Machine-learning diagnostic systems are widely used to detect abnormal conditions in electrical equipment. Training robust and accurate diagnostic systems is challenging because only small databases of abnormal-condition data are available. However, the performance of the diagnostic systems depends on the quantity and quality of the data. The training database can be augmented utilizing data augmentation techniques that generate synthetic data to improve diagnostic performance. However, existing data augmentation techniques are generic methods that do not include additional information in the synthetic data. In this paper, we develop a model-based data augmentation technique integrating computer-implementable electromechanical models. Synthetic normal- and abnormal-condition data are generated with an electromechanical model and a stochastic parameter value sampling method. The model-based data augmentation is showcased to detect an abnormal condition of a distribution transformer. Fir... [more]

Higher order spectra exhibit a powerful detection capability of low-energy fault-related signal components, buried in background random noise. This paper investigates the powerful nonlinear non-stationary instantaneous wavelet bicoherence for local gear fault detection. The new methodology of selecting frequency bands that are relevant for wavelet bicoherence fault detection is proposed and investigated. The capabilities of wavelet bicoherence are proven for early-stage fault detection in a gear pinion, in which natural pitting has developed in multiple pinion teeth in the course of endurance gearbox tests. The results of the WB-based fault detection are compared with a stereo optical fault evaluation. The reliability of WB-based fault detection is quantified based on the complete probability of correct identification. This paper is the first attempt to investigate instantaneous wavelet bicoherence technology for the detection of multiple natural early-stage local gear faults, based on... [more]

In the manufacture squirrel-cage rotors of asynchronous motors, a high standard of quality is required in every part of the production cycle. The die casting process usually creates porosity in the rotor bars. This most common defect in the rotor often remains hidden during the entire assembly of the machine and is usually only detected during final testing of the motor, i.e., at the end of the production process. This leads to unnecessary production costs. Therefore, the aim is to conduct a continuous control immediately after the rotor has been cast before further processing. In our paper, we are interested in selecting a suitable method of offline rotor diagnostics of an asynchronous motor that would be effective for these needs. In the first step, the selection of the method and its integration into the overall manufacturing process is carried out. The arrangement of the sensors and their calibration is then simulated on a 2D Finite Element Model of the rotor. The proposed offline... [more]

Photovoltaic power plants nowadays play an important role in the context of energy generation based on renewable sources. With the purpose of obtaining maximum efficiency, the PV modules of these power plants are installed in trackers. However, the mobile structure of the trackers is subject to faults, which can compromise the desired perpendicular position between the PV modules and the brightest point in the sky. So, the diagnosis of a fault in the trackers is fundamental to ensure the maximum energy production. Approaches based on sensors and statistical methods have been researched but they are expensive and time consuming. To overcome these problems, a new method is proposed for the fault diagnosis in the trackers of the PV systems based on a machine learning approach. In this type of approach the developed method can be classified into two major categories: supervised and unsupervised. In accordance with this, to implement the desired fault diagnosis, an unsupervised method based... [more]

The main goal of this paper is to review and evaluate how we can take advantage of state-of-the-art machine learning techniques and apply them in wind energy operation conditions monitoring and fault diagnosis, boosting wind turbines’ availability. To accomplish this, we focus our work on analysing the current techniques in predictive maintenance, which are aimed at acting before a major failure occurs using condition monitoring. In particular, we start framing the predictive maintenance problem as an ML problem to detect patterns that indicate a fault on turbine generators. Then, we extend the problem to detect future faults. Therefore, this review will consist of analysing techniques to tackle the challenges of each machine learning stage, such as data pre-processing, feature engineering, and the selection of the best-suited model. By using specific evaluation metrics, the expected final result of using these techniques will be an improvement in the early prediction of a future fault... [more]

The world’s energy consumption is outpacing supply due to population growth and technological advancements. For future energy demands, it is critical to progress toward a dependable, cost-effective, and sustainable renewable energy source. Solar energy, along with all other alternative energy sources, is a potential renewable resource to manage these enduring challenges in the energy crisis. Solar power generation is expanding globally as a result of growing energy demands and depleting fossil fuel reserves, which are presently the primary sources of power generation. In the realm of solar power generation, photovoltaic (PV) panels are used to convert solar radiation into energy. They are subjected to the constantly changing state of the environment, resulting in a wide range of defects. These defects should be discovered and remedied as soon as possible so that PV panels efficiency, endurance, and durability are not compromised. This paper focuses on five aspects, namely, (i) the vari... [more]

The health of the hydroelectric generator determines the safe, stable, and reliable operation of the hydropower station. In order to keep the hydroelectric generator in a better state of health and avoid accidents, it is crucial to detect its faults. In recent years, fault detection methods based on sound and vibration signals have gradually become research hotspots due to their high sensitivity, achievable continuous dynamic monitoring, and easy adaptation to complex environments. Therefore, this paper is a supplement to the existing state monitoring and fault diagnosis system of the hydroelectric generator; it divides the hydroelectric generator into two significant parts: hydro-generator and hydro-turbine, and summarizes the research and application of fault detect technology based on sound signal vibration in hydroelectric generator and introduces some new technology developments in recent years, and puts forward the existing problems in the current research and future development... [more]

In this work, a new approach was developed for the detection of engine misfire based on the long short-term memory recurrent neural network (LSTM RNN) using crank speed signal. The datasets are acquired from a six-cylinder-inline, turbo-charged diesel engine. Previous works investigated misfire detection in a limited range of engine running speed, running load or misfire types. In this work, the misfire patterns consist of normal condition, six types of one-cylinder misfire faults and fifteen types of two-cylinder misfire faults. All the misfire patterns are tested under wide range of running conditions of the tested engine. The traditional misfire detection method is tested on the datasets first, and the result show its limitation on high-speed low-load conditions. The LSTM RNN is a type of artificial neural network which has the ability of considering both the current input in-formation and the previous input information; hence it is helpful in extracting features of crank speed in w... [more]

This paper aims to develop an efficient pattern recognition method for engine fault end-to-end detection based on the echo state network (ESN) and multi-verse optimizer (MVO). Bispectrum is employed to transform the one-dimensional time-dependent vibration signal into a two-dimensional matrix with more impact features. A sparse input weight-generating algorithm is designed for the ESN. Furthermore, a deep ESN model is built by fusing fixed convolution kernels and an autoencoder (AE). A novel traveling distance rate (TDR) and collapse mechanism are studied to optimize the local search of the MVO and speed it up. The improved MVO is employed to optimize the hyper-parameters of the deep ESN for the two-dimensional matrix recognition. The experiment result shows that the proposed method can obtain a recognition rate of 93.10% in complex engine faults. Compared with traditional deep belief networks (DBNs), convolutional neural networks (CNNs), the long short-term memory (LSTM) network, and... [more]

This paper studies the problem of fault detection for continuous time linear switched systems in the presence of disturbance. For this purpose, a fault detection sliding mode observer approach is designed to generate the residual signal. To minimize the effect of disturbance from the residual, the problem is formulated into H∞ filtering technique to increase more robustness. To deal with the issue of the switched systems stability, the Lyapunov-Krasovskii functional method is utilized along with average dwell time, and linear matrix inequalities are formulated to derive the sufficient conditions. The residual signal is evaluated, and an adaptive threshold is computed for both modes of the switched system. Finally, a simulation example for a case study of boost converter and a numerical example with both abrupt and incipient faults are illustrated to prove the efficacy of the proposed method.

In this paper, a generalized sliding mode observer design method is proposed for the robust reconstruction of sensors and actuators faults in the presence of both unknown disturbances and uncertainties. For this purpose, the effect of uncertainty and disturbance on the system has been considered in generalized state-space form, and the LMI tool is combined with the concept of an equivalent output error injection method to reduce the effects of them on the reconstruction process. The upper bound of the disturbance and uncertainty are minimized in the design of the sliding motion so that the reconstruction of the faults will be minimized. The design method is applied for actuator faults in the generalized state-space form, and then with some suitable filtering, the method extends as sensors and actuators coincidentally faults. Since in the proposed approach, the state trajectories do not leave the sliding manifold even in simultaneous sensors and actuators faults, then the faults are rec... [more]

The paper concerns a significant problem in the diagnostics of industrial processes, which is the need to achieve high fault distinguishability. High distinguishability results in the generation of precise diagnoses that enable making appropriate security decisions. In the known approaches, the efforts to obtain high distinguishability are focused on the selection of an appropriate set of generated residuals. The paper presents a new method of diagnostic reasoning using the notation of faults/diagnostic signals’ relations in the form of a Fault Isolation System (FIS), which enables the use of multivalent diagnostic signals. In addition, the proposed method uses knowledge (usually incomplete) about the sequence of symptoms. Reasoning was carried out on the basis of simple, physically possible signatures, resulting from the FIS. Assumptions and a diagnostic algorithm are given. The reasoning algorithm works in a step-by-step manner, after observing further symptoms. In each reasoning ste... [more]

This paper presents a latent-space dynamic neural network (LSDNN) model for the multi-step-ahead prediction and fault detection of a geothermal power plant’s operation. The model was trained to learn the dynamics of the power generation process from multivariate time-series data and the effects of exogenous variables, such as control adjustment and ambient temperature. In the LSDNN model, an encoder−decoder architecture was designed to capture cross-correlation among different measured variables. In addition, a latent space dynamic structure was proposed to propagate the dynamics in the latent space to enable prediction. The prediction power of the LSDNN was utilized for monitoring a geothermal power plant and detecting abnormal events. The model was integrated with principal component analysis (PCA)-based process monitoring techniques to develop a fault-detection procedure. The performance of the proposed LSDNN model and fault detection approach was demonstrated using field data colle... [more]

The relationship between wind speed and the power produced by a wind turbine is expressed by its power curve. Power curves are commonly used to monitor the production performance of a wind turbine by asset managers to ensure optimal production. They can also be used as a tool to detect faults occurring on a wind turbine when the fault causes a decrease in performance. However, the wide dispersion of data generally observed around the reference power curve limits the detection performance of power curve-based techniques. Fault indicators, such as residuals, which measure the difference between the actual power produced and the expected power, are largely affected by this dispersion. To increase the detection performance of power-based fault detection methods, a hybrid solution of mono-multi-turbine residual generation is proposed in this paper to reduce the influence of the power curve dispersion. A new simulation framework, modeling the effect of wind nature (turbulent/laminar) on the... [more]

A new method for detecting demagnetization faults in axial flux permanent magnet synchronous wind generators is presented in this study. Demagnetization faults occur in the case of total or partial loss of the magnetic properties of one or more permanent magnets of the machine. Fault signatures appearing in the current or voltage signal due to a demagnetization fault can often be confused with those produced by eccentricity faults, making the discrimination between the two types of faults difficult. The proposed methodology is based on the analysis of the instant power spectrum of the generator, combined with an estimator to derive the permanent magnet flux, based on the machine equations. Short-Time Fourier Transform is proposed as the means for spectrum analysis to ensure performance during variations of the generator speed. Results derived from the experimental tests are presented, which show that the proposed methodology is capable of detecting demagnetization faults and distinguis... [more]

Offshore wind turbine drive train technology is evolving as developers increase size, aim to maximise availability and adapt to changing electricity grid requirements. This work first of all explores offshore technology market trends observed in Europe, providing a comprehensive overview of installed and planned capacity, showing a clear shift from smaller high-speed geared machines to larger direct-drive machines. To examine the implications of this shift in technology on reliability, stop rates for direct-drive and gear-driven turbines are compared between 39 farms across Europe and South America. This showed several key similarities between configurations, with the electrical system contributing to largest amount of turbine downtime in either case. When considering overall downtime across all components, the direct-drive machine had the highest value, which could be mainly attributed to comparatively higher downtime associated with the electrical, generator and control systems. For... [more]

This paper proposes an Intelligent Monitoring System (IMS) for Photovoltaic (PV) systems using affordable and cost-efficient hardware and also lightweight software that is capable of being easily implemented in different locations and having the capability to be installed in different types of PV power plants. IMS uses the Internet of Things (IoT) platform for handling data as well as Interoperability and Communication among the devices and components in the IMS. Moreover, IMS includes a personal cloud server for computing and storing the acquired data of PV systems. The IMS also consists of a web monitor system via some open-source and lightweight software that displays the information to multiple users. The IMS uses deep ensemble models for fault detection and power prediction in PV systems. A remarkable ability of the IMS is the prediction of the output power of the PV system to increase energy yield and identify malfunctions in PV plants. To this end, a long short-term memory (LSTM... [more]

With the rising popularity of unmanned aerial vehicles (UAVs) and increasing variety of their applications, the task of providing reliable and robust control systems becomes significant. An active fault-tolerant control (FTC) scheme requires an effective fault detection and isolation (FDI) algorithm to provide information about the fault’s occurrence and its location. This work aims to present a prototype of a diagnostic system intended to recognize and identify broken blades of rotary wing UAVs. The solution is based on an analysis of acoustic emission recorded with an onboard microphone array paired with a lightweight yet powerful single-board computer. The standalone hardware of the FDI system was utilized to collect a wide and publicly available dataset of recordings in real-world experiments. The detection algorithm itself is a data-driven approach that makes use of an artificial neural network to classify characteristic features of acoustic signals. Fault signature is based on Me... [more]

Fault detection and isolation are important tasks to improve the protection system of low voltage direct current (LVDC) networks. Nowadays, there are challenges related to the protection strategies in the LVDC systems. In this paper, two proposed methods for fault detection and isolation of the faulty segment through the line and bus voltage measurement were discussed. The impacts of grid fault current and the characteristics of protective devices under pre-fault normal, under-fault, and post-fault conditions were also discussed. It was found that within a short time after fault occurrence in the network, this fault was quickly detected and the faulty line segment was efficiently isolated from the grid, where this grid was restored to its normal operating conditions. For analysing the fault occurrence and its isolation, two algorithms with their corresponding MATLAB/SIMULINK platforms were developed. The findings of this paper showed that the proposed methods would be used for microgri... [more]

Fault detection is an important and demanding problem in industry. Recently, many researchers have addressed the use of deep learning architectures for fault detection applications such as an autoencoder. Traditional methods based on an autoencoder usually complete fault detection by comparing reconstruction errors, and ignore a lot of useful information about the distribution of latent variables. To deal with this problem, this paper proposes a novel unsupervised fault detection method named one-dimension convolutional adversarial autoencoder (1DAAE), which introduces two new ideas: one-dimension convolution layers for the encoder to obtain better features and the adversarial thought to impose the latent variable z to cluster into a prior distribution. The proposed method not only has powerful feature representation ability than the traditional autoencoder, but has also enhanced the discrimination ability by imposing a prior distribution of the latent variables to cluster. Then, two a... [more]

This paper introduces an enhancement of the protection and operation of the Future Renewable Electric Energy Delivery and Management (FREEDM) system. It uses the solid-state transformers to connect the residential A.C. and D.C. microgrids to the distribution system and fault isolation devices for faulty line isolation. In this paper, a current differential protection scheme has been proposed to detect faults in the FREEDM-based microgrid network. This method is based on the current measurement at the two-line terminals using phasor measurement units to ensure data synchronization and minimize the measuring error. Also, a communication scheme that is based on the Internet of things technology and Wi-Fi is constructed for data monitoring and interlinking between the relays, transducers, and the fault isolation devices in the two-terminals lines. A hypothetical FREEDM system has been used for the verification and testing of the proposed method. Different fault types at different locations... [more]

This article presents a method for quantification of methanol and ethanol integrated in the same gas-chromatographic run with a quantification of gases dissolved in mineral oil, making it an integrated tool in transformer diagnostics. The results of aging experiments at 120 °C and 60 °C of Kraft paper, copper, barrier, and pressboard immersed in mineral oil, as well as the aging of thermal upgrade paper in mineral and natural ester oil at 140 °C are presented, in order to investigate correlations between different aging markers and to evaluate their partitioning between oil and cellulose at defined conditions. The results of partitioning experiments at 60 °C showed that re-absorption of methanol from oil to the cellulose materials is faster than the re-absorption of furans. This means that methanol is a paper-degradation marker that can be used in diagnostics over shorter equilibrium times and for the detection of developing faults at broader temperature ranges. Furthermore, a statisti... [more]

In the next decade, further digitalisation of the entire wind energy project lifecycle is expected to be a major driver for reducing project costs and risks. In this paper, a literature review on the challenges related to implementation of digitalisation in the wind energy industry is first carried out, showing that there is a strong need for new solutions that enable co-innovation within and between organisations. Therefore, a new collaboration method based on a digital ecosystem is developed and demonstrated. The method is centred around specific “challenges”, which are defined by “challenge providers” within a topical “space” and made available to participants via a digital platform. The data required in order to solve a particular “challenge” are provided by the “challenge providers” under the confidentiality conditions they specify. The method is demonstrated via a case study, the EDP Wind Turbine Fault Detection Challenge. Six submitted solutions using diverse approaches are eval... [more]

Energy consumption in buildings is a significant cost to the building’s operation. As faults are introduced to the system, building energy consumption may increase and may cause a loss in occupant productivity due to poor thermal comfort. Research towards automated fault detection and diagnostics has accelerated in recent history. Rule-based methods have been developed for decades to great success, but recent advances in computing power have opened new doors for more complex processing techniques which could be used for more accurate results. Popular machine learning algorithms may often be applied in both unsupervised and supervised contexts, for both classification and regression outputs. Significant research has been performed in all permutations of these divisions using algorithms such as support vector machines, neural networks, Bayesian networks, and a variety of clustering techniques. An evaluation of the remaining obstacles towards widespread adoption of these algorithms, in bo... [more]

Integrating inverter-based generators in power systems introduces several challenges to conventional protection relays. The fault characteristics of these generators depend on the inverters’ control strategy, which matters in the detection and classification of the fault. This paper presents a comprehensive machine-learning-based approach for detecting and classifying faults in transmission lines connected to inverter-based generators. A two-layer classification approach was considered: fault detection and fault type classification. The faults were comprised of different types at several line locations and variable fault impedance. The features from instantaneous three-phase current and voltages and calculated swing-center voltage (SCV) were extracted in time, frequency, and time−frequency domains. A photovoltaic (PV) and a Doubly-Fed Induction Generator (DFIG) wind farm plant were the considered renewable resources. The unbalanced data problem was investigated and mitigated using the... [more]