Moisture content is the most relevant quality parameter for wood fuels. Effective and fast determination of moisture of incoming feedstock is essential in the management of bioenergy facilities. The availability of fast and reliable moisture meters based on innovative technologies simplifies this task. However, in Mediterranean conditions the inherent variability of wood fuels calls for a careful sampling strategy if representative results are required while facing acceptable analytic costs. The present study is aimed at measuring the fuel heterogeneity and defining accordingly the appropriate number of samples to be analyzed in order to get reliable moisture-content results. A total of 70 truckloads (about 2270 t of woodchips) were sampled during commercial operations in two different seasons. Five samples were collected from each load and measured with standard method and magnetic resonance gauge. Results show that the variability of moisture content is influenced by mixing of specie... [more]

Gasification of organic matter under the conditions of supercritical water (T > 374 °C, p > 221 bar) is an allothermal, continuous flow process suitable to convert materials with high moisture content (<20 wt.% dry matter) into a combustible gas. The gasification of organic matter with water as a solvent offers several benefits, particularly the omission of an energy-intensive drying process. The reactions are fast, and mean residence times inside the reactor are consequently low (less than 5 min). However, there are still various challenges to be met. The combination of high temperature and pressure and the low concentration of organic matter require a robust process design. Additionally, the low value of the feed and the product predestinate the process for decentralized applications, which is a challenge for the economics of an application. The present contribution summarizes the experience gained during more than 10 years of operation of the first dedicated pilot plant for super... [more]

Orange peel, which is a by-product of oranges, contains carbohydrates that can be converted into sugars and used in the fermentation process. In this study, the thermal alkaline pretreatment process was chosen because of its simplicity and lesser reaction time. In addition, the reaction factors were optimized using response surface methodology. The determined optimal conditions were as follows: 60.1 g/L orange peels loading, 3% KOH and 30 min. Under the optimal conditions, glucan content (GC) and enzymatic digestibility (ED) were found to be 32.8% and 87.8%, respectively. Enzymatic hydrolysis was performed with pretreated and non-pretreated orange peels using three types of enzyme complex (cellulase, cellobiase and xylanase). The minimum concentrations of enzyme complex required to obtain maximum ED were 30 FPU (filter paper unit), 15 CBU (cellobiase unit), and 30 XNU (xylanase unit) based on 1 g-biomass. Additionally, ED of the treated group was approximately 3.7-fold higher than that... [more]

The valorization of residual biomass plays today a decisive role in the concept of “circular economy”, according to which each waste material must be reused to its maximum extent. The collection and energy valorization at the local level of biomass from forest management practices and wildfire prevention cutting can be settled in protected areas to contribute to local decarbonization, by removing power generation from fossil fuels. Despite the evident advantages of bioenergy systems, several problems still hinder their diffusion, such as the need to assure their reliability by extending the operating range with materials of different origin. The Italian project “INNOVARE—Innovative plants for distributed poly-generation by residual biomass”, funded by the Italian Ministry of Economic Development (MISE), has the main scope of improving micro-cogeneration technologies fueled by biomass. A micro-combined heat and power (mCHP) unit was chosen as a case study to discuss pros and cons of bio... [more]

Combined heat and power systems dedicated to micro-scale applications are currently increasing in popularity. The use of such systems is beneficial from the standpoint of increasing the usage of renewable energy, increasing energy efficiency and reducing CO2 emissions into the atmosphere. This paper shows two examples of prototypical micro-cogeneration systems powered by biomass. In the first, smaller one, electricity is generated in thermoelectric generators using heat from the wood-fired stove. The second one is equipped with a 100 kWt batch boiler and operates according to a modified Rankine cycle. The energy and ecological analysis were conducted and discussed, including selected aspects of heat and power generation and gaseous pollutant emission. Measurements were performed using a dedicated control and measurement station with a PLC controller. As was shown, thermoelectric generators operated respectively with the power of 22.5 We in the case of the air-cooled unit and 31.2 We in... [more]

The aim of this work is to investigate the fluidised bed gasification of several pure and blended feedstock prepared in the form of pellets: oak bark, two bark/wheat straw blends (85/15 and 50/50 wt%) and lignin residue remaining from bioethanol production. Gasification conditions were defined to be representative of dual fluidised bed ones (steam gasification at 850 °C, followed by air combustion of the char). The cold gas efficiency (77−81%), gas composition and tar content (0.9−2.3 g/kgdaf) are close for the gasification of bark and the two bark/wheat straw blends. For lignin residue, the cold gas efficiency is lower (71%), and the tar content is 9.1 g/kgdaf. The agglomeration propensity is much higher for lignin residue than for the other feedstock. This was put into evidence with in-bed temperature measurements at different levels, and confirmed with post-test size screening of the bed material particles. The 50/50 wt% bark/wheat straw blend seems to undergo defluidisation in comb... [more]

More than one billion people worldwide still lack access to electricity. Rural electrification via gasification has the potential to satisfy electricity access and demand. This study conducts an economic evaluation of rural electrification through gasification of biomass and municipal solid waste (MSW) using a 60 kW downdraft gasifier, developed at Oklahoma State University. The effects of feedstock cost, electricity selling price, feed-in-tariff, tipping fee, tax rate, and the output power are evaluated using major financial parameters: the net present value, internal rate of return, modified internal rate of return, simple payback period, and discounted payback period, and sensitivity analysis. Results show that the downdraft gasification power system offers a payback period of 7.7 years, while generating an internal rate of return, modified internal rate of return, and net present value of 10.9%, 7.7%, and $84,550, respectively. Results from a sensitivity analysis indicate that the... [more]

Raw syngas conditioning using molten salts was carried out in a fixed-bed reactor. The effects of the reaction conditions, including temperature, gas velocity, bubble diameter, molten salt static liquid heights, and inlet gas composition, on the composition of the syngas product and the properties of the spent molten salts were investigated. The molten salt absorbed CO2 in all of the experiments (at temperatures from 350 °C to 500 °C) and decreased its concentration down to 1%. The H2/CO increased from 0.94 to a maximum of 11.0, which may meet most of the synthetic process’ requirements. The temperature, gas velocity, and molten salt static liquid heights had significant effects on the H2 and CO concentrations in the gas product. Molten salt raw syngas conditioning can be a suitable follow-up procedure for gasification and pyrolysis.

Sugar beet is an extensive crop of great agronomic value with significant productive and economic returns and Ukraine’s sugar beet accounts for about 5.1% of the overall world production. Sugar beets and the by-products resulting from its manufacturing transformation are a significant renewable energy resource. A new high-quality performance prototype of a sugar beet top harvester, front mounted on a tractor, was built by the authors in Ukraine. The aim of this study is to evaluate the main performance parameters related to the operation of this new machine. Field tests were carried out linking the prototype to a wheel tractor, whilst suitable sensors measured the significant kinematic and dynamic parameters, allowing experimental data collection to assess the machine’s performance parameters. The entire technological process of harvesting and transporting the beet tops to the beet top storage unit required power ranging from 6.42 to 17.65 kW. At the topmost tested forward speed, the r... [more]

Biomass is gaining increased attention as a sustainable and low-cost hard carbon (HC) precursor. However, biomass properties are often unexplored and unrelated to HC performance. Herein, we used pine, beechwood, miscanthus, and wheat straw precursors to synthesize HCs at 1000 °C, 1200 °C and 1400 °C by a two-steps pyrolysis treatment. The final physicochemical and electrochemical properties of the HC evidenced dissimilar trends, mainly influenced by the precursor’s inorganic content, and less by the thermal treatment. Pine and beechwood HCs delivered the highest reversible capacity and coulombic efficiency (CE) at 1400 °C of about 300 mAh·g−1 and 80%, respectively. This performance can be attributed to the structure derived from the high carbon purity precursors. Miscanthus and wheat straw HC performance was strongly affected by the silicon, potassium, and calcium content in the biomasses, which promoted simultaneous detrimental phenomena of intrinsic activation, formation of a silicon... [more]

Biomass has been demonstrated as a capable source of energy to fulfill the increasing demand for clean energy sources which could last a long time. Replacing fossil fuels with biomass-based ones can potentially lead to a reduction of carbon emissions, which is the main target of the EU climate strategy. Based on RED II (revised Renewable Energy Directive 2018/2001/EU) and the European Green Deal, biomass is a promising energy source for achieving carbon neutrality in the future. However, the sustainable potential of biomass resources in the forthcoming decades is still a matter of question. This review aims at estimating the availability of biomass for energy reasons in the EU, and to evaluate its potential to meet the coal power plant capacity of the main lignite-producer countries, including Germany, Poland and Greece. Plants in line with the sustainability criteria of RED II have been selected for the preliminary estimations concerning their full conversion to the biomass power conc... [more]

The objective of this study is to assess the techno-economic potential of the proposed novel energy system, which allows for negative emissions of carbon dioxide (CO2). The analyzed system comprises four main subsystems: a biomass-fired combined heat and power plant integrated with a CO2 capture and compression unit, a CO2 transport pipeline, a CO2-enhanced geothermal system, and a supercritical CO2 Brayton power cycle. For the purpose of the comprehensive techno-economic assessment, the results for the reference biomass-fired combined heat and power plant without CO2 capture are also presented. Based on the proposed framework for energy and economic assessment, the energy efficiencies, the specific primary energy consumption of CO2 avoidance, the cost of CO2 avoidance, and negative CO2 emissions are evaluated based on the results of process simulations. In addition, an overview of the relevant elements of the whole system is provided, taking into account technological progress and tec... [more]

Biomass-fueled combined heat and power systems (CHPs) can potentially offer environmental benefits compared to conventional separate production technologies. This study presents the first environmental life cycle assessment (LCA) of a novel high-efficiency bio-based power (HBP) technology, which combines biomass gasification with a 199 kW solid oxide fuel cell (SOFC) to produce heat and electricity. The aim is to identify the main sources of environmental impacts and to assess the potential environmental performance compared to benchmark technologies. The use of various biomass fuels and alternative allocation methods were scrutinized. The LCA results reveal that most of the environmental impacts of the energy supplied with the HBP technology are caused by the production of the biomass fuel. This contribution is higher for pelletized than for chipped biomass. Overall, HBP technology shows better environmental performance than heat from natural gas and electricity from the German/Europe... [more]

The coal-producing territories in the world are facing the production of renewable energy in their thermal systems. The production of biocoal has emerged as one of the most promising thermo-energetic conversion technologies, intended as an alternative fuel to coal. The aim of this research is to assess how the model of biomass to biocoal conversion in mining areas is applied for thermal systems engineering. The Central Asturian Coal Basin (CACB; Spain) is the study area. The methodology used allows for the analysis of the resource as well as the thermo-energetic conversion and the management of the bioenergy throughout the different phases in a process of analytical hierarchy. This is carried out using a multiphase mathematical algorithm based on the availability of resources, the thermo-energetic conversion, and the energy management in the area of study. Based on the working conditions, this research highlights the potential of forest biomass as a raw material for biocoal production... [more]

Biomass is a solid fuel that can be used instead of coal to address the issue of greenhouse gases. Currently, biomass is used directly in combustion or via co-combustion in coal-fired power plants. However, its use is limited due to calorific value and ash problems. In this study, wet torrefaction (WT) was carried out at various temperatures (160 °C, 180 °C, and 200 °C) and the properties of the product were evaluated. In comparison to dry torrefaction, the ash contained in biomass was extracted by an acidic solution (i.e., acetic acid) from the overreaction of the biomass. From examining the ash content of the treated WT, it was confirmed that K2O of basic ash was mainly extracted. In particular, in the case of K2O, since the main cause of combustion problems are issues such as fouling and slagging, the removed WT can be stably combusted in the boiler. Finally, the combustion and emission behaviors were evaluated by TGA-DTG and TGA-FTIR. As the fuel-N was decreased in the WT proess, t... [more]

The importance of efficient utilization of biomass as renewable energy in terms of global warming and resource shortages are well known and documented. Biomass gasification is a promising power technology especially for decentralized energy systems. Decisive progress has been made in the gasification technologies development during the last decade. This paper deals with the control and optimization problems for an isolated microgrid combining the renewable energy sources (solar energy and biomass gasification) with a diesel power plant. The control problem of an isolated microgrid is formulated as a Markov decision process and we studied how reinforcement learning can be employed to address this problem to minimize the total system cost. The most economic microgrid configuration was found, and it uses biomass gasification units with an internal combustion engine operating both in single-fuel mode (producer gas) and in dual-fuel mode (diesel fuel and producer gas).

One of the ways used to reduce the emission of carbon dioxide and other harmful substances is the implementation of biomass co-firing processes with coals. Such processes have been implemented for many years throughout many countries of the world, and have included using existing high-power coal boilers. Despite numerous experiments, there are still no analyses in the literature allowing for their generalization. The purpose of this paper is to determine the generalized energy and ecological characteristics of dust steam boilers co-firing hard coal with biomass. The energy characteristics determined in the paper are the dependence of the gross energy efficiency of boilers on such decision parameters as their efficiency and the share of biomass chemical energy in fuel. However, the ecological characteristics are the dependence of emission streams: CO, NO, SO2, and dust on the same decision parameters. From a mathematical point of view, the characteristics are approximation functions bet... [more]

Bioenergy plays a major role as a renewable energy source in the European Union. Solid biomass is derived mainly as wood from forests and wood processing plants. Willow plantations set up on marginal lands can be a supplementary source of wood for energy generation. This study aimed to determine the energy value of yield and the thermophysical properties and elemental composition of the biomass of 7-year rotation willow harvested on marginal soil. Three varieties and three clones were cultivated in the Eko-Salix system on three marginal soils in northern Poland: riparian, alluvial soil, classified as heavy complete humic alluvial soil (Obory); organic, peat−muck soil formed from peat (Kocibórz); very heavy mineral clay soil (Leginy). Favourable conditions for obtaining high energy value biomass were at Kocibórz and Obory with a high groundwater level. The energy value of biomass at Leginy was lower than at Kocibórz and Obory (by 33% and 26%, respectively). The Ekotur variety had the si... [more]

This paper reports the performance of a spark ignition engine using gasoline blended with an upgraded bio-oil rich in aromatics and ethanol. This upgraded bio-oil was obtained using a two-step catalytic process. The first step comprised an in-situ catalytic pyrolysis process with CaO in order to obtain a more stable deoxygenated organic fraction, while the second consisted of a catalytic cracking of the vapours released using ZSM-5 zeolites to obtain an aromatics-rich fraction. To facilitate the mixture between bio-oil and gasoline, ethanol was added. The behaviour of a stationary spark ignition engine G12TFH (9600 W) was described in terms of fuel consumption and electrical efficiency. In addition, gaseous emissions and polycyclic aromatic hydrocarbon (PAH) concentrations were determined. Trial tests suggested that it is possible to work with a blend of gasoline, ethanol and bio-oil (90/8/2 vol%, herein named G90E8B2) showing similar fuel consumption than pure gasoline (G100) at the s... [more]

Solid recovered fuel (SRF) residue, which is leftovers from the SRF manufacturing process, usually is discarded in landfill because of its low heating value and high ash and moisture content. However, it could be used as a fuel after mechanical and biological treatment. Gasification experiments were conducted on treated SRF residue (TSRFR) to assess the viability of syngas production. Efforts were also made to improve the gasification performance by adding low-cost natural minerals such as dolomite and lime as bed material, and by blending with biomass waste. In the case of additive mineral tests, dolomite showed better performance compared to lime, and in the case of biomass blends, a 25 wt% pine sawdust blend with TSRFR showed the best performance. Finally, as an appropriate condition, a combined experiment was conducted at an equivalence ratio (ER) of 0.2 using a 25 wt% pine sawdust blend with TSRFR as a feedstock and dolomite as the bed material. The highest dry gas yield (1.81 Nm3... [more]

Short rotation woody crops (SRWC) like shrub willow are highly productive biomass resources of interest for energy and fuel applications. Hot water extraction (HWE) as an upgrading tool to enable the use of willow biomass in pellet applications has been proposed, and is of increasing interest. This study treats willow and mixes of willow and conventional mixed hardwood feedstock with HWE in a tumbling laboratory reactor to elucidate the effects of time, temperature, feedstock mixes, and other process considerations (water:biomass ratio, presteaming, counter-current processing) on mass removals and other extraction outcomes (e.g., sugar, acetate, and furan yields). Results demonstrated alignment of extraction outcomes with P-factor from 155 °C to 175 °C, with a good compromise of removed mass and co-product potential in the range from 575−800 P-factor. The preferred condition was chosen as 575 P-factor. HWE of mixes of willow and hardwood feedstocks showed a linear response of extractio... [more]

Two bimetallic Fe-Cu and Fe-Ca oxygen carriers were studied for chemical looping gasification (CLG) of biomass. The SEM results indicated that there was no obvious agglomeration on the bimetallic Fe-Cu oxygen carrier supported on Al2O3 and Fe-Ca oxygen carrier after five redox cycles while agglomeration occurred on CuO supported on Al2O3 due to the low melting point of CuO. The XRD results indicated the presence of copper-ferrite and calcium-ferrite phases in the bimetallic materials. The two bimetallic oxygen carriers can be re-oxidized with air to form a crystalline that is similar to the fresh materials. The Fe-Ca oxide became active at 360 °C which was lower than 380 °C for the Fe-Cu oxygen carrier. The high thermal stability and redox reactivity of bimetallic Fe-Cu and Fe-Ca oxygen carriers make the bimetallic oxygen carriers more suitable for recycling during CLG. The method for preparing Fe-Cu oxygen carriers had no significant impact on biomass conversion efficiency but had sig... [more]

Microalgae can be a future source of biomass with a wide range of applications, including its use to solve current environmental issues. One of the main variables for microalgal cultivation is the light supply: (i) its intensity that often does not present a uniform spatial distribution inside the culture; (ii) photoperiod; and (iii) spectrum. Therefore, this study aims to evaluate the growth of the microalgae Chlorella vulgaris in a tubular photobioreactor with compound parabolic collectors (CPCs) under outdoor conditions. The effect of ultraviolet and visible radiation on biomass productivity and nutrients (nitrogen and phosphorus) uptake was assessed. The maximum biomass productivity was (5 ± 1) × 10−3 g·L−1·h−1, and the specific growth rates ranged from (1.1 ± 0.3) × 10−2 to (2.0 ± 0.6) × 10−2 h−1. Regarding nutrient uptake, initial removal rates of (0.9 ± 0.4) mg N·L−1·h−1 for nitrogen and (0.17 ± 0.04) mg P·L−1·h−1 for phosphorus were reached. These values increased with visible... [more]

Organic Rankine Cycle (ORC) turbogenerators are a well-established technology to recover from medium to ultra-low grade heat and generate electricity, or heat and work as cogenerative units. High firmness, good reliability and acceptable efficiency guarantee to ORCs a large range of applications: from waste heat recovery of industrial processes to the enhancement of heat generated by renewable resources like biomass, solar or geothermal. ORC unit coupled with biomass boiler is one of the most adopted arrangements. However, despite biomass renewability, it is mandatory to evaluate the environmental impact of systems composed by boilers and ORCs taking into account the entire life cycle. To this purpose, the authors perform a life cycle assessment of a commercially available 150 kW cogenerative ORC unit coupled with a biomass boiler to assess the global environmental performance. The system is modelled in SimaPro using different approaches. Results show that the most impacting processes... [more]

For biomass compaction, it is important to determine all aspects of the process that will affect the quality of pellets and briquettes. The low bulk density of biomass leads to many problems in transportation and storage, necessitating the use of a compaction process to ensure a solid density of at least 1000 kg·m−3 and bulk density of at least 600 kg·m−3. These parameters should be achieved at a relatively low compaction pressure that can be achieved through the proper preparation of the raw material. As the compaction process includes a drying stage, the aim of this work is to determine the influence of the drying temperature of pine biomass in the range of 60−140 °C on the compaction process. To determine whether this effect is compensated by the moisture, compaction was carried out on the material in a dry state and on the materials with moisture contents of 5% and 10% and for compacting pressures in the 130.8−457.8 MPa range. It was shown that drying temperature affects the specif... [more]