Thermal energy storage (TES) systems for concentrated solar power plants are essential for the convenience of renewable energy sources in terms of energy dispatchability, economical aspects and their larger use. TES systems based on the use of concrete have been demonstrated to possess good heat exchange characteristics, wide availability of the heat storage medium and low cost. Therefore, the purpose of this work was the development and characterization of a new concrete-based heat storage material containing a concrete mix capable of operating at medium−high temperatures with improved performance. In this work, a small amount of shape-stabilized phase change material (PCM) was included, thus developing a new material capable of storing energy both as sensible and latent heat. This material was therefore characterized thermally and mechanically and showed increased thermal properties such as stored energy density (up to +7%, with a temperature difference of 100 °C at an average operat... [more]

The digitalization of the forest sector, the increased demand of energy-wood, as well as faster market changes have increased the number of challenges for wood procurement of the forest industry. The aim of the study is to optimize wood procurement (upstream of supply chain) of energy and material production in integrated situations, and to consider the effects of production changes on the management of procurement regions. Three scenarios described integrated production situations in a carbon-neutral forest industry: (1) declining export, (2) energy reform, and (3) extensive energy reform. Time-varying capital-, cost-, and energy efficiency of the dynamic wood-flow model affected the competitiveness of the procurement regions. As a novel contribution, energy efficiency was modeled using the price of emission allowance as a cost parameter. The results show the positive effects of the energy reforms, which partly compensate for the declining exports. In addition, it is possible to chang... [more]

In recent years, innovative magnetic materials have been introduced in the field of electrical machines. In the ambit of soft magnetic materials, laminated steels guarantee good robustness and high magnetic performance but, in some high-frequency applications, can be replaced by Soft Magnetic Composite (SMC) materials. SMC materials allow us to reduce the eddy currents and to design innovative 3D magnetic circuits. In general, SMCs are characterized at room temperature, but as electrical machines operate at high temperature (around 100 °C), an investigation analysis of the temperature effect has been carried out on these materials; in particular, three SMC samples with different binder percentages and process parameters have been considered for magnetic and energetic characterization.

Every year, the number of exploited mine workings necessary to seal the exploited mines increases in the world. As a result of experiments, technologies are developed that allow slurry to be pumped to fill free rock spaces or to liquidate rock mass discontinuities. The slurry preparation technologies can be divided into: subsurface and surface preparation and injection. Due to the pressure that forces the sealing slurry to move, the following can be distinguished: pressure technologies and technologies of gravity injection. The effectiveness of the work is determined by the correct selection of the technique and technology of the treatment and the selection of the optimal cement slurry recipe. The type of sealing liquid is especially important during works related to filling the exploited mine workings in salt mines. Therefore, this article presents the criteria for the selection of slurry recipes and their technological parameters, used for sealing and strengthening the salt rock mass... [more]

In spite of the fact that the flexibility of the crankshaft of diesel engines exhibits notable nonlinearities, analytical modeling of such nonlinearities is not yet realized. The present study thus analytically models the effect of eccentricity on flexible crankshaft and piston secondary motion. The eccentricity of the crankshaft is modeled as the summation of the hydrodynamic eccentricity and the dynamic mass eccentricity of the crankshaft. The study also models the absolute value of the vibrational dynamic displacement of the center of the crankshaft. The paper proves that such dynamic displacement of the center of the crankshaft is sensitive to the changes in its independent variables. It was found that the most influential parameters on the dynamic displacement of the center of the crankshaft due to vibration are the natural frequency and the eccentricity of the crankshaft. The modeling of the dynamic displacement in a flexible crankshaft was validated using a case study based on t... [more]

This paper presents a modelling of nanofluid flow using Caputo fractional derivatives through conservative equations of mass and momentum, and provides an exact solution on un-steady convective flow over a vertical plate with the mass diffusion effect, in association with an energy equation. H2O is the base liquid with clay nanoparticles floating in it in a uniform way. Boussinessq’s approach is used in the momentum equation for pressure gradient. The non-dimensional fluid temperature, species concentration and fluid transport are derived together with Jacob Fourier sine and Laplace transform techniques in terms of exponential decay function, and the inverse is computed further in terms of the Mittag-Leffler function. The impact of various physical quantities is interpreted with the fractional order of the Caputo derivatives. The obtained temperature, transport and species concentration profiles show behaviors for 0 < α < 1, where α is the fractional parameter. The rate of heat a... [more]

The influences of curing pressure on the physical and mechanical property development of oil well cement during long-term curing were studied. Five silica-enriched cement slurries designed without and with reinforcement materials (latex fiber and nano-graphene) were autoclaved at 200 °C under two different pressures. The low pressure (50 MPa) curing was conducted for 2, 60, 90 and 180 days; the high pressure (150 MPa) curing was conducted for 2 and 360 days. The physical and mechanical properties of set cement were characterized by compressive strength, Young’s modulus, and water/gas permeability; the mineral composition and microstructure were determined by X-ray diffraction, mercury intrusion porosimetry, thermogravimetry and scanning electron microscope. Test results showed that high pressure (150 MPa) curing led to a more compact microstructure, which reduced the rate of strength retrogression in the long term. Samples with reinforcement materials, especially the latex fiber, showe... [more]

In this article, numerical simulations of the rotational flow of water-based magnetohydrodynamic (MHD) nanofluid containing single-wall carbon nanotube (SWCNT) and hybrid nanofluid containing single- and multiple-wall carbon nanotube (SWCNT-MWCNT) over a stretching sheet are performed. The primary goal is to improve thermal transport efficiency due to CNTs extraordinary thermal conductivity. The 3D governing equations for microorganism concentration, energy, momentum, concentration, and mass conservation are transformed into 1D ordinary differentiation via similarity transformations. In a MATLAB environment, the resultant system of equations (ODEs) are then solved using Runge−Kutta fourth order with the shooting process. Tables and graphs were used to show the results of physical parameters. According to our findings, enhancing the rotational parameter λ and the magnetic field M reduce the base fluid velocity along the x-axis, and on the other hand, the opposite tendency is shown along... [more]

The purpose of this study is to characterize and compare the microstructural features of the main morphotypes occurring in the char obtained at 850−950 °C by fluidized bed gasification of lignite from the “Szczerców” deposit (Central Poland), and to bring new insights into the knowledge on the origin of these morphotypes. Optical microscopy and Raman spectroscopy were used. The char is composed mostly of crassinetwork and inertoid, accompanied by tenuinetwork and small amounts of fusinoid. Tenuinetwork originates mainly from textinite, crassinetwork is formed from attrinite, while inertoid results from transformation of strongly gelified macerals such as densinite and ulminite. Similarities in the microstructure of tenuinetwork and crassinetwork as well as inertoid and fusinoid are observed. Inertoid and fusinoid are composed of larger aromatic systems, with lower amount of alkyl-aryl structures, and their microstructure is better organized compared to tenuinetwork and crassinetwork. I... [more]

Neat well cement experience significant strength retrogression at high temperatures above 110 °C, especially at approximately 150 °C. To reveal the mechanism of performance degradation and guide the preparation of high-performance cement, we investigate the hydration process, mechanical behavior, and fracture process for well cement at the temperature of 150 °C based on molecular dynamics simulations and experiments. From triaxial pressure tests and Brazilian splitting tests, the strength, elastic modulus, and Poisson’s ratio of well cement decrease drastically with temperature increases from 80 °C to 150 °C. According to XRD, TG/DTG/DSC, and SEM, the hydration degree is insufficient, and larger pores exist in the microstructures. As the main binding phase of well cement, the mechanism of calcium silicate hydrates (C-S-H) influenced by curing temperatures is investigated through molecular dynamics simulations. C-S-H with calcium/silicon ratios (C/S) of 1.1 and 1.8 are simulated in the... [more]

Silicon is one of the most used semiconductor materials around the world. This research was conducted on silicon to improve its opto-electrical properties including bandgap and optical conductivity using direct ultrafast pulsed nanostructure formation (DUPNF). The power and frequency of high-intensity picosecond laser pulses were varied, and nanostructures were formed. The optical properties were examined using optical spectroscopy in both VIS and NIR. The structural characteristics were examined using EDX and SEM imaging. It was found that varying the power and frequency of the laser processing caused a change in the bandgap, as well as the structural characteristics of the silicon semiconductor. Increasing the frequency and power showed the formation of nanostructures of silicon and their variation in the properties of the formed nanostructures. The critical breakdown field of the silicon nanostructures was higher than the bulk silicon.

The energy transition towards efficient energy production, transport, and use, renewable energy (RE) technologies and innovative energy management brings benefits to reducing greenhouse gas (GHG) emissions and achieving climate targets [...]

In terms of human needs, water has traditionally been regarded as the most significant bioresource. However, there are still limitations on the quality and mobility of drinking water. Renewable energy technologies are at the forefront of research to bridge the gap between conventional fuels and renewable energy systems. Currently, the main objective is to speed up the solar water disinfection process of contaminated water when hybrid nanofluid mixtures are added. Five hybrid nanofluid mixtures containing different amounts of aluminum oxide (Al2O3) and Titanium oxide (TiO2) nanoparticles were used in this study, focusing on how they affected the solar disinfection of polluted water. Five hybrid nanofluid mixtures of different volumes and volume concentrations were used for this purpose; each one was introduced into a contaminated water-contained glass container with a volume of 500 mL. Additionally, a sixth container, used exclusively for comparison, was filled with tainted water. All c... [more]

A methodology is outlined for equipment selection for the extraction of secondary deposits, supported by the Multiple Criteria Decision Making (MCDM) tool based on the Analytic Hierarchy Process (AHP) method and applied to evaluate its impact on the mining system’s performance and the viability of the rock mining project. The equipment selection analysis affords us the means to explore selected options, taking technological and economic parameters into account, and opening the way for making the decision to begin or discontinue mining operations. The simulation results show how maintaining the mining site in a good condition impacts on the actual duty cycle of mining equipment, the time required to complete the hauling task and the operating costs.

Cultivating microalgae requires a nitrogen and phosphorous feed source. Anaerobic digestion waste (digestate) provides a cheap sustainable feedstock for these materials. Previous studies have successfully demonstrated the feasibility of nutrient recovery and subsequent algae growth. There is now a need to fully characterise digestate filtration to improve our understanding of this process prior to its commercialisation. In this work, digestate filtration is characterised at bench scale using frontal (dead-end) filtration and a 100 kDa MWCO ultrafiltration membrane. Our experiments demonstrated rapid cake formation causing significant flux decline. The steady-state permeate flux for digestate was 2.4 to 4.8 L m−2 h−1, a reduction of ~90% compared to clean water flux. The specific cake resistance was ~1015 m kg−1 and the compressibility index 1.07. A series of four filtration and cleaning cycles showed 90% flux recovery following a clean water wash. Digestate filtration was then evaluate... [more]

Based on the synergistic effect of ripening and hydrogen ion etching in a hydrothermal solution, a simple, facile, and low-cost new strategy was demonstrated to prepare multi-channel surface-modified amorphous Fe2O3 nanospheres as anodes for Li-ion batteries in this study. Compared with polycrystalline Fe2O3, the conversion reaction between amorphous Fe2O3 and lithium ions has a lower Gibbs free energy change and a stronger reversibility, which can contribute to an elevation in the cycle capability of the electrode. Meanwhile, there are abundant active sites and more effective dangling bonds/defects in amorphous materials, which is beneficial to promote charge transfer and lithium-ion migration kinetics. The Galvanostatic intermittent titration analysis results confirmed that the amorphous Fe2O3 electrode had a higher Li+ diffusion coefficient. In addition, the surfaces of the amorphous nanospheres are corroded to produce multiple criss-cross channels. The multi-channel surface structu... [more]

The current geometric increase in the global deployment of solar photovoltaic (PV) modules, both at utility-scale and residential roof-top systems, is majorly attributed to its affordability, scalability, long-term warranty and, most importantly, the continuous reduction in the levelized cost of electricity (LCOE) of solar PV in numerous countries. In addition, PV deployment is expected to continue this growth trend as energy portfolio globally shifts towards cleaner energy technologies. However, irrespective of the PV module type/material and component technology, the modules are exposed to a wide range of environmental conditions during outdoor deployment. Oftentimes, these environmental conditions are extreme for the modules and subject them to harsh chemical, photo-chemical and thermo-mechanical stress. Asides from manufacturing defects, these conditions contribute immensely to PV module’s aging rate, defects and degradation. Therefore, in recent times, there has been various inves... [more]

Biorefineries are industrial facilities where biomass is converted into chemicals, fuels and energy. The use of lignocellulose as raw material implies the development of pretreatments to reduce its recalcitrant character prior to the processes that lead to the synthesis of the products of interest. These treatments are based on physico-chemical processes where it is necessary to use acids, bases, oxidants, and high pressure and temperature conditions that lead to the depolymerization of lignocellulose at the expense of generating a series of streams that must be treated later or to the production of by-products. In recent years, mechanochemistry is becoming relevant in the design of processes that help in the depolymerization of lignocellulose. These mechanochemical processes are being used in combination with chemicals and/or enzymes, allowing the use of minor loads of reagents or enzymes. In this review, the advances achieved in the use of mechanochemistry for treating lignocellulosi... [more]

The purpose of the current study is to investigate the non-Newtonian unsteady Williamson fluid on a stretching/shrinking surface along with thermophoresis and Brownian effects. Basically, the model consists of a time-dependent magnetic field. The fluid is considered to be electrically conducting due to the effect of the external magnetic field. The values of magnetic Reynolds number are so small that the induced magnetic field is assumed to be negligible. In the concentration equation, the effects of Brownian motion and thermophoresis are discussed. Employing the similarity transformations, the governing nonlinear Partial Differential Equations (PDEs) are converted into the Ordinary Differential Equations (ODEs). The resulting ODEs are solved with the combined effects of the Successive Over Relaxation (SOR) method and Finite Difference Method (FDM). The impact of all the including parameters such as suction parameter, injection parameter, stretching/shrinking parameter, the ratio of vi... [more]

The article deals with the issue of the influence of selected material and construction solutions for a floor in a historic wooden building on heat exchange with the ground. The scope of the work included continuous measurements of selected parameters of internal and external microclimate, which were later used for numerical analysis of selected calculation variants. The research was carried out in a historic wooden church located in southern Poland. The research period covered 2019, while all measurements were performed every 1 h. For the variant analysis, a building with a wooden and stone floor was adopted. The influence of the heating system on the heat exchange with the ground for wooden and stone floors was also analysed. As a result of a detailed analysis, it was found that the material and construction solutions, as well as the heating system, have a significant impact on the formation of heat exchange with the ground. The building with a wooden floor was characterised by signi... [more]

Accurately predicting the critical differential pressure (CDP) of sand production contributes to improving the peak-shaving capacity and ensuring safe operation of underground gas storage (UGS). The CDP of sanding production in the target wells of the UGS was predicted coupling laboratory tests, inversed analysis with well logging data and numerical simulations. The in-situ mechanical properties of rock were estimated by coupling the laboratory test results and well-logging data. The in-situ stress field of the target formation was then deduced through inversed analysis coupled finite element method (FEM) and genetic algorithm (GA), based on the existing known stress data and the seismic data of the measured points. Using the critical strain limit (CSL) of 5‰ as the sanding criterion of the wellbore, the CDPs of the gas production in the UGS were predicted, which was 5.59 MPa, 3.98 MPa, and 4.01 MPa for well #1, well #2 and well #3, when the pressure of the gas storage was 30 MPa, resp... [more]

The article discusses the methods used to measure the water content in liquid dielectrics. The pros and cons of currently used methods are presented. The main aim of the research was to check the possibility of using near-infrared spectroscopy to measure the water content in liquid dielectrics. On the basis of the conducted research, the absorbance bands are indicated that can be used to determine the water content in synthetic and natural esters. These bands are centered at 1901 and 1904 nm for natural and synthetic esters, respectively. The determined dependence of the absorbance on the water content in liquid dielectrics confirmed the linear nature of this relationship. Moreover, the influence of liquid aging degree on the result of absorbance measurements was checked. The verification of the method allowed for confirming the possibility of using near-infrared spectroscopy for the reliable quantitative analysis of water content in synthetic and natural esters.

Most of the charcoal in the world comes from small and medium-sized producers, using rudimentary carbonization kilns that require significant time or energy during the heating and cooling stages of the process. Despite advances in improving the performance, the influence of materials used in the sidewalls of these kilns has been scarcely studied. Therefore, based on numerical simulations, the present study analyses the thermal performance of cylindrical sidewalls composed of combinations of metallic materials, ceramic materials, and insulating blankets grouped in three configurations: configuration I (sidewall with just one material), configuration II (sidewall with two materials assembled in series), and configuration III (pivoting sidewall). Results were encouraging, especially when comparing kiln configuration I with the novel configuration III. Simulations suggested that the proposed configuration III could reduce the heating time by 62%, the cooling time by 91%, the heat supplied... [more]

In this work, we develop a hybrid battery thermal management (BTM) system for a 7 × 7 large battery module by coupling an epoxy resin (ER)-enhanced phase change material (PCM) module with internal liquid cooling (LC) tubes. The supporting material of ER greatly enhances the thermal stability and prevents PCM leakage under high-temperature environments. In addition, the other two components of paraffin and expanded graphite contribute a large latent heat of 189 J g−1 and a high thermal conductivity of 2.2 W m−1 K−1 to the PCM module, respectively. The LC tubes can dissipate extra heat under severe operating conditions, demonstrating effective secondary heat dissipation and avoiding heat storage saturation of the module. Consequently, during the charge-discharge tests under a 40 °C ambient temperature, the temperature of the PCM-LC battery module could be maintained below 40.48, 43.56, 45.38 and 47.61 °C with the inlet water temperature of 20, 25, 30 and 35 °C, respectively. During the c... [more]

Worldwide practices have proven that gas-assisted gravity drainage can obviously enhance oil recovery, and this technology can be especially effective for reservoirs with a thick formation and large inclination angle. For the successful implementation of this process, a key technology is the stable control of gas−oil interface during gas injection. For a detailed exploration of this technique, a three-stage permeable visual model was designed and manufactured, with permeability decreasing from top to bottom, thus, a reverse rhythm reservoir was effectively modeled. Then the experiment concerning CO2-assisted gravity drainage was carried out with the adoption of a self-developed micro visual displacement device. This study mainly focused on the micro migration law of gas−oil interface and the development effects of CO2-assisted gravity drainage. According to the experiments, CO2 fingering somewhat happens in the same permeable layer from the beginning of gas injection. However, phenomen... [more]