The heat storage effect of the tube-embedded slab cooling system (TESCS) makes the intermittent operation feasible, a reasonable intermittent strategy can fully realize the energy saving effect. This paper purposes to optimize the intermittent control schemes for TESCS by simulation. The response of the thermal environment intermittently cooled by TESCS is firstly studied. Then, the intermittent control schemes of TESCS are studied. On the basis of the dual-objective optimization for thermal comfort and energy efficiency, the optimal scheme is established. The results show that the tube-embedded slab has significant heat storage and release characteristics under intermittent cooling condition. Its maximum cooling capacity appears about one hour after the stop of cooling. Reducing the cooling duration can reduce the system energy consumption, but increasing the cooling duration can reduce the system peak load. Twenty-four-hour cooling can reduce the peak load by about 70%, 67%, and 41%,... [more]

The Directive 2010/31/EU on the energy performance of buildings has introduced the standard of “nearly zero-energy buildings” (NZEBs). European requirements place the obligation to reduce energy consumption on all European Union Member States, particularly in sectors with significant energy consumption indicators. Construction is one such sector, as it is responsible for around 40% of overall energy consumption. Apart from a building’s mass and its material and installation solutions, its energy consumption is also affected by its placement relative to other buildings. A proper urban layout can also lead to a reduction in project development and occupancy costs. The goal of this article is to present a method of optimising single-family house complexes that takes elements such as direct construction costs, construction site organisation, urban layout and occupancy costs into consideration in the context of sustainability. Its authors have analysed different proposals of the placement o... [more]

Energy efficiency improvement in industrial companies is an essential prerequisite for the enhancement of their competitive positions in the national and global markets. Yet, the approaches currently employed in respect of the energy management do not fully utilize the innovative potential of energy technologies to achieve strategic goals. One way to further develop energy management is theoretical justification of the use of new approaches based on the suggested concept of the energy saving and energy efficiency processes’ positioning in the system of a company’s management priorities. In this article, we consider the applied use of the developed conceptual approach from the perspective of the energy saving and energy efficiency program development at the company. The main purpose of this paper is to justify the relations between energy management and strategic decision making in industrial companies. The results of the research conducted, firstly, make a certain contribution into the... [more]

Rising demand and limited production of electricity are instrumental in spreading the awareness of cautious energy use, leading to the global demand for energy-efficient buildings. This compels the construction industry to smartly design and effectively construct these buildings to ensure energy performance as per design expectations. However, the research tells a different tale: energy-efficient buildings have performance issues. Among several reasons behind the energy performance gap, occupant behavior is critical. The occupant behavior is dynamic and changes over time under formal and informal influences, but the traditional energy simulation programs assume it as static throughout the occupancy. Effective behavioral interventions can lead to optimized energy use. To find out the energy-saving potential based on simulated modified behavior, this study gathers primary building and occupant data from three energy-efficient office buildings in major cities of Pakistan and categorizes t... [more]

Unmanned Aerial Vehicles (UAVs) have been regarded as a promising means to reshape future wireless communication systems. In this paper, we consider how to plan the trajectory of a solar-powered UAV under a cloudy condition to secure the communication between the UAV and a target ground node against multiple eavesdroppers. We propose a new 3D UAV trajectory optimization model by taking into account the UAV energy consumption, solar power harvesting, eavesdropping and no-fly zone avoidance. A Rapidly-exploring Random Tree (RRT) method is developed to construct the UAV trajectory. Computer simulations and comparisons with a baseline method demonstrate that the proposed method is able to produce trajectories to ensure the valid wireless communication link with the ground node and prevent eavesdropping.

In many regions, the heat used for space heating is a basic item in the energy balance of a building and significantly affects its operating costs. The accuracy of the assessment of heat consumption in an existing building and the determination of the main components of heat loss depends to a large extent on whether the energy efficiency improvement targets set in the thermal upgrading project are achieved. A frequent problem in the case of energy calculations is the lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for a quick technical analysis of measures taken to improve energy efficiency in existing buildings. These methods should have satisfactory results in predicting energy consumption where the input is limited, inaccurate, or uncertain. Therefore, the aim of this work was to test the usefulness of a model based on Rough Set Theory (RST) for estimating the thermal energy... [more]

This paper aims to contribute to the urgent reflection as a society about environmental protection, in the ultimate challenge that is the sustainable use of energy resources. Since Portugal is at an early stage of market development internally, governmental and local stimulation policies play a central role and are a key element in the successful diffusion of Electric Mobility. The study will focus on the transition of a company car fleet, which currently consists of combustion vehicles, to electric vehicles. With this change it becomes necessary to understand how the electrical installation will be affected due to the installation of charging stations, allowing the company to have some autonomy from the public grid. The various changes resulting from the installation consumption profile will be studied and compared. The state of the art, the level of maturity and where the development of electric mobility in Portugal is heading will also be appreciated.

Rooftop gardens ona building have proved to be a good way to improve its storm water management, but many other benefits can be obtained from the installation of these systems, such as reduction of energy consumption, decrease of the heat stress, abatement on CO2 emissions, etc. In this paper, the effect from the presence of these rooftop gardens on abuilding’s energy consumption has been investigated by experimental campaigns using a green roof ona public building in a Mediterranean location in Spain. The obtained results demonstrate a substantial improvement by the installation of the green roof onthe building’s cooling energy demand for a standard summer day, in the order of 30%, and a reduction, about 15%, in the heating energy demand for a winter day. Thus, given the longer duration of the summer conditions along the year, a noticeable reduction on energy demand could be obtained. Simulation analysis, using commercial software TRNSYS code, previously calibrated using experimental... [more]

Today, most countries in the world have mandatory regulations, more or less strict, regarding energy efficiency in buildings. However, a large percentage of the buildings already built were constructed under lax or non-existing regulations in this regard. Therefore, many countries are facing the energy refurbishment of their existing buildings to reduce their carbon footprint. Depending on ambient weather conditions where a building settles, its operation with respect to the achievement of maximum energy efficiency should usually be different. This happens in subtropical climates when, during the year and depending on the season, the building needs to conserve heat, evacuate it or even make an exchange with the outside to take advantage of favorable environmental conditions. This paper presents a complete methodology for conducting building energy efficiency refurbishments in subtropical climates in order to convert them into minimum energy buildings. The proposed methodology is illust... [more]

Targeting existing residential buildings for retrofit improvement presents significant prospects for global reduction of energy-usage and carbon footprints. Energy consumption of the existing single-family building in the hot-humid climate zone needs to be targeted for improvement due to their potential energy-savings and sizeable market share. This paper proposes and evaluates energy savings and cost-effectiveness of a whole building retrofit package for single-family residential buildings built between 1950 and 1970. The study outlined a survey conducted using the clustering data mining technique on Florida Single-Family Residential (SFR) homes to determine the essence of the building envelope, patterns of construction, and Heating, Ventilation, and Air-Conditioning (HVAC) systems. The evaluation of the energy efficiency measures (EEMs) effectiveness is performed utilizing Autodesk Revit and a Six-Step modeled framework. This framework consists of baseline model development, validati... [more]

In this paper is provided a systematic, in-depth, behavioral analysis of renewable energy sources cooperatives’ members. The analysis proved that in, on hand, there was a noticeable difference in the portion of affection of each proposed intervention on the actual energy consumption, which may be to even ten times more in some cases, and on the other hand, the difference in energy consumption between the analyzed groups was noticeable as well. So, implementing energy efficiency interventions of various types, such as technical support, special tariffs, energy generation schemes, and smart meters, seems to lead to substantial energy reductions to even more than 10%, cumulatively, and reduces the environmental footprint. Additionally, the majority of energy efficiency interventions applied by the renewable energy sources cooperatives are proved to be effective in achieving their primary goal, sensitizing members, and leading them to a more efficient energy consumption behavior (“greener”... [more]

The problems of efficient use of energy costs have been actively explored in recent decades in connection with rising energy prices. During this period, the main models for assessing energy efficiency and energy management were developed, including the models Total Quality Management, Six Sigma and Sustainable Value Stream Mapping. The aim of the research was to study the energy efficiency of the production and services in Kazakhstan based on materials of the large-scale national study on the estimation of production and transaction costs by these methodologies. To assess the data obtained, a statistical analysis of the dependence on the indicators of variation and ranking was used. Electricity costs are among the leading manufacturing costs and affect management models. However, according to the maturity model of energy management, energy efficiency in Kazakhstan is low. Despite the government’s declarations of effective energy policies, the administrative burden for businesses remain... [more]

Energy poverty—involving a combination of factors, such as low household incomes, high energy prices, and low levels of residential energy efficiency—is identified as a complex and increasing issue affecting people’s physical health, well-being, and social inclusion. Even though a shared identification of energy poverty is not yet agreed, this phenomenon has been recognized as an EU priority. Several EU legislative documents address the topic, trying to outline its boundaries and provide a framework for mitigative actions. At the same time, different research and demonstration projects have been funded to experiment and evaluate innovative approaches, strategies, and solutions and to promote good practices at national, regional, and local levels. This review paper presents some results of the “ZOOM” project (“Energy zoning for urban systems. Models and relations for the built environment”, funded by University of Bologna in the framework of Alma Idea 2017−ongoing), proposing a critical... [more]

This is an overview of a Key Note lecture; the quote for this lecture is from T.S. Eliot: “We must not cease from exploration and at the end of all our exploring will be to arrive, where we began, and, to know the place for the first time”. This quote highlights that the process of scientific development goes in circles, yet each of them goes above the previous circle, building up the ladder of knowledge. Closing one circle and opening the next may be either be a quiet, unnoticeable event or a roaring loud, scientific revolution. Building science (physics) was started about 100 years ago, but only now are we closing its second circle. Perhaps, because of building physics’ role in the fourth industrial revolution, this discipline itself is undergoing a scientific revolution The first industrial revolution was based on steam generated by burning coal, the second was based on petroleum, and the third on electricity and concentrated electricity production. The current one, i.e., the fourth... [more]

Our paper focuses on the renewable energy and EU 2020 target for energy efficiency in the Czech Republic and Slovakia. We study the reduction of greenhouse gas (GHG) emissions in these two EU Member States through the prism of the Europe 2020 strategy and the 3 × 20 climate and energy package and economic growth (represented by the Gross Domestic Product (GDP) that allows to measure the national dynamics and provide cross-country comparisons) without attributing specific attention to issues such as the electrification of transport or heating, and thence leaving them outside the scope of this paper. Both Czech Republic and Slovakia are two post-Communist countries that still face the consequences of economic transformation and struggle with the optimal management of natural resources. Both countries encountered profound system transformation after 1989 that are apparent in all three measures of sustainable development used in our study. We show that it is unlikely that the planned incre... [more]

A numerical model of a solar wall (SW) with transparent insulation (TI) is proposed in this article. The model is based on the finite-difference method and thermal conductivity equation, with a heat source term for the absorber. Using this model, the energy efficiency of a solar wall with transparent insulation (SW-TI) with honeycomb insulation made of modified cellulose acetate was analyzed in the case of different climatic conditions prevailing in Poland, different orientations of the envelope, and different insulation thicknesses. Simulations were carried out throughout the whole heating period. Monthly energy balances and temperature distributions for the analyzed envelopes at individual moments of the heating period are the basic results of the simulations. It was found that the use of 108 and 88 mm thick insulation was the most recommended in the considered temperate climate. Placing transparent insulation on a wall with an eastern or western orientation caused the annual heat ba... [more]

The quick U-building (QUB) method is used to measure the overall heat loss coefficient of buildings during one to two nights by applying heating power and by measuring the indoor and the outdoor temperatures. In this paper, the numerical model of a real house, previously validated on experimental data, is used to conduct several numerical QUB experiments. The results show that, to some extent, the accuracy of QUB method depends on the boundary conditions (solar radiation), initial conditions (initial power and temperature distribution in the walls) and on the design of QUB experiment (heating power and duration). QUB method shows robustness to variation in the value of the overall heat loss coefficient for which the experiment was designed and in the variation of optimum power for the QUB experiments. The variations in the QUB method results are smaller on cloudy than on sunny days, the error being reduced from about 10% to about 7%. A correction is proposed for the solar radiation abs... [more]

This study evaluates energy efficiency of pastoral (PDFs) and barn (BDFs) dairy farming systems in New Zealand through application of data envelopment analysis (DEA) approach. Two models constant return to scale (CCR) and variable return to scale (BCC) of DEA were employed for determining the technical (TE), pure technical (PTE) and scale (SE) efficiencies of New Zealand pastoral and barn dairy systems. Further, benchmarking was also performed to separate efficient and inefficient dairy farms and energy saving potential was identified for both dairy systems based upon their optimal energy consumption. For this study, the energy inputs data were taken from 50 dairy farms (including PDFs and BDFs) across Canterbury, New Zealand. The results indicated that the average technical, pure technical and scale efficiencies of pastoral (PDFs) dairy systems were 0.84, 0.90, 0.93 and for barn (BDFs) systems were 0.78, 0.84, 0.92, respectively, showing that energy efficiency is slightly better in PD... [more]

In this paper, a method for induction machine (IM) torque/speed tracking control derived from the 3-D non-holonomic integrator including drift terms is proposed. The proposition builds on a previous result derived in the form of a single loop non-linear state controller providing implicit rotor flux linkage vector tracking. This concept was appropriate only for piecewise constant references and assured minimal norm of the stator current vector during steady-states. The extended proposition introduces a second control loop for the rotor flux linkage vector magnitude that can be either constant, programmed, or optimized to achieve either maximum torque per amp ratio or high dynamic response. It should be emphasized that the same structure of the controller can be used either for torque control or for speed control. Additionally, it turns out that the proposed controller can be easily adapted to meet different objectives posed on the drive system. The introduced control concept assures st... [more]

The term “energy efficiency” covers a wide scope and it is affected by a lack of clarity. To overcome this issue, quantitative measures should be defined and evaluated for each unit of product or process considered. These quantitative indicators are necessary to support and evaluate energy efficiency improvements in industry, by allowing to (i) monitor the energy performance, and (ii) perform benchmarking analyses with best available techniques or similar processes. The specific energy consumption (SEC), i.e., the amount of energy consumed per unit of product/output, is the most commonly used index. Because of the uncertain demand faced by companies, production processes run at a rate that can vary within a certain range, to which correspond a different utilization of plants. Energy efficiency investments can be categorized in accordance to how they affect the SEC: i.e., the first group of investments has the same effects for each production rate (e.g., replacement of dated electric mo... [more]

Non-Orthogonal Multiple Access (NOMA) has been proposed recently as an emerging radio access technology for the Fifth Generation (5G) to achieve high spectral efficiency (SE). In addition, simultaneous wireless information and power transfer (SWIPT) has been receiving exceptional attention because of its role in increasing energy efficiency (EE). In this paper, the performance of the downlink SWIPT-NOMA system has been evaluated. In this paper, signal to interference and noise ratio (SINR) is derived for near and far users with outage probability for each user, where the near user acts as an energy harvesting (EH) node. The Genetic algorithm (GA) is used as an optimization technique for the power splitting ratio and power allocation coefficients to maximize the EE under eligible SE. The outage probability for the near and far user is taken into consideration for the optimization process. In this work, the results from the SE−EE metric show that the maximum EE reached 0.325 Mbits/J at S... [more]

The growing popularity of buildings with integrated sub-systems requires a review of methods to optimize the preheating of ventilation air. An integrated system permits using geothermal heat storage parallel to the direct outdoor air intake with additional treatment in the mechanical room as a part of building an automatic control system. The earth−air heat exchanger (EAHX) has many advantages but also has many unanswered questions. Some of the drawbacks are: A possible entry of radon gas, high humidity in the shoulder seasons, and the need for two different air intake sources with a choice that depends on the actual weather conditions. In winter the EAHX may be used continuously to ensure thermal comfort, while in other seasons its operation must be automatically controlled. To generate missing information about EAHX technology we examined two nearly identical EAHX systems, one placed in the ground next to a building and the other under the basement slab. In another project, we reinfo... [more]

Different alternatives are being studied nowadays in order to enhance the behavior of transcritical CO2 refrigeration plants. Among the most studied options, subcooling is one of the most analyzed methods in the last years, increasing cooling capacity and Coefficient Of Performance (COP), especially at high hot sink temperatures. A new cycle, called integrated mechanical subcooling cycle, has been developed, as a total-CO2 solution, to provide the subcooling in CO2 transcritical refrigeration cycles. It corresponds to a promising solution from the point of view of energy efficiency. The purpose of this work is to present, for the first time, thermodynamic analysis of a CO2 refrigeration cycle with integrated mechanical subcooling cycle from first and second law approaches. Using simplified models of the components, the optimum operating conditions, optimum gas-cooler pressure, and subcooling degree are determined in order to obtain the maximum COP. The main energy parameters of the sys... [more]

Underwater deployed sensors nodes are energy-constrained. Therefore, energy efficiency becomes crucial in underwater wireless sensor networks (U-WSNs). The adverse channel corrupts the packets and challenges their reliability. To handle these challenges, two routing schemes are introduced in this paper. They are effective energy and reliable delivery (EERD) and cooperative effective energy and reliable delivery (CoEERD). In EERD, the packets follow single-path routing and the best forwarder node is selected using a weight function such that packets are transferred via the reliable paths with low energy usage. Packet transfer via a single route in EERD has, however, compromised reliability as the undersea links bear harshness and unpredictability. Therefore, the CoEERD scheme adds cooperative routing to EERD, in which a relay node is introduced between a source−destination pair. The destination requests the relay when the packets it gets from the source are corrupted beyond a threshold... [more]

Confronting an energy crisis, the government of Ghana enacted a power factor correction policy in 1995. The policy imposes a penalty on large-scale electricity users, namely, special load tariff (SLT) customers of the Electricity Company of Ghana (ECG), whose power factor is below 90%. This paper investigates the impact of this policy on these firms’ power factor improvement by using panel data from 183 SLT customers from 1994 to 1997 and from 2012. To avoid potential endogeneity, this paper adopts a regression discontinuity design (RDD) with the power factor of the firms in the previous year as a running variable, with its cutoff set at the penalty threshold. The result shows that these large-scale electricity users who face the penalty because their power factor falls just short of the threshold are more likely to improve their power factor in the subsequent year, implying that the power factor correction policy implemented by Ghana’s government is effective.