This work addresses the internalization of externalities in energy decision making and in generation expansion planning (GEP). Although the linkage between externalities and energy is well recognized, the issue of the internalization in GEP models and from a sustainability perspective is still far from being fully explored. A critical literature review is presented, including scientific articles published in the period from 2011 to 2021 and selected from scientific databases according to a set of pre-defined keywords. The literature is vast and quite heterogeneous in the models and methods used to deal with these externalities, and therefore a categorization of these studies was attempted. This categorization was based on the methods used, the geographical scope, the externalities included in the planning model and the strategies for their inclusion. As a result, it was possible to perceive that most studies tend to focus on the internalization of externalities related to CO2 and equiv... [more]

This article investigates the impact of fiscal and financial incentives for energy efficiency labels on eco-friendly houses (houses with high energy efficiency certificates, such as A+, A, B, and B−) in 18 municipalities in the Lisbon metropolitan region during the period 2014−2020. The empirical results indicate that the variables of fiscal incentive policies for energy efficiency labels, income per capita, credit agreements for the purchase or construction of a house, and the number of completed dwellings in new constructions for family housing encourage eco-friendly houses. In contrast, the variable number of completed reconstructions per 100 completed new constructions has a negative impact. Although this study is constrained by data limitations resulting from the short period under analysis and the moderate number of municipalities available, it advances the discussions around energy efficiency in residential properties in Portugal. Furthermore, it investigates the effectiveness o... [more]

Sustainability is a strategic approach to develop a more sustainable economy to support the environment and socio-economic development. Literature on sustainability has been concerned mainly with global warming and environmental degradation issues, whereas the Circular Economy (CE) concept has recently been suggested as an alternative solution to support market sustainability and deal with both environmental and socio-economic challenges. In order to tackle these challenges, countries must switch from linear economies that follow the “take-make-dispose” principle to circular and sustainable economies. This study applies a structural and conceptual literature review to elucidate the most decisive determinants in the formation of circular strategies, particularly in the context of the energy sector. This study examines obstacles that hinder CE adoption and formulates drivers and measures to overcome them. The strategic literature review shows that the circular approach is critical in ach... [more]

The oil & gas transport and storage (OGTS) engineering, from the upstream of gathering and processing in the oil & gas fields, to the midstream long-distance pipelines, and the downstream tanks and LNG terminals, while using supply chains to connect each part, is exploring its way to reduce energy consumption and carbon footprints. This work provides an overview of current methods and technological improvements and the latest trends in OGTS to show how this industry strives to achieve sustainable development goals. The critical analyses are from increasing flexibility, energy saving, emission reduction, and changing energy structure. The study shows the need to focus on improving energy efficiency further, reducing energy/water/material consumption and emissions, and maintaining safety for such an extensive oil & gas network.

A key motivation for airborne wind energy is its potential to reduce the amount of material required for the generation of renewable energy. On the other hand, the materials used for airborne systems’ components are generally linked to higher environmental impacts. This study presents comparative life-cycle analyses for future multi-megawatt airborne wind energy systems and conventional wind turbines, with both technologies operating in the same farm configuration and under matching environmental conditions. The analyses quantify the global warming potential and cumulative energy demand of the emerging and established wind energy technologies. The cumulative energy demand is subsequently also used to determine the energy payback time and the energy return on investment. The selected airborne wind energy system is based on the design of Ampyx Power, using a fixed-wing aircraft that is tethered to a generator on the ground. The conventional wind turbine is primarily based on the NREL 5 M... [more]

The production of cement accounts for 5 to 7% of carbon dioxide emissions in the world, and its broad-scale use contributes to climate imbalance. As a solution, biotechnology enables the cultivation of bacteria and fungi for the synthesis of calcium carbonate as one of the main constituents of cement. Through biomineralization, which is the initial driving force for the synthesis of compounds compatible with concrete, and crystallization, these compounds can be delivered to cracks in concrete. Microencapsulation is a method that serves as a clock to determine when crystallization is needed, which is assisted by control factors such as pH and aeration. The present review addresses possibilities of working with bioconcrete, describing the composition of Portland cement, analysis methods, deterioration, as well as environmental and energetic benefits of using such an alternative material. A discussion on carbon credits is also offered. The contents of this paper could strengthen the prosp... [more]

Energy is one of the most important aspects of urban development and technological advancements. As its production and consumption are connected to several environmental, social, and economic issues covering all three sustainability pillars, strategic and targeted energy planning is vital to the smooth transition towards a more efficient and greener society. In accordance with the specific priorities of every state, sustainable energy planning should also satisfy the international trends, requirements, and targets, including the global commitments for sustainable development. As of this time, energy transition with further deployment of renewable energy and energy efficiency improvement are the priorities for a sustainable future. However, due to recent global events, a new situation has been established. The COVID-19 pandemic and the ongoing war in Ukraine have caused new circumstances challenging the recognized approaches for an effective sustainable energy strategy. While the global... [more]

The present day is marked by the economic expansiveness of societies and the adoption and adaptation of intelligent technologies. In this hyper-world, customers expect a personalized offer enhanced with customized service, which results in the introduction of sustainable and intelligent solutions—among other services. What becomes important is not so much the “Primum non nocere” of creation as much as the “go smart to the future” in creating. The smart logistics concept is a representation of this trend. The subject of the article is an analysis of the impact of the application of the smart idea in the field of sustainable development on changes in logistics in customer service at the last-mile stage. The source of this article is exploratory research of secondary sources, including books, articles, and reports, which has been subjected to a critical content analysis. The obtained results made it possible to design and implement an explanatory study of online-buying habits of people ba... [more]

In the era of Industry 4.0, manufacturing and production systems were revolutionized by increasing operational efficiency and developing and implementing new business models, services, and products. Concretely, the milestone set for Industry 4.0 was to improve the sustainability and efficiency of production systems. By extension, the emphasis was focused on both the digitization and the digitalization of systems, providing room for further improvement. However, the current technological evolution is more system/machine-oriented, rather than human-oriented. Thus, several countries have begun orchestrating initiatives towards the design and development of the human-centric aspect of technologies, systems, and services, which has been coined as Industry 5.0. The impact of Industry 5.0 will extend to societal transformation, which eventually leads to the generation of a new society, the Society 5.0. The developments will be focused on the social and human-centric aspect of the tools and te... [more]

Glycerol, a highly functionalised polyol, can be used as a platform molecule to produce a variety of high-value chemicals. As glycerol production is projected to increase over the coming years, it’s critically important that technology and infrastructure are developed to make use of the inevitable surplus. The catalytic production of ‘green’ mono alcohols from glycerol, in the absence of H2, is an emerging area of research that, in recent years, has generated significant industrial interest. Herein, we provide an update on recent advances in this field and discuss challenges which need to be overcome if this approach is to be considered viable industrially. The economic significance of using crude glycerol as a feedstock for glycerol valorisation strategies is also addressed and suggestions for improving the impact of research conducted in this field are proposed.

The maintenance of wireless sensor networks involves challenges such as the periodic replacement of batteries or energy sources in remote locations that are often inaccessible. Therefore, onboard energy harvesting solutions can provide a viable alternative. Experimental energy harvesting from fluid flow, specifically from air flow, is typically restricted to a rotor and stator design or a model that strikes a piezoelectric. On the other hand, energy harvesting from mechanical vibrations routinely uses the linear motion of a magnet passing through a coil or vibrating piezoelectric elements. In this paper, we propose a novel V-twin harvester design that converts wind energy from a rotational input into the linear motion of a magnet inside a coil via a crank-slider mechanism. This design allows for high performance with a smoother voltage output when compared to a reference rotor/stator harvester design or piezoelectric method. At 0.5 Hz, a single crank-slider generated a voltage of 0.176... [more]

Taking into account the international policies in the field of environmental protection in the world in general, and in the European Union in particular, the reduction of greenhouse gas (GHG) emissions, and primarily of carbon dioxide, has become one of the most important objectives. This can be obtained through various renewable energy sources and non-polluting technologies, such as the mixing of hydrogen and natural gas. Combining hydrogen with natural gas is an emerging trend in the energy industry and represents one of the most important changes in the efforts to achieve extensive decarbonisation. The importance of this article consists of carrying out a techno-economic study based on the simulation of annual consumptions regarding the construction and use of production capacities for hydrogen to be used in mixtures with natural gas in various percentages in the distribution network of an important operator in Romania. In order to obtain relevant results, natural gas was treated as... [more]

The main objective of this research is to assess the impact of energy certificate ratings (EPCs) on the value per m2 of Portuguese housing sales. Data from 289 Portuguese municipalities between 2014 and 2019, analysed with a fixed effects panel and method of moments quantile regression, were used. EPCs with high energy efficiency ratings (e.g., A+, A, B, and B-) are used as a proxy for dwellings with “green” or “environmentally friendly” certificates. On the other hand, ratings with a low energy efficiency (e.g., C, D, E, and F) are used as a proxy for dwellings with “non-green” or “not environmentally friendly” certificates. The results support that EPCs associated with green housing increase the value per m2 of housing sales, and those associated with non-green housing decrease the sales value. It was also found that municipal GDP, tax/financial incentive policies for energy efficiency, and the number of completed dwellings in new constructions for family housing will increase sales... [more]

Forest bioenergy value chains can offer attractive opportunities to promote economic development and mitigate climate change. However, implementing profitable and efficient forest biomass value chains requires overcoming barriers that continue to hinder the development of bioenergy systems in several jurisdictions. The objective of this study was to compare the economic, social, and environmental sustainability of various potential configurations of forest bioenergy value chains, including forest biomass supply and bioenergy production chains, in the Capitale-Nationale region of Quebec (Canada), which is a jurisdiction that has considerable forest resources but makes little use of bioenergy. We based our study on the ToSIA model parameterization and compared various policy measures, biomass supply, and logistics scenarios for 2008 and 2030. Our results showed that wood chip and pellet value chains in the Capitale-Nationale region would positively contribute to the regional economy in 2... [more]

Recent advancements in green building technologies (GBTs) have grown substantially, as an outcome of the environmental, economic and societal benefits. It has the potential to move toward sustainable development, specifically related to climate change. In GBTs, the main objective is to use energy, water and other resources in a balanced way, without using them extensively. This will improve the environmental conditions. Green buildings (GBs) are beneficial when it comes to energy consumption and emissions; low maintenance and operation costs; boosting health and productivity; etc. There is a lack of a critical review of the past or present research work in the area of the Green Building Technology (GBT) sector to identify the future roadmap for sustainable green building technologies. A critical review, with the help of proper research methodology, was identified. The scope of this study is to analyze the existing work on different issues, and find different key issues in green buildin... [more]

One of the biggest challenges of a modern enterprise is finding a balance between achieving environmental goals and being competitive in the era of Industry 4.0 requirements. The digital revolution is forcing companies to overcome various challenges that contribute to reducing energy consumption. Micro and small enterprises carry out activities in the field of energy efficiency by implementing measures to save energy and reduce total energy consumption. However, these activities are limited by many barriers to resources, which means that these activities are much smaller than those in large companies. The purpose of this study was to assess the performance of micro and small enterprises following environmental objectives in improving energy efficiency. The research study, based on a structured and standardized survey questionnaire, was conducted with the use of the CATI technique between April and May 2022 among the owners of micro and small enterprises operating in Poland. The study s... [more]

The treatment of municipal wastewater is considered a cornerstone for the protection of public health and environment. However, a major issue derived from this process is the large quantities of produced sewage sludge. Although anaerobic digestion is a widely applied method in Wastewater Treatment Plants (WWTPs) aiming to stabilize the sludge and to recover energy in the form of methane, it is usually limited due to the reduced decomposition efficiency and slow biodegradation rate of this recalcitrant substrate. For this reason, various pretreatment methods have been proposed aiming to modify the sludge structure, solubilize the organic matter, and decrease the crystallinity of sludge so as to accelerate hydrolysis and consequently enhance methane production. The current research is a comprehensive collection of recent advances in pretreatment technologies that can be potentially applied in wastewater treatment facilities. The critical review analysis presented herein reveals the sever... [more]

Wind energy research plays a vital role in the possibility of the success story of wind energy as one of the most promising sustainable energy sources. This continuous process has been achieved from the era of small wind turbines to the current Multi-WM standard and beyond. In this editorial paper, the progress and future outlook of wind energy research in two main aspects are discussed. The first aspect is in the area of wind turbine design and computations which covers engineering modeling and high-fidelity approaches. The second part of the paper discusses the usage of data-driven approaches in wind energy research. The paper compiles and presents the key findings of several recent studies in these two areas of research. The discussion of the paper is focused on the technical aspects of wind energy modeling. The main aim is to provide an overview about the direction of current research and its importance to meet future expectations.

Indonesia is currently undergoing the energy transition from heavily fossil fuel-dependent energy to cleaner sources of energy in order to achieve its net-zero emissions by 2060. In addition to reducing fossil fuel dependency, as one of the countries with the most geothermal reserves, the optimization of geothermal energy in Indonesia could be key to facilitating the energy transition. The objective of this paper is to elaborate on the transition process, which incorporates the destabilization of fossil fuel and the growth of geothermal energy, by analyzing the impact of both exogenous and endogenous factors on the supply chain structures of both sectors. This study employs workshop involving geothermal stakeholders in Indonesia, combined with the application of the Multi-Level Perspective (MLP) framework as the theoretical lens. The study found that energy demand, environmental awareness, energy regulations, energy supply chain, and geothermal potential breakthroughs are important asp... [more]

The quality of human nutrition has acquired significant improvements thanks to the opportunity to store food in suitable temperature conditions. Refrigeration has allowed the slowing of chemical and biological degradation and hence the waste of foodstuff, but at the same time increases energy consumption. These effects impact the environment and the sustainability performance of the cold chain, and drive consumers’ choices. The stakeholders of the chain are, therefore, constantly looking for improvement actions to reduce environmental impacts. This paper aims to provide a methodology for prioritizing and assessing the energy efficiency measures for cold chains in terms of quality losses and specific energy consumption, distinguishing between technological, maintenance, and managerial opportunities. This analysis is based on the cold supply chain tool, developed under the H2020 project ICCEE (“Improving Cold Chain Energy Efficiency”) which focuses on a holistic approach, not looking onl... [more]

This proposal evaluates the energy potential of agricultural residues of Zea mays from an indigenous community in Mexico. The study consists of four stages: (a) evaluation of residue production in all community farming areas (b) morphological and physicochemical characterization, using scanning electron microscopy (SEM), as well as infrared spectroscopy (FTIR) and Raman (c) the proximal and functional evaluation of the residues, through fiber analysis, determination of fixed carbon, humidity, estimation of calorific value, ash microanalysis and elemental analysis, and (d) evaluation of energy potential and multicriteria analysis. The results show that Z. mays residues have initial moisture values of less than 10%, ash content below 20%, fixed carbon around 14% and a calorific value of 17.6 MJ/kg associated with polymeric compounds and carbohydrates, as well as a percentage of extractable compounds of the order of 40%. The production of these residues on the 249 hectares (ha) of cultiva... [more]

The energy storage is an important character for sustainable energy structures and the prospective future economy. This paper aims to propose a multi-attribute decision analysis (MADA) approach to prioritize and choose the energy storage system (ESS) alternatives in terms of the different technical, economic, environmental and social aspects of them. In this line, an integrated approach is developed with the combination of intuitionistic fuzzy sets (IFSs), a method using the removal effects of criteria (MEREC), rank sum (RS) and the measurement of the alternatives and ranking based on compromise solution (MARCOS) methods for prioritizing the ESSs. The IF-MEREC-RS was used to find the integrated weight by combining the objective and subjective weights of the different indicators for prioritizing the ESSs. The MARCOS method was implemented to rank the various ESSs over several crucial indicators of sustainability. The practical outcome illustrates that the Li-ion battery (LIB) is the bes... [more]

The article deals with the impacts of economic, ecological, and social development scenarios in ensuring sustainable energy development. EU countries were the statistical bases of the study; the assessment period was from 2000 to 2019. The information bases of the research were the World Bank, the Organization for Economic Cooperation and Development, and the European Commission data. Based on the generalized method of moments, the authors investigated the dependence of energy consumption on economic, environmental, and social development factors. The results confirm the positive relationship between renewable energy consumption and GDP per capita, foreign direct investment, and energy depletion. A negative relationship between the consumption of renewable energy, CO2 emissions, and domestic gas emissions was proved. Based on intelligent data analysis methods (methods involving one-dimensional branching CART and agglomeration), countries were clustered depending on the nature of the en... [more]

The construction industry has experienced phenomenal growth because of technological advancements in the past couple of decades. Prefabrication constitutes a sizeable share of this industry and is being adopted all over the world. The method of casting construction elements in a controlled environment and assembling them on-site has revolutionised the industry. Research on various aspects of the technology is ongoing around the world, and an impressive number of articles have been published. However, the prefab technology, materials used, and terminology have varied across locations, which may have hindered the method’s wider acceptability. By evaluating technical articles published between 1991 and 2022, this report analyses the present body of knowledge regarding prefab technology, its evolution, sustainability, and stakeholder views. This technology effectively contributes around 40% in time saving, 27% in cost reduction, 30% in reduced carbon emissions, and 84% in on-site wastage r... [more]

In respect to CO2 emissions, the post-Soviet states are a scientifically interesting object of research, as each of the countries has developed via different paths since reclaiming independence from the Soviet Union. Given that each country has a different approach to the use of fossil resources, it is essential to assess their input to global carbon footprint individually. Such assessment then allows to find certain actions in the development of legislation and to apply focused techniques to reduce carbon emissions. The aim of this study was to evaluate the fossil CO2 emissions produced in the Baltic States from 1991 onward, describing challenges relating to sustainability and socio-economic, scientific, and integrated approaches to sustainable development, including clean and efficient use of energy, and thus addressing climate challenges. This paper reports on data on CO2 emissions in the Baltic States. The results show that the transition of the Baltic States from the specificities... [more]