At the beginning of the rainy season, residents of exposed stone houses had the hig... [more]

The use of concentrated solar irradiation for the improvement of electric generation improvement has been implemented on different scales, mainly in photovoltaic systems. High-concentration Fresnel lenses are widely chosen for this approach in large installations, while low-concentration systems are rather applied in medium-low scales. For the latter, the improvement on electric performance was revealed, even when no solar tracking was implemented. The presented work aims to analyse a low-concentration photovoltaic installation by a numerical approach. First, the reflective surfaces were designed geometrically considering the optimal slope determined for each month. Subsequently, different simulation techniques were used separately for prediction of solar irradiation and energy production. Three criteria were selected to analyze power generation: the highest increase in total annual solar irradiance on panels with reflective surfaces, the highest total annual solar irradiance collected... [more]

Agreed upon by the UN member states, Agenda 2030 assumes joint action for long-term sustainable development. These actions are focused on the implementation of 17 Sustainable Development Goals (SDGs), where actions are assumed to lead to the suppression of negative externalities of human activity. It is stressed that the objectives of sustainable development can only be achieved through deep institutional changes in most dimensions of the economy, including the entrepreneurship dimension. Entrepreneurship plays a pivotal role in the sustainable transformation of the community, as the related activities of companies are the source of the desired structural changes. Entrepreneurial projects make the biggest contribution to the objectives of sustainable development through research and development, investment in new technologies, and innovation. The biggest threat to sustainable entrepreneurship is firms’ aggressive corporate financial strategy, which most often results from CEO overconfi... [more]

The COVID-19 pandemic and resulting containment measures have shown that energy consumption in buildings is linked to several factors, such as living habits, occupancy profiles, and heating ventilation and air conditioning (HVAC) systems. This paper addresses the influences of such factors on energy consumption in a residential building, analysing different scenarios (pre-COVID-19, lockdown, post-COVID-19), in terms of discomfort and energy needs, through the new hourly calculation method (UNI EN ISO 52016). Energy and environmental effects were studied in a real case study near Rome by varying occupancy profiles, lighting and appliance schedules, and HVAC systems. Results show that, during the heating period, the lockdown scenario led to the lowest hours of discomfort (−29% on average), but the highest in the cooling period (up to +154%, +28% on average). The same scenario led to reasonable reduction of energy needs for heating (−14%), but also highlighted a significant increase (+60%... [more]

The steelmaking processes are considered extremely energy-intensive and carbon-dependent processes. In 2018, it was estimated that the emissions from global steel production represented 7−9% of direct emissions generated by fossil fuels. It was estimated that a specific emissions value of 1.8 tCO2 per ton of steel was produced due to the carbon-dependent nature of the traditional blast furnace and basic oxygen furnace (BF-BOF) route. Therefore, it is necessary to find an alternative solution to the BF-BOF route for steel production to counteract this negative trend, resulting in being sustainable from an environmental and economic point of view. To this concern, the objective of this work consists of developing a total cost function to assess the economic convenience of steelmaking processes considering the variability of specific market conditions (i.e., iron ore price, scraps price, energy cost, etc.). To this purpose, a direct reduction (DR) process fueled with natural gas (NG) to f... [more]

A lifecycle model was established to explore the efficiency, economy, and greenhouse gas emissions of a non-phase-transition drying pyrolysis and mass conversion technology, based on the principle of lifecycle assessment. The evaluation scope included straw collection and transportation, drying and crushing, biomass pyrolysis, charcoal processing, and waste heat utilization. The results show that the energy output/input ratio for non-phase-transition drying pyrolysis was 20.43, and the energy efficiency was high. The pure profit from treating wet straw was USD 45.32 per ton, the profit margin of sales was 52.11%, and the economic benefit was high. The equivalent emission of CO2 was 34.10 g·MJ−1, demonstrating high environmental benefits. Therefore, non-phase-transition drying pyrolysis and mass conversion technology is a potential biomass utilization technology with energy, economic, and ecological benefits.

The major demand of energy in today’s world is fulfilled by the fossil fuels which are not renewable in nature and can no longer be used once exhausted. In the beginning of the 21st century, the limitation of the fossil fuels, continually growing energy demand, and growing impact of green-house gas emissions on the environment were identified as the major challenges with current energy infrastructure all over the world. The energy obtained from fossil fuel is cheap due to its established infrastructure; however, these possess serious issues, as mentioned above, and cause bad environmental impact. Therefore, renewable energy resources are looked to as contenders which may fulfil most energy requirements. Among them, hydrogen is considered as the most environmentally friendly fuel. Hydrogen is clean, sustainable fuel and it has promise as a future energy carrier. It also has the ability to substitute the present energy infrastructure which is based on fossil fuel. This is seen and projec... [more]

Combustion of energy fuels or organic waste is associated with the emission of harmful gases and aerosols into the atmosphere, which strongly affects air quality. Air quality monitoring devices are unreliable and measurement gaps appear quite often. Missing data modeling techniques can be used to complete the monitoring data. Concentrations of monitored pollutants can be approximated with regression modeling tools, such as artificial neural networks. In this study, a long-term set of data from the air monitoring station in Zabrze (Silesia, South Poland) was analyzed. Concentration prediction was tested for the main air pollutants, i.e., O3, NO, NO2, SO2, PM10, CO. Multilayer perceptrons were used to model the concentrations. The predicted concentrations were compared to the observed ones to evaluate the approximation accuracy. Prediction errors were calculated separately for the whole concentration range as well as for the specified concentration subranges. Some different measures of e... [more]

Increased pressure is being applied to industrial wastewater treatment facilities to adhere to more stringent regulations for the discharge of treated wastewater and to improve energy efficiency of the process. Nitrogen and phosphorous removal can be challenging to achieve efficiently, and in the case of phosphorous removal, can often necessitate the use of chemicals. There is a major drive globally to improve wastewater treatment infrastructure, whilst simultaneously reducing the carbon footprint of the process. The intermittently aerated sequencing batch reactor offers a modification of the well-known sequencing batch reactor process that can enable lower energy requirements than conventional sequencing batch reactor processes and can facilitate enhanced nutrient removal capacities. However, to date much of the previous literature has focused on relatively short laboratory-scale trials (often with synthetic wastewater) which may not be representative of larger scale system performanc... [more]

Carbon dioxide and/or dry methane reforming serves as an effective pathway to mitigate these greenhouse gases. This work evaluates different oxide supports including alumina, Y-zeolite and H-ZSM-5 zeolite for the catalysis of dry reforming methane with Nickel (Ni). The composite catalysts were prepared by impregnating the supports with Ni (5%) and followed by calcination. The zeolite supported catalysts exhibited more reducibility and basicity compared to the alumina supported catalysts, this was assessed with temperature programmed reduction using hydrogen and desorption using carbon dioxide. The catalytic activity, in terms of CH4 conversion, indicated that 5 wt% Ni supported on alumina exhibited higher CH4 conversion (80.5%) than when supported on Y-zeolite (71.8%) or H-ZSM-5 (78.5%). In contrast, the H-ZSM-5 catalyst led to higher CO2 conversion (87.3%) than Y-zeolite (68.4%) and alumina (83.9%) supported catalysts. The stability tests for 9 h time-on-stream showed that Ni supporte... [more]

The European Union (EU), which has led international discussions on global warming, officially announced its plan for the Carbon Border Adjustment Mechanism (CBAM) in July 2021. Many existing studies have indicated the CBAM will curtail greenhouse gases, and will subsequently be positive in terms of reducing global warming. However, serious legal issues and trade disputes are expected in terms of the compatibility of the CBAM with the trade rules of the General Agreement on Tariffs and Trade (GATT). Contrary to the EU’s explanation, the international community has a strong view of CBAM as a new trade barrier under the guise of preventing global warming. Above all, this is because it is an arbitrary measure by the EU and not the one that has been internationally agreed upon. Therefore, this paper tries to identify the pitfalls and estimate the global cost of CBAM, arguing that the mechanism is not in line with international trade rules, and that many countries will not sit back and suff... [more]

The justification for the construction of a wind farm depends primarily on two factors. The first one is the availability of the area with significant windiness; the second one is the environmental conditions in the selected location. The aim of this paper was to demonstrate the need for parallel noise and energy analyses during the design of a turbine location and selection of its type on the wind farm. The noise analyses were performed according to ISO 9613-2. A detailed analysis of wind conditions in a given location is a basic activity to determine the profitability of a wind power plant foundation. The main environmental impact of WF is noise emission. The examples of wind turbines’ selection optimally utilizing wind resources in two particular locations are presented. Six wind turbines were analyzed for each location. The choice of a wind turbine for the examined location was determined by the parameters of the device, the results of annual wind measurements, and acceptable noise... [more]

We investigated the effect of agreements related to climate change on bilateral trade, using the Poisson pseudo-maximum likelihood (PPML) estimator on a large dataset that requires computing high-dimensional fixed effects. This study develops the concordance between commodities based on harmonized systems (HS) and technologies defined by both international and cooperative patent classifications (IPC/CPC). Using the OECD ENV-TECH classification, covering 169 exporting countries and 179 importing countries worldwide from 1991 to 2019, we determined the relationship between HS commodities and IPC/CPC climate change technologies. The main findings show that, first, the Kyoto Protocol has increased international bilateral trade in the climate change industry, while the Montreal Protocol has led to the opposite effect. In addition, the impact of environmental stringency on international bilateral trade in climate-related industries was negative and significant, refuting the Porter Hypothesis... [more]

The alternative control concept using emission from the machine has the potential to reduce energy consumption in HVAC systems. This paper reports on a study of alternative inputs for a control system of HVAC using machine learning algorithms, based on data that are gathered in a welding area of an automotive factory. A data set of CO2, fine dust, temperatures and air velocity was logged using continuous and gravimetric measurements during two typical production weeks. The HVAC system was reduced gradually each day to trigger fluctuations of emission. The data were used to train and test various machine learning models using different statistical indices, consequently to choose a best fit model. Different models were tested and the Long Short-Term Memory model showed the best result, with 0.821 discrepancy on R2. The gravimetric samples proved that the reduction of air exchange rate does not correlate to escalation of fine dust linearly, which means one cannot rely on just gravimetric... [more]

We studied new micro-perforated diffuser concepts for the aeration process in wastewater treatment plants and evaluated their aeration efficiency. These are micro-perforated plate diffusers with orifice diameters of 30 µm, 50 µm and 70 µm and a micro-perforated tube diffuser with an orifice diameter of 50 µm. The oxygen transfer of the diffuser concepts is tested in clean water, and it is compared with commercial aerators from the literature. The micro-perforated tube diffuser and micro-perforated plate diffusers outperform the commercial membrane diffusers by up to 44% and 20%, respectively, with regard to the oxygen transfer efficiency. The most relevant reason for the improved oxygen transfer is the fine bubble aeration with bubble sizes as small as 1.8 mm. Furthermore, the more homogenous cross-sectional bubble distribution of the micro-perforated tube diffuser has a beneficial effect on the gas mass transfer due to less bubble coalescence. However, the pressure drop of micro-perfo... [more]

In a planet with limited resources, climate change is a severe problem, intensified by industrial development. This is particularly important in the construction sector. According to the International Energy Agency (2021), the construction sector is responsible for 40% of the global energy consumption and 36% of CO2 emissions. In this way, sustainable architectural solutions should be a priority in our fight against climate change, for it is necessary to propose solutions that help to reuse existing resources, thus reducing consumption. In this sense, the rehabilitation of buildings with solutions that favor the circular economy will become a key element in the construction sector. This work provides the design of a facade for building rehabilitation based on the circular economy paradigm, which is implanted in a model building as a case study. The HULC tool quantifies the improvement in energy efficiency that this rehabilitation entails when compared to a conventional facade. With the... [more]

Evaluating environmental conditions that trigger fire-fighting equipment is one of the primary design tasks that have to be taken into account when engineering electrical systems supplying such devices. All of the solutions are aimed at, among others, preserving environmental parameters in a building being on fire for an assumed time and at a level enabling safe evacuation. These parameters include temperature, thermal radiation, visibility range, oxygen concentration, and environmental toxicity. This article presents a new mathematical model for heat exchange between the environment and an electric cable under thermal conditions exceeding permissible values for commonly used non-flammable installation cables. The method of analogy between thermal and electrical systems was adopted for modelling heat flow. Determining how the thermal conductivity of the cable and the thermal capacity of a conductor-insulation system can be applied to calculate the wire temperature depending on the heat... [more]

Fiscal sustainability is an issue of great concern for governments globally and air pollution control has become an important factor affecting fiscal sustainability. This study aims to examine the impact of air pollution on fiscal sustainability in the short and long run. We conducted an empirical analysis based on air pollution and local government debt data on China’s prefecture-level cities in 2014−2019, using regression discontinuity design (RDD) and a panel data model. The results show that air pollution reduces the debt burden of governments in the short run. However, in the long run, addressing the negative impacts of air pollution adds to the debt burden of local governments, hindering fiscal sustainability. Fiscal freedom and the level of public services significantly moderate the negative impact of air pollution on fiscal sustainability. A higher level of fiscal freedom generally indicates a greater incentive for local governments to raise pollutant emission standards, streng... [more]

The policies against climate change require the reduction of greenhouse gas emissions of marine transportation. To reach the planned goals, the most promising approach is working both on ships improvement and ports redesign. The latter must enable the new green ships supply with sustainable electrical energy, by integrating shore connection systems, local renewables, and energy storage systems. In this paper, a methodology to obtain such an objective is proposed, capable of taking into account both ships’ and ports’ characteristics. The methodology workflow is explained through a case study, where two shore connection power sizes and two different operative approaches for recharging the ship onboard energy storage are considered. A discussion about the most suitable energy storage technologies is also provided. The case study shows how the methodology can be applied, as well as demonstrating that the port infrastructure has a direct effect on the ship environmental performance.

The cold chain is responsible for perishable products preservation and transportation, maintaining a proper temperature to slow biological decay processes. Often the efficiency of the cold chain is less than ideal, significantly increasing food waste and energy consumption. Refrigerated transport is a critical phase of the cold chain because of its negative impact on energy consumption and greenhouse gas emissions. It is estimated that around 15% of global fossil fuel energy is used in the refrigerated transport sector, so there has been a growing interest in the last decades in the optimization of these systems in order to reduce their environmental impact. Vapor compression refrigeration units, usually powered by means of a diesel engine, are the most commonly used systems in road refrigerated transport. This paper provides a review of (a) currently used systems and alternative technologies that could reduce the environmental impacts of road refrigerated transport and (b) optimizatio... [more]