Microgrids (MGs) interest is growing very fast due to the environment urgency and their capability to integrate renewable energy in a flexible way. In particular, islanded MGs in which distributed energy resources (DERs) are connected to the infrastructure with power electronic converters have attracted the interest of many researchers of both academia and industry because management, control and protection of such systems is quite different from the case of traditional networks. According to their operation mode, MGs that power electronic converters can be divided into grid-forming, grid-feeding and grid-supporting inverters. In particular, grid forming inverters are asked to impose voltage and frequency in the MG. This paper aims to propose a model predictive control (MPC) based approach for grid-forming inverters in an islanded MG. The MPC strategy is implemented because of its capability to define the optimal control actions that contemporarily track the desired reference signals a... [more]

This research paper presents a model of predictive control with a modulator for the inverter linked to the electrical grid, using the stationary reference frame and operating under grid distorted voltage. The stationary reference frame model for the system is obtained in its fundamental frequency and then the model predictive technique is implemented, which predicts the system actions using the obtained system model without the need of any other harmonic consideration. The controller calculates the voltage vector of the inverter through the minimization of the cost function. Thus, the proposal demonstrates, through experiments, its positive results regarding the low impact of the distorted voltage in the grid current without using any harmonic consideration on the model. Experimental results and comparisons carried out endorse the proposal of this work.

The droop control scheme based on Q − ω and P − V characteristics is conventionally employed to share the load power among sources in an islanded low-voltage microgrid with resistive line impedances. However, it suffers from poor active power sharing, and is vulnerable to sustained deviations in frequency and voltage. Therefore, accurate power sharing and maintaining the frequency and voltage in the desired ranges are challenging. This paper proposes a novel microgrid control strategy to address these issues. The proposed strategy consists of a virtual flux droop and a model predictive control, in which the virtual flux is the time integral of the voltage. Firstly, the novel virtual flux droop control is proposed to accurately control the power sharing among DGs. Then, the model predictive flux control is employed to generate the appropriate switching signals. The proposed strategy is simple without needing multiple feedback control loops. In addition, pulse width modulation is not req... [more]

Finite Control-Set Model Predictive Control (FCS-MPC) appears as an interesting alternative to regulate multiphase electric drives, thanks to inherent advantages such as its capability to include new restrictions and fast-transient response. Nevertheless, in industrial applications, FCS-MPC is typically discarded to control multiphase motors because the absence of a modulation stage produces a high harmonic content. In this regard, multi-vectorial approaches are an innovative solution to improve the electric drive performance taking advantage of the implicit modulator flexibility of Model Predictive Control (MPC) strategies. This work proposes the definition of a new multi-vectorial set of control actions formed by a couple of adjacent large voltage vectors and a null voltage vector with an adaptative application ratio. The combination of two large voltage vectors provides minimum x-y current injection whereas the application of a null voltage vector reduces the active voltage producti... [more]

This paper presents the improvements of the hosting capacity of photovoltaics (PVs) and electric vehicles (EVs) in a stand-alone microgrid (MG) with an energy storage system (ESS) by consider-ing a model predictive control (MPC) based energy management system. The system is configured as an MG, including PVs, an ESS, a diesel generator (DG), and several loads with EVs. The DG is controlled to operate at rated power and the MPC algorithm is used in a stand-alone MG, which supplies the energy demanded for several loads with EVs. The hosting capacity of the load in-cluding the EV and PVs can be expanded through the ESS to the terminal node of the microgrid. In this case, the PVs and the load can be connected in excess of the capacity of the diesel genera-tor, and each bus in the feeder complies with the voltage range required by the grid. The effec-tiveness of the proposed algorithm to resolve the hosting capacity is demonstrated by numerical simulations.

The increasing share of distributed renewable energy resources (DER) in the grid entails a paradigm shift in energy system operation demanding more flexibility on the prosumer side. In this work we show an implementation of linear economic model predictive control (MPC) for flexible microgrid dispatch based on time-variable electricity prices. We focus on small and medium enterprises (SME) where information and communications technology (ICT) is available on an industrial level. Our implementation uses field devices and is evaluated in a hardware-in-the-loop (HiL) test bench to achieve high technological maturity. We use available forecasting techniques for power demand and renewable energy generation and evaluate their influence on energy system operation compared to optimal operation under perfect knowledge of the future and compared to a status-quo operation strategy without control. The evaluation scenarios are based on an extensive electricity price analysis to increase representa... [more]

The ESS is considered as an effective tool for enhancing the flexibility and controllability of a wind farm, and the optimal control scheme of a wind farm with distributed ESSs is vital to the stable operation of wind power generation. In this paper, a coordinated active and reactive power control strategy based on model predictive control (MPC) is proposed for doubly fed induction generator (DFIG)-based wind farm (WF) with distributed energy storage systems (ESSs). The proposed control scheme coordinates the active and reactive power output among DFIG wind turbines (WTs), grid-side converters (GSCs), and distributed ESSs inside the WF, and the aim is to decrease fatigue loads of WTs, make the WT terminal voltage inside the extent practicable, and take the WF economic operation into consideration. Moreover, the best reactive power references of DFIG stator and GSC are produced independently based on their dynamics. At last, the control scheme generates optimal power references for all... [more]

This paper proposes a novel model predictive current control scheme for two-stage matrix converter. The switching frequency is kept constant by fixing the switching instant. The control strategy achieves to control source reactive power in the input side and output currents in the output side. In addition, the advantage of the proposed strategy compared with conventional model predictive control is firstly proved using the principle of vector synthesis and the law of sines in the vector distribution area. Moreover, a zero-current switching sequence is proposed and implemented to insure zero-current switching operations and reduce the switching losses. Furthermore, in order to suppress the input filter resonance, which is easier to be inspired by the model predictive control, compared with traditional control strategies, an innovative active damping technique is proposed and implemented. Finally, both simulation and experiment are implemented to verify the performance of the proposed st... [more]

This paper proposes a vector modulation-based model predictive current control strategy for a two-stage matrix converter. The switching frequency is kept constant by fixing the switching instantly. The control scheme controls the source reactive power on the input side and output currents on the output side. Besides, the advantage of the proposed strategy compared with conventional model predictive control is firstly proved using the principle of vector synthesis and the law of sines in the vector distribution area. Moreover, to ensure zero-current switching operations and reduce the switching losses, an optimal switching sequence is proposed and implemented. Furthermore, considering that the input filter resonance is easier to be inspired by the model predictive control, compared with conventional linear control strategies, an innovative active damping technique is proposed to suppress the input filter resonance. To assess the performance of the proposed method, simulation and experim... [more]

To enhance the energy performance of a central air-conditioning system, an effective control method for the chilled water system is always essential. However, it is a real challenge to distribute exact cooling energy to multiple terminal units in different floors via a complex chilled water network. To mitigate hydraulic imbalance in a complex chilled water system, many throttle valves and variable-speed pumps are installed, which are usually regulated by PID-based controllers. Due to the severe hydraulic coupling among the valves and pumps, the hydraulic oscillation phenomena often occur while using those feedback-based controllers. Based on a data-calibrated water distribution model which can accurately predict the hydraulic behaviors of a chilled water system, a new Model Predictive Control (MPC) method is proposed in this study. The proposed method is validated by a real-life chilled water system in a 22-floor hotel. By the proposed method, the valves and pumps can be regulated saf... [more]

This paper introduces a Model Predictive Control (MPC) strategy for the optimal energy management of a district whose buildings are equipped with vertically placed Building Integrated Photovoltaic (BIPV) systems and Battery Energy Storage Systems (BESS). The vertically placed BIPV systems are able to cover larger areas of buildings’ surfaces, as compared with conventional rooftop PV systems, and reach their peak of production during winter and spring, which renders them suitable for energy harvesting especially in urban areas. Driven by both these relative advantages, the proposed strategy aims to maximize the district’s autonomy from the external grid, which is achieved through the cooperation of interactive buildings. Therefore, the major contribution of this study is the management and optimal cooperation of a group of buildings, each of which is equipped with its own system of vertical BIPV panels and BESS, carried out by an MPC strategy. The proposed control scheme consists of thr... [more]

The sustainable agriculture cultivation in greenhouses is constantly evolving thanks to new technologies and methodologies able to improve the crop yield and to solve the common concerns which occur in protected environments. In this paper, an MPC-based control system has been realized in order to control the indoor air temperature in a high efficiency greenhouse. The main objective is to determine the optimal control signals related to the water mass flow rate supplied by a heat pump. The MPC model allows a predefined temperature profile to be tracked with an energy saving approach. The MPC has been implemented as a multiobjective optimization model that takes into account the dynamic behavior of the greenhouse in terms of energy and mass balances. The energy supply is provided by a ground coupled heat pump (GCHP) and by the solar radiation while the energy losses related to heat transfers across the glazed envelope. The proposed MPC method was applied in a smart innovative greenhouse... [more]

An electric vehicle (EV) usually has two main power converters, namely one for the motor drive system and another for the battery-charging system. Considering the similarities between both converters, a new unified power converter for motor drive and battery charging of EVs is propounded in this paper. By using a single unified power converter, the cost, volume, and weight of the power electronics are reduced, thus also making possible a reduction in the final price of the EV. Moreover, the proposed unified power converter has the capability of bidirectional power flow. During operation in traction mode, the unified power converter controls motor driving and regenerative braking. Additionally, during operation in battery-charging mode, with the EV plugged into the electrical power grid, the unified power converter controls the power flow for slow or fast battery charging (grid-to-vehicle (G2V) mode), or for discharging of the batteries (vehicle-to-grid (V2G) mode). Specifically, this p... [more]

The multi-modular converter (MMC) technology is becoming the preferred option for the increased deployment of variable renewable energy sources (RES) into electrical power systems. MMC is known for its reliability and modularity. The fast adjustment of the MMC’s active/reactive powers, within a few milliseconds, constitutes a major research challenge. The solution to this challenge will allow accelerated integration of RES, without creating undesirable stability issues in the future power system. This paper presents a variant of model predictive control (MPC) for the grid-connected MMC. MPC is defined using a Laguerre function to reduce the computational burden. This is achieved by reducing the number of parameters of the MMC cost function. The feasibility and effectiveness of the proposed MPC is verified in the real-time digital simulations. Additionally, in this paper, a comparison between an accurate mathematical and real-time simulation (RSCAD) model of an MMC is given. The compari... [more]

This paper presents control relationships between the low voltage distribution grid and flexibilities in a peer-to-peer local energy community using a stratified control strategy. With the increase in a diverse set of distributed energy resources and the next generation of loads such as electric storage, vehicles and heat pumps, it is paramount to maintain them optimally to guarantee grid security and supply continuity. Local energy communities are being introduced and gaining traction in recent years to drive the local production, distribution, consumption and trading of energy. The control scheme presented in this paper involves a stratified controller with grid and flexibility layers. The grid controller consists of a three-phase unbalanced optimal power flow using the holomorphic embedding load flow method wrapped around a genetic algorithm and various flexibility controllers, using three-phase unbalanced model predictive control. The control scheme generates active and reactive po... [more]

The operation of single-phase Modular Multilevel Converter (MMC) is analyzed in the paper. A mathematical model of the converter is developed and described, based on which the structure and selection of parameters for Classical Control and Optimal Switching State Model Predictive Control (OSS-MPC) are defined. Additionally, the procedure for the determination of circuit parameters, such as submodule capacitance and arm inductance, is described and carried out. The listed control methods are designed and evaluated in Virtual Hardware-in-the-Loop together with single-phase MMC power circuit, regarding three control objectives: AC current control, voltage balancing control and circulating current control. Control methods are evaluated for both steady-state and transient performance and compared based on nine criteria: AC current reference tracking, THD of AC current and voltage, submodule capacitor voltage balancing, total submodule voltage control, circulating current magnitude and THD,... [more]

Model predictive control (MPC) is widely used for microgrids or unit commitment due to its ability to respect the forecasts of loads and generation of renewable energies. However, while there are lots of approaches to accounting for uncertainties in these forecasts, their impact is rarely analyzed systematically. Here, we use a simplified linear state space model of a commercial building including a photovoltaic (PV) plant and real-world data from a 30 day period in 2020. PV predictions are derived from weather forecasts and industry peak pricing is assumed. The effect of prediction accuracy on the resulting cost is evaluated by multiple simulations with different prediction errors and initial conditions. Analysis shows a mainly linear correlation, while the exact shape depends on the treatment of predictions at the current time step. Furthermore, despite a time horizon of 24h, only the prediction accuracy of the first 75min was relevant for the presented setting.

Uninterruptible Power Supplies (UPS) have been demonstrated to be the key technology in feeding either single- and three-phase loads in a wide range of critical applications, such as high-tier datacenters and medical facilities. To increase the overall system power capacity and resilience, UPS systems are usually connected in parallel. When UPS systems are parallel connected, a circulating current can rise, inhibiting correct system operation. Moreover, having a controlled load power distribution is another fundamental requirement in paralleled UPS systems. However, strategies to ensure these two topics have not been explored to date for UPS systems with a load-side neutral connection. This paper proposes an innovative Finite Control Set Model Predictive Control (FCS-MPC) strategy that ensures circulating current elimination and controlled load power distribution for paralleled UPS systems that use an additional inverter leg for load neutral point connection. Additionally, a system top... [more]

Lithium-ion (Li-ion) batteries play a substantial role in portable consumer electronics, electric vehicles and large power energy storage systems. For Li-ion batteries, developing an optimal charging algorithm that simultaneously takes rises in charging time and charging temperature into account is essential. In this paper, a model predictive control-based charging algorithm is proposed. This study uses the Thevenin equivalent circuit battery and transforms it into the state-space equation to develop the model predictive controller. The usage of such models in the battery optimal control context has an edge due to its low computational cost, enabling the realization of the proposed technique using a low-cost Digital Signal Processor (DSP). Compared with the widely employed constant current-constant voltage charging method, the proposed charging technique can improve the charging time and the average temperature by 3.25% and 0.76%, respectively.

Fault-tolerance is critical in power electronics, especially in Uninterruptible Power Supplies, given their role in protecting critical loads. Hence, it is crucial to develop fault-tolerant techniques to improve the resilience of these systems. This paper proposes a non-redundant fault-tolerant double conversion uninterruptible power supply based on 3-level converters. The proposed solution can correct open-circuit faults in all semiconductors (IGBTs and diodes) of all converters of the system (including the DC-DC converter), ensuring full-rated post-fault operation. This technique leverages the versatility of Finite-Control-Set Model Predictive Control to implement highly specific fault correction. This type of control enables a conditional exclusion of the switching states affected by each fault, allowing the converter to avoid these states when the fault compromises their output but still use them in all other conditions. Three main types of corrective actions are used: predictive c... [more]

In this paper, a real-time capable reference governor superordinate model predictive controller (RG-MPC) is developed for fuel cell (FC) control suitable for automotive application. The RG-MPC provides reference trajectories for the subordinate proportional-integral (PI) controllers, which act directly on the FC system. Antiwindup and decoupling schemes, which are common problems in multivariable PI control, are unnecessary, given that the RG-MPC can inherently consider constraints and multivariable systems. The PI dynamics are incorporated into the prediction model used for control, ensuring the feasibility of the provided references for the PI controllers. The successive linearization technique is used in the RG-MPC to cope with the model’s nonlinear nature in real-time. The concept has been illustrated in a simulation scenario featuring efficient and safe power control of an FC stack in automotive application using real driving data obtained from an in-house-built FC vehicle. This w... [more]

Faced with the increasingly serious energy crisis and environmental pollution problems, traditional internal combustion engine vehicles are receiving more and more resistance, which has rapidly promoted the development of new energy electric vehicles. Permanent magnet synchronous motors are widely used in new energy electric vehicles and in other fields because of their simple structure, light weight, small size, and high power density. With the continuous advancement of production technology, the requirements of accuracy, rapidity, and stability in permanent magnet synchronous motor systems have gradually increased. Among many advanced control technologies, this paper proposes an optimized model predictive torque control strategy based on voltage vector expansion. This strategy involves the construction of a reference stator flux linkage vector based on the analytical relationship between electromagnetic torque, reference stator flux linkage amplitude, and rotor flux linkage and the t... [more]

A gas-lifted system in a mature oil well can experience casing-heading instability, which reduces the mean oil production and it is not healthy for the downstream equipment. This instability was removed by implementing a terminal equality-constrained nonlinear model predictive control (NMPC) having input targets with control zones in the system. The input-dependent stability behaviour of the gas-lifted system was visualised through the bifurcation diagram and the step responses of the linearised model at various operating points. The controller was then presented. Then, the close-loop feasibility, as well as the convergence, were discussed. The controller stabilised the undisturbed gas-lifted system, improving production by 5.63% compared to the open-loop operation when the system was in casing-heading instability. For the two input case, the steady-state production, aided by the high-input target, reached 12.25 kg/s, which was far more than 9.57 kg/s for the one input case. This contr... [more]

An optimal dispatching strategy for a multi-source complementary power generation system taking source−load uncertainty into account is proposed, in order to address the effects of large-scale intermittent renewable energy consumption and power load instability on power grid dispatching. The uncertainty problem is first converted into common situations for study, such as load power forecasting and solar and wind power. The backward scenario reduction and Latin hypercube sampling techniques are used to create these common situations. Based on this, a multi-timescale coordinated optimum scheduling control method for a multi-source complementary power generation system taking the demand response into account is presented, and the optimal operation of a wind−PV−thermal-pumped storage hybrid system is examined. The time-of-use power price optimizes the electrical load in the day-ahead pricing mode, and the two types of demand response loads are selected in the day-ahead scheduling. Second,... [more]

Weather conditions have significant impacts on the solar concentration processes of the heliostat fields in solar tower power plants. The cloud shadow movements may cause varying solar irradiance levels received by each heliostat. Hence, fixed aiming strategies may not be able to guarantee the solar concentrating performance. Dynamic aiming strategies are able to optimize the aiming strategy based on real-time shadowing conditions and short-term forecast, and, therefore, provide much more robust solar concentration performance compared to fixed strategies. In this work, a model predictive control approach for s heliostat field power regulatory aiming strategy was proposed to regulate the total concentrated solar flux on the central receiver. The model predictive control method obtains the aiming strategy, leveraging real-time and forecast shadowing conditions based on the solar concentration model of the heliostat field. The allowable flux density of the receiver and the aiming angle a... [more]