The scale of waste formation from coal-fired generation is significant and tends to grow steadily in the context of the global use of coal for power production. This paper covers the problems and current opportunities for recycling coal fly ash waste from coal generation from the position of a stakeholder approach, namely, identification of the main participants and determination of the effects for economic agents in coal fly ash recycling projects. Based on the method of economic modeling and the empirical assessment of project efficiency, this paper presents alternative patterns of stakeholder interaction in the process of implementing coal fly ash recycling projects, estimates the effects of using coal fly ash, and identifies conflicting interests between stakeholders. It is shown that the reason behind the low interest of the Russian private sector in the processing of coal fly ash is the lack of stimulating market mechanisms for manufacturers and consumers of ash products, the hig... [more]

Star-shaped donor-acceptor molecules are full of promise for organic photovoltaics and electronics. However, the effect of the branching core on physicochemical properties, charge transport and photovoltaic performance of such donor-acceptor materials in single-component (SC) and bulk heterojunction (BHJ) organic solar cells has not been thoroughly addressed. This work shows the comprehensive investigation of six star-shaped donor-acceptor molecules with terminal hexyldicyanovinyl blocks linked through 2,2′-bithiophene π-conjugated bridge to different electron-donating cores such as the pristine and fused triphenylamine, tris(2-methoxyphenyl)amine, carbazole- and benzotriindole-based units. Variation of the branching core strongly impacts on such important properties as the solubility, highest occupied molecular orbital energy, optical absorption, phase behavior, molecular packing and also on the charge-carrier mobility. The performance of SC or BHJ organic solar cells are comprehensiv... [more]

A large consumption of natural gas accompanied by reduced production capabilities makes Europe heavily dependent on imports from Russia. More than half of Russian gas is exported by transiting Ukraine, so in the context of the underlying conflict between the two, this is considered uncertain. Therefore, in this article, we modeled the natural gas transportation system using cooperative game theory in order to determine the bargaining power of the major players (Russia, Ukraine, Germany, and Norway) by using a form of the Shapley value. We described the interaction between countries as network games where utilities from transport routes are considered and proposed three scenarios where the gas flow from Russia to Ukraine is either diminished or completely interrupted, with the purpose of finding out how the bargaining power on this market is shifted in case of network redesign. In this context, we included in the analysis the scenario where the Nord Stream 2 pipeline will be finished. R... [more]

Inflow performance relationship (IPR) is one of the most important methods for the analysis of the dynamic characteristics of gas reservoir production. The objective of this study was to develop a model to improve the accuracy of the IPR for evaluating and predicting the production of gas reservoirs. In this paper, a novel mathematical model, taking into account the real gas PVT behavior, is developed to accurately estimate the inflow performance relationship. By introducing a pseudo-pressure function and a real gas properties database, this model eliminates the error caused by the linearization method and improves the calculation accuracy. The results show that more than 90% of the energy in the flow field is consumed by inertial forces, which leads to significant high-velocity non-Darcy effects in the gas reservoir. The reservoir permeability, original reservoir pressure, stress sensitivity coefficient, and skin factor have a great impact on the inflow performance relationship of gas... [more]

Pumped Hydropower Storage (PHS) is the maturest and most economically viable technology for storing energy and regulating the electrical grid on a large scale. Due to the growing amount of intermittent renewable energy sources, the necessity of maintaining grid stability increases. Most PHS facilities today require a geographical topology with large differences in elevation. The ALPHEUS H2020 EU project has the aim to develop PHS for flat geographical topologies. The present study was concerned with the initial design of a low-head model counter-rotating pump-turbine. The machine was numerically analysed during the shutdown and startup sequences using computational fluid dynamics. The rotational speed of the individual runners was decreased from the design point to stand-still and increased back to the design point, in both pump and turbine modes. As the rotational speeds were close to zero, the flow field was chaotic, and a large flow separation occurred by the blades of the runners.... [more]

Establishing accurate electrical load prediction is vital for pricing and power system management. However, the unpredictable behavior of private and industrial users results in uncertainty in these power systems. Furthermore, the utilization of renewable energy sources, which are often variable in their production rates, also increases the complexity making predictions even more difficult. In this paper an interval type-2 intuitionist fuzzy logic system whose parameters are trained in a hybrid fashion using gravitational search algorithms with the ridge least square algorithm is presented for short-term prediction of electrical loading. Simulation results are provided to compare the performance of the proposed approach with that of state-of-the-art electrical load prediction algorithms for Poland, and five regions of Australia. The simulation results demonstrate the superior performance of the proposed approach over seven different current state-of-the-art prediction algorithms in the... [more]

The Korean government is currently evaluating two alternatives, direct disposal and pyroprocessing, for the disposal of spent nuclear fuel. This paper presents the ranking results of comparing and evaluating direct disposal and pyro-SFR fuel cycle alternatives using multi-criteria decision-making methods such as AHP, TOPSIS, and PROMETHEE. In considering the various evaluation criteria involved in these two alternatives, we aimed to determine the optimal choice in terms of the economic and social conditions of Korea. The evaluation criteria considered were safety, resource availability, environmental impact, economics, nuclear proliferation resistance, and public acceptance. The results show that the pyro-SFR fuel cycle alternative is more advantageous than direct disposal in the AHP and TOPSIS methods, whereas direct disposal is more advantageous in the PROMETHEE method because the ranking is reversed. TOPSIS assigns the ideal value and the most negative value among the input values t... [more]

Nowadays, the rapidly growing population, climate change, and environment pollution put heavy pressure on fresh water resources. The atmosphere is the immense worldwide and available water source. The Adsorptive Water Harvesting from the Atmosphere (AWHA) method is considered a promising alternative to desalination technologies for remote arid regions. The development of novel adsorbents with advanced water-adsorption properties is a prerequisite for practical realization of this method. Metal−organic frameworks (MOFs) are a novel class of porous crystalline solids that bring a great potential for AWHA due to their extremely high specific surface area, porosity, and tailored adsorption properties. This work addresses MIL-160 as a water adsorbent for AWHA. The water-adsorption equilibrium of MIL-160 was studied by volumetric method, the isosteric heat of adsorption was calculated, and finally, the potential of MIL-160 for AWHA was evaluated for climatic conditions of the deserts of Saud... [more]

Packaging was recently identified as an essential element in addressing the key challenge of sustainable food supply and is gaining interest among researchers. It is a central element in food quality preservation due to its role in heat and mass exchange with the external atmosphere, contributing to the preservation of food quality during storage and extending food shelf life. This work proposes three new packaging configurations with the same size but different geometry and ventilation hole sizes and geometry, that change the conditions in which the heat and mass exchange occurs, during either the cooling period of fruits, inside the cooling chamber, or during the period when the packaging is exposed to ambient conditions, outside the cooling chamber. For this purpose, packages with fruit models that replicate the properties of real fruit were subjected to a cooling process inside a cooling chamber for 8 h. Subsequently, during the heating phase, the packages were exposed to ambient c... [more]

Socially expected innovations are innovations considering sustainable development. The subject of the paper focuses on the business model of a start-up providing energy saving services to local government units using smart technologies of Industry 4.0 in the aspect of low touch economy. A methodical critical literature review including quantitative and qualitative assessment, stakeholder analysis and business modeling techniques using Business Model Canvas and Triple Layer Business Model Canvas (TLBMC) was conducted. In addition, an in-depth analysis of a start-up case study was conducted. The research questions are related to the interpretation of the organization’s business data and methods of interpreting Sustainability 3.0 business solutions. The research questions were directed to the challenges regarding the creation of the organization’s sustainable business model architecture and the Business Sustainability 3.0 sustainable business imaging concept. The research objective is to... [more]

Recent Modular Multilevel Converter (MMC) topology allows for drastic improvements in power electronic conversion such as higher energy quality, lower power semiconductors electrical stress, decreased Electro-Magnetic Interferences (EMI), and reduced switching losses. MMC is widely used in High Voltage Direct-Current (HVDC) transmissions as it offers, theoretically, no voltage limit. However, its control electronic structure is not modular itself. Especially, the insulation voltage between the submodule gate drivers’ primaries and secondaries depends on the number of submodules. The converter voltage levels cannot be increased without designing all gate driver isolations again. To solve that issue, the novel concept of distributed galvanic insulation is introduced for multilevel converters. The submodule’s gate drivers are daisy-chained, which naturally reduces the insulation voltage to the submodule capacitor voltage, regardless of the number of submodules. The MMC becomes truly modul... [more]

This paper aims to provide technical insights on the aerodynamic characterization activities performed in the field of the H2020 STRATOFLY project, for the Mach 8 waverider reference configuration. Considering the complexity of the configuration to be analyzed at conceptual/preliminary design stage, a build-up approach has been adopted. The complexity of the aerodynamic model increases incrementally, from the clean external configuration up to the complete configuration, including propulsion systems elements and flight control surfaces. At each step, the aerodynamic analysis is complemented with detailed mission analysis, in which the different versions of the aerodynamic databases are used as input for the trajectory simulation. eventually, once the contribution to the aerodynamic characterization of flight control surfaces is evaluated, stability and trim analysis is carried out. The comparison of the results obtained through the different mission analysis campaigns clearly shows tha... [more]

The aim of this research was to present the changes in biomass production, especially pellets in Poland, in the context of world’s and European Union’s (EU) climate and energy policy, compared to other renewable energy sources. We also analyzed the law concerning the biomass production in the EU. Finally, we have elaborated the prognosis of the pellet production on the world scale. We have used different methods to achieve the goals, among which the most important are the Generalized Autoregressive Conditional Heteroscedasticity (GARCH model) and prognosis. We also compared the results of pellet production in different countries in the European Union. The results were presented in tabular and graphic form. We have received the data from Eurostat and the Main Statistical Office (MSO) in Poland. Our research proves the increase of biomass and pellet production on the global scale. Moreover, global wood pellet production increased by 972% in the years 2005−2018. We can conclude that this... [more]

This study proposes a novel design having dense fins with lesser thickness at the upper layer and comparatively spare fins with greater thickness in the lower layer to further improve the overall thermal performance of a double-layer microchannel heat sink. The design can effectively direct more low temperature fluid flow toward the lower layer to improve heat transfer while the sparse fin structure at low layer can ease pressure drop penalty. At the same time, the thicker fins at the lower layer ensure higher fin efficiency to facilitate high heat transfer. Parametric and detailed analysis is conducted for the proposed double-layer microchannel heat sink in comparison with the traditional one. After optimization, the thermal resistance of the proposed double-layer microchannel heat sink at the same pumping power is found to be reduced by 9.42% when compared to the traditional double-layer microchannel heat sink. Yet at the same Reynolds number, the Nusselt number of the proposed desig... [more]

The wakes of wall-mounted small (square) and large (long) depth-ratio rectangular prisms are numerically studied at Reynolds numbers of 50−250. The large depth-ratio significantly alters the dominance of lateral secondary flow (upwash and downwash) in the wake due to the reattachment of leading-edge separated flow on the surfaces of the prism. This changes the wake topology by varying the entrained flow in the wake region and changing the distribution of vorticity. Thus, the magnitude of vorticity significantly decreases by increasing the prism depth-ratio. Furthermore, the length of the recirculation region and the orientation of near wake flow structures are altered for the larger depth-ratio prism compared to the square prism. Drag and lift coefficients are also affected due to the change of pressure distributions on the rear face of the prism and surface friction force. This behavior is consistently observed for the entire range of Reynolds numbers considered here. The wake size is... [more]

The main load frame of a wind turbine is the primary mount for all nacelle equipment and is used as the principal load transmitter. This frame should have a reliable fatigue safety rating because it is a load-bearing component. In this work, the fatigue life design, manufacturing and implementation process for the main load frame of a 500 kW wind turbine are studied. The weight of the main load frame and static safety factors are preserved while the cyclic life of the bedplate is kept infinite. Modified Goodman theory is applied to achieve an effective fatigue design using a commercial finite element software package. Analytical calculations are carried out to obtain the safety factors of the bedplate and dynamic strength of the materials. A finite element approach is employed to perform stress analysis. Stress oscillations are established for both welded and cast parts of the hybrid bedplate, and the maximum and minimum stress values are established. Fatigue safety factors are calcula... [more]

The pressure swing adsorption (PSA) process was used to capture carbon dioxide (CO2) from the flue gas of a coal-fired power plant to reduce CO2 emissions. Herein, CO2 was captured from flue gas using the PSA process for at least 85 vol% CO2 purity and with the other exit stream from the process of more than 90 vol% N2 purity. The extended Langmuir−Freundlich isotherm was used for calculating the equilibrium adsorption capacity, and the linear driving force model was used to describe the gas adsorption kinetics. We compared the results of breakthrough curves obtained through experiments and simulations to verify the accuracy of the mass transfer coefficient. The flue gas obtained after desulphurization and water removal (13.5 vol% CO2 and 86.5 vol% N2) from a subcritical 1-kW coal-fired power plant served as the feed for the designed three-bed, nine-step PSA process. To determine optimal operating conditions for the process, the central composite design (CCD) was used. After CCD analys... [more]

We designed and implemented a single-switch step-up DC-DC converter based on cascaded boost and Luo converters. The proposed converter demonstrated a quadratic voltage gain and a high efficiency, which makes it suitable for renewable energy applications, where a high voltage gain ratio is desired without imposing a high number of bulky items or employing a high duty cycle of the active switches. This converter benefits from the continuity of the input current waveform, which equips the maximum utilisation of renewable energy sources. While a transformer-less high voltage-gain was achieved, the voltage and current stresses of the power switch and diodes were kept low in comparison with the existing quadratic DC-DC converters. We analysed the converter in both continuous and discontinuous conduction modes. A non-ideal model of components was considered for power loss and efficiency calculations and comparisons. Finally, the simulation results were extracted with PLECS and validated with... [more]

The necessity of two-stage (multi-cyclone-baffle) inlet air filters used for motor vehicle engines operating under dusty conditions was demonstrated. The advantages of a set of several dozen cyclones (multi-cyclone) used for filtering inlet air in the engines were shown. The problem of dust accumulation separated by the cyclones in the multi-cyclone dust collector and the necessity of its removal on a current basis were analyzed. Methods of removing dust from the dust collector by means of the QS suction flow were described. It was demonstrated that the most rational method of forcing the suction flow is the use of the suction flow released from the engine. The study results are presented in this paper and show that the removal (by suction) of the accumulated dust from the dust collector additionally causes a noticeable increase in cyclone filtration efficiency. It was shown that the effective suction flow must not exceed 10−15% of the outlet flow value from the cyclone. It was evidenc... [more]

Load-forecasting problems have already been widely addressed with different approaches, granularities and objectives. Recent studies focused not only on deep learning methods but also on forecasting loads on single building level. This study aims to research problems and possibilities arising by using different load-forecasting techniques to manage loads. For that behavior of two neural networks, Long Short-Term Memory and Feed-Forward Neural Network as well as two statistical methods, standardized load profiles and personalized standardized load profiles are analyzed and assessed by using a sliding-window forecast approach. The results show that personalized standardized load profiles (MAE: 3.99) can perform similar to deep learning methods (for example, LSTM MAE: 4.47). However, because of the simplistic approach, load profiles are not able to adapt to new patterns. As a case study for evaluating the support of load-forecasting for applications in energy management systems, the integ... [more]

In the current research work, palladium (Pd) nanoparticles were electrochemically deposited on a nitrogen doped montmorillonite (CNx-MMT) support using the underpotential deposition (UPD) method. The prepared Pd based composite electrode was studied as an electrocatalyst for methanol fuel oxidation. The catalysts and the supporting materials montmorillonite, acid activated montmorillonite, and nitrogen doped montmorillonite (MMT, HMMT and CNx-HMMT) were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) and electrochemical characterization by cyclic voltammetry (CV). The results indicated that Pd supported on CNx-HMMT possesses enhanced electrocatalytic activity and stability compared to commercial Pd/C, which was attributed to its higher electrochemical surface area (ECSA) (23.00 m2 g−1). The results demonstrated the potential application of novel Pd/CNx-HMMT compo... [more]

The degree of integration of IT devices and consumption of cooling energy are consistently increasing owing to developments in the data center industry. Hence, to ensure the smooth operation and fault prevention of IT devices, the energy consumption of cooling systems has increased, leading to active research on improvements in cooling system performance for reducing energy consumption. This study examines the reduction in cooling energy consumption using a simulation by applying chilled water control and a water-side economizer (WSE) system to enhance the cooling system efficiency. The simulation results showed that the energy consumption was reduced by 1.8% when the chilled water temperature was set to 11 °C in a conventional system and by up to 19.6% when WSE was also applied. Furthermore, when the changes in chilled water temperature were applied for efficient operation of WSE, the energy consumption was reduced by up to 30.1% compared to that in conventional energy systems.

Availability is an economically important metric used to assess the design of marine energy farms. Nowadays, three typical concepts of energy delivery network topologies have been proposed for marine energy conversion systems. Few research works assessing the availability of marine energy conversion systems have been published. Their methodology is only based upon time-consuming Monte Carlo simulations and only covers one maintenance strategy. The objective of this study is to consider different maintenance strategies and quantitatively assess the time-dependent availability of these typical energy delivery network topologies by investigating the working philosophy of these topologies and modelling the logic dependencies of them in a Bayesian network (BN). The working philosophy of each topology is investigated to obtain the logic dependencies of the units in the energy delivery network, by means of qualitative system analysis. A table-like data structure, called hierarchy, is introduc... [more]

In this study, the effect of mainstream velocity on the optimization of a fan-shaped hole on a flat plate was experimentally investigated. The experiment was conducted by changing the forward expansion angle (βfwd), lateral expansion angle (βlat), and metering length ratio (Lm/D) of the film-cooling hole. A total of 13 cases extracted using the Box−Behnken method were considered to examine the effect of the shape parameters of the film-cooling hole under a 90 m/s mainstream velocity condition, and the results were compared with the results derived under a mainstream velocity of 20 m/s. One density ratio (DR = 2.0) and a blowing ratio (M) ranging from 1.0 to 2.5 were considered, and the pressure-sensitive paint (PSP) technique was applied for the film-cooling effectiveness (FCE). As a result of the experiment, the optimized hole showed a 49.3% improvement in the overall averaged FCE compared to the reference hole with DR = 2.0 and M = 2.0. As the blowing ratio increased, the hole exit a... [more]

Recent works have addressed the analysis of some situations that alter the gearbox oil results in wind energy conversion systems (WECS). This work contributes by completing the analysis of additional situations, based on key operational data collected from 10 different multi-megawatt wind turbines at two different locations with two top-tier technologies, and has demonstrated that the oil analysis results can be altered in practice. As important as detecting these situations is to verify how the data collected by the different operators and transferred to the laboratories, this relevant information is not included in most cases. The issues that can stem from this lack of valuable data can be mitigated with a new and more complete template. This paper proposes a detailed template that is ready for an industrial use and contributes to standardizing the information handled by all actors. The suggested template, which is designed based on extensive experimental results and an in-depth anal... [more]