The placement of the photovoltaic generation system (PVGS) and operation of the on-load tap changer (OLTC) should have great impacts on the system loss and voltage quality, which are the main concerns of the distribution operator. Considering these multiple evaluation indices and other constraints, this paper proposed a substation-based optimal PVGS placement and OLTC operation model. The objective function that was used to evaluate the optimal PVGS placement and OLTC operation consists of a minimization of system loss and voltage quality. The model’s constraints contain the voltage and line flow limits, voltage deviations, voltage unbalance, etc. Uncertainties of the load and irradiance are also included in the model. A nondominated sorting genetic algorithm II (NSGA II) is used to solve this multi-objective optimization problem. Comparisons of the substation-based and feeder-based planning are also studied in this paper. The test results demonstrate the substation-based planning coul... [more]

The main goal of hydraulic fracturing stimulation in unconventional and tight reservoirs is to maximize hydrocarbon production by creating an efficient stimulated reservoir volume (SRV) around the horizontal wells. To zreach this goal, a physics-based model is typically used to design and optimize the hydraulic fracturing process before executing the job. However, two critical issues make this approach insufficient for achieving the mentioned goal. First, the physics-based models are based on several simplified assumptions and do not correctly represent the physics of unconventional reservoirs; hence, they often fail to match the observed SRVs in the field. Second, the success of the executed stimulation job is evaluated after it is completed in the field, leaving no room to modify some parameters such as proppant concentration in the middle of the job. To this end, this paper proposes data-driven and global sensitivity approaches to address these two issues. It introduces a novel work... [more]

Photovoltaics (PV) and Solar Thermal (ST) collectors are sometimes competitors, as investment capacity, energy demand, and roof space are limited. Therefore, a ratio that quantifies the difference in annual energy output between ST and PV for different locations is useful. A market survey assessing the average price and performance both in 2013 and 2021 was conducted, showing a factor of 3 cell price decrease combined with a 20% efficiency increase, while ST showed negligible variation. Winsun simulations were conducted, and the results were plotted on the world map. Despite variations due to local climate, the ratio of energy production (ST/PV) increases at lower latitudes mainly due to (a) higher air temperature increasing ST output but decreasing the PV output; (b) solar radiation reducing ST efficiency to zero while having a minor impact on PV efficiency. The ratio was calculated for several ST operating temperatures. For latitudes lower than 66°, the ratio of a flat plate at 50 °C... [more]

Utilities are increasingly interested in integrating energy efficiency and demand response measures as a strategic approach that aims to achieve an increasingly reliable, dynamic, and integrated electric system. The concepts of energy efficiency (EE), demand response (DR), and system reliability (ESR) have been mainly studied from a different perspective, dealing only with the interaction between EE and DR and between EE and ESR. This paper aims to improve knowledge and demonstrate the validity of EE interventions (EEIs) through the use of a tool for evaluating the benefits of energy efficiency measures (EEMs) in the environmental sphere and in terms of DR and ESR. In order to evaluate this interaction, a quantitative method is proposed and validated on real results in an Italian case scenario, taking into account the analysis of smart meters data for residential users located in southern Italy in Calabria. Based on the collected data, an aggregation of users was evaluated with real ho... [more]

The synchronous integration of numerous input and output loads is possible with multi-input (MI) and multi-output (MO) DC−DC converters. In this paper, the non-isolated DC−DC converter described, which has a high step-up capability and multiple ports for outputs and inputs for energy storage system (ESS) applications. The voltage level of the converter is changeable. The capacity to provide the large voltage increases with a low duty cycle portion, the ease with which each duty cycle can be controlled, and minimal power losses are all advantages of the proposed design. The proposed system offers advantages for applications requiring energy storage. In the continuous conduction mode (CCM), the operation principles, steady-state evaluation, and extracting of the voltage and current coefficients are performed. The supply sources can be inserted or withdrawn without causing a cross-regulation issue in the proposed converter. Ultimately, the functionality of the proposed structure is examin... [more]

The subject of this study was a distribution substation that feeds 14 fast DC chargers (80 kW) located at the bus depot in Lublin, Poland. The voltage variations were determined to be within the PN-EN 50160 standard limit values (±10% Un). There were several events registered when 4th, 6th, 8th, and 10th voltage harmonics were above the PN-EN 50160 limit during the charging of the electric buses. The obtained maximum 10 min average values of the total voltage harmonic distortion (THD) were 3.36%, 2.27%, and 2.89% for the first, second, and third phase, respectively, i.e., below the limit value of 8% required by PN-EN 50160. Due to the exceedance of the 6th voltage harmonic, the PN-EN 50160 requirements were not met.

In order to achieve climate goals and limit the global temperature rise, an increasing share of renewable-energy sources (RESs) is required. However, technologies for the use of RESs need to be integrated into the landscape and ecological heritage to ensure a fully sustainable energy transition. This work aims to develop a scalable technique for integrating the estimation of rooftop PV and wind potential into spatial planning, providing a framework to support decision-makers in developing energy policies. The methodology is applied to the minor Sicilian islands, which are characterised by significant environmental and landscape constraints. The methodology is used to identify the areas eligible for the installation of onshore wind turbines and the usable roof surfaces for the installation of PV systems. It is shown that the available technical potential of rooftop PV installations could ensure a higher production than the actual consumption on 13 of the 14 islands studied. Nevertheless... [more]

Micro-cogeneration (micro-combined heat and power) is a technology that simultaneously produces decentralized thermal and electrical energy with a power of less than 50 kWel. This technology consists of using the waste heat generated by a thermodynamic process to meet the heating and hot water demands of buildings. The use of biomass as a fuel offers important advantages: use of a renewable energy, carbon neutrality, availability, and low cost. Furthermore, the analysis and optimization of hybrid energy systems, which include existing micro-cogeneration systems powered by renewable energy, is a scientific challenge needing experimental characterization of such micro-cogeneration systems. In this context, a biomass Stirling micro-CHP unit (μCHP), was tested to characterize its energy performance. A dynamic model based on these experimental investigations was developed to evaluate its thermal power output and energy efficiencies. The dependence of the nominal load on the water flow rate... [more]

The development of district heating systems results in a search for alternative heat sources. One of these is low-enthalpy geothermic energy, more available than traditional geothermal energy. However, utilization of these resources is difficult, due to the low quality of the produced heat. To utilize them, the heat pump system can be used. Such a system was designed for this case study of a city in a region of the Polish Lowlands. The data necessary for the design came from the project of the borehole and operational parameters of the existing heating plant. Four heat pump-cycle designs were proposed, modeled, and simulated using Ebsilon software. Afterward, the designs were optimized to achieve maximum coefficient of performance (COP) value. As a result of the simulation, the efficiency of each design was determined and the seasonal COP value was calculated with the annual measured heat demand of the plant. The system based on the cascade design proved the most efficient, with a seas... [more]

Potential analyses identify possible locations for renewable energy installations, such as wind turbines and photovoltaic arrays. The results of previous potential studies for Germany, however, are not consistent due to different assumptions, methods, and datasets being used. For example, different land-use datasets are applied in the literature to identify suitable areas for technologies requiring open land. For the first time, commonly used datasets are compared regarding the area and position of identified features to analyze their impact on potential analyses. It is shown that the use of Corine Land Cover is not recommended as it leads to potential area overestimation in a typical wind potential analyses by a factor of 4.7 and 5.2 in comparison to Basis-DLM and Open Street Map, respectively. Furthermore, we develop scenarios for onshore wind, offshore wind, and open-field photovoltaic potential estimations based on land-eligibility analyses using the land-use datasets that were pro... [more]

Close-distance coal seams are widely distributed in China, and the mining of overlying coal seams leads to floor damage. To grasp the properties and the fracture spans of the damaged main roof in the underlying coal seam, combining the calculation of the floor damage depth with rock damage theory and the formulas for calculating the first and periodic weighting intervals of the damaged main roof and the instability conditions of the damaged key blocks are obtained. Three interaction stability mechanics models are proposed for key blocks with different properties of the upper and lower main roof, and the instability conditions of the lower damaged key blocks are obtained when the fracture lines overlap. When combined with a specific example, the field monitoring verified the calculation results. The research results are as follows: (1) The first and periodic weighting intervals, horizontal thrust between blocks, and critical load of instability of the damaged main roof are significantly... [more]

Rising climate change issues are prompting engineers and scientists to focus more on improving renewable energy conversion systems [...]

With the rapid development of lithium-ion battery technology, powertrain electrification has been widely applied in vehicles. However, if thermal runaway occurs in a lithium-ion battery pack, the venting gas in the cells will spread and burn rapidly, which poses a great threat to safety. In this study, a 2D CFD simulation of the combustion characteristics of cell venting gas in a lithium-ion battery pack is performed, and the possibility of detonation of the battery pack is explored. First, a numerical model for the premixed combustion of venting gas is established using a two-step combustion mechanism. The combustion characteristics are then simulated in a 2D channel for the stoichiometric combustible mixture, and the variations in the flame velocity and pressure increment in the flow channel are analyzed. Next, the effects of the initial conditions inside the battery pack, including the pressure, temperature, and excess air coefficient, on the flame propagation process and pressure v... [more]

China faces a difficult choice of maintaining socioeconomic development and carbon emissions mitigation. Analyzing the decoupling relationship between economic development and carbon emissions and its driving factors from a regional perspective is the key for the Chinese government to achieve the 2030 emission reduction target. This study adopted the logarithmic mean Divisia index (LMDI) method and Tapio index, decomposed the driving forces of the decoupling, and measured the sector’s decoupling states from carbon emissions in Xinjiang province, China. The results found that: (1) Xinjiang’s carbon emissions increased from 93.34 Mt in 2000 to 468.12 Mt in 2017. Energy-intensive industries were the key body of carbon emissions in Xinjiang. (2) The economic activity effect played the decisive factor to carbon emissions increase, which account for 93.58%, 81.51%, and 58.62% in Xinjiang during 2000−2005, 2005−2010, and 2010−2017, respectively. The energy intensity effect proved the dominant... [more]

Bio-hydrogen from residual biomass may involve energy-intensive pre-treatments for drying and size management, as in the case of wet agro-industrial residues. This work assesses the performance of an alternative process layout for bio-hydrogen production from citrus peel gasification, with the aim of cogenerating heat and power along with hydrogen, using minimal external energy sources. The process consists of an air-steam fluidized bed reactor, a hydrogen separation unit, a hydrogen compression unit, and a combined heat and power unit fed by the off-gas of the separation unit. Process simulations were carried out to perform sensitivity analyses to understand the variation in bio-hydrogen production’s thermodynamic and environmental performance when the steam to biomass ratios (S/B) vary from 0 to 1.25 at 850 °C. In addition, energy and exergy efficiencies and the integrated renewability (IR) of bio-hydrogen production are evaluated. As main results, the analysis showed that the highes... [more]

Solar energy forecasting is considered an essential scientific aspect in supporting efforts to integrate solar energy into power grids. Moreover, solar energy forecasting plays an essential role in mitigating greenhouse gas emissions and conserving energy for future use. This study conducted a bibliometric analysis to assess solar energy forecasting research studies evolution at the continental (Africa) and southern Africa levels. Key aspects of analysis included (i) scientific research trends, (ii) nature of collaboration networks, (iii) co-occurrence of keywords and (iv) emerging themes in solar energy forecasting over the last two decades, between the years 2000−2021. The results indicate that solar energy forecasting research has, on average, expanded by 6.4% and 3.3% in Africa and southern Africa, respectively. Based on the study context, solar energy forecasting research only gained momentum in 2015, peaking in 2019, but it is generally still subtle. The scientific mapping illust... [more]

In recent years, large-capacity, high-head pump−turbine units have been developed for pumped storage power plants to effectively utilise water energy and store large amounts of electricity. Compared with the traditional Francis turbine unit, the radial distance between the trailing edge of the guide vanes and the leading edge of runner blades of high-head pump−turbine unit is smaller, so the rotor−stator interaction and the corresponding pressure fluctuations in the vaneless space of pumped storage units are more intense. The pressure fluctuations with high amplitudes and high frequencies induced by rotor−stator interaction (RSI) become the main hydraulic excitation source for the structures of the unit and may cause violent vibration and fatigue damage to structural components, and seriously affect the safe operation of the units. In this paper, the RSI of a high-head pump−turbine in turbine mode of operation is studied in detail by means of site measurement and full three-dimensional... [more]

Nowadays, air conditioning consumes, on average, around one-fifth of the total power used in buildings globally. The present paper aims to provide the present status on the employment of Earth-to-Air Heat eXchangers (EAHX) to contain the consumption of energy and to reduce the effect on the environment in response to the Montreal and Kyoto protocols in a way to achieve cleaner energy production with a low Global Warming Potential (GWP) and a low ozone depletion potential (ODP). Different peculiarities and applications (direct or hybrid) are critically analyzed and reviewed. Specifically, in this paper, the different hybrid applications presented in the literature, where the Earth-to-Air Heat eXchangers are coupled to advanced systems, are reviewed. Finally, an IoT-based EAHX control system plan is reported and discussed to optimize energy efficiency and thermal comfort to suit operating conditions under different time zones.

The purpose of this paper is to identify the antecedence of business models for the renewable energy sector, characterise their concepts and structure, and assess the importance of innovation in the creation of value for the customer and for the business in the examined business models. According to the concept of K. Prahalad and M. S. Krishnan, an operational business model consists of three basic components. The first two are social architecture and technical architecture that represent specific resources. The third component comprises business processes. The operating business model according to the principles of the New Era of Innovation was used. The business models were presented as case studies of the following: a photovoltaic farm, a passive building and a local (communal) biogas plant. A desk research method was employed as well as triangulation of the research methods of non-participant observation, unstructured interview and business documentation review, in order to develop... [more]

The date assumed as the beginning of the pandemic in Poland is 4 March 2020, the date of the first confirmed case of the virus. This article presents the actions undertaken by the management of underground hard coal mining plants concerning the risk of epidemic related to SARS-CoV-2. This work shows a set of implemented recommendations, guidelines and decisions, which were established after the appearance of the first wave of cases in Poland. What is more, it discusses measures aiming at reducing the risk of spreading the coronavirus among the mineworkers. The suggestions for different variants of the decision-making process concerning the pandemic and which have an enormous impact on the operating expenses of the company are also made. The paper presents the results of the study on actions taken in individual mining companies and good work practices recommended to be applied.

Coal samples having the same diameter (50 mm) and different length-diameter ratios (l/d), i.e., 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, and 1.0 were tested under dynamic uniaxial impact compression using the Split Hopkinson Pressure Bar (SHPB) experimental system. This study evaluates: (a) The effects of l/d on the energy consumption law and fractal characteristics of coal crushing; (b) The effects of l/d and stress balance on energy dissipation; (c) The effects of l/d and energy consumption density on the fractal characteristics of coal crushing. The findings under different l/d are as follows: (1) The coal samples show similar stress−strain curve shapes in stages including elastic, plastic, and failure stage, which is an “open” shape, the proportion of plastic stage increases, and strain-softening occurs; (2) The dynamic compression dissipation energy and energy consumption ratio of coal shows the same trend, showing two stages with the increase of length-diameter ratio, which increases l... [more]

The development of fully electric and hybrid electric aircraft using fuel cells and batteries has lately received much attention since the technology can contribute to achieving an emission-free world. For hybridisation of fuel cells and batteries, the challenge of integrating different voltage sources to supply power to different loads at different voltage levels has to be met. Presently, this is achieved by using a combination of complex passive circuitry and DC−DC converters. In this paper, a new galvanically isolated DC−DC converter topology is proposed; it integrates a battery and fuel cells as input sources and supplies power to a high voltage (HV) and a low voltage (LV) load simultaneously. The converter enables power flow from the sources to the load, as well as between the sources and power flow back towards the battery during recuperation for recharging the battery during flight. The functionality of the converter design is verified using a real-time (RT) hardware-in-the-loop... [more]

The COVID-19 pandemic has had a huge impact on society. Scientists are working to mitigate the impact in many ways. As a field closely related to human life, building engineering can make a great contribution. In this article, we started with the concept of the smart building as our guide. The impact of COVID-19 on daily energy consumption, information and communication technology, the ventilation of the interior environment of buildings, and the higher demand for new energy technologies such as electric vehicles is an entry point. We discuss how the concept of the smart building and related technologies (refrigeration, measurement, sensor networks, robotics, local energy generation, and storage) could help human society respond to the pandemic. We also analyze the current problems and difficulties that smart buildings face and the possible future directions of this technology.

Green hydrogen from photocatalytic water-splitting and photocatalytic lignocellulosic reforming is a significant proposition for renewable energy storage in global net-zero policies and strategies. Although photocatalytic water-splitting and photocatalytic lignocellulosic reforming have been investigated, their integration is novel. Furthermore, biosynthesis can store the evolved hydrogen and fix the atmospheric carbon dioxide in a biocathode chamber. The biocathode chamber is coupled to the combined photocatalytic water-splitting and lignocellulose oxidation in an anode chamber. This integrated system of anode and biocathode mimics a (bio)electrosynthesis system. A visible solar radiation-driven novel hybrid system comprising photocatalytic water-splitting, lignocellulose oxidation, and atmospheric CO2 fixation is, thus, investigated. It must be noted that there is no technology for reducing atmospheric CO2 concentration. Thus, our novel intensified technology enables renewable and su... [more]

In this study, the performance evaluation of a semi-type floating offshore wind turbine system according to the direction of the incoming waves is investigated. The target model in this this study is a DTU 10 MW reference wind turbine and a LIFES50+ OO-Star Wind Floater Semi 10 MW, which is the semisubmersible platform. Numerical simulation is performed using FAST developed by National Renewable Energy Laboratory (NREL), which is an aero-hydro-servo-elastic fully coupled simulation tool. The analysis condition used in this study is the misalignment condition, which is the wind direction fixed at 0 degree and the wave direction changed at 15 degrees intervals. In this study, two main contents could be confirmed. First, it is confirmed that sway, roll, and yaw motions occur even though the direction of the incoming waves is 0 degree. The cause of the platform’s motion such as sway, roll and yaw is the turbulent wind and gyroscope phenomenon. In addition, the optimal value for the nacelle... [more]