Distribution network operators face technical and operational challenges in integrating the increasing number of distributed energy resources (DER) with the distribution network. The hosting capacity analysis quantifies the level of power quality violation on the network due to the high penetration of the DER, such as over voltage, under voltage, transformer and feeder overloading, and protection failures. Real-time monitoring of the power quality factors such as the voltage, current, angle, frequency, harmonics and overloading that would help the distribution network operators overcome the challenges created by the high penetration of the DER. In this paper, different conventional hosting capacity analysis methods have been discussed. These methods have been compared based on the network constraints, impact factors, required input data, computational efficiency, and output accuracy. The artificial intelligence approaches of the hosting capacity analysis for the real-time monitoring of... [more]

Fault diagnosis plays an important role in complex and safety-critical systems such as nuclear power plants (NPPs). With the development of artificial intelligence (AI), extensive research has been carried out for fast and efficient fault diagnosis based on intelligent methods. This paper presents a review of various AI-based system-level fault diagnosis methods for NPPs. We first discuss the development history of AI. Based on this exposition, AI-based fault diagnosis techniques are classified into knowledge-driven and data-driven approaches. For knowledge-driven methods, we discuss both the early if−then-based fault diagnosis techniques and the current new theory-based ones. The principles, application, and comparative analysis of the representative methods are systematically described. For data-driven strategies, we discuss single-algorithm-based techniques such as ANN, SVM, PCA, DT, and clustering, as well as hybrid techniques that combine algorithms together. The advantages and di... [more]

The energy transition and the resulting expansion of renewable energy resources increasingly pose a challenge to the energy system due to their volatile and intermittent nature. In this context, energy management systems are central as they coordinate energy flows and optimize them toward economic, technical, ecological, and social objectives. While numerous scientific publications study the infrastructure, optimization, and implementation of residential energy management systems, only little research exists on industrial energy management systems. However, results are not easily transferable due to differences in complexity, dependency, and load curves. Therefore, we present a systematic literature review on state-of-the-art research for residential and industrial energy management systems to identify trends, challenges, and future research directions. More specifically, we analyze the energy system infrastructure, discuss data-driven monitoring and analysis, and review the decision-m... [more]

Intelligent energy management in renewable-based power distribution applications, such as microgrids, smart grids, smart buildings, and EV systems, is becoming increasingly important in the context of the transition toward the decentralization, digitalization, and decarbonization of energy networks. Arguably, many challenges can be overcome, and benefits leveraged, in this transition by the adoption of intelligent autonomous computer-based decision-making through the introduction of smart technologies, specifically artificial intelligence. Unlike other numerical or soft computing optimization methods, the control based on artificial intelligence allows the decentralized power units to collaborate in making the best decision of fulfilling the administrator’s needs, rather than only a primitive decentralization based only on the division of tasks. Among the smart approaches, reinforcement learning stands as the most relevant and successful, particularly in power distribution management a... [more]

One of the most important and challenging research subjects in computer vision is visual object tracking. The information obtained from the first frame consists of limited and insufficient information to represent an object. If prior information about robust representation that can represent an object well is not sufficient, object tracking fails when not robustly responding to changes in features of the target object according to various factors, namely shape, illumination variation, and scene distortion. In this paper, a real-time single object tracking algorithm is proposed based on a Siamese network to solve this problem. For the object feature extraction, we designed a fully convolutional neural network that removes a fully connected layer and configured a convolution block consisting of a bottleneck structure that preserves the information in a previous layer. This network was designed as a Siamese network, while a regional proposal network was combined at the end of the network... [more]

The Unified Power Quality Conditioner (UPQC) is a technology that has successfully addressed power quality issues. In this paper, a photovoltaic system with battery storage powered Unified Power Quality Conditioner is presented. Total harmonic distortion of the grid current during extreme voltage sag and swell conditions is more than 5% when UPQC is controlled with synchronous reference frame theory (SRF) and instantaneous reactive power theory (PQ) control. The shunt active filter of the UPQC is controlled by the artificial neural network to overcome the above problem. The proposed artificial neural network controller helps to simplify the control complexity and mitigate power quality issues effectively. This study aims to use a neural network to control a shunt active filter of the UPQC to maximise the supply of active power loads and grid and also used to mitigate the harmonic problem due to non-linear loads in the grid. The performance of the model is tested under various case scen... [more]

Smart Grids (SGs) are governed by advanced computing, control technologies, and networking infrastructure. However, compromised cybersecurity of the smart grid not only affects the security of existing energy systems but also directly impacts national security. The increasing number of cyberattacks against the smart grid urgently necessitates more robust security protection technologies to maintain the security of the grid system and its operations. The purpose of this review paper is to provide a thorough understanding of the incumbent cyberattacks’ influence on the entire smart grid ecosystem. In this paper, we review the various threats in the smart grid, which have two core domains: the intrinsic vulnerability of the system and the external cyberattacks. Similarly, we analyze the vulnerabilities of all components of the smart grid (hardware, software, and data communication), data management, services and applications, running environment, and evolving and complex smart grids. A st... [more]

Power quality (PQ) problems, including voltage sag, flicker, and harmonics, are the main concerns for the grid operator. Among these disturbances, voltage sag, which affects the sensitive loads in the interconnected system, is a crucial problem in the transmission and distribution systems. The determination of the voltage sag relative location as a downstream (DS) and upstream (US) is an important issue that should be considered when mitigating the sag problem. Therefore, this paper proposes a novel approach to determine the voltage sag relative location based on voltage sag event records of the power quality monitoring system (PQMS) in the real distribution system. By this method, the relative location of voltage sag is defined by Gaussian naive Bayes (Gaussian NB) and K-nearest neighbors (K-NN) algorithms. The proposed methods are compared with support vector machine (SVM) and artificial neural network (ANN). The results indicate that K-NN and Gaussian NB algorithms define the relati... [more]

Nowadays, there is a growing demand for information security and security rules all across the world. Intrusion detection (ID) is a critical technique for detecting dangers in a network during data transmission. Artificial Intelligence (AI) methods support the Internet of Things (IoT) and smart cities by creating gadgets replicating intelligent behavior and enabling decision making with little or no human intervention. This research proposes novel technique for secure data transmission and detecting an intruder in a biometric authentication system by feature extraction with classification. Here, an intruder is detected by collecting the biometric database of the smart building based on the IoT. These biometric data are processed for noise removal, smoothening, and normalization. The processed data features are extracted using the kernel-based principal component analysis (KPCA). Then, the processed features are classified using the convolutional VGG−16 Net architecture. Then, the entir... [more]

With the increasing complexity of power system structures and the increasing penetration of renewable energy, driven primarily by the need for decarbonization, power system operation and control become challenging. Changes are resulting in an enormous increase in system complexity, wherein the number of active control points in the grid is too high to be managed manually and provide an opportunity for the application of artificial intelligence technology in the power system. For power flow control, many studies have focused on using generation redispatching, load shedding, or demand side management flexibilities. This paper presents a novel reinforcement learning (RL)-based approach for the secure operation of power system via autonomous topology changes considering various constraints. The proposed agent learns from scratch to master power flow control purely from data. It can make autonomous topology changes according to current system conditions to support grid operators in making e... [more]

Security constrained unit commitment is an essential part of the day-ahead energy markets. The presence of discrete and continuous variables makes it a complex, mixed-integer, and time-hungry optimization problem. Grid operators solve unit commitment problems multiple times daily with only minor changes in the operating conditions. Solving a large-scale unit commitment problem requires considerable computational effort and a reasonable time. However, the solution time can be improved by exploiting the fact that the operating conditions do not change significantly in the day-ahead market clearing. Therefore, in this paper, a novel multi-layer data-driven approach is proposed, which significantly improves the solution time (90% time-reduction on average for the three studied systems). The proposed approach not only provides a near-optimal solution (<1% optimality gap) but also ensures that it is feasible for the stable operation of the system (0% infeasible predicted solutions). The e... [more]

Due to the increasing use of automobiles, the transportation industry is facing challenges of increased emissions, driver safety concerns, travel demand, etc. Hence, automotive industries are manufacturing vehicles that produce fewer emissions, are fuel-efficient, and provide safety for drivers. Artificial intelligence has taken a major leap recently and provides unprecedented opportunities to enhance performance, including in the automotive and transportation sectors. Artificial intelligence shows promising results in the trucking industry for increasing productivity, sustainability, reliability, and safety. Compared to passenger vehicles, heavy-duty vehicles present challenges due to their larger dimensions/weight and require attention to dynamics during operation. Data collected from vehicles can be used for emission and fuel consumption testing, as the drive cycle data represent real-world operating characteristics based on heavy-duty vehicles and their vocational use. Understandin... [more]

Reservoir simulation for unconventional reservoirs requires proper history matching (HM) to quantify the uncertainties of fracture properties and proper modeling methods to address complex fracture geometry. An integrated method, namely embedded discrete fracture model−artificial intelligence−automatic HM (EDFM−AI−AHM), was used to automatically generate HM solutions for a multistage hydraulic fracturing well in the Wolfcamp Formation. Thirteen scenarios with different combinations of matrix and fracture parameters as variables or fixed inputs were designed to generate 1300 reservoir simulations via EDFM−AI−AHM, from which 358 HM solutions were retained to reproduce production history and quantify the uncertainties of matrix and hydraulic fracture properties. The best HM solution was used for production forecasting and carbon dioxide (CO2)-enhanced oil recovery (EOR) strategy optimization. The results of the production forecast for primary recovery indicated that the drainage area for... [more]

Photovoltaic (PV) technology converts solar energy into electrical energy, and the PV industry is an essential renewable energy industry. However, the amount of power generated through PV systems is closely related to unpredictable and uncontrollable environmental factors such as solar radiation, temperature, humidity, cloud cover, and wind speed. Particularly, changes in temperature and solar radiation can substantially affect power generation, causing a sudden surplus or reduction in the power output. Nevertheless, accurately predicting the energy produced by PV power generation systems is crucial. This paper proposes a hybrid model comprising a convolutional neural network (CNN) and long short-term memory (LSTM) for stable power generation forecasting. The CNN classifies weather conditions, while the LSTM learns power generation patterns based on the weather conditions. The proposed model was trained and tested using the PV power output data from a power plant in Busan, Korea. Quant... [more]

Chemical looping combustion (CLC) is one of the most advanced technologies allowing for the reduction in CO2 emissions during the combustion of solid fuels. The modified method combines chemical looping with oxygen uncoupling (CLOU) and in situ gasification chemical looping combustion (iG-CLC). As a result, an innovative hybrid chemical looping combustion came into existence, making the above two technologies complementary. Since the complexity of the CLC is still not sufficiently recognized, the study of this process is of a practical significance. The paper describes the experiences in the modelling of complex geometry CLC equipment. The experimental facility consists of two reactors: an air reactor and a fuel reactor. The paper introduces the fuzzy logic (FL) method as an artificial intelligence (AI) approach for the prediction of SO2 and NOx (i.e., NO + NO2) emissions from coal and biomass combustion carried out in air-firing; oxyfuel; iG-CLC; and CLOU conditions. The developed mod... [more]

Energy and power demands for military operations continue to rise as autonomous air, land, and sea platforms are developed and deployed with increasingly energetic weapon systems. The primary limiting capability hindering full integration of such systems is the need to effectively and efficiently manage, generate, and transmit energy across the battlefield. Energy efficiency is primarily dictated by the number of dissimilar energy conversion processes in the system. After combustion, a Compression Ignition (CI) engine must periodically continue to inject fuel to produce mechanical energy, simultaneously generating thermal, acoustic, and fluid energy (in the form of unburnt hydrocarbons, engine coolant, and engine oil). In this paper, we present multiple sets of Shallow Artificial Neural Networks (SANNs), Convolutional Neural Network (CNNs), and K-th Nearest Neighbor (KNN) classifiers, capable of approximating the in-cylinder conditions and informing future optimization and control effo... [more]

This paper presents the ANN (Artificial Neural Networks) approach to obtaining complete P-V curves of electrical power systems subjected to contingency. Two networks were presented: the MLP (multilayer perceptron) and the RBF (radial basis function) networks. The differential of our methodology consisted in the speed of obtaining all the P-V curves of the system. The great advantage of using ANN models is that they can capture the nonlinear characteristics of the studied system to avoid iterative procedures. The applicability and effectiveness of the proposed methodology have been investigated on IEEE test systems (14 buses) and compared with the continuation power flow, which obtains the post-contingency loading margin starting from the base case solution. From the results, the ANN performed well, with a mean squared error (MSE) in training below the specified value. The network was able to estimate 98.4% of the voltage magnitude values within the established range, with residues arou... [more]

There is an increasing interest in improving energy efficiency and reducing operational costs of induction motors in the industry. These costs can be significantly reduced, and the efficiency of the motor can be improved if the condition of the machine is monitored regularly and if monitoring techniques are able to detect failures at an incipient stage. An early fault detection makes the elimination of costly standstills, unscheduled downtime, unplanned breakdowns, and industrial injuries possible. Furthermore, maintaining a proper motor operation by reducing incipient failures can reduce motor losses and extend its operating life. There are many review papers in which analyses of fault detection techniques in induction motors can be found. However, all these reviewed techniques can detect failures only at developed or advanced stages. To our knowledge, no review exists that assesses works able to detect failures at incipient stages. This paper presents a review of techniques and metho... [more]

For over a decade, distributed generations (DGs) have sufficiently convinced the researchers that they are the economic and environment-friendly solution that can be integrated with the centralized generations. The optimal planning of distributed generations requires the appropriate location and sizing and their corresponding control with various power network types to obtain the best of the technical, economical, commercial, and regulatory objectives. Most of these objectives are conflicting in nature and require multi-objective solutions. Therefore, this paper brings a comprehensive literature review and a critical analysis of the state of the art of the optimal multi-objective planning of DG installation in the power network with different objective functions and their constraints. The paper considers the adoption of optimization techniques for distributed generation planning in radial distribution systems from different power system performance viewpoints; it considers the use of d... [more]

Due to complexities in geologic structure, heterogeneity, and insufficient borehole information, shale formation faces challenges in accurately estimating the elastic properties of rock which triggers severe technical challenges in safe drilling and completion. These geomechanical properties could be computed from acoustic logs, however, accurate estimation is critical due to log deficit and a higher recovery expense of inadequate datasets. To fill the gap, this study focuses on predicting the sonic properties of rock using deep neural network (Bi-directional long short-time memory, Bi-LSTM) and random forest (RF) algorithms to estimate and evaluate the geomechanical properties of the potential unconventional formation, Permian Basin, situated in West Texas. A total of three wells were examined using both single-well and cross-well prediction algorithms. Log-derived single-well prediction models include a 75:25 ratio for training and testing the data whereas the cross-well includes two... [more]

Gas turbine failure diagnosis is performed in this work based on seven types of tag data consisting of a total of 7976 data. The data consist of about 7000 normal data and less than 500 abnormal data. While normal data are easy to extract, failure data are difficult to extract. So, this study mainly is composed of normal data and a one-class support vector machine (OC-SVM) is used here, which has an advantage in classification accuracy performance. To advance the classification performance, four hyperparameter tuning (manual search, grid search, random search, Bayesian optimization) methods are applied. To analyze the performance of each technique, four evaluation indicators (accuracy, precision, recall, and F-1 score) are used. As a result, about 54.3% of the initial failure diagnosis performance is improved up to 64.88% through the advanced process in terms of accuracy.

Solar energy is one of the most important renewable energy sources. Photovoltaic (PV) systems, as the most crucial conversion medium for solar energy, have been widely used in recent decades. For PV systems, faults that occur during operation need to be diagnosed and dealt with in a timely manner to ensure the reliability and efficiency of energy conversion. Therefore, an effective fault diagnosis method is essential. Artificial neural networks, a pivotal technique of artificial intelligence, have been developed and applied in many fields including the fault diagnosis of PV systems, due to their strong self-learning ability, good generalization performance, and high fault tolerance. This study reviews the recent research progress of ANN in PV system fault diagnosis. Different widely used ANN models, including MLP, PNN, RBF, CNN, and SAE, are discussed. Moreover, the input attributes of ANN models, the types of faults, and the diagnostic performance of ANN models are surveyed. Finally,... [more]

The microgrids operate in tie-up (TU) mode with the main grid normally, and operate in isolation (IN) mode without the main grid during faults. In a dynamic operational regime, protecting the microgrids is highly challenging. This article proposes a new microgrid protection scheme based on a state observer (SO) aided by a recurrent neural network (RNN). Initially, the particle filter (PF) serves as a SO to estimate the measured current/voltage signals from the corresponding bus. Then, a natural log of the difference between the estimated and measured current signal is taken to estimate the per-phase particle filter deviation (PFD). If the PFD of any single phase exceeds the preset threshold limit, the proposed scheme successfully detects and classifies the faults. Finally, the RNN is implemented on the SO-estimated voltage and current signals to retrieve the non-fundamental harmonic features, which are then utilized to compute RNN-based state observation energy (SOE). The directional a... [more]

This paper proposes a new artificial hummingbird algorithm (AHA)-based framework to investigate the optimal reactive power dispatch (ORPD) problem which is a critical problem in the capacity of power systems. This paper aims to improve the performance of power systems by minimizing two distinct objective functions namely active power loss in the transmission network and total voltage deviation at the load buses subjected to various constraints within multiobjective framework. The proposed AHA-based framework maps the inherent flight and foraging capabilities exhibited by hummingbirds in nature to determine the best settings for the control variables (i.e., voltages at generation buses, the tap positions of on-load tap-changing transformers (OLTCs) and the size of switchable shunt VAR compensators) to minimize the overall objective functions. A multiobjective optimal reactive power dispatch framework (MO-ORPD) considering renewable energy sources (RES) and load uncertainties is also pro... [more]

This review paper looks briefly at conventional approaches and examines the intelligent means for fault diagnosis (FD) and condition monitoring (CM) of electrical drives in detail, especially the ones that are common in Industry 4.0. After giving an overview on fault statistics, standard methods for the FD and CM of rotating machines are first visited, and then its orientation towards intelligent approaches is discussed. Major diagnostic procedures are addressed in detail together with their advancements to date. In particular, the emphasis is given to motor current signature analysis (MCSA) and digital signal processing techniques (DSPTs) mostly used for feature engineering. Consequently, the statistical procedures and machine learning techniques (stemming from artificial intelligence—AI) are also visited to describe how FD is carried out in various systems. The effectiveness of the amalgamation of the model, signal, and data-based techniques for the FD and CM of inductions motors (IM... [more]