Wind turbine blade leading-edge erosion (LEE) is a cause of increased operation and maintenance costs and decreased annual energy production. Thus, detailed, site-specific quantification of likely erosion conditions are critically needed to inform wind plant owner/operator decisions regarding mitigation strategies. Estimating the damage potential at a wind plant site requires accurate measurement of precipitation intensity, phase, droplet size distributions, wind speeds and their joint statistics. The current work quantifies the effect of disdrometer type on the characterization of LEE potential at a site in the US Southern Great Plains. using observations from three co-located disdrometers (an optical, an impact and a video disdrometer), along with hub-height wind-speed observations from a Doppler lidar and two LEE models: a kinetic energy model and the Springer model. Estimates of total kinetic energy of hydrometeor impacts over the four-year study period vary by as much as 38%, and... [more]

Energy efficiency in buildings is very important since it contributes significantly to fossil fuel consumption and consequently climate change. Several approaches have been taken by researchers and the industry to address the issue. These approaches are classified as either passive or active approaches. The purpose of this review article is to summarize a number of the technologies that have been investigated and/or developed. In this technical review paper, the more commonly used active and passive building energy conservation techniques are described and discussed. The pros and cons of both the active and passive energy techniques are described with appropriate reference citations provided. This review article provides a description to give an understanding of building conservation approaches. In the active classification, several methods have been reviewed that include earth-to-air heat exchangers, ground-source and hybrid heat pumps, and the use of new refrigerants, among other met... [more]

Production and consumption as a result of human demand for energy are increasing with each passing day as populations grow [...]

In Northeast Brazil, the use of biomass for energy generation is settled on traditional productive arrangements, such as a sugarcane production system in the humid Atlantic coastal area and firewood extraction from native tropical dry forests in the west. In parallel, substantial amounts of other biomass sources, such as residues from agricultural or urban processes, are still little used or wholly wasted, fudging the opportunity to generate new value chains based on these biomass sources. We hypothesize that using these non-traditional biomass sources to produce biofuels would significantly increase the regional bioenergy supply. In this context, this article discusses the potential for the production and use of biofuels and bioenergy in Northeast Brazil and its effects on regional development, which may be useful for both private actors and policymakers in the energy sector. The use of biomass sources for energy in the region is significant, reaching approximately 8.8 million tons of... [more]

In light of the energy and environment issues, fuel cell vehicles have many advantages, including high efficiency, low-temperature operation, and zero greenhouse gas emissions, making them an excellent choice for urban environments where air pollution is a significant problem. The dynamics of fuel cells, on the other hand, are relatively slow, owing principally to the dynamics of the air compressor and the dynamics of manifold filling. Because these dynamics can limit the overall performance of fuel cell vehicles, two key technologies that have emerged as critical components of electric vehicle powertrains are batteries and supercapacitors. However, choosing the best hybrid energy storage system that combines a battery and a supercapacitor is a critical task nowadays. An electric vehicle simulated application by MATLAB Code is modeled in this article using the multi-objective particle swarm optimization technique (MOPSO) to determine the appropriate type of batteries and supercapacitor... [more]

When the shaft rotates in microturbines, the rotational movement is converted to electrical power. This is achieved through a permanent magnet synchronous machine (PMSM) housed on the shaft and the power electronics components. To the best of the authors’ knowledge, articles that comprehensively describe the power transmission and control in the electrical part of microturbines have yet to be introduced, namely, the PMSM and power electronics. This review paper presents a detailed review of power conversion in each component of the electrical part of microturbines. The paper also reviews the existing literature on microturbines’ electrical performance, noting areas where progress has already been made as well as those where more research is still needed. Furthermore, the paper explains the control system in the electrical part of microturbines, outlining the grid synchronisation control approach for grid-connected microturbines and reviews the possibility of employing control strategie... [more]

Energy has the most significant input to agricultural production. The EU’s effort to produce a carbon-neutral economic entity necessitates changes in the energy mix used for agricultural production. Therefore, we employ different variables, in particular, the emissions generated by energy sources, namely coal, natural gas, and diesel gas and their interlinkages with the GDP share generated from agriculture. The data are annual and refer to the period 1970−2020. The ARDL methodology is the econometric tool employed. The year 1990 is identified as a statistically significant break point for all variables, while for the cointegrating equation, the year 2009 appears to play a significant role. Emissions generated by coal appear to play a vital role in the GDP share generated by agriculture and, therefore, should be the main focus of the policy measures taken. Coal should be replaced by other renewable sources or the use of technologies by farmers that improve energy efficiency in order to... [more]

The reasonable allocation of the battery energy storage system (BESS) in the distribution networks is an effective method that contributes to the renewable energy sources (RESs) connected to the power grid. However, the site and capacity of BESS optimized by the traditional genetic algorithm is usually inaccurate. In this paper, a power grid node load, which includes the daily load of wind power and solar energy, was studied. Aiming to minimize the average daily distribution networks loss with the power grid node load connected with RESs, a site selection and capacity setting model of BESS was built. To solve this model, a modified simulated annealing genetic algorithm was developed. In the developed method, the crossover probability and the mutation probability were modified by a double-threshold mutation probability control, which helped this genetic method to avoid trapping in local optima. Moreover, the cooling mechanism of simulated annealing method was presented to accelerate the... [more]

An electric power system is an important factor in national economic development. However, as an electric power system requires more electric equipment in its operation process, it is prone to short circuits, faults and other problems, which can lead to fires. To help prevent fires in such power systems, the hydraulic performance of the existing firefighting monitor should be optimized. A rectifier is an important structure which affects the performance of the firefighting monitor. In this paper, numerical simulations based on CFD (computational fluid dynamics) are carried out to analyze the fluid flow inside firefighting monitors with five different rectifier structures. In addition, the effects of rectifier structure on both the turbulent kinetic energy and axial velocity of the fluid inside the firefighting monitor are analyzed. The results show that rectifier installation can reduce the turbulent energy of the inlet and outlet of the firefighting monitor and improve the axial veloc... [more]

In a smart home with distributed energy resources, the home energy management system (HEMS) controls the photovoltaic (PV) storage system by executing the optimization algorithm to achieve the lowest power cost. The existing mixed integer linear programming (MILP) algorithm is not suitable for execution on the end-user side due to its high computational complexity. The HEMS algorithm based on a long short-term memory neural network (LSTM-HEMS) can effectively solve the problem of the high computational complexity of MILP, but its optimization outcome is not high due to the accumulation of prediction errors. In order to achieve a better balance between computational complexity and optimization outcome, this paper proposes a lightweight optimization algorithm called the FastInformer-HEMS, which introduces the E-Attn attention mechanism based on Informer and uses global average pooling to extract the attention characteristics. Meanwhile, the proposed method introduces the maximum self-con... [more]

A composite container for an electric vehicle (EV) battery module filled with a phase-change material (PCM) was experimentally tested at various discharge rates. The average cell temperatures at 1 C, 2 C, and 4 C discharge rates, respectively, might reach 38 °C, 50 °C, and 70 °C in the absence of any heat-absorbing material. The temperature was noticeably lower with PCM present than with a conventional battery module. For instance, at 4 C discharge rates, none of the battery cells inside the PCM-filled module were able to reach 70 °C. Unfortunately, the PCM addition also degraded the composite’s tensile qualities. Further investigations used Paraffin-20 and Caprylone since PCMs provide a notably different thermal performance due to their distinctive latent heat profiles. It was observed that a high melting temperature of the paraffin mixture, despite its slightly lower latent heat capacity compared to Caprylone, could lead to a more uniform temperature. Overall, both PCMs can be used a... [more]

The study provides a study on energy storage technologies for photovoltaic and wind systems in response to the growing demand for low-carbon transportation. Energy storage systems (ESSs) have become an emerging area of renewed interest as a critical factor in renewable energy systems. The technology choice depends essentially on system requirements, cost, and performance characteristics. Common types of ESSs for renewable energy sources include electrochemical energy storage (batteries, fuel cells for hydrogen storage, and flow batteries), mechanical energy storage (including pumped hydroelectric energy storage (PHES), gravity energy storage (GES), compressed air energy storage (CAES), and flywheel energy storage), electrical energy storage (such as supercapacitor energy storage (SES), superconducting magnetic energy storage (SMES), and thermal energy storage (TES)), and hybrid or multi-storage systems that combine two or more technologies, such as integrating batteries with pumped hyd... [more]

Single-junction organic solar cells have reached a power conversion efficiency of 20% with narrow bandgap non-fullerene electron acceptor materials such as Y6, as well as with large band gap electron donor materials and their derivatives. The power conversion efficiency improvement of single-junction organic solar cells is a result of highly efficient light harvesting in the near-infrared light range and reduced energy losses with the most promising active layer layout currently available, Bulk-Heterojunction. Ternary blending is known to be the most advanced strategy to construct Bulk-Heterojunction structures in organic solar cells at present. In this review, we examine different devices based on Bulk-Heterojunction structures with efficient electron donors and acceptors. Then, we review the performance of binary and ternary organic solar cells with high power conversion efficiency, in conjunction with different anode and cathode interfaces used in recent studies of high-power conver... [more]

Gasoline engines employing the spatially distributed auto-ignition combustion mode, known as controlled auto-ignition (CAI), are a prospective technology for significantly improving engine efficiency and reducing emissions. This review paper provides an overview of developments in various gasoline CAI technologies and discusses their attendant strengths and weaknesses. Hybrid propulsion systems powered by high-efficiency gasoline CAI engines can provide a low-carbon pathway for mobility sector decarbonisation. Therefore, this paper focuses on the challenges and opportunities of CAI implementation, especially for electrified powertrains. Different control actuators that can extend the CAI operating range are discussed, and opportunities for synergistic operation between thermal and electric components of hybridised powertrains are identified. Such synergies can remove impediments in the way of CAI system adoption and can, thus, support CAI adoption and maximise efficiency gains from its... [more]

High-electron-mobility transistors based on gallium nitride technology are the most recently developed power electronics devices involved in power electronics applications. This article critically overviews the advantages and drawbacks of these enhanced, wide-bandgap devices compared with the silicon and silicon carbide MOSFETs used in power converters. High-voltage and low-voltage device applications are discussed to indicate the most suitable area of use for these innovative power switches and to provide perspective for the future. A general survey on the applications of gallium nitride technology in DC-DC and DC-AC converters is carried out, considering the improvements and the issues expected for the higher switching transient speed achievable.

Statistical characteristics of the wind speed in the Samaria region of Israel have been analyzed by processing 11 years of wind data provided by the Israeli Meteorological Service, recorded at a 10 m height above the ground. The cumulative mean wind speed at a measurement height was shown to be 4.53 m/s with a standard deviation of 2.32 m/s. The prevailing wind direction was shown to be characterized by a cumulative mean azimuth of 226° with a standard deviation of 79.76°. The results were extrapolated to a 70 m height in order to estimate wind characteristics at the hub height of a medium-scale wind turbine. Moreover, Weibull distribution parameters were calculated annually, monthly, and seasonally, demonstrating a good match with histogram-based statistical representations. The shape parameter of the Weibull distribution was shown to reside within a narrow range of 1.93 to 2.15, allowing us to assume a Rayleigh distribution, thus simplifying wind turbine energy yield calculations. Th... [more]

There has been growing interest in applying the DEM (discrete element method) to study the charging and burden distribution in a BF (blast furnace). In practice, the real particles in a BF are non-spherical. However, spherical particles have mostly been used in previous DEM investigations. Furthermore, various particle models have been developed to describe non-spherical particles. However, the effects of using different particle models on particle behavior in a BF are still unclear. Therefore, a comparative study of how the particle shape model impacts the burden charging in a BF was conducted. Specifically, the DEM using a multi-sphere model, polyhedral model, and super-ellipsoid model was first established. Then, experiments and DEM simulations of the charging and burden distribution of non-spherical quartz sand particles in a lab-scale bell-less top BF were performed. The results indicated that the number of sub-spheres, the principle of creating the particle for multi-spheres, the... [more]

The harnessing and utilization of tidal current energy have emerged as prominent topics in scientific inquiry, due to their vast untapped resource potential, leading to numerous investigations into the efficacy of hydrokinetic turbines under various operational conditions. This paper delineates the wake field characteristics and performance of horizontal axis tidal stream turbines under the influence of support structures, using a comprehensively blade-resolved computational fluid dynamics (CFDs) model that employs Reynolds-averaged Navier−Stokes (RANS) equations in combination with the RNG k-ε turbulence model. To achieve this, the study utilized experimental tank tests and numerical simulations to investigate the distribution characteristics and recuperative principles of the turbine’s wake field. The velocity distribution and energy augmentation coefficient of the wake field showed strong agreement with the experimental results. To further assess the effect of support structures on... [more]

Self-discharge of lithium-ion cells leads to voltage decay over time. In this work, the self-discharge was measured at 30 ∘C for three cell types at various voltage levels for about 150 days in a constant voltage mode determining the current at a high precision (float current). All cells exhibit a transient part leading to a steady-state, which is no longer influenced by reversible effects. To study the effect of the check-ups on the steady-state float current, the cells, interrupted and not interrupted by check-ups, were compared. The results indicate that both the transient processes and steady-state currents are highly reproducible. In the first period of the float current, the polarization dominates the measured current, followed by the anode overhang effect dominating the process for a period of 5−30 days. After the decline of both processes, a mostly constant steady-state in the order of μA is observed. The check-up interruption generally shows no apparent effect on the reached s... [more]

Conventionally, DC arc furnaces are fed by thyristor rectifiers to control the level of current or power transferred to the load. With the advancement of high-power transistors, other structures such as diode rectifiers and DC choppers have been introduced and developed for the feeding system of DC electric arc furnaces. In this paper, the effect of different power supply systems on power quality indexes is discussed. In this regard, two types of feeding systems are considered, including a power supply system based on thyristor rectifiers and a power supply system based on diode rectifiers and DC choppers. In addition, different control methods, including constant current control (CCC) and constant power control (CPC), on DC electric arc furnaces are applied. For evaluating the power quality indexes, voltage and current harmonic distortion, unbalance of voltage and current, and power factor on the AC side are investigated for different power supply systems. Simulation results were perf... [more]

Natural gas-fired combined cycle plants are nowadays one of the most efficient and environmentally friendly energy complexes. High energy efficiency and low specific emissions are achieved primarily due to the high average integral temperature of heat supply in the Brayton−Rankine cycle. In this case, the main sources of energy losses are heat losses in the condenser of the steam turbine plant and heat losses with the exhaust gases of the waste heat boiler. This work is related to the analysis of the thermodynamic and economic effects in the transition from binary to trinary cycles, in which, in addition to the gas and steam−water cycles, there is an additional cycle with a low-boiling coolant. A method for the feasibility study of a waste heat recovery unit for trinary plants is proposed. The schematic and design solutions described will ensure the increased energy and economic performance of combined cycle power plants. Based on the results of the thermodynamic optimization of the st... [more]

Anaerobic digestion is a well-known and long-used biological method for stabilizing organic materials. Among the benefits of this process in waste management are the reduction of greenhouse gases, the production of alternative energy, and the acquisition of valuable digestate that can be used in the form of biogas, thereby closing the cycle of elements in nature. For some materials, such as manure, which is heterogeneous in terms of morphology and chemical composition, digestion of a single substrate may not be very efficient. Therefore, more and more studies on the co-digestion process are appearing in the literature. This solution allows higher biogas production and the possibility of processing several wastes simultaneously. The prospect of the future effective application of anaerobic co-digestion depends on regulations, work regime, and access to raw materials. Therefore, there is a need to systematize the available knowledge and results, as well as to identify the possibilities a... [more]

Carbon emissions are rapidly increasing with continuing global economic development, necessitating an urgent energy revolution. Often, when calculating carbon footprint, analysts have failed to account for changes in capital stock and the impact of indirect emissions caused by the consumption of imported products. Furthermore, the homogenization of industrial and resident sectors has reduced our understanding of the specific driving forces behind carbon emissions. To avoid such locational and temporal biases, this study employs a dynamic input−output model to re-estimate the carbon footprint of only residents. We deconstruct residential emissions into different consumption categories and conduct a comparative analysis between developed and developing countries from across the world. To this end, data from 44 global economies were obtained from the World Input−Output Database for the period from 2000 to 2014. For developing countries, food consumption had the highest share of embodied c... [more]

The automotive upholstery industry, which processes bovine leathers, has struggled with vast amounts of solid waste, of which the majority are fractions, such as shavings and splits and offcuts, both containing chromium (Cr) and free of Cr. In this work, a novel leather waste-to-fertiliser approach has been tested: four lightly processed (incubation with effective microorganisms) and three aggressively processed (using pyrolysis or hydrolysis processes) tanned leather waste fractions were used. They were applied as organic nitrogen-based fertilisers in two separate glasshouse experiments, consisting of four subsequent harvests, under spring−autumn conditions in northern Poland. The Cr stressing effect caused by bovine shavings containing Cr and splits and offcuts containing Cr stimulated an increase in ryegrass growth after 30 days, providing twice the dry matter yield than bovine shavings free of Cr and splits and offcuts free of Cr, then (after 90 and 120 days) it inhibited growth. T... [more]

This work focuses on the simulation and testing of an innovative storage system for a PHEV vehicle, investigating the possibility of replacing the car’s original storage system with a mixed-storage system with lithium-ion batteries and supercapacitors connected in direct parallel without the use of an intermediate DC/DC converter. The aim is to evaluate the behavior of the supercapacitors’ branch compared with that of the Li-ion cells, both in the discharge/charge transients and over an entire WLTP cycle (Worldwide harmonized Light vehicles Test Procedure). The analysis started with the definition of the digital models of a lithium cell and a supercapacitor. The parameters of the models were tuned through experimental characterization of the two storage cells, Li-ion and supercapacitor. Subsequently, the overall models of the branch with the lithium cells and the branch with the supercapacitors were constructed and connected. The overall storage system was sized for application to a PH... [more]