In this article, the conditions and determinants of the introduction and development of the circular economy (CE) in Poland were presented against the background of the widely discussed essence of circular economy, with particular emphasis on the Polish mining sector. In addition, the European Green Deal—an action plan for a sustainable economy for the entire European Union, was discussed. Particular attention was paid to the role of human resources in the area of supporting research and stimulating innovation, and in the area of activating education and training. These issues are further discussed in the next chapter by presenting the forms, ways and scope of education for sustainable development in the international context. Another chapter describes the EIT Raw Materials KAVA 5 RIS competition in Poland (in Kraków) at AGH-UST from 2019 to 2022, an international project in a consortium of four universities whose main objective is to strengthen entrepreneurship in the V4 countries in... [more]

Improving national electricity mixes and increasing a share of renewable energy covered by credible and reliable tracking systems are vital topics, also in a context of life cycle assessment. There are many publications devoted to the relevance of energy in the life cycle of products, but only few LCA examples applying residual mixes have been found in the literature. The paper presents the results of an LCA study for a refrigerator calculated with using different electricity mixes and technologies. The life cycle was divided into eight stages and the electricity consumption was modelled as renewable energy, national residual mix, or national supplier mix. Electricity mixes for three different countries were selected and used. The study aimed to answer the following questions: “what are the most relevant elements in the life cycle of the analysed refrigerator?”, “do the elements change if various electricity mixes are applied?”, and “what differences are there in the environmental impa... [more]

Green energy by PV systems reduces the dependence on fossil fuel-based power plants. Maximizing green energy to meet the demand reduces the burden on conventional power plants, hence lesser burning and greenhouse gases (GHG) emissions. For this purpose, this study draws a relationship between tracking schemes of the PV systems to GHG mitigation potential. The best fit location for detailed analyses is selected among the 15 most populous cities of Australia. The solar radiation potential is increased to 7.78 kWh/m2/d through dual axes tracking compared to 7.54, 6.82, 5.94, 5.73 kWh/m2/d through the one axis, azimuth based, fixed-tilted, and fixed-horizontal surface schemes, respectively. Through the dual axes tracking scheme, a 1 MW PV system per annum energy output avoids the burning of 796,065.3 L of gasoline, 4308.7 barrels of crude oil which is equal to the mitigation of 1852.7 tCO2 equivalent GHGs. Concisely, the PV system, through its green energy output, can avoid the release of... [more]

The present study shows the effects of environmental conditions (atmospheric temperature, pressure and relative humidity) due to altitude changes on performance, fuel consumption and emissions in a naturally aspirated diesel engine. Due to changes in altitude, the atmospheric conditions are altered, mainly the air density, associated to hydrostatic pressure, temperature profile and humidity and relative nitrogen/oxygen ratio, thus modifying the engine intake conditions. The study considers changes in altitude from sea level to 2500 m above sea level, which are representative of the orographic conditions in Ecuador. As a main part of this research, a parametric study of variation of atmospheric temperature, pressure and relative humidity is carried out in AVL BOOST™, showing the effects on mean effective pressure, fuel consumption and specific pollutant emissions (CO2, NOx, CO and soot). The study considers effects at regional level (change from an altitude to another) and local level (... [more]

The article is devoted to the four-year (2017−2020) monitoring of gas emissions from the bottom of the Seyakha Crater, located in the central part of the Yamal Peninsula (north of Western Siberia). The crater was formed on 28 June 2017 due to a powerful blowout, self-ignition and explosion of gas (mainly methane) at the site of a heaving mound in the river channel. On the basis of a comprehensive analysis of expeditionary geological and geophysical data (a set of geophysical equipment, including echo sounders and GPR was used) and remote sensing data (from space and with the use of UAVs), the continuing nature of the gas emissions from the bottom of the crater was proven. It was revealed that the area of gas seeps in 2019 and 2020 increased by about 10 times compared to 2017 and 2018. Gas in the cryolithosphere of the Arctic exists in free and hydrated states, has a predominantly methane composition, whereas this methane is of a biochemical, thermogenic and/or mixed type. It was conclu... [more]

TMAH is quaternary ammonium salt, consists of a methylated nitrogen molecule, and is widely used in the electronics industry as a developer and silicon etching agent. This substance is toxic and fatal if ingested. It can also cause skin burns, eye damage, and organ damage. Moreover, TMAH exhibits long-lasting toxicity to aquatic systems. Despite this known toxicity, the authorities currently do not provide emission limits (i.e., discharge concentrations) for wastewater by EU regulation. The current scenario necessitates the study of the processes for industrial wastewater containing TMAH. This work aims to present a successful example of the treatment process for the degradation of TMAH waste solutions of the E&S industry. Research was conducted at the pilot scale, and the process feasibility (both technical and economic) and its environmental sustainability are demonstrated. This process, which treats three exhausted solutions with a high concentration of toxic substances, is consider... [more]

This study relates to developing future alternative fuels and focuses on the effects of a fuel’s molecular structure on its properties and performance in advanced propulsion systems. The tribological performance of various biomass-derived oxygenated alternative fuels, including butanol, pentanol, cyclopentanol, cyclopentanone, and gasoline and their blends with diesel, was investigated. Lubricity tests were conducted using a high-frequency reciprocating rig (HFRR). Cyclopentanone-diesel and cyclopentanol-diesel blends result in smaller wear scar sizes compared to using their neat forms. A lower steel disc contaminated with the alternative fuels during the HFRR tests resulted in worn surface roughness values lower than those of the neat diesel by up to 20%. It is believed that these reductions are mainly due to the presence of the hydroxyl group and the carbonyl group in alcohols and ketones, respectively, which make them more polar and consequently helps the formation of the protective... [more]

The aim of the conducted research was to assess the effectiveness of the nitrification process, at different concentrations of ammonium nitrogen, in biologically treated wastewater in one of the largest municipal and industrial wastewater treatment plants in Poland. The studies also attempted to acclimate nitrifying bacteria to the limited concentration of ammonium nitrogen and determined the efficiency of nitrification under the influence of acclimated activated sludge in the biological wastewater treatment system. The obtained results indicate that the concentration of ammonium nitrogen above 60.00 mg·dm−3 inhibits nitrification, even after increasing the biomass of nitrifiers. The increase in the efficiency of the nitrification process in the tested system can be obtained by using the activated sludge inoculated with nitrifiers. For this purpose, nitrifiers should be preacclimated, at least for a period of time, allowing them to colonize the activated sludge. The acclimated activate... [more]

The idea of sustainability has been exerting an impact on public awareness for nearly five decades. However, representatives of various sciences interpret it in many different ways, and there were several hundred definitions of it already at the end of the 20th century. There is no doubt that a proper understanding of the essence and meaning of sustainable development by opinion leaders representing various scientific disciplines determines transformations in particular sectors of the economy, especially in the energy sector. Economics, which considers the relationship between the economy and the environment, seems to have a special role with regard to this issue. Models and concepts of managing limited environmental resources are considered based on this science. Thus, economists have a kind of greater responsibility for the shape and direction of development, and especially for whether it will be durable and balanced. With these issues in mind, the aim of this paper is to review and... [more]

The article describes a compression-ignition engine working with a dual-fuel system installed in diesel locomotive TEP70 BS. The model of the locomotive engine has been created applying AVL BOOST and Diesel RK software and engine performance simulations. Combustion characteristics have been identified employing the mixtures of different fuels. The paper compares ecological (CO2, NOx, PM) and energy (in-cylinder pressure, temperature and the rate of heat release (ROHR)) indicators of a diesel and fuel mixtures-driven locomotive. The performed simulation has shown that different fuel proportions increased methane content and decreased diesel content in the fuel mixture, as well as causing higher in-cylinder pressure and ROHR; however, in-cylinder temperature dropped. CO2, NOx and PM emissions decrease in all cases thus raising methane and reducing diesel content in the fuel mixture.

In microgrid projects, social ownership involves aspects beyond their operation that may compromise the sustainability of the system. For this reason, the development of analysis methods to assess the feasibility and impact during the design stages of these solutions is of growing interest. Recent studies have proposed methods that allow an individual analysis of technological components and social behaviors. However, a complete evaluation of the performance and the impact of these projects should allow the simultaneous evaluation of the behavior of these subsystems, allowing the analysis of their interactions and effects in a dynamic way. Accordingly, this paper presents simulation and emulation models to evaluate the impact of a microgrid in isolated communities. These models contemplate sublevels that consider the energetic, automation and computational aspects in the microgrids and a multi-agent system (MAS) that is used to study the environmental and economic impact of the microgr... [more]

When looking for energy-saving solutions, one should bear in mind the savings that can be obtained through behavioral changes. The article shows that a simple incentive can have a statistically significant impact on employees’ pro-ecological behavior. First, the introduction refers to the general perspective of striving for a global implementation of the Sustainable Developments Goals (SDGs). Additionally, the stakeholders’ point of view is presented, based on reports submitted to the Responsible Business Forum competition (Poland). The two motivating trends are referenced, which include increasing the contribution of powering office buildings to the overall energy demand and increasing the appreciation of behavioral changes as alternatives or complements to technological solutions in pursuit of the SDGs. The following sections of the article present an experiment carried out at one faculty of the University of Warsaw, which consisted of checking the effect of the incentive to lower th... [more]

Geological sequestration of acid gases, including CO2, is now a growing solution to prevent progressive Earth climate change. Disposal of environmentally harmful greenhouse gases must be performed safely and securely to minimise leakage risk and possible uncontrolled emissions of injected gases outside the sequestration structure. The paper describes a series of research activities at the Borzęcin sequestration site located in western Poland, which were designed to study the migration paths of injected acid gases (mainly mixture of CO2 and H2S) into the water-bearing layers underlying natural gas reservoir. Along with understanding the nature and dynamics of acid gases migration within the sequestration structure, the research was also addressed to assess its leak-tightness and the long-term safety of the entire reinjection facility. As a part of the research works, two downhole sampling campaigns were completed in 2018−2019, where samples of water underlying the Borzęcin reservoir wer... [more]

The oxyfuel combustion of a model MSW (municipal solid waste) under various conditions was carried out in a lab-scale reactor. The aim was to study the behavior of MSW and identify challenges and opportunities associated with the development of this technology in the context of integration with CCS (carbon capture and storage). The experimental results show the effects of the oxidizer composition on the combustion process. Complete combustion can be attained under a variety of oxyfuel conditions, and the differences highlighted with O2/CO2 as an oxidizer compared with O2/N2 do not constitute showstoppers. MSW oxyfuel combustion hence offers a great potential for the combined (1) treatment of waste (contaminants’ destruction, volume, and weight reduction), (2) production of heat/power, and (3) CCS with negative CO2 emissions.

The three-dimensional tubular heat exchanger has excellent performance in single-phase flow, but its performance in gas solid two-phase flow is still lacking research. In this paper, analysis and comparison of heat exchanger prototypes made up of four different three-dimensional tubes by different comprehensive performance evaluation methods are carried out through experimental research and theoretical analysis. The research results show that the ratio of the long axis to the short axis of the three-dimensional tube has an important influence on its heat transfer performance and flow resistance. Furthermore, a reasonable ratio can be obtained by comparing its comprehensive performance. Among the comprehensive performance analysis results of four kinds of three-dimensional tubes, the comprehensive performance factor ηo-I of type I is the best which achieves the purpose of heat transfer enhancement. Results from the current research could provide beneficial guidance for further design an... [more]

The era of Industry 4.0 is characterized by the use of new telecommunications ICT technologies and networking of the economy. This results in changes both in the way businesses operate and in customer expectations of products offered on the market. The use of modern ICT technologies has made it possible to create cyber-physical systems based on intelligent machines and devices that communicate with each other in real time and allow the integration of resources from different companies to carry out joint production projects. Today’s consumer expects products tailored to their needs and expectations. These expectations can be met by leveraging the potential of highly specialized manufacturing service companies centered around e-business platforms. The article presents the results of research using bibliometric analysis and the results of surveys conducted among small and medium-sized enterprises. The concept of e-business platforms supporting rapid prototyping of temporary networks of co... [more]

In the next 20 years, the fossil energy must become a guarantor of the sustainable development of the energy sector for future generations. Significant threats represent hurdles in this transition. This study identified current global trends in the energy sector and the prospects for the development of energy until 2035. The importance of risk assessment in scenario forecasting based on expert judgments was proven. Three contrasting scenarios, #StayHome, #StayAlone, and #StayEffective, for the development of fossil energy, all based on comprehensive analysis of global risks by expert survey and factor analysis, were developed. It was concluded that fossil energy is mandatory with integration of advanced technologies at every stage of the production of traditional energy and of renewable energy as an integral part of the modern energy sector. Based on the results of the study, nine ambitious programs for the development of sustainable energy are presented. They require the creation and... [more]

A model is presented which covers the global greenhouse gas emissions (GHG emissions) and the energy consumption (fuels, electricity) in five sectors of end users, industry, transport, buildings, agriculture, and fugitive emissions. The electricity sector is also considered, but the associated GHG emissions are reallocated to the five end users. Different GHG reduction measures were calculated ranging from substitution of coal for electricity generation by renewables, electrification of road transport and buildings, restructuring of the sector industry to finally a 50% reduction of both food waste and meat consumption. To elucidate the consequences of global warming, future emission scenarios were also incorporated. One major conclusion is that the world can only reach the 2-degree climate target if electricity is only produced by renewables, and if transportation, buildings, and the industry are completely electrified by 2050. Compared to today, the electricity production by renewable... [more]

This study examined the use of zoned ventilation systems using a coupled CONTAM/EnergyPlus model for new California dwellings. Several smart control strategies were developed with a target of halving ventilation-related energy use, largely through reducing dwelling ventilation rates based on zone occupancy. The controls were evaluated based on the annual energy consumption relative to continuously operating non-zoned, code-compliant mechanical ventilation systems. The systems were also evaluated from an indoor air quality perspective using the equivalency approach, where the annual personal concentration of a contaminant for a control strategy is compared to the personal concentration that would have occurred using a continuously operating, non-zoned system. Individual occupant personal concentrations were calculated for the following contaminants of concern: moisture, CO2, particles, and a generic contaminant. Zonal controls that saved energy by reducing outside airflow achieved typic... [more]

According to the International Energy Agency (IEA), only a tiny fraction of the full potential of energy from biomass is currently exploited in the world. Biogas is a good source of energy and heat, and a clean fuel. Converting it to biomethane creates a product that combines all the benefits of natural gas with zero greenhouse gas emissions. This is important given that the methane contained in biogas is a more potent greenhouse gas than carbon dioxide (CO2). The total amount of CO2 emission avoided due to the installation of biogas plants is around 3380 ton/year, as 1 m3 of biogas corresponds to 0.70 kg of CO2 saved. In Russia, despite the huge potential, the development of bioenergy is rather on the periphery, due to the abundance of cheap hydrocarbons and the lack of government support. Based on the data from an agro-industrial plant located in Central Russia, the authors of the article demonstrate that biogas technologies could be successfully used in Russia, provided that the Rus... [more]

Globalization has contributed to several advances in technology including linking people around the globe and driving us to modern economies. With fast economic growth and industrialization progress, the negative impact of globalization on biodiversity can be easily ignored. Globalization is an undeniable factor in our planetary devastation from pollution to global warming and climate change. The major intention of our recent analysis was to examine the globalization, energy consumption, trade, economic growth, and fuel importation to determine the ecological footprint in Pakistan by taking the annual data variables from 1974−2017. A linear ARDL (autoregressive distributed lag) technique with limited information maximum likelihood and linear Gaussian model estimation were utilized to check the variables association. Outcomes show that in the long run, globalization, energy usage, trade, and GDP growth have consistently productive interactions with the ecological footprint, while an exa... [more]

Large industrial plants, power plants, and combined heat and power plants are popularly believed to be the main sources of point emissions, affecting both local and global air quality. This is because these installations emit significant amounts of pollutants at high altitudes every year. In this study, we investigate the impact of two solid fuel (hard coal)-fired CHP plants located within the urban agglomeration on the air quality of the city of Lodz in Poland (Europe). We used an OPA03 computer software to model the spatial distribution of pollutants. The results show that the annual average concentrations of pollutants were highest at an altitude of 25 m above ground level and decreased at lower measurement heights. The concentrations did not exceed permissible levels, reaching only 4% of national and international regulatory limits. We also made field measurements during the winter heating period, using an unmanned aerial vehicle (UAV) equipped with sensors to map the distributions... [more]

Sustainable development is now an important direction for the further development of all economies in the world. It is important to balance economic development with the impact on the environment and our planet. Another direction in the development of management sciences is the emergence of the concept of Corporate Social Responsibility, which considers this impact in three key aspects—economic, environmental and social—in terms of microeconomics. This concept gives companies specific guidelines and tools that minimize their negative impact on the environment. Reducing the negative impact of companies influences the environment and this is what is mainly associated with them. However, companies should also pay attention to internal consistency and caring for employees. Company practices such as the exploitation of people, including children, and injustice in the workplace are some of the factors that can be observed in less developed countries. The article focuses on the presentation o... [more]

In general, the biomass raw materials burned by biomass power plants generally have the characteristics of variable fuel types, high moisture content, and high volatile content. In this paper, a 130 t/h biomass circulating fluidized bed (BCFB) model was established on the MWorks platform with Modelica language. The influence of biomass type changes on operation parameters, the corresponding steady-state characteristics, and the dynamic characteristics of the BCFB were carried out. The temperature corresponding to the combustion of pine was overall higher than that of the other fuels, and the flue gas from the combustion of pine had the highest concentration of SO2, up to 520.49 mg/Nm3. The flue gas from the combustion of pure cotton sticks had the highest concentration of NO, up to 254.34 mg/Nm3. The changes of fuel type and moisture content all have a great influence on the operation of BCFBs. The emission of pollutants was not only related to the element content of fuel, but also clo... [more]

Zero waste according to the Zero Waste International Alliance is an ethical, economical, effective and forward-thinking concept whereby people can change their lifestyles and habits to one that mimics natural cycles, where all discarded materials are designed to become resources that can benefit others. The aim of the study was to determine the knowledge of the Zero Waste problem (subject of the study) by respondents in selected Central and Eastern European countries, including Poland, Slovakia (EU countries) and Ukraine (EU associated country), as well as to verify whether the Zero Waste rules are known and implemented in sustainable activities of residents in the studied countries. The research was carried out using the CAWI method. The research tool was a structured questionnaire. The analysis of data from the countries covered by the study showed a significant relationship between the basic elements in the daily functioning of households related to the protection of the environment... [more]