The purpose of the research presented in this paper was to develop an analytical instrument for measuring the efficiency of investing in renewable energy sources suitable for use by the average single-family homeowner. The paper develops an algorithm to quickly estimate the efficiency of small rooftop solar photovoltaic (PV) systems use by households. The algorithm is developed on the basis of the MS Excel software package. It is easy to use and allows estimation of the maximum efficiency of the installation of a photovoltaic system, taking into account the preferences of the household, the technical characteristics of the photovoltaic system, and the parameters of the building and location. The validation of the algorithm was carried out on the example of Opole Province (Poland). The selection of photovoltaic panels is based on 17 types of panels made in different technologies, which allows rational choice of modules based on consumer preferences according to the price/quality ratio.... [more]

Smart integration of different energy sectors on islands could serve as a key to achieve their energy independence and carbon neutrality goals and facilitate the large-scale penetration of renewables. Demonstration projects play a vital role in testing innovative sector-coupling solutions and exploring their synergies in the real-life environment. They also help to build the required market confidence and awareness, verify and enhance the societal acceptance, and identify and prevent unnecessary risks and complications. The aim of this paper is to provide the reader with a comprehensive review of 19 research projects, which concern the demonstration of sector-coupling technologies on European islands. The projects are funded by the European Commission and started between 2010 and 2020. The review focuses on the exploration of various technical aspects of 28 demo pilots. In addition, it addresses objectives, contributions, and novelty of the demonstrations and analyses barriers, challen... [more]

The article discusses the wind tunnel experimental investigation of two turbines (the downstream unit placed fully in the wake of the upstream one) at various turbulence intensity levels and wind turbine separation distances, at a Reynolds number of approximately 105. The velocity deficit due to the upstream turbine operation is reduced as the wake mixes with the undisturbed flow, which may be enhanced by increasing the turbulence intensity. In a natural environment, this may be provoked by natural wind gusts or changes in the wind inflow conditions. Increased levels of turbulence intensity enlarge the plateau of optimum wind turbine operation—this results in the turbine performance being less prone to variations of tip speed ratio. Another important set of results quantifies the influence of the upstream turbine operation at non-optimal tip speed ratio on the overall system performance, as the downstream machine gains more energy from the wake flow. Thus, all power output maximisation... [more]

State space models (SSMs) are important for multi-variable performance analysis and controller design of aero-engines. In order to solve the problems of the traditional state space modeling methods that rely on component-level models (CLMs) and cannot be carried out in real time, an aero-engine state space modeling method based on adaptive forgetting factor online sequential extreme learning machine (AFOS-ELM) is proposed in this paper. The structure of the extreme learning machine (ELM) is determined according to the form of the state space model, and the inverse-free ELM algorithm is used to automatically select the appropriate number of hidden nodes to improve the efficiency of offline initialization. The focus of the ELM on current operation performance is enhanced by the adaptive renewed forgetting factor, which reduces the impact of aero-engine history and deviated data on the current output and improves the accuracy of the model. Then, according to the analytical equation of the... [more]

In addition to the use of waste heat from the vessel’s exhaust gas to save energy onboard, reduce the carbon emissions of the ship, and combine the characteristics of ship waste heat, mathematical modeling and testing of ship waste heat temperature difference power generation were carried out in this study. Finally, an experimental platform for temperature differential power generation was established to assess the impact of influencing agents on the efficiency of temperature differential power generation. The results show that the effect of different thermally conductive greases on the efficiency of temperature differential power generation tablets is basically the same. In addition, the rate of flow of cooling water, the cooling plate area, and the heat source temperature have more significant effects on the open-circuit voltage and maximum output power. The results show that the maximum power output growth rate increases with increasing cooling water flow, reaching 8.26% at 4 L/min.... [more]

Recently, “power cuts” and “coal price surges” have been significant concerns of individuals and societies. The main reasons for a power cut are a recent rapid increase in power consumption, shortage of thermal coal or the large shutdown capacity of thermal power units, resulting in a tight power supply in the power grid. In recent years, the shortage of fossil resources has led to frequent energy crises. In the context of carbon peaks and carbon neutralization, how to better develop electric-energy substitution and eliminate the dependence on fossil energy has become a problem that needs to be solved at present. In this paper, the influencing factors of electric-energy substitution in Beijing are analyzed, and the indexes affecting the electric-energy substitution are outlined. By constructing various machine-learning models, the prediction is performed. The results show that the Gaussian kernel support vector machine model based on a grid search has a good prediction effect on the el... [more]

Brushless doubly fed reluctance generators (BDFRGs) are hopeful generators for using inside variable speed wind turbines (VSWTs), as these generators introduce a promising economical value because of their lower manufacturing and maintenance costs besides their higher reliability. For integrating WT generators, global networks codes require enabling these generators to stay connected under grid disturbances. The behavior of the BDFRG is strongly affected by grid disturbances, due to the small rating of the used partial power converters, as these converters cannot withstand high faults currents which leads to quick tripping of BDFRG. VSWTs can be safeguarded against faults using the crowbar. Usually, the conventual crowbar is shunt connected across the converter to protect it, but this configuration leads to absorbing reactive power with huge amounts from the grid, leading for more voltage decaying and more power system stability deterioration. This study proposes a simpler self-control... [more]

Studies of carbon emissions typically focus on price and tax effects or technology. We argue that the two are closely linked within an economy in disequilibrium. Our goals are twofold: (1) to examine the combined role of: low CO2 technology, fuel taxes and CO2 tax on taming CO2 emissions and (2) to build a counterfactual analysis by capturing anything else that causes emissions to diverge from the trend such as renewable energy, energy laws and the state of the economy. The equilibrium correction model (EqCM) suggests that emissions have a long-term relationship with economic growth, fossil fuel use, taxes and clean power sources. Both oil and gas extraction and economic growth raise Norway’s emissions, offsetting the mitigating effect of taxes. Sweden´s carbon fuel tax elasticity is 20%, a value far above Norway´s elasticity, even though these carbon taxes were phased-in under a period of macroeconomic instability, weakening their effectiveness. The income elasticity of emissions is n... [more]

The lithium-ion battery (LIB) has the advantages of high energy density, low self-discharge rate, long cycle life, fast charging rate and low maintenance costs. It is one of the most widely used chemical energy storage devices at present. However, the safety of LIB is the main factor that restricts its commercial scalable application, specifically in hazardous environments such as underground coal mines. When a LIB is operating under mechanical and electrical abuse such as extrusion, impact, overcharge and overheating, it will trigger thermal runaway and subsequently cause fire or even an explosion. According to the relevant requirements in IEC60079, the explosion-proof protection of LIB can be adapted to the working environment of high dust and explosive gas environments such as in the mining face of coal production. This paper presents an overview of the LIB-relevant technology, thermal runaway, safety and applications in the general mining industry with implications to establish a t... [more]

The gradually increased penetration of photovoltaic (PV) power into electric power systems brings an urgent requirement for accurate and stable PV power forecasting methods. The existing forecasting methods are built to explore the function between weather data and power generation, which ignore the uncertainty of historical PV power. To manage the uncertainty in the forecasting process, a novel ensemble method, named the evidential extreme learning machine (EELM) algorithm, for deterministic and probabilistic PV power forecasting based on the extreme learning machine (ELM) and evidential regression, is proposed in this paper. The proposed EELM algorithm builds ELM models for each neighbor in the k-nearest neighbors initially, and subsequently integrates multiple models through an evidential discounting and combination process. The results can be accessed through forecasting outcomes from corresponding models of nearest neighbors and the mass function determined by the distance between... [more]

The largest carbonate condensate field has been found in the Tarim Basin, NW China. Different from sandstone condensate gas reservoirs, however, the conventional gas injection for pressure maintenance development is not favorable for Ordovician fracture-cave reservoirs. Based on this, in this paper, 21 sets of displacement experiments in full-diameter cores and a pilot test in 11 boreholes were carried out to study enhanced oil recovery (EOR) in complicated carbonate reservoirs. The experimental results show that the seepage channels of the gas condensate reservoirs are fractures, which are quite different from sandstone pore-throat structures. Condensate oil recovery using water injection was up to 57−88% in unfilled fractured caves and at ca. 52−80% in sand-filled fractured caves. These values are much higher than the 14−46% and 17−58% values obtained from the depletion and gas injection experiments, respectively. The water injection in 11 wells showed that the condensate oil recover... [more]

Micro gas turbines fit perfectly with the energy roadmap to 2050: on-site, small scale power generation, combined with heat recovery from exhaust gas, offers an opportunity to deploy primary energy saving and pollutant emission reduction. Moreover, their flexibility enables fuel switching from natural gas (NG) to carbon-free fuels such as hydrogen and ammonia. This study aims to explore the potential of direct combustion of ammonia in a micro gas turbine (MGT), from a thermodynamic point of view. A modeling procedure was developed to simulate the behavior of a 100 kW MGT operating at full and part-load. After validation with NG as fuel, an increasing fraction of ammonia was fed to the combustor to predict performance variations in terms of electric, thermal and total efficiency, as well as exhaust gas composition, for a load range between 40% and 100%. Additional relevant details, related to the interaction between compressor and turbine in the single-shaft arrangement, were discussed... [more]

Both electrical and thermal efficiencies combine in determining and evaluating the performance of a PV/T collector. In this study, two PV/T systems consisting of poly and monocrystalline PV panels were used, which are connected from the bottom by a heat exchanger consisting of a spiral tube through which a nanofluid circulates. In this study, a base fluid, water, and ethylene glycol were used, and iron oxide nanoparticles (nano-Fe2O3) were used as an additive. The mixing was carried out according to the highest specifications adopted by the researchers, and the thermophysical properties of the fluid were carefully examined. The prepared nanofluid properties showed a limited effect of the nanoparticles on the density and viscosity of the resulting fluid. As for the thermal conductivity, it increased by increasing the mass fraction added to reach 140% for the case of adding 2% of nano-Fe2O3. The results of the zeta voltage test showed that the supplied suspensions had high stability. Whe... [more]

One effect of moisture ingress on solar panels is potential induced degradation (PID). Solar panels affected by PID experience large leakage currents between the solar cells and the module’s frame, which leads to substantial power degradation. In the present work, the temperature coefficients of 3 old PV panels affected by PID were investigated. In the electroluminescence images, solar cells nearer to the edge of the modules appear darker due to ohmic shunting. IR thermal images acquired under clear sky outdoor conditions show that the majority of the warmer cells (hotspots) were located closer to the edge of the modules. The difference in cell temperature (∆T) due to PID effect ranges from 7 °C to 15 °C for the 3 field-aged modules. The average temperature coefficient of efficiency (βηm) was found to be −0.5%/°C. Also, it was observed that the temperature coefficients of open circuit voltage (βVoc = −0.4%/°C), maximum power point voltage (βVmpp = −0.5%/°C), and fill factor (βFF = −0.2... [more]

With the improvement of natural gas network interconnection, the network topology becomes increasingly complex. The significance of analyzing topology is gradually becoming prominent, and a systematic analysis method is required. This paper selects two typical natural gas pipeline networks: one in Europe, and the other in North China. Based on complex network theory and the nature of natural gas pipelines, topological models for the two typical networks were established and the evaluation indexes were developed based on four factors: network type, overall topological structure characteristics, path-related topological structure characteristics, and topological structure robustness. Using these indexes, the topological structure of the two typical networks is compared and analyzed quantitatively. The comparison shows that the European network topology has more redundancy, higher transmission efficiency, and greater robustness. The topology analysis method proposed in this paper is pract... [more]

Vehicle electrification is one of the main growing trends with an identified growth capacity of 15% until 2030 [...]

In view of the nonlinear mechanical characteristics of rock foundation creep fracture and its influence on the stability of wind turbine under wind load, based on the influence of wind load, this paper proposed the elastoplastic creep fracture and rock foundation bearing capacity on wind turbine. Considering the superstructure concrete with rock foundation and its boundary conditions, the wind load standard value was obtained and wind turbine system composition was constructed. The two grades of freedom system of viscous damping vibration model was proposed. Furthermore, the frequency characteristic equations and the relations of the first- and second-order natural frequencies were obtained. Considering plastic yield theory on power hard rock base material, the analytical expressions of principal stress distribution, plastic zone, and plastic state of I-II composite crack were obtained and used for coupling Mohr−Coulomb plastic yield condition and creep fracture characteristics. Furthe... [more]

20 RT (70 kW) two-evaporator heat pump system was developed, manufactured, and tested to enhance the cooling performance using a vapor−liquid separator. In the proposed system, two evaporators are connected in series, and the refrigerant passing through the primary evaporator is separated into vapor and liquid using a vapor−liquid separator. The vapor refrigerant is passed to the compressor, whereas the liquid phase flows into the second evaporator. The amount of vapor refrigerant sent to the compressor can be adjusted through a needle valve opening (0%, 50%, and 100%). The influence of this parameter on the cooling performance was analyzed. The cooling performance tests were repeated five times to check repeatability. Data associated with the air and refrigerant sides were obtained, and the average coefficients of performance (COPs) were calculated. The average COP associated with the air side was approximately 5% lower than that pertaining to the refrigerant side owing to the heat lo... [more]

Solar energy storage in the form of chemical energy is considered a promising alternative for solar energy utilization. High-performance solar energy conversion and storage significantly rely on the sufficient active surface area and the efficient transport of both reactants and charge carriers. Herein, the structure evolution of titania nanotube photocatalyst during the photoanode fabrication and its effect on photoelectrochemical activity in a microfluidic all-vanadium photoelectrochemical cell was investigated. Experimental results have shown that there exist opposite variation trends for the pore structure and crystallinity of the photocatalyst. With the increase in calcination temperature, the active surface area and pore volume were gradually declined while the crystallinity was significantly improved. The trade-off between the gradually deteriorated sintering and optimized crystallinity of the photocatalyst then determined the photoelectrochemical reaction efficiency. The optima... [more]

A study of energy supply alternatives was carried out based on a cogeneration fuel cell system fed from the natural gas network of compact Mediterranean cities. As a case study it was applied to the residential energy demands of the L’Illa Perduda neighbourhood, located in the east of the city of Valencia and consisting of 4194 residential cells. In total, eight different alternatives were studied according to the load curve, the power of the system, the mode of operation and the distribution of the fuel cells. In this way, the advantages and disadvantages of each configuration were found. This information, together with the previous study of the energy characteristics of the neighbourhood, enabled selection of the most promising configuration and to decide whether or not to recommend investment. The chosen configuration was a centralised system of phosphoric acid fuel cells in cogeneration, with approximately 4 MW of thermal power and an operating mode that varied according to the out... [more]

The region of Upper Silesia, located in southern Poland, is characterised by very high emissions of carbon dioxide into the air—the annual emission exceeds 33 Mt CO2 and the emission ‘per capita’ is 7.2 t/y in comparison to the EU average emission per capita 6.4 t/y and 8.4 t/y for Poland in 2019. Although in the region there are over 100 carbon dioxide emitters covered by the EU ETS, over 90% of emissions come from approximately 15 large hard coal power plants and from the coke and metallurgical complex. The CCUS scenario for Upper Silesia, which encompasses emitters, capture plants, transport routes, as well as utilisation and storage sites until 2050, was developed. The baseline scenario assumes capture of carbon dioxide in seven installations, use in two methanol plants and transport and injection into two deep saline aquifers (DSA). The share of captured CO2 from flue gas was assumed at the level of 0.25−0.9, depending mainly on the limited capacity of storage. To recognise the vi... [more]

In this paper, the effect of house envelopes including thermal bridges on the daily, monthly, and annual consumption of the air conditioning system of a detached house and an attached house, with a façade in the east, west, north, or south direction, is investigated; moreover, the capacity of the air conditioning system is calculated for detached and attached houses based on the maximum hourly peak load during severe weather conditions. The four tested house envelopes are exterior insulation and finish system (EIFS), autoclaved aerated concrete block (AAC-B), classical (cement blocks with insulation in between), and AAC column and beam (AAC-CB). The work is conducted using a method that combines the finite element method (COMSOL Multiphysics), building simulation (EnergyPlus), and the Engineering Equation Solver (EES) programs. The results indicated that the annual consumption of the air conditioning system using AAC-B, classical, and AAC-CB envelopes is larger than that of EIFS by abo... [more]

The adoption of green building technology has become significant for ensuring sustainable development; it has become the main step to a sustainable future. The designs for green buildings include finding a balance between comfortable home construction and a sustainable environment. Moreover, the application of emerging technology is also used to supplement existing methods in the development of greener buildings to preserve a sustainable built environment. The main problem of this research is how to tackle the environmental parameters balance based on new techniques that are being used for green building optimization. To mitigate the cumulative effect of the constructed climate on human wellbeing and the regular ecosystem, the most popular goals for green buildings should be planned. This can be achieved by efficient use of natural resources such as energy, water, and other resources and minimizing waste. This will contribute to the security of occupant health, enhancement of work perf... [more]

By creating a special edition entitled Fundamentals of Enhanced Oil Recovery, the editors focus on the problem of the global increase in energy demand [...]

Whilst various new technologies for power generation are continuously being evaluated, the owners of almost-new facilities, such as combined-cycle gas turbine (CCGT) plants, remain motivated to adapt these to new circumstances and avoid the balance-sheet financial impairments of underutilization. Not only are the owners reluctant to decommission the legacy CCGT assets, but system operators value the inertia and flexibilities they contribute to a system becoming predominated with renewable generation. This analysis therefore focuses on the reinvestment cases for adapting CCGT to hydrogen (H2), synthetic natural gas (SNG) and/or retrofitted carbon capture and utilization systems (CCUS). Although H2, either by itself or as part of SNG, has been evaluated attractively for longer-term electricity storage, the business case for how it can be part of a hybrid legacy CCGT system has not been analyzed in a market context. This work compares the power to synthetic natural gas to power (PSNGP) ad... [more]