A commercial 43 m wind turbine blade was tested under static loads. During these tests, loads, displacements, and local strains were recorded. In this work, the blade was modeled using the finite element method. Both a segment of the spar structure and the full-scale blade were modeled. In both cases, conventional outer mold layer shell and layered solid models were created by means of an in-house developed software tool. First, the boundary conditions and settings for modeling the tests were explored. Next, the behavior of a spar segment under different modeling methods was investigated. Finally, the full-scale blade tests were conducted. The resulting displacements and longitudinal and transverse strains were investigated. It was found that for the considered load case, the differences between the shell and solid models are limited. Thus, it is concluded that the shell representation is sufficiently accurate.

To improve the reactor efficiency, this study investigated the influence of temperature on the biological hydrogen methanation (BHM) in trickle-bed reactors (TBR). Rising temperatures increase the metabolic activity of methanogenic microorganisms, thus leading to higher reactor specific methane formation rates (MFR). In order to quantify the potential for improved performance, experiments with four different operating temperatures ranging from 40 to 55 °C were carried out. Methane content increased from 88.29 ± 2.12 vol % at 40 °C to 94.99 ± 0.81 vol % at 55 °C with a stable biological process. Furthermore, a reactor specific methane formation rate (MFR) of up to 8.85 ± 0.45 m³ m−3 d−1 was achieved. It could be shown that the microorganisms were able to adapt to higher temperatures within hours. The tests showed that TBR performance with regard to BHM can be significantly increased by increasing the operating temperature.

(1) Background: To increase the biochemical productivity and to reduce the production cost of microalgal biodiesel, this study aimed to investigate the effects of CO₂ on biomass, fatty acids, carbon-hydrogen, and biochemical accumulation of the marine diatom, Amphora coffeaeformis RR03 (A. coffeaeformis) RR03. (2) Methods: Fatty acid composition of the dry biomass of A. coffeaeformis RR03 was analysed using Gas chromatography-mass spectrometry (GC-MS). (3) Results: The results showed that A. coffeaeformis RR03 contained high biomass productivity and biochemical composition in different cultivation conditions. A. coffeaeformis RR03 showed maximum growth of 5.2 × 10⁶/mL on 21st day cultivation under CO₂ supply. The bio-crude oil production from A. coffeaeformis RR03 was 36.19 megajoule (MJ). GC-MS analysis found that the dry biomass of A. coffeaeformis RR03 contained maximum of 47.72% fatty acids of 16-octadecanoic acid methyl ester (10:12) and 19.58% pentadecanoic acid, 13-methyl-, and... [more]

This paper presents a Modified Perturb & Observe (P&O) Maximum power point tracking (MPPT) algorithm using fuzzy logic-based variable step size to overcome some of the limitations associated with the conventional P&O MPPT tracking method to improve the transient response and reduce the steady-state terminal voltage oscillations. The proposed MPPT algorithm was implemented and tested on an indoor emulated PV source that is constructed from a conventional solar panel and a DC power supply, a boost DC-DC converter and a dSPACE-based MPPT controller. The advantage of implementing this testing platform for MPPT is easy implementation and indoor testing of MPPT algorithms and DC-DC power converters. Thus, dependency on atmospheric conditions such as irradiance level can be avoided. Details of the emulated PV source mathematical model and electrical characteristics, the proposed MPPT algorithm via dSPACE, simulation and test results were presented in the paper.

This paper proposes a method to charge a lithium ion battery with an integrated compensator. Unlike the conventional charging method which uses separate voltage/current compensators based on a constant voltage-constant current charge profile, the proposed method uses a single compensator. The conventional method requires a complicated design process such as separate plant modeling for compensator design and the compensator tuning process in the frequency domain. Moreover, it has the disadvantage of a transient state between the mode change. However, the proposed method simplifies the complicated process and eliminates the transient response. The proposed compensator is applied to the LLC resonant converter and is designed to provide smooth and reliable performance during the entire charging process. In this paper, for the compensator design, the frequency domain models of the LLC resonant converter at the constant voltage and constant current charging mode are derived including the imp... [more]

In order to enhance the mass transfer efficiency between gas⁻liquid interfaces, NaClO₂ mist generated by an ultrasonic humidifier was used to remove NO from simulated flue gas. The effects of some key parameters (the gas flow rate, the NaClO₂ concentration in the solution, the inlet NO concentration, the NaClO₂ solution pH) on NO removal efficiency were investigated preliminarily. The results showed that NaClO₂ mist could oxidize NO with a much higher efficiency compared with other mists containing either NaClO or H₂O₂ as oxidants. With an increase in the gas flow rate from 1.5 to 3.0 L·min−1, the atomizing rate of the NaClO₂ solution increased almost linearly from 0.38 to 0.85 mL·min−1. When the gas flow rate was 2.0 L·min−1, a complete removal of NO had been reached. NO removal efficiency increased obviously with an increase in the NaClO₂ concentration in the solution. With an increase in the inlet NO concentration, the ratio of NO in the flue gas and NaClO₂ in the mist increased alm... [more]

One-quarter of the world’s population lives without access to electricity. Unfortunately, the generation technology most commonly employed to advance rural electrification, diesel generation, carries considerable commercial and ecological risks. One approach used to address both the cost and pollution of diesel generation is renewable energy (RE) integration. However, to successfully integrate RE, both the stochastic nature of the RE resource and the operating characteristics of diesel generation require careful consideration. Typically, diesel generation is configured to run heavily loaded, achieving peak efficiencies within 70⁻80% of rated capacity. Diesel generation is also commonly sized to peak demand. These characteristics serve to constrain the possible RE penetration. While energy storage can relieve the constraint, this adds cost and complexity to the system. This paper identifies an alternative approach, redefining the low load capability of diesel generation. Low load diesel... [more]

The tri-reforming process was employed for syngas production from biogas at elevated pressures in this study. In the tri-reforming process, air and water were added simultaneously as reactants in addition to the main biogas components. The effects of various operating parameters such as pressure, temperature and reactant composition on the reaction performance were studied numerically. From the simulated results, it was found that methane and carbon dioxide conversions can be enhanced and a higher hydrogen/carbon monoxide ratio can be obtained by increasing the amount of air. However, a decreased hydrogen yield could result due to the reverse water⁻gas shift reaction. A higher level of methane conversion and hydrogen/carbon monoxide ratio can be obtained with increased water addition. However, negative carbon dioxide conversion could result due to the water⁻gas shift and reverse carbon dioxide methanation reactions. The dry reforming reaction resulting in positive carbon dioxide conver... [more]

State of charge (SOC) and state of health (SOH) are two significant state parameters for the lithium ion batteries (LiBs). In obtaining these states, the capacity of the battery is an indispensable parameter that is hard to detect directly online. However, there is a strong correlation relationship between this parameter and battery internal resistance. This article first shows a simple and effective online internal resistance detection method. Secondly, the relationship between the measured internal resistance and the LiBs capacity is established by linear fitting. Finally, the capacity through internal resistance conversion is applied in SOC estimation. The estimation results show that this method can effectively enhance the SOC estimation accuracy regardless of temperature change and battery degradation.

Small-scale decentralized polygeneration systems have several energetic, economic and environmental benefits. However, using multiple energy sources and providing multiple energy services can lead to complicated studies which require advanced optimization techniques for determining optimal solutions. Furthermore, several parameters can influence the design and performance of a polygeneration system. In this study, the effects of heat load, renewable generation and storage units on the optimal design and performance of a polygeneration system for a hypothetical hospital located in northern Italy are investigated. The polygeneration system shows higher performance compared to the reference system, which is based on the separate generation of heat and power. It reduces fuel consumption by 14⁻32%, CO₂ emissions by 10⁻29% and annualized total cost by 7⁻19%, for various studied scenarios. The avoided fuel and electricity purchase of the polygeneration system has a positive impact on the econ... [more]

Integrated energy system (IES) has received increasing attention in micro grid due to the high energy efficiency and low emission of carbon dioxide. Based on the technology of combined heat and power (CHP), this paper develops a novel operation mechanism with community micro turbine and shared energy storage system (ESS) for energy management of prosumers. In the proposed framework, micro-grid operator (MGO) equipped with micro turbine and ESS provides energy selling business and ESS leasing business for prosumers. Prosumers can make energy trading with public grid and MGO, and ESS will be shared among prosumers when they pay for the rent to MGO. Based on such framework, we adopt a cooperative game for prosumers to determine optimal energy trading strategies from MGO and public grid for the next day. Concretely, a cooperative game model is formulated to search the optimal strategies aiming at minimizing the daily cost of coalition, and then a bilateral Shapley value (BSV) is proposed t... [more]

Energy extracted from the ocean can provide a source of regular and foreseeable electrical production at higher energy densities than any other renewable energy resource. The marine current resource is potentially great and is focused in several sites around the world. The knowledge of the energy potential, its constraints and availability are all prerequisites to determine the possibilities for the implementation of infrastructure to produce energy. They are also required to anticipate the structuring of energy routes and to respond to increasing technological needs. Several Moroccan regions want to take advantage by their coastal domain and play a role in the development of the tidal energy sector. They also want to benefit from the associated economic advantages knowing that the Mediterranean coast length is 550 km and the Atlantic length is 3000 km, respectively. The Copernicus Marine Service ocean products provide key input for such technologies, as they can be employed to help ev... [more]

This paper compares the annual performance of Integrated Solar Combined Cycles (ISCCs) using different solar concentration technologies: parabolic trough collectors (PTC), linear Fresnel reflectors (LFR) and central tower receiver (CT). Each solar technology (i.e. PTC, LFR and CT) is proposed to integrate solar energy into the combined cycle in two different ways. The first one is based on the use of solar energy to evaporate water of the steam cycle by means of direct steam generation (DSG), increasing the steam production of the high pressure level of the steam generator. The other one is based on the use of solar energy to preheat the pressurized air at the exit of the gas turbine compressor before it is introduced in the combustion chamber, reducing the fuel consumption. Results show that ISCC with DSG increases the yearly production while solar air heating reduces it due to the incremental pressure drop. However, air heating allows significantly higher solar-to-electricity efficie... [more]

During the “13th Five-Year Plan„ period, green energy is the top priority for China. China has realized that natural gas, as a low-carbon energy source, fits with the nation’s energy demand and will play a critical role in the energy transition, but the actual industry development is slower than expected. By analyzing the major gas corporations around the world, the paper finds that the key factors of the sector are supply and price of the energy resource. A comprehensive analysis on domestic and foreign imported gas reveals a trend of oversupply in China in the future. Given the critical import dependence, China has introduced a series of gas price reforms since 2013, which have led to negative impacts on important gas consumption sectors including power generation. With the levelized cost of electricity (LCOE) model, we find that under the prevailing gas supply structure and price level, the economy of utility gas power generation will remain unprofitable, while combined cooling heat... [more]

Pyrolysis and combustion behaviors of three coals (A, B, and C coals) were investigated and their combustion kinetics were calculated by the Freeman⁻Carroll method to obtain quantitative insight into their combustion behaviors. Moreover, the effects of coal size, air flow, oxygen content, and heating rate on coal combustion behaviors were analyzed. Results showed that the three coals have a similar trend of pyrolysis that occurs at about 670 K and this process continuously proceeds along with their combustion. Combustion characteristics and kinetic parameters can be applied to analyze coal combustion behaviors. Three coals having combustion characteristics of suitable ignition temperature (745⁻761 K), DTGmax (14.20⁻15.72%/min), and burnout time (7.45⁻8.10 min) were analyzed in a rotary kiln. Combustion kinetic parameters provide quantitative insights into coal combustion behavior. The suitable particle size for coal combustion in a kiln is that the content of less than 74 μm is 60% to... [more]

In this paper, a fast equalizer for series-connected battery packs with adaptive balancing current control is proposed. As the duty cycle of the power switch in conventional equalizers is kept constant during the equalization process, smaller voltage difference between cells will decrease balancing current and consequently result in extended balancing time, especially in the later phase of equalization. To deal with this problem and take the battery nonlinearity and circuit parameter non-ideality into consideration, an adaptive balancing current control based on a fuzzy logic inference is proposed. The presented approach can adjust the duty ratio adaptively, according to voltages of individual cells and pack, to keep the balancing current nearly constant: Therefore, the balancing time can be shortened and the balancing efficiency can be improved. Finally, experimental results of three compared methods will be given and discussed to validate the feasibility, effectiveness, and performan... [more]

A large amount of energy is consumed by heating and cooling systems to provide comfort conditions for commercial building occupants, which generally contribute to peak electricity demands. Thermal storage tanks in HVAC systems, which store heating/cooling energy in the off-peak period for use in the peak period, can be used to offset peak time energy demand. In this study, a theoretical investigation on stratified thermal storage systems is performed to determine the factors that significantly influence the thermal performance of these systems for both heating and cooling applications. Five fully-insulated storage tank geometries, using water as the storage medium, were simulated to determine the effects of water inlet velocity, tank aspect ratio and temperature difference between charging (inlet) and the tank water on mixing and thermocline formation. Results indicate that thermal stratification enhances with increased temperature difference, lower inlet velocities and higher aspect r... [more]

Coalbed methane (CBM) well drilling and logging data together with geological data were adopted to provide insights into controlling mechanism of gas content in major coal seams and establish gas accumulation models in the Gujiao area, Northwest Qinshui Basin, China. Gas content of targeted coals is various in the Gujiao area with their burial depth ranging from 295 to 859 m. Highly variable gas content of coals should be derived from the differences among tectonism, magmatism, hydrodynamism, and sedimentation. Gas content preserved in the Gujiao area is divided into two parts by the geological structure. Gas tends to accumulate in the groundwater stagnant zone with a total dissolved solids (TDS) value of 1300⁻1700 ppm due to water pressure in the Gujiao area. Reservoir properties including moisture content, minerals, and pore structure also significantly result in gas content variability. Subsequently, the gray correlation statistic method was adopted to determine the most important f... [more]

The Longwall Top Coal Caving (LTCC) method has greatly improved the production of ultra-thick underground coal resources. However, face fall and support closure have been becoming highly frequent accidents at the working face, and seriously threaten the safety of miners. The key to avoiding these problems is to reveal the structural evolution of the roof strata and then choose a reasonable working resistance for the hydraulic supports. According to physical modeling, theoretical analysis and field observation of the LTCC panel, four kinds of structural models can be found and defined, in consideration of the coincident movement of key strata (KS) and the mining activities of upper face in overburden strata. The KS are performed as cantilever structures, hinged structures and voussoir beam structures at three different positions in roof strata. The structural characteristics of the KS and its movement laws are shown in the four structural modes. The loads acting on the support in the fo... [more]

Battery electric vehicles (BEVs) reduce energy consumption and air pollution as compared with conventional vehicles. However, the limited driving range and potential long charging time of BEVs create new problems. Accurate charging time prediction of BEVs helps drivers determine travel plans and alleviate their range anxiety during trips. This study proposed a combined model for charging time prediction based on regression and time-series methods according to the actual data from BEVs operating in Beijing, China. After data analysis, a regression model was established by considering the charged amount for charging time prediction. Furthermore, a time-series method was adopted to calibrate the regression model, which significantly improved the fitting accuracy of the model. The parameters of the model were determined by using the actual data. Verification results confirmed the accuracy of the model and showed that the model errors were small. The proposed model can accurately depict the... [more]

This study has focused on the PM emissions of diesel engines. Diesel engines are attractive power units that are used widely in many fields and have become one of the larger contributors of total petroleum consumption. However, diesel engines are among the main contributors of emissions into the air, especially particulate matter (PM) and nitrogen oxides (NOx). PM is one of the major pollutants emitted by diesel engines and has adverse effects on human health. Accordingly, many studies have been conducted to find alternative fuels that are clean and efficient. Biodiesel, which produces less PM than diesel fuel, is preferred as an alternative source for diesel engines. Therefore, using palm oil methyl ester (POME) for diesel engines would be a more economical and sustainable solution. This study has focused on the PM emissions of diesel engines fuelled by a diesel and POME blend (B5, B10, B20, and B100). A comparison between diesel and the POME blend has been made which involves PM mass... [more]

The battery management system (BMS) is the key development for energy storage systems, and battery balancing is an important subsystem of the BMS. However, with rapid development of supercapacitors, future energy storage cells are not constrained by one type, while different types of cells may form a source package (SP). Furthermore, the introduction of second-life batteries from retired electric vehicles promotes the demand of effective balancing systems for SPs with hybrid cells, as well as the requirement that balancing should be extended to any preset ratio rather than 1:1. This paper proposes a novel tapped inductor balancing circuit that allows any ratio of voltage balancing for hybrid energy storage cells. The analysis of the circuit, simulation and experiment results are presented to demonstrate its effectiveness in handling hybrid source balancing.

(1) Background: Lipids derived from oleaginous microbes have become promising alternative feedstocks for biodiesel. This is mainly because the lipid production rate from microbes is one to two orders of magnitude higher than those of energy crops. However, the conventional process for converting these lipids to biodiesel still requires a large amount of energy and organic solvents; (2) Methods: In this study, an oleaginous yeast, Rhodotorula glutinis, was used for direct transesterification without lipid pre-extraction to produce biodiesel, using sulfuric acid or sodium hydroxide as a catalyst. Such processes decreased the amount of energy and organic solvents required simultaneously; (3) Results: When 1 g of dry R. glutinis biomass was subject to direct transesterification in 20 mL of methanol catalyzed by 0.6 M H₂SO₄ at 70 °C for 20 h, the fatty acid methyl ester (FAME) yield reached 111%. Using the same amount of biomass and methanol loading but catalyzed by 1 g/L NaOH at 70 °C for... [more]

In this study, a double concentric burner burning methane with an annular coaxially-flowing oxidizer was adopted to operate the diffusion flame in lifted flame regime. The effects of coaxial-flow velocity, coaxial-flow composition variation through total and partial replacement of N₂, and coaxial-flow oxygen enrichment were experimentally investigated in terms of the resultant changes in the flame stability, and thermal and emission characteristics. Consistent with the triple flame theory, the current stability tests show a linear increase in flame lift height with increasing coaxial-flow velocity and the blowout of lifted flames occurred at constant flame tip height. Replacement of N₂ by CO₂ in the coaxial-flow deteriorated the flame stability by significantly reducing the threshold coaxial-flow velocity. Due to combustion enhancement that is caused by oxygen enrichment, the threshold coaxial-flow velocity increased and this increase is more significant for the N₂-diluted flame than C... [more]

The use of lithium batteries for power and energy-hungry applications has risen drastically in recent years. For such applications, it is necessary to connect the batteries in large assemblies of cells in series and parallel. With a large number of cells operating together, it is necessary to understand their intrinsic variabilities, not only at the initial stage but also upon aging. In this study, we studied a batch of commercial cells to address their initial cell-to-cell variations and also the variations induced by cycling. To do so, we not only tracked several metrics associated with cell performance, the maximum capacity, the resistance, and the rate capability but also the degradation mechanism via a non-invasive quantification of the loss of lithium inventory (LLI), the loss of active material (LAM) and the kinetic degradation on both electrodes. We found that, even with small initial cell-to-cell variations, significant variations will be observed upon aging because the cells... [more]