High-quality managerial decision-making is crucial for improving the resource efficiency of production companies in the context of digitalization. Currently, the use of modern methods and tools to manage the consumption and supply of resources of companies should consider the principles of a circular economy. This study focused on the development of a mechanism to manage resource efficiency in the fuel and energy sector. It used the methodological tools developed by the authors, including a comprehensive integral assessment of resource efficiency and a practice-oriented research methodology adapted for fuel and energy enterprises. Having analyzed the existing state of resource consumption, the authors discovered a disparity of indicators, methods and means in the applied assessment of the accounting, control and expenditure of energy resources. Using the analytic hierarchy process as a foundation, the authors applied a technique for identifying inefficient production processes at the f... [more]

The article is devoted to solving the problem of managing the mode parameters of an urban electrical network in case of a discrepancy between the actual electrical load and the specific load. Such an issue leads to a deviation of the parameters, in particular, voltage asymmetry in phases due to current asymmetry. To optimize the mode parameters, it is required that the effective value of the electrical load corresponds as much as possible to the values of the specific electrical load. This depends on the following: actual power consumption, external (climatic and meteorological) factors, internal factors (structural design of residential buildings, uneven load when distributed over the phases of three-phase lines and inputs, different number of electrical receivers for consumers), and the provision of consumers with other sources of energy (both gas and heat supply, and hot water supply). To establish the influencing factors on the actual power consumption, it is proposed to generalize... [more]

At present, most of the winding fault detections of transformers use offline methods, which require the entire line to be powered off or after the transformer has been shut down due to a serious fault, and they cannot detect the running status of the windings in real time and online. Since the transformer will be impacted by VFTO during operation, the VFTO is used as the excitation, and the basic principle of the frequency response method is used to propose an online detection method of transformer winding deformation based on VFTO characteristics. The finite element software is used to calculate the equivalent circuit parameters of normal and deformed windings, and the equivalent circuit model of the transformer windings before and after deformation is established. Due to the uncertainty of the VFTO waveform, combined with the frequency response method, the VFTO waveform is injected into the transformer winding health, and the frequency response curve is obtained from the deformed equ... [more]

In order to solve the problem that the dual Mach Zehnder (M-Z) interferometer system is easily affected by external environmental noise, a data signal-processing scheme based on Hilbert−Huang transform (HHT) is proposed to achieve high-precision location with distributed optical fibers. The polarization compensation module has a built-in dual Sagnac interferometer system which is used to stabilize the polarization state of the Sagnac interferometer. The eigenmode function is obtained by empirical mode decomposition of the received two optical signals, and then the Hilbert spectrum is obtained by superimposing the Hilbert transform, so that the high-similarity curve caused by the vibration signal can be clearly and intuitively extracted. The optical signal information can be calculated based on the cross-correlation and delay estimation algorithm to accurately obtain the vibration position information. The experimental results show that the positioning accuracy can reach ±11 m, with a s... [more]

This paper presents possible applications of heat pumps in buildings during the energy transformation and decarbonization of a country whose energy sector is highly centralized and based on coal. Contemporary cities are spreading beyond the existing borders and new areas cannot be supplied by the existing centralized district heating system. The only form of energy that is available on the outskirts of cities is electricity, which means that it must be used for all energy needs, including heating. In such a case, the use of heat pumps is perfectly justified in terms of energy, economy and environment, especially when they are coupled with photovoltaic systems. Hypothetical micro housing estate energy systems based on photovoltaics and heat pumps are analyzed in the paper. New options for configuration and operation of the energy systems are considered. Results of a simulation study show that by creating a common local electricity network and a local heating network powered by a central... [more]

Bearingless switched reluctance motor (BSRM) adopts a doubly salient structure without windings on the rotor. BSRMs have the advantages of high rate of fault tolerance and simple structure, high power, super high speed and strong adaptability. They have broad application prospects in aerospace, flywheel energy storage, new energy and biomedical fields. Firstly, the suspension operation mechanism of a conventional double winding BSRM is described in this paper. The coupling between torque and suspension force is analyzed with a finite element method. On this basis, from the perspective of magnetic circuit optimization of the torque system and suspension system, the magnetic circuit design, decoupling mechanism and performance characteristics of self-decoupled BSRMs with different topological structures are described centering on the self-decoupled topology form of the BSRM. Finally, the study and development of BSRMs in the future are prospected based on the research status.

The use of renewable energy sources such as solar photovoltaic, wind, and fuel cells is becoming increasingly prevalent due to a combination of environmental concerns and technological advancements, as well as decreasing production costs. Power electronics DC-DC converters play a key role in various applications, including hybrid energy systems, hybrid vehicles, aerospace, satellite systems, and portable electronic devices. These converters are used to convert power from renewable sources to meet the demands of the load, improving the dynamic and steady-state performance of green generation systems. This study presents a comparison of the most commonly used non-isolated DC-DC converters for fuel cell applications. The important factors considered in the comparison include voltage gain ratio, voltage switch stress, voltage ripple, efficiency, cost, and ease of implementation. Based on the comparison results, the converters have been grouped according to voltage level applications, with... [more]

Electric motors that convert electrical energy into motion are one of the basic components of automation systems. In these systems, either linear or circular motion is needed. Linear motion can be obtained either from motors that generate circular motion with the help of ancillary equipment or directly by the means of a linear motor. Obtaining linear motion from motors that produce rotary motion leads to additional costs and reduced efficiency. Linear motors, on the other hand, eliminate the need for conversion mechanisms. Despite this advantage, linear motors have some disadvantages, such as length limitation and low force/current ratio. In this study, a novel Cylindrical Direct Current Linear Motor (CDCLM) with high force/current ratio and no length limitation (long stroke) has been developed. Analyses of the developed motor has been performed with an analytical method. In addition, detailed numerical analyses have been carried out in an Ansys-Maxwell environment. A prototype of the... [more]

Autonomous vehicles in highway driving scenarios are expected to become a reality in the next few years. Decision-making and motion planning algorithms, which allow autonomous vehicles to predict and tackle unpredictable road traffic situations, play a crucial role. Indeed, finding the optimal driving decision in all the different driving scenarios is a challenging task due to the large and complex variability of highway traffic scenarios. In this context, the aim of this work is to design an effective hybrid two-layer path planning architecture that, by exploiting the powerful tools offered by the emerging Deep Reinforcement Learning (DRL) in combination with model-based approaches, lets the autonomous vehicles properly behave in different highway traffic conditions and, accordingly, to determine the lateral and longitudinal control commands. Specifically, the DRL-based high-level planner is responsible for training the vehicle to choose tactical behaviors according to the surrounding... [more]

The injection of carbon dioxide (CO2) is an essential technology for maximizing the potential of hydrocarbon reservoirs while reducing the impact of greenhouse gases. However, because of the complexity of this injection, there will be many different chemical reactions between the formation fluids and the rock minerals. This is related to the clay content of sandstone reservoirs, which are key storage targets. Clay content and clay types in sandstone can vary substantially, and the influence of these factors on reservoir-scale CO2-water-sandstone interactions has not been managed appropriately. Consequently, by simulating the process of CO2 injection in two different clay-content sandstones (i.e., high- and low-clay content), we investigated the effect of the sandstone clay concentration on CO2-water-sandstone interactions in this article. High clay content (Bandera Grey sandstone) and low clay content (Bandera Brown sandstone) were considered as potential storage reservoirs and their r... [more]

Marginal abatement cost (MAC) plays an essential role in pricing pollutants and guiding environmental policies. Considering the heavy polluting nature of China’s coal power industry, this paper aims at providing companies and policymakers with more comprehensive information on the cost of abatement by estimating the MACs of CO2 and SO2 for coal-fired power plants (CFPPs) in China. This study contributes to the literature by considering an interconnected two-stage production system to investigate. The estimation framework is advanced in combining the electricity production and pollution abatement process of CFPPs into a convex quantile regression (CQR) model. The results show that the averages of MAC for CO2 and SO2 are estimated to be 367.56 Yuan/ton and 662.30 Yuan/ton, respectively, indicating that the reduction of such emissions is still costly. The heterogeneous analysis then indicates that large CFPPs, central-government-owned power plants (CGOPPs), and low-regulated CFPPs tend to... [more]

Despite its immense natural resources, Angola struggles to significantly improve its economy to reduce poverty. Carbon emissions have been increasing over the years, even though the country plans to reduce them by 35% by 2030. This paper attempts to assess the carbon emissions of several sectors (industries, transport, services, and residences) on economic growth, intending to find a balance between environmental protection that requires carbon emissions reduction and economic development that may add to environmental degradation. The study employed time series data on GDP, CO2, CH4, and N2O covering 1971 to 2021 and ARDL and ECM models. This is the first study at the state level in Angola on the relationship between economic development and environmental sustainability considering methane and nitrous oxide emissions. Additionally, the paper assesses the responses of GDP to deviation shock of GDP, CO2, CH4, and N2O by 2032. Phillip Perron and Augmented Dickey-Fuller tests showed that a... [more]

The high volatility of commodity prices and various problems that the energy sector has to deal with in the era of COVID-19 have significantly increased the risk of oil price changes. These changes are of the main concern of companies for which oil is the main input in the production process, and therefore oil price determines the production costs. The main goal of this paper is to discover decision rules for a buyer of American WTI (West Texas Intermediate) crude oil call options. The presented research uses factors characterizing the option price, such as implied volatility and option sensitivity factors (delta, gamma, vega, and theta, known as “Greeks”). The performed analysis covers the years 2008−2022 and options with an exercise period up to three months. The decision rules are discovered using association analysis and are evaluated in terms of the three investment efficiency indicators: total payoff, average payoff, and return on investment. The results show the existence of cer... [more]

Lithium batteries are being utilized more widely, increasing the focus on their thermal safety, which is primarily brought on by their thermal runaway. This paper’s focus is the energy storage power station’s 50 Ah lithium iron phosphate battery. An in situ eruption study was conducted in an inert environment, while a thermal runaway experiment was conducted utilizing sealed pressure containers and an external heating triggering mechanism. Both the amount of gas release and the battery’s maximum temperature were discovered. Using gas chromatography, the gas emission from the battery was examined. Its principal constituents included CO, H2, CO2, CH4, C2H4, and so on. Moreover, the experiment discovered a second eruption of lithium iron phosphate, and the stage of its eruption was separated by the pressure signal of the sealed experimental chamber, giving a theoretical foundation and technological backing for the thermal catastrophe safety of lithium batteries.

Photon-enhanced thermionic emission (PETE) is an efficient solar energy conversion mechanism that combines photovoltaic effects and thermionic emissions. In this study, a diffusion−emission model of electrons for the InGaN cathode was deduced based on one-dimensional continuity equations. The temperature dependence of the excess electron concentration, current density, and conversion efficiency at different cathode electron affinities was simulated, and the performance of the PETE converter under isothermal and nonisothermal state was compared. The results show that the improvement in conversion efficiency under isothermal condition was limited by the increase in anode temperature and reached the maximum of ~22% at an electron affinity of 0.56−0.59 eV and the operating temperature of 710−740 K. When the anode temperature was 500 K, the conversion efficiency increased with the increase in the electron affinity and exceeded the maximum value of the isothermal state at 0.6 eV. We explored... [more]

Total organic carbon (TOC) and hydrocarbon generation potential (Pg) are essential parameters for the qualitative evaluation of source rock and the basis for evaluating hydrocarbon resources in petroliferous basins. However, there will be some deviations in evaluating hydrocarbon resources of overmature source rock by using TOC and Pg. The super-thick overmature source rock of the Early Cretaceous Laiyang Formation was found in well LK-1, the Riqingwei Basin. To accurately understand the oil and gas potential of the Riqingwei Basin, this paper conducted a systematic organic geochemical analysis of the overmature source rock of the Early Cretaceous Laiyang Formation found in well LK-1. Combined with the results of previous thermal simulation tests on hydrocarbon generation of low-maturity samples in the Jiaolai Basin, the original total organic carbon (TOC0) content of source rock in well LK-1 was recovered and the evaluation criteria of overmature source rock was established. Results:... [more]

In this study, flow and heat transfer characteristics in novel non-closed 3/4 ring-shaped micro-pin-fin arrays with in-line and staggered layouts were investigated numerically. The flow distribution, wake structure, vorticity field and pressure drop were examined in detail, and convective heat transfer features were explored. Results show that vortex pairs appeared earlier in the ring-shaped micro-pin-fin array compared with the traditional circular devices. Pressure drop across the microchannel varied with layout of the fins, while little difference in pressure drop was observed between ring-shaped and circular fins of the same layouts, with the maximum difference being 1.43%. The staggered ring-shaped array was found to outperform the in-line array and the circular arrays in convective heat transfer. A maximum increase of 21.34% in heat transfer coefficient was observed in the ring-shaped micro-pin-fin array in comparison with the circular micro-pin-fin array. The overall thermal-hyd... [more]

The need to effectively control and reduce energy consumption in buildings has become a global concern, prompting an increasing number of studies on the energy efficiency of straw buildings. However, previous review articles on straw research have primarily focused on fragmented material properties such as thermal insulation and mechanical strength and have lacked a comprehensive review of straw materials in building energy efficiency, as well as a thorough analysis of the development lineage of straw building materials. To fill this research gap, this study conducted a bibliometric analysis of 338 papers on the energy efficiency of straw materials published in the WOS core database between 1992 and 2022. The study constructed and visualized multifaceted co-occurrence networks representing the research literature on the energy efficiency of straw building materials, providing a comprehensive understanding of current research efforts, development trends, hot research directions, and the... [more]

This paper concerns the mitigation of voltage disturbances deteriorating power quality and disrupting the operation of LV distribution grids due to the high penetration of PV energy sources in prosumer installations. A novel control strategy for 3-phase 4-wire PV inverters is proposed, which ensures the transmission of PV active power and simultaneous compensation of load unbalance and reactive power, making the prosumer installation balanced and purely active. It results in the balance of phase voltages and the mitigation of their variability. Unlike other methods used for voltage regulation in LV grids, the proposed solution contributes to the reduction in losses, is simple, and does not require additional costs. In the paper, a control algorithm for the PV inverter is described. Its effectiveness was tested by simulation using a model of the real LV distribution grid developed in the PSCAD/EMTDC program. The results of the simulations are presented and evaluated.

The aim of this research is to investigate the effects of rheological models of shear-thinning fluids and their estimated parameters on the predictions of laminar, transitional, and turbulent flow. The investigation was carried out through experimental and computational fluid dynamics (CFD) studies in horizontal pipes (diameters of 19.1 mm and 76.2 mm). Six turbulent models using Reynolds averaged Navier−Stokes equations in CFD_ANSYS Fluent 19.0 were examined in a 3D simulation followed by comparison studies between numerical and experimental results. Regarding results of laminar regions in power-law rheology models, Metzner and Reed presented the best fit for the pressure loss and transitional velocity. For the turbulent region, correlations observed by Wilson and Thomas as well as Dodge and Matzner had good agreement with the experimental results. For Herschel−Bulkley fluids, pressure losses and transitional regions based on a yielded region were examined and compared to the experime... [more]

Despite significant advances in distributed renewable energy systems (DRES), the technology still faces several substantial challenges that prevent the large-scale adoption of these systems into a country’s energy sector. The intermittency of renewables, uncertainties associated with real-time multi-horizon weather and load forecasts, and lack of comprehensive control systems are among the main technical and regulatory challenges for the real-world adoption of DRES. This paper outlines the current state of knowledge in the real-world operation of DRES and also describes pathways and methodologies that enable and facilitate the uptake of DRES in a country’s energy sector.

Community energy projects have gained popularity in recent years, and encouraging citizens to form local energy communities (LEC) is considered an effective tool for raising awareness about renewable energy. Since no single universal method exists for operating LECs, this study investigated the impact that different business models and asset dispatch methods have on LECs’ economic and energy-related indicators. We carried out a case study, which included the development, modelling, and simulation of seven scenarios using mixed-integer linear programming (MILP). To measure and compare the prospective performance of the LECs in each scenario, six key metrics were evaluated and assessed. The authors find that simple, rule-based control systems might be well suited for LECs with a limited number of controllable assets that aim to provide increased levels of self-consumption of up to 3%. We also conclude that when the LEC utilises an energy cooperative business model, the selected asset dis... [more]

The existing public utility building belonging to the Forest Experimental Station of the Poznań University of Life Sciences, due to high energy consumption and related costs, has qualified for deep energy modernisation or consideration for the construction of a new building. One of the goals is to achieve carbon neutrality and have a positive energy balance. The article uses the hybrid DEMATEL-AHP/ANP-VIKOR method. The methodology used is distinguished by the creation of a set of decision-making criteria and the identification of the relationship between them, which is determined by conducting a survey of a group of experts using the Delphi method, as well as determining the preferences of the decision-maker using a survey of the target group using social research. Two different models of the decision-maker’s preferences have been developed, taking into account the selected decision criteria, and four acceptable technical solutions have been identified. As a result of the calculations... [more]

The modular multilevel matrix converter (M3C) is the core component in low-frequency AC (LFAC) transmission, which is a competitive scheme for offshore wind power integration. In this paper, the M3C control strategy with the reduced switching frequency SM voltage balancing method is proposed. First, based on the conventional αβ0 and dq transformations, the M3C mathematical model is derived. Then, the dual-loop control structure with outer loop and inner loop controllers commonly used in voltage source converters is applied to the M3C. The inner loop controller consists of the current tracking controller in the dq reference frame and the circulating current suppressing controller in the αβ0 reference frame; the outer loop controller is proposed for the offshore wind farm LFAC integration scenario. Additionally, according to the operating characteristics of full-bridge sub-modules (FBSMs), three characteristic variables are defined and a reduced switching frequency SM voltage balancing m... [more]

Carbon capture and storage (CCS) is an effective means to achieve the goals of carbon peaking and carbon neutrality. To improve the operating economics and low-carbon emission of an integrated energy system, the strong exothermic property of power-to-gas is utilized for heat recovery and injection into the heat network. This expands the adjustable range of electric output of combined heat and power (CHP) units which will improve wind power accommodation. The CO2 produced by the coal-fired unit is captured using post-combustion carbon capture technology, and then stored and used to manufacture methane, in order to realize the electric−gas−heat integrated energy system coupled with power-to-gas. Based on the ladder-type carbon trading mechanism, a low-carbon economic dispatch model of integrated energy system is proposed, which considers the incorporation of power-to-gas heat recovery and carbon capture and storage. The objective function is to minimize the total operation cost of the sy... [more]