The integration and control of energy systems for power generation consists of multiple heterogeneous subsystems, such as chemical, electrochemical, and thermal, and contains challenges that arise from the multi-way interactions due to complex dynamic responses among the involved subsystems. The main motivation of this work is to design the control system for an autonomous automated and sustainable system that meets a certain power demand profile. A systematic methodology for the integration and control of a hybrid system that converts liquefied petroleum gas (LPG) to hydrogen, which is subsequently used to generate electrical power in a high-temperature fuel cell that charges a Li-Ion battery unit, is presented. An advanced nonlinear model predictive control (NMPC) framework is implemented to achieve this goal. The operational objective is the satisfaction of power demand while maintaining operation within a safe region and ensuring thermal and chemical balance. The proposed NMPC fram... [more]

This paper proposes a flexible framework for scheduling and real time operation of electric vehicle charging stations (EVCS). The methodology applies a multi-objective evolutionary particle swarm optimization algorithm (EPSO) for electric vehicles (EVs) scheduling based on a day-ahead scenario. Then, real time operation is managed based on a rule-based (RB) approach. Two types of consumer were considered: EV owners with a day-ahead request for charging (scheduled consumers, SCh) and non-scheduling users (NSCh). EPSO has two main objectives: cost reduction and reduce overloading for high demand in grid. The EVCS has support by photovoltaic generation (PV), battery energy storage systems (BESS), and the distribution grid. The method allows the selection between three types of charging, distributing it according to EV demand. The model estimates SC remaining state of charge (SoC) for arriving to EVCS and then adjusts the actual difference by the RB. The results showed a profit for EVCS by... [more]

Solving the neutron transport equations is a demanding computational challenge. This paper combines reduced-order modelling with domain decomposition to develop an approach that can tackle such problems. The idea is to decompose the domain of a reactor, form basis functions locally in each sub-domain and construct a reduced-order model from this. Several different ways of constructing the basis functions for local sub-domains are proposed, and a comparison is given with a reduced-order model that is formed globally. A relatively simple one-dimensional slab reactor provides a test case with which to investigate the capabilities of the proposed methods. The results show that domain decomposition reduced-order model methods perform comparably with the global reduced-order model when the total number of reduced variables in the system is the same with the potential for the offline computational cost to be significantly less expensive.

Earth to air heat exchangers are widely utilized to cool or heat passive buildings for energy savings. They often need to deal with high humidity air conditions, especially in the greenhouse due to plant transpiration, and the condensation phenomenon is frequently observed during the cooling process. To evaluate the effect of humidity and condensation on thermal performance, a three dimensional computational fluid dynamic (3D-CFD) model was developed. The distribution of relative humidity in each pipe was investigated, and the impact of inlet air relative humidity on the integrated performance of the earth to air heat exchanger was discussed. The effects of inlet air temperature and volume flow rate were also analyzed. Moreover, the influence of the heat exchanger configurations on the performance of the air condensation was researched. The results indicated that condensation had few effects on the airflow distribution uniformity of the earth to air heat exchanger, while it acted obser... [more]

Advanced technologies call for composting indoors for minimized impact on the surrounding environment. However, enclosing compost piles inside halls may cause the accumulation of toxic pollutants, including carbon monoxide (CO). Thus, there is a need to assess the occupational risk to workers that can be exposed to CO concentrations > 300 ppm at the initial stage of the process. The objectives were to (1) develop a model of CO accumulation in the headspace of the bioreactor during organic waste composting and (2) assess the impact of headspace ventilation of enclosed compost. The maximum allowable CO level inside the bioreactor headspace for potential short-term occupational exposure up to 10 min was 100 ppm. The composting was modeled in the horizontal static reactor over 14 days in seven scenarios, differing in the ratio of headspace-to-waste volumes (H:W) (4:1, 3:1, 2:1, 1:1, 1:2, 1:3, 1:4). Headspace CO concentration exceeded 100 ppm in each variant with the maximum value of 36.1%... [more]

The article presents the experimental investigation of low-lifting capacity hydraulic scissor lift energy consumption. The analysis is based on experimental tests of two individual drives of the scissor lift: the conventional one and the variable-speed electro-hydraulic one. The investigation focuses on the study of the total energy consumption for lifting and lowering the scissor lift with different masses of transported cargo and also power consumptions of each element supplying these systems. Particular attention was paid to the significant impact of power supply on each control component as the main factor of reduction in the energetic efficiency of the low-lifting capacity scissor lift. A comparison of both drives indicated that the mass of transported cargo has a significant influence on the choice of the drive used. Results of the research show that significant energetic savings are obtained, as the modernized propulsion system consumes 67% energy of the standard one. A decrease... [more]

The electro-hydraulic servo pump control system (EHSPCS) is a high-performance control unit that integrates a permanent magnet synchronous motor (PMSM) and a closed hydraulic system (CHS). The design features of high integration and a high power-weight ratio lead to the poor heat dissipation capacity and high thermal balance temperature of the system. Excessive temperature will seriously affect the system’s performance and service life. Therefore, the thermal balance analysis method of the EHSPCS under different loads and different wind speeds was proposed in this paper. Firstly, the PMSM and CHS were taken as research objects to analyze the heating source of the system. The thermal power model was established, and the calculation was performed. The variation rule of the thermal power generated by each component with the load torque under the typical rotating speed was obtained. Secondly, the system’s temperature field thermal balance solution model was established. ANSYS and AMESim so... [more]

This paper presents Nyström minimum kernel risk-sensitive loss (NysMKRSL) based control of a three-phase four-wire grid-tied dual-stage PV-hybrid energy storage system, under varying conditions such as irradiation variation, unbalanced load, and abnormal grid voltage. The Voltage Source Converter (VSC) control enables the system to perform multifunctional operations such as reactive power compensation, load balancing, power balancing, and harmonics elimination while maintaining Unity Power Factor (UPF). The proposed VSC control delivers more accurate weights with fewer oscillations, hence reducing overall losses and providing better stability to the system. The seamless control with the Hybrid Energy Storage System (HESS) facilitates the system’s grid-tied and isolated operation. The HESS includes the battery, fuel cell, and ultra-capacitor to accomplish the peak shaving, managing the disturbances of sudden and prolonged nature occurring due to load unbalancing and abnormal grid voltag... [more]

This paper demonstrates the interoperability of an emerging alternate arm converter (AAC) with the state-of-the-art modular multilevel converter (MMC) in high-voltage direct current (HVDC) systems based on a hybrid VSC-HVDC system. The paper also showcases the parameter derivation of the hybrid HVDC system and its detailed control structure. The study provides preliminary steps towards detailed analysis of AAC interoperability in complex hybrid dc grid configurations. A detailed set of results based on the 800 MVA hybrid voltage source converter (VSC)-HVDC system showcases the interoperability performance of the AAC under different operating scenarios and verifies its associated control functions.

This article presents a comparative analysis for the design considerations for a solar power generation transformer. One of the main existing problems in transformer manufacturing is in the renewable energy field, specifically the solar power generation, where the transformer connected to the inverter is operated under a certain harmonic content and operating conditions. The operating conditions of the transformer connected to the inverter are particularly unknown for each solar power plant; thus, the transformer will be subject to a particular harmonic content, which is defined by the inverter of the solar power plant. First, the fundamental calculations for solar power plant transformer and the proposed methodology for the design calculation of the distribution pad-mounted three phase transformer are presented. Then, a design study case is described where a distribution transformer and an inverter of a particular solar power plant are used for the analysis. Next, the transformer unde... [more]

Lithium-ion (Li-I) batteries have recently become pervasive and are used in many physical assets. For the effective management of the batteries, reliable predictions of the end-of-discharge (EOD) and end-of-life (EOL) are essential. Many detailed electrochemical models have been developed for the batteries. Their parameters are calibrated before they are taken into operation and are typically not re-calibrated during operation. However, the degradation of batteries increases the reality gap between the computational models and the physical systems and leads to inaccurate predictions of EOD/EOL. The current calibration approaches are either computationally expensive (model-based calibration) or require large amounts of ground truth data for degradation parameters (supervised data-driven calibration). This is often infeasible for many practical applications. In this paper, we introduce a reinforcement learning-based framework for reliably inferring calibration parameters of battery model... [more]

Maximum-power point tracking of wind turbines is a challenging issue considering fast changing wind conditions of urban areas. For this purpose, an adaptive control approach that is fast and robust is required. Conventional approaches based on simple step perturbations and subsequent observation, however, are difficult to design and too slow for the demanding wind conditions of urban areas including gusts and turbulence. In this paper, an extremum seeking control scheme to the recently developed wind turbine MOWEA (Modulare Windenergieanlagen GmbH) is proposed and successfully applied. To this end, a comprehensive aero-electromechanical model of the wind turbine under study including basic control is formulated. Next, the extremum seeking control scheme is adapted to the system. Several aspects to increase adaptation speed are highlighted, including a novel phase compensation. Finally, a validation of the proposed approach is performed considering real wind data, thus demonstrating its... [more]

The objective of this study was to modify an existing liquid desiccant and indirect/direct evaporative cooling-assisted 100% outdoor air system (LD-IDECOAS) for humidification operation in winter. The energy benefit of the liquid desiccant-assisted humidification approach during the operation of LD-IDECOAS over the conventional method with a steam humidifier was evaluated through a detailed energy simulation. The humidification and enthalpy effectiveness values of the liquid desiccant humidification measured from laboratory tests were 0.41 and 0.49, respectively, which were applied to the energy simulation for the modified system. Both systems with the proposed and conventional humidification approaches were simulated using an engineering equation solver combined with a TRNSYS 18 energy simulation program. The results demonstrated that the modified LD-IDECOAS consumes less energy for humidification compared to the existing system with a steam humidifier. The proposed system also exhibi... [more]

With the increasing demand for renewable energy power generation systems, high-power DC transmission technology is drawing considerable attention. As a result, stability issues associated with high power DC transmission have been highlighted. One of these problems is the fault current that appears when a fault occurs in the transmission line. If the fault current flows in the transmission line, it has a serious adverse effect on the rectifier stage, inverter stage and transmission line load. This makes the transmission technology less reliable and can lead to secondary problems such as fire. Therefore, fault current must be managed safely. DC circuit breaker technology has been proposed to solve this problem. However, conventional technologies generally do not take into account the effects of fault current on the transmission line, and their efficiency is relatively low. The purpose of this study is to introduce an improved DC circuit breaker that uses a blocking inductor to minimize t... [more]

In the developing context of distributed generation and flexible smart grids, in order to realize electrochemical storage systems, Modular Multilevel Converters (MMCs) represent an interesting alternative to the more traditional Voltage Source Inverters (VSIs). This paper presents a novel analytical investigation of electrochemical cell power losses in MMCs and their dependence on the injected common mode voltage. Steady-state cell losses are calculated under Nearest Level Control (NLC) modulation for MMCs equipped with a large number of half-bridge modules, each directly connected to an elementary electrochemical cell. The total cell losses of both a Single Star MMC (SS-MMC) and a Double Star MMC (DS MMC) are derived and compared to the loss of a VSI working under the same conditions. An optimum common mode voltage injection law is developed, leading to the minimum cell losses possible. In the worst case, it achieves a 17.5% reduction in cell losses compared to conventional injection... [more]

Carbon nanofibers decorated with various metal oxide nanoparticles were fabricated by combining an electrospinning technique of bicomponent polymer mixture and a sol-gel reaction and subsequent carbonization process. Electrospun polymer nanofibers consisting of polyacrylonitrile (PAN) and poly(vinyl pyrrolidone) (PVP) with controllable diameters were fabricated with PAN/PVP core/shell types via phase-separation due to the immiscibility between two polymers. The electrospun nanofibers served as supporting materials with binding sites of PVP to incorporate titanium oxide precursor. Subsequently, the carbonization of the fibers led to the formation of carbon nanofibers@TiO2 for energy application, in which rutile TiO2 nanoparticles were decorated on the surface of carbon nanofiber. Especially, this TiO2 decorated carbon nanofiber electrode exhibited excellent electrochemical property in lithium-ion batteries (≈600 mA h g−1 at C/5 rate for 100 cycles). Furthermore, the carbon nanofibers we... [more]

Local implementation projects for sector coupling play an important role in the transformation to a more sustainable energy system. Despite various technical possibilities, there are various barriers to the realisation of local projects. Against this backdrop, we introduce an inter- and transdisciplinary approach to identifying and evaluating different power-to-X paths as well as setting up robust local implementation projects, which account for existing drivers and potential hurdles early on. After developing the approach conceptually, we exemplify our elaborations by applying them to a use case in the German city of Wuppertal. It can be shown that a mix of several interlinked interdisciplinary methods as well as several participatory elements is suitable for triggering a collective, local innovation process. However, the timing and extent of end-user integration remain a balancing act. The paper does not focus on a detailed description of power-to-X (PtX) as a central pillar of the s... [more]

This paper aims to design thermal dummy cells (TDCs) that can be used in the development of lithium-ion battery thermal management systems. Based on physical property and geometry of real 18,650 cylindrical cells, a three-dimensional model of TDCs was designed, and it is used to numerically simulate the thermal performance of TDCs. Simulations show that the TDC can mimic the temperature change on the surface of a real cell both at static and dynamic current load. Experimental results show that the rate of heating resistance of TDC is less than 0.43% for temperatures between 27.5 °C and 90.5 °C. Powered by a two-step voltage source of 12 V, the temperature difference of TDCs is 1 °C and 1.6 °C along the circumference and the axial directions, respectively. Powered by a constant voltage source of 6 V, the temperature rising rates on the surface and in the core are higher than 1.9 °C/min. Afterwards, the proposed TDC was used to simulate a real cell for investigating its thermal performan... [more]

Classification of the sources of partial discharges has been a standard procedure to assess the status of insulation in high voltage systems. One of the challenges while classifying these sources is the decision on the distinct properties of each one, often requiring the skills of trained human experts. Machine learning offers a solution to this problem by allowing to train models based on extracted features. The performance of such algorithms heavily depends on the choice of features. This can be overcome by using deep learning where feature extraction is done automatically by the algorithm, and the input to such an algorithm is the raw input data. In this work, an enhanced convolutional neural network is proposed that is capable of classifying single sources as well as multiple sources of partial discharges without introducing multiple sources in the training phase. The training is done by using only single-source phase-resolved partial discharge (PRPD) patterns, while testing is per... [more]

The paper investigates hydraulic wave propagation phenomena through hydraulic circuits of power transmission systems by means of numerical approaches. The actuation circuit of a Dual-Clutch Transmission (DCT) power transmission system supplied by a Gerotor pump is analyzed. A steady state approach is adopted to detect resonance phenomena due to Gerotor design parameters and circuit lengths, while one-dimensional numerical models are implemented to predict the pressure oscillations through the hydraulic ducts for the whole pump operating domain. CFD-1D pipelines are adopted to address the pressure oscillation behavior through the hydraulic pipeline, while spectral maps and order tracking techniques are used to evaluate their fluctuation intensity in function of the pump speed rate. The numerical models are validated with experimental tests performed on an ad hoc test rig for power transmission systems and a good match is found between the numerical and the experimental results. Pump des... [more]

The selective catalytic reduction method is a useful method for the denitrification process of exhaust gas emitted from industrial facilities. The distribution of the ammonia−nitrogen oxide mixing ratio at the inlet of the catalyst layers is important in the denitrification process. In this study, a computational analysis technique was used to improve the uniformity of the NH3/NO molar ratio by controlling the flow rate of the ammonia injection nozzle according to the flow distribution of nitrogen oxides in the inlet exhaust gas of the denitrification facility. The application model was simplified to the two-dimensional array adopted from the existing selective catalytic reduction (SCR) process in the large-scaled coal-fired power plant. As the inlet conditions, four (4) types of flow pattern were simulated, i.e., parabolic, upper-skewed, lower-skewed, and random. The flow rate of the eight (8) nozzles installed in the ammonia injection grid was controlled by Design Xplorer as the opti... [more]

One of the goals of new CAE (Computer Aided Engineering) software is to reduce both time and costs of the design process without compromising accuracy. This result can be achieved, for instance, by promoting a “plug and play” philosophy, based on the adoption of automatic mesh generation algorithms. This in turn brings about some drawbacks, among others an unavoidable loss of accuracy due to the lack of specificity of the produced discretization. Alternatively it is possible to rely on the so called “meshless” methods, which skip the mesh generation process altogether. The purpose of this paper is to present a fully meshless approach, based on Radial Basis Function generated Finite Differences (RBF-FD), for the numerical solution of generic elliptic PDEs, with particular reference to time-dependent and steady 3D heat conduction problems. The absence of connectivity information, which is a peculiar feature of this meshless approach, is leveraged in order to develop an efficient procedur... [more]

Producing high-fidelity real-time simulations of neutron diffusion in a reactor is computationally extremely challenging, due, in part, to multiscale behaviour in energy and space. In many scientific fields, including nuclear modelling, the application of reduced-order modelling can lead to much faster computation times without much loss of accuracy, paving the way for real-time simulation as well as multi-query problems such as uncertainty quantification and data assimilation. This paper compares two reduced-order models that are applied to model the movement of control rods in a fuel assembly for a given temperature profile. The first is a standard approach using proper orthogonal decomposition (POD) to generate global basis functions, and the second, a new method, uses POD but produces global basis functions that are local in the parameter space (associated with the control-rod height). To approximate the eigenvalue problem in reduced space, a novel, nonlinear interpolation is propo... [more]

In a wireless power transfer (WPT) system, the power transfer efficiency (PTE) decreases sharply with the increase in transfer distance. Metamaterials (MMs) have shown great potential to enhance PTE in mid-range WPT systems. In this paper, we propose two MM slabs of a 3 × 3 array to enhance the magnetic coupling. The MM unit cell was designed by using square spiral patterns on a thin printed circuit board (PCB). Moreover, the asymmetric four-coil WPT system was designed and built based on the practical application scenario of wireless charging for unmanned devices. The simulation and experimental results show that two MM slabs can enhance power transmission capability better than one MM slab. By optimizing the position and spacing of two MM slabs, the PTE was significantly improved at a mid-range distance. The measured PTEs of a system with two MM slabs can reach 72.05%, 64.33% and 49.63% at transfer distances of 80, 100 and 120 cm. When the transfer distance is 100 cm, the PTE of a sy... [more]

The present work considers the dramatic changes the COVID-19 pandemic has brought to the global economy, with particular emphasis on energy. Focusing on the European Union, the article discusses the opportunities policy makers can implement to reduce the climate impacts and achieve the Paris Agreement 2050 targets. The analysis specifically looks at the fossil fuels industry and the future of the fossil sector post COVID-19 pandemic. The analysis first revises the fossil fuel sector, and then considers the need for a shift of the global climate change policy from promoting the deployment of renewable energy sources to curtailing the use of fossil fuels. This will be a change to the current global approach, from a relative passive one to a strategically dynamic and proactive one. Such a curtailment should be based on actual volumes of fossil fuels used and not on percentages. Finally, conclusions are preliminary applied to the European Union policies for net zero by 2050 based on a two-... [more]