In isolated areas such as islands with small power grids, the BESS (Battery energy storage system) can supply the standard voltage and frequency to the power system to achieve 100% of renewable sharing. In addition, the installation of additional BESS may be required in the microgrid due to technical limitations such as redundant operation and manufacturer specifications. Thus, the BESSs in a microgrid can be split into main and sub BESSs which play a role as the main source and auxiliary services, respectively. Generally, the ratio of unbalance current in microgrid system tends to be high, because of inherently unbalanced single phase load distribution. However, because the capacity of BESS is calculated under balanced conditions, the PCS (Power conversion system) of BESS may stop protecting its switching device from a single phase overcurrent in actual operation. From this perspective, this paper proposes that the sub BESSs perform dual current control to supply the unbalanced curren... [more]

Currently, international business and society are on the eve of large-scale changes. The study aims to develop a methodological approach to assess the energy flexibility of multinational corporations in the context of the structural transformation management of renewable energy production. The methodology of this study is based on a comprehensive approach, which includes the methodology of the United States Agency for International Development (USAID), diagnostics of the level of development and energy flexibility of multinational corporations, regression analysis and scenario modeling. In particular, scenario analysis of renewable energy development in countries of the Commonwealth of Independent States (CIS) and economic analysis of projects for the development of corporate renewable energy industry were carried out. The results showed that the Russian renewable energy business is flexible enough for changes; however, at the same time, changes are needed in the national legislation,... [more]

The residential sector has become the second largest energy consumer in China. Urban residential energy consumption (URE) in China is growing rapidly in the process of urbanization. This paper aims to reveal the spatiotemporal dynamic evolution and influencing mechanism of URE in China. The spatiotemporal heterogeneity of URE during 2007−2018 is explored through Kernel density estimation and inequality measures (i.e., Gini coefficient, Theil index, and mean logarithmic deviation). Then, with several advantages over traditional index decomposition analysis approaches, the Generalized Divisia Index Method (GDIM) decomposition is employed to investigate the impacts of eight driving factors on URE. Furthermore, the national and provincial decoupling relationships between URE and residential income increase are studied. It is found that different provinces’ URE present a significant agglomeration effect; the interprovincial inequality in URE increases and then decreases during the study per... [more]

The current research focuses on assessing the potential of municipal solid waste (MSW) conversion into biofuel using pyrolysis process. The MSW samples were taken from Zaatari Syrian Refugee Camp. The physical and chemical characteristics of MSW were studied using proximate and elemental analysis. The results showed that moisture content of MSW is 32.3%, volatile matter (VM) is 67.99%, fixed carbon (FC) content is 5.46%, and ash content is 24.33%. The chemical analysis was conducted using CHNS analyzer and found that the percentage of elements contents: 46% Carbon (C) content, 12% Hydrogen (H2), 2% Nitrogen (N2), 44% Oxygen (O2), and higher heat value (HHV) is 26.14 MJ/kg. The MSW pyrolysis was conducted using tubular fluidized bed reactor (FBR) under inert gas (Nitrogen) at 500 °C with 20 °C/min heating rate and using average particles size 5−10 mm. The products of MSW pyrolysis reaction were: pyrolytic liquid, solid char, and gaseous mixture. The pyrolytic oil and residual char were... [more]

In recent years, the vast penetration of renewable energy sources has introduced a large degree of uncertainty into the power system, thus leading to increased trading activity in the continuous intra-day electricity market. In this paper, we propose an agent-based modeling framework to analyze the behavior and the interactions between renewable energy sources, consumers and thermal power plants in the European Continuous Intra-day (CID) market. Additionally, we propose a novel adaptive trading strategy that can be used by the agents that participate in CID market. The agents learn how to adapt their behavior according to the arrival of new information and how to react to changing market conditions by updating their willingness to trade. A comparative analysis was performed to study the behavior of agents when they adopt the proposed strategy as opposed to other benchmark strategies. The effects of unexpected outages and information asymmetry on the market evolution and the market liqu... [more]

This particular research was conducted with the aim of describing the impact of a rotating nanoliquid on an elasting surface. This specific study was carried out using a two-phase nanoliquid model. In this study engine oil is used as the base fluid, and two forms of nanoparticles are used, namely, titanium oxide and zinc oxide (TiO2 and ZnO). Using appropriate similarity transformations, the arising system of partial differential equations and the related boundary conditions are presented and then converted into a system of ordinary differential equations. These equations are numerically tackled using powerful techniques. Graphs for nanoparticle rotation parameter and volume fraction for both types of nanoparticles present the results for the velocity and heat transfer features. Quantities of physical significance are measured and evaluated, such as local heat flux intensity and local skin friction coefficients at the linear stretching surface. Numerical values for skin friction and lo... [more]

In this work, the integration of a grid-scale ternary-Pumped Thermal Electricity Storage (t-PTES) with a nuclear power generation to enhance operation flexibility is assessed using physics-based models and digital real time simulation. A part of the electricity from the nuclear power generation is delivered to the grid, and the balance is used to power a heat pump that can be augmented by an auxiliary resistive load element to increase the charging rate of the thermal storage. This increases the thermal potential between hot and cold thermal stores (usually solid materials or molten salts inside large storage tanks). The thermal energy is transformed back into electricity by reversing the heat pump cycle. Different transient scenarios including startup, shutdown, and power change for grid-connected operation are simulated to determine the behavior of the hybrid nuclear-t-PTES system operating under variable loads that constitute a departure from conventional, baseload nuclear plant ope... [more]

The development of new control techniques for multiphase induction machines (IMs) has become a point of great interest to exploit the advantages of these machines compared to three-phase topology, for example, the reduced phase currents and lower harmonic contents. One of the most analyzed techniques is the model-based predictive current control (MPC) with a finite control set. This technique presents high x−y currents because of the application of one switching state throughout the whole sampling period. Nevertheless, it is one of the most used due to its excellent dynamic response. To overcome the aforementioned drawbacks, new techniques called virtual vectors have been developed, but although there are several articles with experimental results, the algorithm for implementing the technique has not been appropriately described. This document provides a clear and detailed explanation for algorithm implementation of virtual vectors through two proposed variants VV4 and VV11, in a six-p... [more]

Anaerobic digestion (AD) can bring benefits in terms of effective management of organic waste, recovery of nutrients and energy recovery, and is consistent with circular economy principles. AD has been promoted and implemented worldwide, but at widely differing scales, influenced by the availability and location of feedstocks. In developing countries, feedstock arises from small- to medium-scale agriculture and agro-processing operations, as well as from household and municipal waste. Biogas produced from residues from agro-processing facilities may be used for on-site heat and power, but the lack of a gas and electricity grid infrastructure can limit opportunities to distribute gas or generated electricity to wider users. This paper presents the findings of the first study to consider novel technologies for small-scale and low-cost biogas clean-up into biomethane, and compression into small bottles, suitable as a clean cooking fuel. The paper reports on the initial evaluation of biome... [more]

In this paper, a strategy for reducing the electromagnetic interferences induced by power lines on metallic pipelines is proposed and numerically investigated. The study considers a set of steel conductors interposed between the power line and the pipeline. Different shapes of conductor cross sections and different magnetic permeabilities are considered, to identify the solution exhibiting the greatest mitigation efficiency for the same amount of material. The investigation is carried out by means of a quasi-3D finite element analysis. Results show that the main mechanism responsible for the mitigation is constituted by the currents induced in the screening conductors by the power line. Hence, a high magnetic permeability can have a detrimental effect since it reduces the skin depth to values below the size of the screening conductor. In this case, a reduction of the screening current and in the mitigation efficiency is observed. Nevertheless, the study shows that the use of strip-shap... [more]

In this paper, we propose a method for the identification of the differential inductance of saturable ferrite inductors adopted in DC−DC converters, considering the influence of the operating temperature. The inductor temperature rise is caused mainly by its losses, neglecting the heating contribution by the other components forming the converter layout. When the ohmic losses caused by the average current represent the principal portion of the inductor power losses, the steady-state temperature of the component can be related to the average current value. Under this assumption, usual for saturable inductors in DC−DC converters, the presented experimental setup and characterization method allow identifying a DC thermal steady-state differential inductance profile of a ferrite inductor. The curve is obtained from experimental measurements of the inductor voltage and current waveforms, at different average current values, that lead the component to operate from the linear region of the ma... [more]

Solar energy has been one of the accessible and affordable renewable energy technologies for the last few decades. Photovoltaics and solar thermal collectors are mature technologies to harness solar energy. However, the efficiency of photovoltaics decays at increased operating temperatures, and solar thermal collectors suffer from low exergy. Furthermore, along with several financial, structural, technical and socio-cultural barriers, the limited shadow-free space on building rooftops has significantly affected the adoption of solar energy. Thus, Photovoltaic Thermal (PVT) collectors that combine the advantages of photovoltaic cells and solar thermal collector into a single system have been developed. This study gives an extensive review of different PVT systems for residential applications, their performance indicators, progress, limitations and research opportunities. The literature review indicated that PVT systems used air, water, bi-fluids, nanofluids, refrigerants and phase-chang... [more]

A significant proportion of the total energy consumption in office buildings is attributable to lighting. Enhancements in energy efficiency are currently achieved through strategies to reduce artificial lighting by intelligent daylight utilization. Control strategies in the field of daylighting and artificial lighting are mostly rule-based and focus either on comfort aspects or energy objectives. This paper aims to provide an overview of published scientific literature on enhanced control strategies, in which new control approaches are critically analysed regarding the fulfilment of energy efficiency targets and comfort criteria simultaneously. For this purpose, subject-specific review articles from the period between 2015 and 2020 and their research sources from as far back as 1978 are analysed. Results show clearly that building controls increasingly need to address multiple trades to achieve a maximum improvement in user comfort and energy efficiency. User acceptance can be highligh... [more]

Peer-to-Peer (P2P), Transactive Energy (TE) and Community Self-Consumption (CSC) are exciting energy generation and use models, offering several opportunities for prosumers, micro-grids and services to the grid; however, they require numerous components to function efficiently. Various hardware devices are required to transmit data and control the generation and consumption equipment, whereas software is needed to use the gathered information to monitor and manage the hardware and energy trading. Data can be gathered from a variety of origins from within the grid and external sources; however, these data must be well-structured and consistent to be useful. This paper sets out to gather information regarding the hardware, software and data from the several archetypes available, focusing on existing projects and trials in these areas to see what the most-common hardware, software and data components are. The result presents a concise overview of the hardware, software and data-related to... [more]

The aquatic plant Pistia stratiotes L. is environmentally hazardous and requires effective methods for its utilization. The harmfulness of these plants is determined by their excessive growth in water bodies and degradation of local aquatic ecosystems. Mechanical removal of these plants is widespread but requires fairly resource-intensive technology. However, these aquatic plants are polymer-containing substrates and have a great potential for conversion into bioenergy. The aim of the work was to determine the main patterns of Pistia stratiotes L. degradation via granular microbial preparation (GMP) to obtain biomethane gas while simultaneously detoxifying toxic copper compounds. The composition of the gas phase was determined via gas chromatography. The pH and redox potential parameters were determined potentiometrically, and Cu(II) concentration photocolorimetrically. Applying the preparation, high efficiency of biomethane fermentation of aquatic plants and Cu(II) detoxification were... [more]

An inverter, whose inductor current is periodic, is the key equipment for photovoltaic power generation, fuel cell power generation, etc. A nonlinear inductor, whose inductance will be changed by its current, can be used to improve the grid current quality of the inverter, although making the mathematical model of the inverter system more complex. In this paper, the voltage-controlled full-bridge inverter with a nonlinear inductor is investigated and its mathematical model is established. The influence of parameters on the dynamical behaviors of this system is analyzed by using the harmonic balance method and the Floquet theory. Consequently, the mechanism for the occurrence of medium-frequency oscillation is revealed. The hardware circuit for the voltage-controlled full-bridge inverter with a nonlinear inductor is designed and some experimental results are presented for confirmation. The research results show that the mechanism for the occurrence of medium-frequency oscillation is Hop... [more]

Twenty percent of global electricity supplied to the buildings is used for preventing air temperature increase; its consumption for this prevention will triple by 2050 up to China’s present needs. Heat removed from the thermal power plants may drive cold generation in the absorption devices where mass and heat transfer are two-phase phenomena; hence liquid film break-up into the rivulets is extensively investigated, which needs knowledge of the velocity profiles. Laminar flow in a pipe is used in the preliminary study, velocity profile of developed flow is used as a benchmark. The study account writes the applied apparatus with their calibration procedure, and the uncertainty estimation algorithm. The calibration regression line with the slope close to one and a high Pearson’s coefficient value is the final outcome. Therefore, the apparatus may be applied in the principal research.

Home energy monitoring has recently become a very important issue and a means to reduce energy consumption in the residential sector. Sensors and control systems are deployed at various locations in a house and an intelligent system is used to efficiently manage the consumed energy. Low power communication systems are used to provide low power consumption from a smart meter. Several of these systems are battery operated. Other systems use AC/DC adapters to supply power to sensors and communication systems. However, even using low-power technology, such as ZigBee, the power consumption of a router can be high because it must always be powered on. In this work, to evaluate power consumption, a system for monitoring energy usage and indoor air quality was developed. A technique is proposed to efficiently supply power to the components of the system. All sensor nodes are battery operated, and relays are used to control the battery charging process. In addition, an energy harvesting system... [more]

Power production from coal combustion is one of two major anthropogenic sources of mercury emission to the atmosphere. The aim of this study is the analysis of the carbon footprint of mercury removal technologies through sorbents injection related to the removal of 1 kg of mercury from flue gases. Two sorbents, i.e., powdered activated carbon and the coke dust, were analysed. The assessment included both direct and indirect emissions related to various energy and material needs life cycle including coal mining and transport, sorbents production, transport of sorbents to the power plants, and injection into flue gases. The results show that at the average mercury concentration in processed flue gasses accounting to 28.0 µg Hg/Nm3, removal of 1 kg of mercury from flue gases required 14.925 Mg of powdered activated carbon and 33.594 Mg of coke dust, respectively. However, the whole life cycle carbon footprint for powdered activated carbon amounted to 89.548 Mg CO2-e·kg−1 Hg, whereas for c... [more]

This article presents an estimation method of the BLDC rotor position with asymmetrically arranged Hall sensors. Position estimation is necessary to control the motor by methods other than block commutation. A sinusoidal control method was selected for the research, which significantly reduces torque ripples and acoustic noise and is quite simple to implement. Inaccurate performance of the elements determining the position of the BLDC motor rotor causes a large error in the position estimation and has a negative impact on the operation of the drive controlled in this way. Using the developed control algorithms, it is possible to correctly determine the mechanical position of the rotor even for multi-pole motors. The proposed method is relatively easy to implement and does not require modification of control systems, being limited to changes only in the software of such devices. The tests of the actual system clearly show the usefulness of such a control method and its effectiveness.

Power flow analysis is an inevitable methodology in the planning and operation of the power grid. It has been performed for the transmission system, however, along with the penetration of the distributed energy resources, the target has been expanded to the distribution system as well. However, it is not easy to apply the conventional method to the distribution system since the essential information for the power flow analysis, say the impedance and the topology, are not available for the distribution system. To this end, this paper proposes an alternative method based on practically available parameters at the terminal nodes without the precedent information. Since the available information is different between high-voltage and low-voltage systems, we develop two various machine learning schemes. Specifically, the high-voltage model incorporates the slack node voltage, which can be practically obtained at the substation, and yields a time-invariant model. On the other hand, the low vo... [more]

This paper investigates the maximum photovoltaic (PV) penetration limits on both overhead lines and underground cables medium voltage radial distribution system. The maximum PV penetration limit is estimated considering both bus voltage limit (1.05 p.u.) and feeder current ampacity (1 p.u.). All factors affect the max PV penetration limit are investigated in detail. Substation voltage, load percentage, load power factor, and power system frequency (50 Hz or 60 Hz) are analyzed. The maximum PV penetration limit associated with overhead lines is usually higher than the value associated with the underground cables for high substation voltage (substation voltage = 1.05 and 1.04 p.u.). The maximum PV penetration limit decreases dramatically with low load percentage for both feeder types but still the overhead lines accept PV plant higher than the underground cables. Conversely, the maximum PV penetration increases with load power factor decreasing and the overhead lines capability for hosti... [more]

Security of supply of water, which meets the quality parameters specified in applicable standards, is now the basis for the functioning of most societies. In addition to climatic, biological, chemical, and physical hazards, it is worth paying attention to consumers’ subjective perception of the quality of tap water supplied in the area of Poland. The article discusses various activities related to water resources management and analyses the results of an evaluation of selected quality parameters of tap water in Poland. A novelty on a European scale here is an examination of the evaluation of these parameters based on potential seasonal differences (spring, summer, autumn, winter). For the first time in the world literature, PROFIT analysis was used to evaluate selected parameters of tap water quality. The aim of the article was to present a model for the evaluation of the parameters of tap water supplied in different seasons of the year in Poland. Due to the complexity of the research... [more]

The thermal diffusivity of building materials is an extremely important parameter influencing the subsequent thermal comfort of building users. By definition, thermal diffusivity describes how quickly heat from a hot source can flow through a material. Therefore, this parameter includes both the thermal conductivity and the heat capacity of the material. This parameter is often neglected in heat-related calculations which, in the case of dynamic problems, leads to unreliable results. It should be taken into account that heat flows through all materials at a finite speed. On the other hand, knowing the correct thermal diffusivity value of building materials, it is possible to accurately determine the internal parameters in rooms over time. There are several methods for determining thermal diffusivity, most of which are destined to determine this property in laboratories. The aim of the present research is to show how the thermal diffusivity of materials can be determined in existing bui... [more]

This paper presents both the results of a study of the existing heat exchanger network (HEN) of an industrial unit for ethylbenzene (EB) production by the alkylation of benzene with ethylene, and an analysis of four different HEN retrofit projects carried out using process integration methods. The project of modernization of HEN was carried out using classical methods of Pinch analysis. For this case, the value of ΔTmin is determined, which is limited by the technological conditions of the process. Additionally, two different heat pump (HP) integration options and the joint retrofit Pinch project with HP integration are under consideration. The economic analysis of each of the projects was carried out. It is shown that the best results will be obtained when implementing the joint project. As a result, steam consumption will be reduced by 34% and carbon dioxide emissions will be decreased by the same amount.