In mining and post-mining areas, the assessment of the risks to the surface and its infrastructure from the opening or closed mine is of the utmost importance; particular attention should be paid to mine shafts. The risks include the occurrence of undetected voids or loosening zones in the rock mass. Their detection makes it possible to prevent their impact on a mine shaft and surface infrastructure. Geophysical methods, and in particular, a microgravity method lend themselves for the detection of changes in the distribution of masses (i.e., the density) due to voids and loosening zones. The paper presents the results of surface microgravity surveys in the vicinity of three mine shafts: under construction, working, and a liquidated one. Based on the gravity anomalies, the density distribution of the rock mass for all three cases was recognized. The properties of the anomalies allowed to determine which of the identified decreased density zones may pose a threat to the surface infrastru... [more]

Due to the availability of smart metering infrastructure, high-resolution electric consumption data is readily available to study the dynamics of residential electric consumption at finely resolved spatial and temporal scales. Analyzing the electric consumption data enables the policymakers and building owners to understand consumer’s demand-consumption behaviors. Furthermore, analysis and accurate forecasting of electric consumption are substantial for consumer involvement in time-of-use tariffs, critical peak pricing, and consumer-specific demand response initiatives. Alongside its vast economic and sustainability implications, such as energy wastage and decarbonization of the energy sector, accurate consumption forecasting facilitates power system planning and stable grid operations. Energy consumption forecasting is an active research area; despite the abundance of devised models, electric consumption forecasting in residential buildings remains challenging due to high occupant ene... [more]

Multiple applications of sensor devices in the form of a Wireless Sensor Network (WSN), such as those represented by the Internet of Things and monitoring dangerous geographical spaces, have attracted the attention by several scientific communities. Despite their interesting properties, sensors present an adverse characteristic: they manage very limited energy. Under such conditions, saving energy represents one of the most important concepts in designing effective protocols for WSNs. The objective of a protocol is to increase the network lifetime through the reduction of energy consumed by each sensor. In this paper, a robust clustering routing protocol for WSNs is introduced. The scheme uses the Locust Search (LS-II) method to determine the number of cluster heads and to identify the optimal cluster heads. Once the cluster heads are recognized, the other sensor elements are assigned to their nearest corresponding cluster head. Numerical simulations exhibit competitive results and dem... [more]

The aim of the article is to present and analyze the implementation of intelligent lighting within the concept of smart energies and smart cities. Motivation and research hypothesis: Electricity consumption in the world is based largely on non-renewable energy. Until these full changes, it is necessary to look for opportunities to save and use it efficiently. Today’s cities are increasingly implementing the smart concept, of which smart energy is one area. One of the smart city elements implemented by cities is smart energy. Within this framework, a supported concept is the replacement of traditional lighting with LEDs (Light-Emitting Diodes), which contributes to energy and cost savings and reduces the pollution of the sky with artificial light, while increasing the efficiency of urban lighting. Positive effects of modern solutions include reduced lighting expenses and increased safety of residents. Methods and results of the research: The authors chose the case study method for their... [more]

Energy generation and consumption in the power grid must be balanced at every single moment. Within the synchronous area of continental Europe, flexible generators and loads can provide Frequency Containment Reserve and Frequency Restoration Reserve marketed through the balancing markets. The Transmission System Operators use these flexibilities to maintain or restore the grid frequency when there are deviations. This paper shows the future flexibility potential of Germany’s household sector, in particular for single-family and twin homes in 2025 and 2030 with the assumption that households primarily optimize their self-consumption. The primary focus is directed to the flexibility potential of Electric Vehicles, Heat Pumps, Photovoltaics and Battery Storage Systems. A total of 10 different household system configurations were considered and combined in a weighted average based on the scenario framework of the German Grid Development Plan. The household generation, consumption and stora... [more]

Georgian forests are very valuable natural resources, but due to the lack of affordable alternatives to firewood, people are forced to use forest resources illegally and unsustainably. The aim of this study was to determine the productivity and biomass properties of four poplar clones from Aigeiros and Tacamahaca and one control clone, considering their wood and bark characteristics and their proportion in the stems. Short-rotation woody crops with these clones represent a potential source of commercial fuelwood production in Georgia as an alternative to natural forests. These tree characteristics were evaluated after three years of growth. The survival of the clones was generally high. No significant differences in biomass production (dry matter, DM) were found among the four clones tested (DM of approximately 4 Mg ha−1 yr−1), while the control clone achieved significantly lower values for DM. The biomass specific density was exceptionally high, at 481−588 kg m−3, which was a result o... [more]

This study was aimed at identifying the causes of continuous failures, fires, and explosions of electrical and electronic systems in educational facilities that result from lightning, which occurs frequently during the summer. The study is also aimed at suggesting prevention measures for such damage. The installation status and problems of lightning protection systems (LPSs) were examined by analyzing the damage compensation data of the Korea Institute of Educational Facility Safety, a questionnaire and field survey, and related laws. A total of 49,989 educational facilities responded to the questionnaire. The survey indicated that out of all the educational facilities, 21% had external LPSs, 6.2% had internal LPSs, 4% had both internal and external LPSs, and only 2.5% had installed bonding in addition to internal and external LPSs. The LPSs were not installed properly because the heights of most educational facilities are less than 20 m although the Building Act stipulates that LPSs s... [more]

The paper’s main purpose was to identify the level and factors influencing the consumption of bioenergy of agricultural origin in agriculture in EU countries. All EU countries were deliberately selected for research, as of 31 December 2018. The research period covered the years 2004 to 2018. The sources of materials were the subject literature, Eurostat data, and IEA (International Energy Agency) data. The following methods were used for the analysis and presentation of materials: descriptive, tabular, graphical, Gini concentration coefficient, Lorenz concentration curve, descriptive statistics, Kendall’s tau correlation coefficient and Spearman’s rank correlation coefficient. In the EU, there was a high level of concentration of renewable energy consumption in several countries. There was also no change in the use of bioenergy of agricultural origin in agriculture, but the concentration level was low. The degree of concentration has not changed for both parameters of renewable energy... [more]

Cyanobacterial blooms and strains absorb carbon dioxide, drawing attention to its use as feed for animals and renewable energy sources. However, cyanobacteria can produce toxins and have a low heating value. Herein, we studied a cyanobacterial strain harvested during a bloom event and analyzed it to use as animal feed and a source of energy supply. The thermal properties and the contents of total nitrogen, protein, carbohydrate, fatty acids, lipid, and the presence of cyanotoxins were investigated in the Microcystis aeruginosa LTPNA 01 strain and in a bloom material. Microcystins (hepatotoxins) were not detected in this strain nor in the bloom material by liquid chromatography coupled to mass spectrometry. Thermogravimetric analysis showed that degradation reactions (devolatilization) initiated at around 180 °C, dropping from approximately 90% to 20% of the samples’ mass. Our work showed that despite presenting a low heating value, both biomass and non-toxic M. aeruginosa LTPNA 01 coul... [more]

Local flexibility markets (LFMs) are a market-based concept to integrate distributed energy resources into congestion management. However, the activation of flexibility for storage-based flexibility changes the respective state of charge. Compensation in later points of time is needed to regain the original flexibility potential. Therefore, we propose a LFM bid formulation including both flexibility and compensation. Furthermore, flexibility market participation might lead to inc-dec-gaming, i.e., congestion-increasing behavior to maximize profits. However, this inc-dec-gaming might lead to electricity market schedule deviations if LFM offers are not activated. We propose a risk-averse modeling formulation considering the potential non-activation of LFM bids to provide a framework for the assessment of LFM participation comparing different approaches. Our exemplary case studies demonstrate the proposed LFM bid formulation and show the impact of LFM participation modeling on inc-dec-gam... [more]

Li-ion capacitors (LICs) are designed to achieve high power and energy densities using a carbon-based material as a positive electrode coupled with a negative electrode often adopted from Li-ion batteries. However, such adoption cannot be direct and requires additional materials optimization. Furthermore, for the desired device’s performance, a proper design of the electrodes is necessary to balance the different charge storage mechanisms. The negative electrode with an intercalation or alloying active material must provide the high rate performance and long-term cycling ability necessary for LIC functionality—a primary challenge for the design of these energy-storage devices. In addition, the search for new active materials must also consider the need for environmentally friendly chemistry and the sustainable availability of key elements. With these factors in mind, this review evaluates advanced and emerging materials used as high-rate anodes in LICs from the perspective of their pra... [more]

Sliding mode control strategies are well known for ensuring robustness of the system with respect to disturbance and model uncertainties. For continuous-time plants, they achieve this property by confining the system state to a particular hyperplane in the state space. Contrary to this, discrete-time sliding mode control (DSMC) strategies only drive the system representative point to a certain vicinity of that hyperplane. In established literature on DSMC, the width of this vicinity has always been strictly greater than zero in the presence of uncertainties. Thus, ideal sliding motion was considered impossible for discrete-time systems. In this paper, a new approach to DSMC design is presented with the aim of driving the system representative point exactly onto the sliding hyperplane even in the presence of uncertainties. As a result, the quasi-sliding mode band width is effectively reduced to zero and ideal discrete-time sliding motion is ensured. This is achieved with the proper sele... [more]

A new single-input multiple-output (SIMO) converter is proposed in this work by incorporating flyback and buck converters in a master−slave configuration. The objective of this work is to address the cross regulation problem, achieve tight voltage regulation, improve the circuit form factor and attain a fast transient response for a SIMO flyback converter. The flyback converter maintains the output channels within 10% of their rated voltages and the SIMO buck converter is placed in series with the flyback converter such that it compensates for the output voltage deviation. Moreover, a time multiplexing switching scheme decouples output channel to eliminate the cross-regulation problem and remove the need for an additional winding transformer per each output channel. A type II compensator with a peak current mode controller was designed to achieve faster transient response which is critical for the proposed configuration. A thorough steady-state analysis was carried out on a triple outp... [more]

This paper presents a series of experiments on the effectiveness of existing mechanical ventilation systems during accidental hydrogen releases in confined spaces, such as underground garages. The purpose was to find the mass flow rate limit, hence the TPRD diameter limit, that will not require a change in the ventilation system. The experiments were performed in a 40 ft ISO container in Norway, and hydrogen gas was used in all experiments. The forced ventilation system was installed with a standard 315 mm diameter outlet. The ventilation parameters during the investigation were British Standard with 10 ACH and British Standard with 6 ACH. The hydrogen releases were obtained through 0.5 mm and 1 mm nozzles from different hydrogen reservoir pressures. Both types of mass flow, constant and blowdown, were included in the experimental matrix. The analysis of the hydrogen concentration of the created hydrogen cloud in the container shows the influence of the forced ventilation on hydrogen r... [more]

The aim of the study is to present a methodology for analyzing pollution emissions in a medium-sized city using modern traffic simulations in the aspect of minimizing exhaust emissions. The scope of the research and the methods of analysis used differ from those applied in big cities projects that can be found in the literature, Therefore the progressive elaboration model has been applied methodically to formulate and carry out the feasibility study. To perform microscopic traffic simulations, the software Simulation of Urban Mobility (SUMO—German Aerospace Center (DLR), Berlin, Germany) was applied. Thanks to the simulations, changes in traffic organization were accurately identified in the context of pollution emissions before they were implemented. The proposed approach allows a smooth flow of vehicles and a reduction of exhaust emissions. The experiments, supported by visual modelling of traffic with respect to pollution emissions, were performed on one of the main arteries of the... [more]

Two-tank metal hydride pairs have gained tremendous interest in thermal energy storage systems for concentrating solar power plants or industrial waste heat recovery. Generally, the system’s performance depends on selecting and matching the metal hydride pairs and the thermal management adopted. In this study, the 2D mathematical modeling used to investigate the heat storage system’s performance under different thermal management techniques, including active and passive heat transfer techniques, is analyzed and discussed in detail. The change in the energy storage density, the specific power output, and the energy storage efficiency is studied under different heat transfer measures applied to the two tanks. The results showed that there is a trade-off between the energy storage density and the energy storage efficiency. The adoption of active heat transfer enhancement (convective heat transfer enhancement) leads to a high energy storage density of 670 MJ m−3 (close to the maximum theor... [more]

The constant increase in electrical energy consumption has led to a growth of photovoltaic installations (PV) along with the corresponding power converters for proper operation. Power electronics converters represent a challenge to maintain the system’s performance and safety; one such problem is series DC Arc Fault (AF). DC AFs lead to fire risk, damaging the main bus and the loads when not detected and interrupted in time. Therefore, research about DC AFs in power electronics converters must be carried out to predict the behavior and help avoid damage to the system. In this work, an innovative hybrid multilevel inverter for PV applications is used to explore the effect of series DC AFs in the converters’ internal signals, with the aims of setting the bases for the development of a detection system for power electronics. Both stages of conversion (DC/DC and DC/AC) are presented. In addition, the placement of the MPPT converter was considered for the tests. The AF experimental tests we... [more]

Deep learning has already been successfully used in the development of decision support systems in various domains. Therefore, there is an incentive to apply it in other important domains such as agriculture. Fertilizers, electricity, chemicals, human labor, and water are the components of total energy consumption in agriculture. Yield estimates are critical for food security, crop management, irrigation scheduling, and estimating labor requirements for harvesting and storage. Therefore, estimating product yield can reduce energy consumption. Two deep learning models, Long Short-Term Memory and Gated Recurrent Units, have been developed for the analysis of time-series data such as agricultural datasets. In this paper, the capabilities of these models and their extensions, called Bidirectional Long Short-Term Memory and Bidirectional Gated Recurrent Units, to predict end-of-season yields are investigated. The models use historical data, including climate data, irrigation scheduling, and... [more]

Currently, intensive work is underway in Poland to increase the share of renewable energy sources in the overall energy balance. Therefore, this paper presents the possibilities of using concentrated solar power in zones with a temperate climate. A simplified model based on the energy balance in the solar collectors considering the main operating parameters of the typical solar power plant was developed. It should be noted here that the model does not take into account issues related to heat accumulation and electricity generation in a Solar Thermal Power Station. The simulation of forced convection inside the solar collector absorber was additionally included in the calculations to improve its accuracy. The model was verified using actual heat measurements at the outlet of the parabolic collector installation at a Solar Thermal Power Station located in the south of Spain. The heat generated by a similar solar collector system in a selected region with a temperate climate, the city of... [more]

The interest in renewable energy to replace fossil fuel is increasing as the problem caused by climate change has become more severe. In this study, small hydropower (SHP) was evaluated as a resource with high development value because of its high energy density compared to other renewable energy sources. SHP may be an attractive and sustainable power generation environmental perspective because of its potential to be found in small rivers and streams. The power generation potential could be estimated based on the discharge in the river basin. Since the river discharge depends on the climate conditions, the hydropower generation potential changes sensitively according to climate variability. Therefore, it is necessary to analyze the SHP potential in consideration of future climate change. In this study, the future prospect of SHP potential is simulated for the period of 2021 to 2100 considering the climate change in three hydropower plants of Deoksong, Hanseok, and Socheon stations, Ko... [more]

Sewage sludge hydrochars (SSHs), which are produced by hydrothermal carbonization (HTC), offer a high calorific value to be applied as a biofuel. However, HTC is a complex processand the properties of the resulting product depend heavily on the process conditions and feedstock composition. In this work, we have applied artificial neural networks (ANNs) to contribute to the production of tailored SSHs for a specific application and with optimum properties. We collected data from the published literature covering the years 2014−2021, which was then fed into different ANN models where the input data (HTC temperature, process time, and the elemental content of hydrochars) were used to predict output parameters (higher heating value, (HHV) and solid yield (%)). The proposed ANN models were successful in accurately predicting both HHV and contents of C and H. While the model NN1 (based on C, H, O content) exhibited HHV predicting performance with R2 = 0.974, another model, NN2, was also able... [more]

Compensation is key to an inductive power transfer (IPT) system in terms of voltage transfer function and efficiency optimization. Basic compensation is simple, but not suitable, for the achievement of variable load-independent voltage-gains without changing the design of the loosely-coupled transformer (LCT). On the other hand, higher-order compensation circuits enable greater design freedom to achieve variable load-independent voltage-gains while keeping the LCT unchanged, but it requires a variety of compensation components, especially the inductive components, which incur significant copper and core losses. This paper proposes a comprehensive design of the series/series-parallel (S/SP) IPT system. The design methodology for variable load-independent voltage-gains is studied to keep the LCT unchanged and achieve zero phase angle input over the whole load range. Design consideration includes the effect of misalignment issue on the voltage-gain and, thus, a design criteria can be deri... [more]

Penetration of equipment such as photovoltaic power generations (PV), heat pump water heaters (HP), and electric vehicles (EV) introduces voltage unbalance issues in distribution systems. Controlling PV and energy storage system (ESS) outputs or coordinated EV charging are investigated for voltage unbalance compensation. However, some issues exist, such as dependency on installed capacity and fairness among consumers. Therefore, the ideal way to mitigate unbalanced voltages is to use grid-side equipment mainly. This paper proposes a voltage unbalance compensation based on optimal tap operation scheduling of three-phase individual controlled step voltage regulators (3ϕSVR) and load ratio control transformer (LRT). In the formulation of the optimization problem, multiple voltage unbalance metrics are comprehensively included. In addition, voltage deviations, network losses, and coordinated tap operations, which are typical issues in distribution systems, are considered. In order to inves... [more]

This paper discusses the use of a stochastic metaheuristic population-based optimization algorithm known as the sine cosine algorithm (SCA) to design the parameters of a power system stabilizer (PSS) for damping electromechanical oscillations in a single machine connected to a large power system. The design of the PSS parameters was formulated as an optimization problem to minimize the objective function value. The SCA was used to obtain the best values of the PSS parameters under the objective function. Simulation was carried out by a linearized power system model. The lead lag controller was used as the PSS structure and the results from that were compared with those obtained by moth flame optimization and evolutionary programming. The results showed that the SCA is more effective than are the other techniques in exploration and exploitation to tune the PSS parameters and enhance the power system stability by damping oscillations in a range of loading conditions.

In this paper, we experimentally investigated two high temperature polymer electrolyte membrane fuel cell (HT-PEMFC) stacks for their response to the presence of reformate impurities in an anode gas stream. The investigation was aimed at characterizing the effects of reformate impurities at the stack level, including in humidified conditions and identifying fault features for diagnosis purposes. Two HT-PEMFC stacks of 37 cells each with active areas of 165 cm2 were used with one stack containing a pre-doped membrane with a woven gas diffusion layer (GDL) and the other containing a post-doped membrane with non-woven GDL. Polarization curves and galvanostatic electrochemical impedance spectroscopy (EIS) were used for characterization. We found that both N2 dilution and impurities in the anode feed affected mainly the charge transfer losses, especially on the anode side. We also found that humidification alleviated the poisoning effects of the impurities in the stack with pre-doped membra... [more]