To meet future goals of energy sustainability and carbon neutrality, disruptive changes to the current energy mix will be required, and it is expected that renewable fuels, such as hydrotreated vegetable oil (HVO), will play a significant role. To determine how these fuels can transition from pilot scale to the commercial marketplace, extensive research remains needed within the transportation sector. It is well-known that cold engine thermal states, which represent an inevitable portion of a vehicle journey, have significant drawbacks, such as increased incomplete combustion emissions and higher fuel consumption. In view of a more widespread HVO utilization, it is crucial to evaluate its performance under these conditions. In the literature, detailed studies upon these topics are rarely found, especially when HVO is dealt with. Consequently, the aim of this study is to investigate performance and exhaust pollutant emissions of a compression ignition engine running on either regular (p... [more]

Using high charge dilution low temperature combustion (LTC) strategies in a diesel engine offers low emissions of nitrogen oxides (NOx). These strategies are limited to part-load conditions and involve high levels of charge dilution, typically achieved through the use of recirculated exhaust gases (EGR). The slow response of the gas handling system, compared to load demand and fuelling, can lead to conditions where dilution levels are higher or lower than expected, impacting emissions and combustion stability. This article reports on the sensitivity of high-dilution LTC to variations in EGR rate and fuel injection timing. Impacts on engine efficiency, combustion stability and emissions are assessed in a single-cylinder engine and compared to in-cylinder flame temperatures measured using a borescope-based two-colour pyrometer. The work focuses on low-load conditions (300 kPa gross indicated mean effective pressure) and includes an EGR sweep from conventional diesel mode to high-dilution... [more]

Nuclear magnetic resonance (NMR) is widely used to characterize the pore structure of rock. The nanoscale pores and fractures are well developed in a shale gas reservoir. The closure of nanopores caused by the increase in effective stress during the gas production process could induce stress sensitivity in shale nanopores, which has a great impact on the single-well productivity in the middle−late development stage. In this paper, shale samples from the Longmaxi Formation were taken to investigate the nanopore stress sensitivity via an NMR method. Samples with different degrees of pore and fracture development were selected and NMR experiments under different effective stress conditions were carried out. The results show that: (1) As the effective stress increases, the pore space in shale is continuously compressed, and the cumulative pore volume of shale decreases; (2) There is a more pronounced decrease in the cumulative pore volume of samples containing larger pores with the increas... [more]

It is difficult to measure the concentrated solar radiation flux (CSRF) inside a cavity receiver directly due to the complex geometry of cavity receivers. At present, most reports measure the CSRF at the aperture plane (generally coinciding with the focal plane of solar concentrators) of the cavity receiver instead of at the absorber wall, which would result in serious aberration because of the obvious difference in configuration between the aperture plane and the absorber wall. To obtain the CSRF at the absorber wall with complex geometry, the vector characteristics (consisting of both directional distributions and spatial distributions) of the CSRF at the focal plane were measured using developed double water-cooled Lambertian targets together with a CCD (charge-coupled device) camera. Then the CSRF images at the absorber wall of a hemisphere cavity receiver were carried out by applying MCRTM (Monte Carlo ray-tracing method) in combination with the measured vector results of the CSRF... [more]

In the case of cogeneration, the allocation of operation costs has a particularity specific to the joint production of heat and electricity from the same primary energy source. The cost allocation is also influenced by the demand conditions faced by the joint products, and prices must be sufficient for both products to remain profitable and competitive with other power generation alternatives in the respective markets. Therefore, the choice of cost allocation methodology is influenced by market conditions. The paper presents an algorithm for determining the prices of energy and heat produced in cogeneration according to demand and market conditions. The economic market method was extended with an algorithm based on duality theory for verifying allocation methods and establishing forecasting strategies. An example is provided for a cogeneration plant (1.287 MWe; 5.386 MWth) based on ORC (Organic Rankine Cycle) technology and biomass fuel. The fuel cost has a major influence on the total... [more]

Electric Vehicles are becoming increasingly popular due to their environment friendly operation. As the demand for electric vehicles increases, it has become quite important to explore their charging strategies. Since charging and traction do not normally occur simultaneously and the power electronics converters for both operations have some similarities, the practice of integrating both charging and traction systems is becoming popular. These types of chargers are termed ‘Integrated Chargers’. The aim of this paper is to review the available literature on the integrated chargers and present a critical analysis of the pros and cons of different integrated charging architectures. Integrated chargers for electric vehicles with three-phase permanent magnet synchronous machines, multi-phase machines and switched reluctance machines were compared. The challenges with the published integrated chargers and the future aspect of the work were been discussed.

The present work numerically investigates the effect of a cavity implemented in a premixed methane/air micro-combustor on enhancing its thermal performances and thermodynamic efficiencies for micro-thermophotovoltaic applications. The 3D time-domain numerical model is first validated by comparing its predictions with the experimental data available in the literature. Then it is applied to examine the effects of the cavity dimensionless axial location (xc/L), cavity volume (Vc), the equivalence ratio ϕ and hydrogen blended ratio (α) on the temperature uniformity and enhancement of the combustor outer wall and exergy efficiency. It is found that implementing a cavity in the combustion chamber increases the outer wall mean temperature (OWMT) and the exergy efficiency up to approximately 65 K and 10%, respectively. The optimal cavity dimensionless axial location (xc/L) is set to 1/9, and the height (Hc_dims) is 1/5, respectively. However, the cavity length Lc and angle θc are found to play... [more]

Because of the limitations of traditional refrigerants, the application of trans-critical CO2 technology in domestic gas conditioners and other fields is becoming increasingly popular. This paper proposes a new CO2 trans-critical refrigeration system. Combining the internal heat exchanger and expander components, as well as the two-stage compression cycle, we analyzed the effectiveness of the expander, internal heat exchanger, and intercooling on system performance under various operating conditions in terms of energy, exergy analysis, and optimal discharge pressure. The system performance can be changed by changing the cycle conditions and internal heat exchanger effectiveness, which reduces system power consumption and the percentage of exergy losses of gas cooler components. Compared to the single-stage compression with expander cycle, the systems cycle power consumption is reduced by 2−15.7% and the maximum system COP is increased by 2.93−6.93%. From the view of energy effectivenes... [more]

The more complex the hydrogeological conditions of a mine, the more likely the coal seam is to experience water inrush during the mining process, and the greater the degree of the water inrush hazard. The scientific and reasonable prediction of water inrush in mines with complex hydrogeological conditions is of great significance to the safe and efficient operation of coal mines. Taking the roof water inrush problem of the No. 3 lower coal seam in the Jisan Coal Mine as the research object, the factors affecting the roof water inrush of the coal seam were comprehensively considered from three aspects: the aquifer property, the mining fracture development and the geological structure. The evaluation index system was constructed by selecting 10 factors, including the aquifer depth and thickness, core recovery rate, brittle−plastic rock thickness ratio, number of water-resisting layers, development height of the water-conducting fracture zone, fault density, frequency density, scale index... [more]

In pursuit of identifying the most accurate and efficient uncertainty modelling (UM) techniques, this paper provides an extensive review and classification of the available UM techniques for probabilistic power system stability analysis. The increased penetration of system uncertainties related to renewable energy sources, new types of loads and their fluctuations, and deregulation of the electricity markets necessitates probabilistic power system analysis. The abovementioned factors significantly affect the power system stability, which requires computationally intensive simulation, including frequency, voltage, transient, and small disturbance stability. Altogether 40 UM techniques are collated with their characteristics, advantages, disadvantages, and application areas, particularly highlighting their accuracy and efficiency (as both are crucial for power system stability applications). This review recommends the most accurate and efficient UM techniques that could be used for proba... [more]

This paper surveys theory and practice on how a larger and integrated energy market can propel electricity trading through economies of scale. We make a systematic presentation of theories and methods used by various scholars to generate knowledge on integrated electricity markets. We discuss paradigms, concepts, and practices emanating from the complex topic of a unified electricity market with an intent to identify gaps. We conclude that electricity trading in EMI has a propensity to drive both economic integration and sustainable energy access; that crafting ways and means for integrating cross-border systems without sacrificing the local economy could make the idea of EMI more palatable to partner countries; and that adoption of ex ante studies that are non-data oriented could improve the design of upcoming regional electricity markets.

The injection of carbon dioxide (CO2) into gas reservoirs has become an important way to enhance gas recovery and reduce CO2 emissions. Large discrepancies are observed when predicting natural gas compressibility factors with high CO2 content by several well-known empirical correlations. An explicit correlation is proposed to improve the prediction accuracy in the estimation of compressibility factors on condensate gases with variable CO2 contents. The analysis of the results is carried out on the basis of 202 experimental data from 9 various mixtures of natural gases. The results show that relative deviations of compressibility factors predicted by conventional empirical correlations increase with the increase in CO2 mole fraction with an average error of 8%. The average error of the new method is less than 4%. The effect of compressibility factors on the estimations of dynamic reserves is studied and the compressibility factor causes a 3% reduction in dynamic reserves estimation. The... [more]

Currently, wind energy, a reliable, affordable, and clean energy source, contributes to 16% of Europe’s electricity. A typical modern wind turbine design lifespan is 20 years. In European Union countries, the number of wind turbines reaching 20 years or older will become significant beyond 2025. This research study presents a methodology aiming to upgrade rotor blades for existing wind turbines to extend the turbine life. This methodology employs blade element momentum theory, finite element analysis, genetic algorithm, and direct screen methods to optimise the blade external geometry and structural design, with the main objective to increase the blade power capture efficiency and enhance its structural performance. Meanwhile, the compatibility between the blade and the existing rotor of the wind turbine is considered during the optimisation. By applying this methodology to a 225 kW wind turbine, an optimal blade, which is compatible with the turbine hub, is proposed with the assistanc... [more]

An optimal energy mix of various renewable energy sources and storage devices is critical for a profitable and reliable hybrid microgrid system. This work proposes a hybrid optimization method to assess the optimal energy mix of wind, photovoltaic, and battery for a hybrid system development. This study considers the hybridization of a Non-dominant Sorting Genetic Algorithm II (NSGA II) and the Grey Wolf Optimizer (GWO). The objective function was formulated to simultaneously minimize the total energy cost and loss of power supply probability. A comparative study among the proposed hybrid optimization method, Non-dominant Sorting Genetic Algorithm II, and multi-objective Particle Swarm Optimization (PSO) was performed to examine the efficiency of the proposed optimization method. The analysis shows that the applied hybrid optimization method performs better than other multi-objective optimization algorithms alone in terms of convergence speed, reaching global minima, lower mean (for mi... [more]

Water and energy are becoming more and more important in agriculture, urban areas and for the growing population worldwide, particularly in developing countries. To provide access to water it is necessary to use appropriate pumping systems and supply them with enough energy for operation. Pumps powered by solar photovoltaic energy are complex electromechanical systems that include hydraulic equipment, electrical machines, sensors, power converters, and control units. Therefore, solar photovoltaic pumping systems are associated with various fields of science and engineering. In remote, less-populated areas without electricity, where it is either challenging to connect to the grid or it is not possible, solar photovoltaic water pumping systems can play a significant role. To see whether solar photovoltaic pumping systems may be a practical, viable, and affordable method of pumping water it is necessary to study different aspects of their operation. The goal of this current article is to... [more]

Given the increase in population and energy demand worldwide, alternative methods have been adopted for the production of hydrogen as a clean energy source. This energy offers an alternative energy source due to its high energy content, and without emissions to the environment. In this bibliometric analysis of energy production using electrolysis and taking into account the different forms of energy production. In this analysis, it was possible to evaluate the research trends based on the literature in the Scopus database during the years 2011−2021. The results showed a growing interest in hydrogen production from electrolysis and other mechanisms, with China being the country with the highest number of publications and the United States TOP in citations. The trend shows that during the first four years of this study (2011−2014), the average number of publications was 74 articles per year, from 2015 to 2021 where the growth is an average of 209 articles, the journal that published the... [more]

In this paper, the effect of rotating magnetic fields on hydrogen generation from water electrolysis is analyzed, aiming to provide a research reference for hydrogen production and improving hydrogen production efficiency. The electrolytic environment is formed by alkaline solutions and special electrolytic cells. The two electrolytic cells are connected to each other in the form of several pipes. The ring magnets are used to surround the pipes and rotate the magnets so that the pipes move relative to the magnets within the ring magnetic field area. Experimentally, the electrolysis reaction of an alkaline solution was studied by using a rotating magnetic field, and the effect of magnetic field rotation speed on the electrolysis reaction was analyzed using detected voltage data. The experimental phenomenon showed that the faster the rotation speed of the rotating magnetic field, the faster the production speed of hydrogen gas.

Demand management is expected to reduce emissions from energy systems and support the utilization of renewable energy sources. In this paper, the focus is on the viability of educational buildings’ mechanical ventilation systems’ participation in electric demand management. The results suggest that when load shedding lasts for a short duration, the ventilation machine load seems more promising than expected for electric demand management, as even 60% of its electric power could be granted to such markets. Prolonging the load-shedding duration increases the risk of the indoor carbon dioxide (CO2) concentration exceeding the limit for good indoor air quality. This paper contributes to the academic community by providing information for the assessment of the demand management potential of buildings and eventually their significance in decarbonizing the electric energy system and filling research gaps concerning the impact of implementing demand management that involves a reduction in vent... [more]

The reserves of heavy oil are enormous. However, its high viscosity and other characteristics make heavy oil extraction and transportation extremely difficult. Power ultrasonic (US) reforming technology on heavy oil has the advantages of environmental protection and fast results, so it is important to understand the mechanism of ultrasonic reforming. We examine the influence law of the electric power input of the US transducer on the viscosity of heavy oil. Fourier Transform Infrared Spectrometer (FTIR) and Gas Chromatography (GC) are applied to explain the changes in different functional groups, heavy components, and carbon chains before and after US irradiation. The cavitation noise method is also used to study the influences of variance in the intensity of cavitation on the viscosity of heavy oil. The results indicate that the viscosity of heavy oil first decreases, and next increases with an increase in electric power. The functional groups and chromatographic distillation also cha... [more]

Modern internal combustion engines are designed to meet new emission standards and reduce fuel consumption. The wide application of direct fuel injection is associated with the problem of injector contamination. It leads to a deterioration of the engine’s environmental performance. The paper aims to evaluate the effect of applying gasoline−butanol blends and appropriate additives on the formation of injector deposits. The research involved testing the engine on a dynamometer, evaluating the injector tips visually at 1000× magnification, and registering the fuel spray using high-speed imaging techniques with a laser and halogen lighting source. The effect of engine operating with the reference fuel was to coke the injector tip with a linear pattern. It increased the linear injection time to keep the engine’s operating point constant over the 48 h test. The application of 20% (v/v) butanol reduced deposit formation. The best scavenging results were obtained by extending the engine operat... [more]

As one of the most promising working substances for space nuclear power sources, research on the heat transfer characteristics of helium−xenon gas mixtures has become the key issue in focus. In this paper, through an extensive literature research, the current research results are classified and organized. The results show that there are semi-empirical formulas for physical property parameters with high prediction accuracy, and there are also Nusselt correlations with small errors. However, both lack the support of experimental data. There is no systematic research on enhanced heat transfer technologies, and the conclusions of the existing studies are not significant, so they can only make limited reference contributions to the future study of enhanced heat transfer technologies. More flow and heat transfer experiments on helium−xenon mixtures are urgently needed, through detailed analysis of the heat transfer performance of helium−xenon flow, identifying the key factors affecting the h... [more]

Nowadays, modern gas supply systems are complex. They consist of gas distribution stations; high-, medium-, and low-pressure gas networks; gas installations; and control points. These systems are designed to provide natural gas to the population, including domestic, industrial, and agricultural consumers. This study is aimed at developing methods for improving the calculation of gas distribution networks. The gas supply system should ensure an uninterrupted and safe gas supply to consumers that is easy to operate and provides the possibility of shutting down its individual elements for preventive, repair, and emergency recovery work. Therefore, this study presents a mathematical calculation method to find the optimal operating conditions for any gas network during the period of seasonal changes in thermal loads. This method demonstrates how the reliability of gas distribution systems and resistance to non-standard critical loads are affected by consumers based on the time of year, mont... [more]

Theoretical influence of the buoyancy and thermal radiation effects on the MHD (magnetohydrodynamics) flow across a stretchable porous sheet were analyzed in the present study. The Darcy−Forchheimer model and laminar flow were considered for the flow problem that was investigated. The flow was taken to incorporate a temperature-dependent heat source or sink. The study also incorporated the influences of Brownian motion and thermophoresis. The general form of the buoyancy term in the momentum equation for a free convection boundary layer is derived in this study. A favorable comparison with earlier published studies was achieved. Graphs were used to investigate and explain how different physical parameters affect the velocity, the temperature, and the concentration field. Additionally, tables are included in order to discuss the outcomes of the Sherwood number, the Nusselt number, and skin friction. The fundamental governing partial differential equations (PDEs), which are used in the m... [more]

This review presents the latest research works detailing granulation processes and granulates, including and based on waste (bio and industrial) as a biofuel/energy source and the possible usage of granulates from and/or based on biochar. The innovative aspect is that the article focuses on the broadest possible environmental aspect understood in minimizing the burden related to the amount and composition of waste generated by various industries. The aim of the study is to demonstrate the processes as an effective method of waste management and also as energy sources. Based on various sources, a brief summary of why granulation is an important area of both scientific research and industrial applications is provided. The review also presents a summary of basic concepts and definitions in the topic of granulation—types of processes, apparatuses used, and examples of research results in the literature. The main part of the review is the analysis of the literature providing numerous exampl... [more]

In this paper, a high step-up three-level DC−DC converter with a symmetric structure for PV application is proposed. The converter has high voltage gain. This is achieved due to the use of two high step-up cells and two resonant paths in its structure. The converter has low input current ripples and the voltage stress across all switches is equal to half of the output voltage. The proposed converter uses simple pulse−width modulation (PWM) to trigger the switches. Hence, the proposed converter benefits from a simple structure and control circuit. All semiconductor devices are turned on/off under ZCS conditions. Thus, the switching losses are decreased, and the total efficiency is increased. The converter is implemented and tested through a laboratory prototype. The experimental results verify the theoretical analysis.