The exploitation of natural resources is associated with many natural hazards. Currently, the copper ore deposits exploited in Polish mines are located at a depth of about 1200 m below the surface. The primary temperature of the rocks in the exploited areas reaches 48 ∘C, which constitutes a major source of heat flux to the mine air. However, another important source of heat is the machine plant, which mainly consists of machines powered by diesel engines. Following the results of in situ measurements, boundary conditions for a simulation were determined and a geometric model of the cabin was created. Furthermore, an average human model was created, whose radiative heat transfer was included in the analysis. Three cases were studied: the first covering the current state of thermal conditions, based on the measurement results, and two cases of forecast conditions. In the second case, the temperature of the conditioned air was determined, and in the third, the flow velocity required to e... [more]

Analyzing and mastering the fractal features of coal-measure sedimentary rocks is crucial for accurately describing the pore structure of coalbed methane resources. In this work, mercury intrusion porosimetry (MIP) and nuclear magnetic resonance (NMR) are performed on coal-measure sedimentary rocks (i.e., shale, mudstone, and sandstone) to analyze their pore structure. Pore size distributions (PSDs) and the multifractal dimensions of the investigated samples are discussed. Moreover, multivariable linear regression models of multifractal dimensions are established through a comprehensive analysis of multifractal characteristics. The results show that sandstone (SS-1) and clay rocks are dominated by nanopores of 0.01 to 1 μm, while sandstone (SS-2) is mostly mesopores and macropores in the range of 1 to 10 μm. The fractal characteristics of the investigated rock samples show a prominent multifractal characteristic, in which DA reflects the surface structure of micropores, while DS repres... [more]

Standard technical solutions are not cost-effective for many small hydropower sites. This study aims to demonstrate the workflow for the tailor-made variable-speed axial propeller turbine and provide proof of this concept. The turbine is designed to meet the site’s specific space limitations and operating range needs. The runner shape is adjusted to the variable-speed operation and defined hydraulic profile using a parametric geometry model and CFD-based optimization. The variable-speed propeller turbine shows excellent flow control while keeping the mechanical design simple. The tailor-made approach minimizes construction costs using existing structures and is highly suitable for mini-hydropower applications. The prototype—an atypical turbine designed for highly restricted space and installed on-site—serves as proof of the concept. The findings on the design of axial variable-speed turbines are presented.

The paper presents a physics-based method to calculate in real time the distribution of temperature in the active part of liquid immersed power transformers (LIPT) in a transient thermal processes during grid operation. The method is based on the detailed dynamic thermal-hydraulic network model (THNM). Commonly, up to now, lumped models have been used, whereby the temperatures are calculated at a few points (top-oil and hot-spot), and the parameters are determined from basic or extended temperature-rise tests and/or field operation. Numerous simplifications are made in such models and the accuracy of calculation decreases when the transformer operates outside the range of tested values (cooling stage, loading). The dynamic THNM reaches the optimum of accuracy and simplicity, being feasible for on-line application. The paper presents fundamental equations of dynamic THNM, which are structurally different from static THNM equations. The paper offers the numerical solver for the case of a... [more]

Interleaved DC−DC converters have significant advantages in improving the capability of power converters, and coupling the filtering inductor of the converter could further increase the power density. However, existing modeling and controller designs are complex and require multiple sensors to be involved in the control, which is not conducive to engineering implementation and reducing production costs. In view of this problem, taking a two-phase interleaved boost converter with a coupled inductor as an example, the small-signal models of the converter are derived for the resistive load and constant voltage source load using the state averaging method. The total inductor current is engaged in the control as a feedback signal, avoiding the coupling effect of the inductor on increasing the complexity of the controller. Based on this, a double closed-loop controller is designed, and a prototype of the two-phase interleaved boost converter with coupled inductor is built. Only one current s... [more]

Cell wall disturbance is an important step in the downstream process of improving the efficiency of lipid extraction from microalgae. Surfactants have been proven to be efficient alternatives to organic solvents in the extraction process. In this study, an effective approach involving deep eutectic solvent (DES) (choline chloride and carboxylic acids) treatment supplemented with surfactants has been developed to disrupt the cell walls of microalgae and increase the extraction of lipids suitable for biodiesel production. A combination of polar and non-polar solvents (ethyl acetate and n-butanol) was used for the lipid extraction process. Microalgae biomass pretreated with choline chloride malonic acid supplemented with the surfactant hexadecyl trimethylammonium chloride (HTAC) showed the best results, improving lipid extraction by 12.365%. Further elucidation of the detailed mechanism behind the cell disruption of the microalga wall by DES was achieved using density functional theory (D... [more]

Due to the inherent uncertainty of wind conditions as well as the price unpredictability in the competitive electricity market, wind power producers are exposed to the risk of concurrent fluctuations in both price and volume. Therefore, it is imperative to develop strategies to effectively stabilize their revenues, or cash flows, when trading wind power output in the electricity market. In light of this context, we present a novel endeavor to construct multivariate derivatives for mitigating the risk of fluctuating cash flows that are associated with trading wind power generation in electricity markets. Our approach involves leveraging nonparametric techniques to identify optimal payoff structures or compute the positions of derivatives with fine granularity, utilizing multiple underlying indexes including spot electricity price, area-wide wind power production index, and local wind conditions. These derivatives, referred to as mixed derivatives, offer advantages in terms of hedge effe... [more]

Road transport is one of the most important factors for the national economy due to its universality and comprehensive possibilities of transporting people and goods. Unfortunately, from the energy point of view, it is also the most cost-intensive and has a negative influence on the natural environment. For these reasons, issues related to limiting the use of conventional fuels are very important, which results in reducing emissions from this sector, as well as reducing transport costs. This article presents currently used energy sources for propulsion of road vehicles, including fossil and alternative fuels, gaseous fuels and other energy sources such as fuel cells. The following section presents technologies that allow to recover some of the energy lost in motor vehicles and internal combustion engines used for their propulsion. The principle of operation of these solutions, their structure and their main features are presented. The last part focuses on discussing and identifying the... [more]

As the essential component of shale, clay minerals have a vital influence on the pore structure and the gas content of reservoirs. To investigate the compositional characteristics of coal-measure shale and its effects on pore structure, a total of thirteen Taiyuan formation shale samples were collected from the Qinshui Basin and were analyzed using a combination of X-ray diffraction analysis, X-ray fluorescence spectrometry, Fourier transform infrared spectroscopy (FE-SEM), polarized optical microscopy, and field emission scanning electron microscopy. The results show that the principal minerals of the samples are quartz, kaolinite, and illite. Most of the kaolinite was an original terrigenous detrital material with low crystallinity and a low degree of ordering, whereas the illite was mainly composed of 1Md resulting from diagenesis. Clay minerals developed slits, irregularly-shaped or multisized pores during diagenesis, which can be classed into interlayered pores, intergranular pore... [more]

In daily life, energy plays a critical role. Hydrogen energy is widely recognized as one of the cleanest energy carriers available today. However, hydrogen must be produced as it does not exist freely in nature. Various methods are available for hydrogen production, including electrolysis, thermochemical technology, and biological methods. This study explores the production of biological hydrogen through the degradation of organic substrates by anaerobic microorganisms. Bacillus paramycoides and Cereibacter azotoformans strains were selected as they have not yet been studied for biological hydrogen fermentation. This study investigates the ability of these microorganisms to produce biological hydrogen. Initially, the cells were identified using cell morphology study, gram staining procedure, and 16S ribosomal RNA (rRNA) gene polymerase chain reaction. The cells were revealed as Bacillus paramycoides (MCCC 1A04098) and Cereibacter azotoformans (JCM 9340). Moreover, the growth behaviour... [more]

This study examines whether shifts in the stance of policymaking can account for the observed predictability in excess energy poverty (EP) or fuel poverty (FP) levels. Energy-related poverty is a subcategory of global poverty and can be categorized into accessibility problems related to EP and affordability issues associated with FP, which have a similar but not identical meaning. Furthermore, developed and developing countries have different energy issues, as the former deal with FP and the latter with EP. However, there are discrepancies in EP not only between countries but within counties as well; for instance, there are differences in urban and rural areas too. Difficulties in energy access can be devastating for people living at risk of poverty. Social welfare, although at stake due to the energy crisis sparked at the same time as the warfare in eastern Europe. Renewables and green fossil fuels have price fluctuations, and inflation is also a stress factor in EP. Generally, soluti... [more]

The circular economy is an economic concept opposite to the current linear system. One of its main principles is to seek to minimise waste by reusing seemingly useless raw materials. Biogas plants are places where energy can be recovered from waste. In order to boost the environmental benefits of this concept, it is important to rely on local systems (including supply chains). Therefore, the aim of this study was to examine whether biogas plants in Poland operate in a circular manner from the perspective of locality. The analysis was based on questionnaire surveys concerning the nature of the facilities’ operations, divided into biogas plants located at sewage treatment plants, biogas plants based on municipal waste and agricultural biogas plants. On the basis of the data obtained, statistical and spatial analyses were carried out to verify the installed capacity of the facilities, the distance from which they obtain their substrate and the use of the biogas produced. The results of th... [more]

Small dust grains cause a higher intensity of increase in the flow resistance of the fibrous filter bed, which, due to the established value of the permissible resistance, results in a shorter period of operation of the air filter and the vehicle. At the same time, the mass of dust per unit of filtration area takes on smaller values. Such a phenomenon occurs in the two-stage “multicyclone-baffle filter” engine inlet air filtration system. The main objective of this study was to experimentally determine the mass of dust retained per unit of filtration area (dust absorption coefficient km) of the PowerCore filter bed operating under two-stage filtration conditions, which cannot be found in the available literature. The original methodology and conditions for determining the dust absorption coefficient km of a PowerCore filter bed operating under two-stage filtration conditions are presented. Tests were carried out on the characteristics of filtration efficiency and accuracy, as well as o... [more]

Renewable energy is considered to be sustainable solution to the energy crisis and climate change. The transition to renewable energy needs to be considered on a sectoral basis and one such sector that can potentially decarbonized with renewable energy is the telecommunication sector. Several base transceiver stations (BTS) in remote regions have unstable electric supply systems. Diesel generators (DG) are a common solution to energy problems on such telecommunication sites. However, they have high fuel costs on the global market and contribute to high carbon emissions. Hybrid renewable energy systems may provide a stable power output by integrating multiple energy sources, essential for supplying a dependable and uninterrupted power supply in the context of the telecom sector, notably base transceiver stations (BTS). Deploying such a system might also help BTS, which relies mainly on diesel generators with battery storage backup, reduce operational costs and environmental problems. Th... [more]

The shift to renewable sources of energy has become a critical economic priority in African countries due to energy challenges. However, investors in the development of renewable energy face problems with decision making due to the existence of multiple criteria, such as oil prices and the associated macroeconomic performance. This study aims to analyze the differential effects of international oil prices and other macroeconomic factors on the development of renewable energy in both oil-importing and oil-exporting countries in Africa. The study uses a panel vector error correction model (P-VECM) to analyze data from five net oil exporters (Algeria, Angola, Egypt, Libya and Nigeria) and five net oil importers (Kenya, Ethiopia, Congo, Mozambique and South Africa). The study finds that higher oil prices positively affect the development of renewable energy in oil-importing countries by making renewable energy more economically competitive. Economic growth is also identified as a major dri... [more]

The article concerns the verification of links between the energy intensity of public urban transport, regional economic development and urbanisation in the light of sustainable development challenges and club convergence processes. Three research questions were formulated in the article: (1) Does the regional economic development of voivodeships affect the energy intensity of public urban transport? (2) Does urbanisation shape energy consumption patterns in public urban transport (and are there agglomeration effects)? (3) Does the level of urbanisation of voivodeships depend on their regional level? The study covered 16 subregions of Poland from 2010 to 2020. A spatial dynamic exploration of the relationships between energy intensity patterns of public urban transport and the phenomenon of urbanisation and regional economic development was carried out. Panel models of vector autoregression and panel causality testing were used. The influence of the economic development of regions and... [more]

This study concerns the numerical simulation and the experimental implementation of a low-scale Phase Change Material-based (PCM-based) condenser, to be included in a PCM-based portable cooling systems. In this category of cooling systems, the PCM can be integrated either in the condenser or in the evaporator. In the present study, the PCM is integrated in the condenser of the vapor compression cycle to absorb the heat power released from the refrigerant fluid (R134a) during condensation, thus eliminating the need to transfer heat to the external environment. The main objective of the present study is to realize and validate a numerical model capable of simulating both the refrigerant fluid and the PCM thermofluid dynamics. For this purpose, a commercial solver was used for the implementation of the developed numerical model, and experimental tests were performed to validate the numerical simulations results. The paper reports the details and test results of both the numerical model an... [more]

This study focused on Middle Permian Lucaogou Formation saline lake source rocks, utilizing a combination of biomarkers and hydrocarbon generation thermal simulation to analyze their biological compositions, depositional environments, and hydrocarbon generation potential. The Pr/Ph ratio, Ph/nC18 ratio, and Pr/nC17 ratio indicate that the Lucaogou Formation was in a reducing environment during the deposition period, and the lower part of the Lucaogou Formation (P2l1) is more anoxic than the upper part of the Lucaogou Formation (P2l2). The maturity index 20S (%) and ββ (%) reflect that the maturity of organic matter in the P2l1 is slightly higher than that in the P2l2. The G/H index and the ETR index indicate that the stratification of the water column is better during the sedimentary period of Lucaogou Formation and the salinity of the P2l1 is higher than that of the P2l2. The biomarker parameters of nC21−/nC22+, CPI, S/H, and C22T/C21T reflect that the organic matter of the source roc... [more]

The application of fuzzy hybrid methods has significantly increased in recent years across various sectors. However, the application of fuzzy hybrid methods for modeling systems or processes, such as fuzzy machine learning, fuzzy simulation, and fuzzy decision-making, has been relatively limited in the energy sector. Moreover, compared to standard methods, the benefits of fuzzy-hybrid methods for capturing complex problems are not adequately explored for the solar energy sector, which is one of the most important renewable energy sources in electric grids. This paper investigates the application of fuzzy hybrid systems in the solar energy sector compared to other sectors through a systematic review of journal articles published from 2012 to 2022. Selection criteria for choosing an appropriate method in each investigated fuzzy hybrid method are also presented and discussed. This study contributes to the existing literature in the solar energy domain by providing a state-of-the-art revie... [more]

The transition towards climate neutrality will result in an increase in electrical vehicles, as well as other electric loads, leading to higher loads on electrical distribution grids. This paper presents an optimisation algorithm that enables the integration of more loads into distribution grid infrastructure using information from smart meters and/or smart meter gateways. To achieve this, a mathematical programming formulation was developed and implemented. The algorithm determines the optimal charging schedule for all electric vehicles connected to the distribution grid, taking into account various criteria to avoid violating physical grid limitations and ensuring non-discriminatory charging of all electric vehicles on the grid while also optimising grid operation. Additionally, the expandability of the infrastructure and fail-safe operation are considered through the decentralisation of all components. Various scenarios are modelled and evaluated in a simulation environment. The res... [more]

Electrospray ionization (ESI) coupled with high-resolution mass spectrometry (HRMS) is rapidly developing into a powerful tool for the molecular characterization of petroleum fractions. However, the occurrence of ion−molecule aggregates seriously affects the interpretation of the mass spectrometry results. Ion−molecule aggregates are not inherent compounds in petroleum but they are produced during the analysis of petroleum samples by high-resolution mass spectrometry. Also, the classes of aggregates are the same as many compounds in petroleum. Therefore, the removal of these species is crucial, and their analysis from methods of dissociation and mechanism points of view is essential for this purpose. In this study, aggregates of a vacuum gas oil fraction were analyzed and the types were defined. The compositions of the aggregates were characterized by changing operating conditions. Several factors affecting the aggregates were evaluated by a parameter of dissociation efficiency. By est... [more]

The premise of electric vehicles (EVs) participating in the frequency regulation (FR) of power systems is to satisfy the charging demands of users. In view of problems such as the uncertainty of EV users’ departure time and the increase in power supply pressure due to disordered charging in the frequency regulation process of EV clusters, a secondary frequency regulation control strategy with EVs considering user travel uncertainty is proposed. Firstly, EV charging history was analyzed, a reliability parameter was introduced to describe the user travel uncertainty, and an individual EV controllable domain model based on reliability correction was constructed. Then, EV clusters were grouped according to charging urgency and state of charge (SOC), and the controllable capacity of EV clusters was determined. Finally, EV frequency regulation capability parameters and charging urgency parameters were defined to determine the EV frequency regulation priority list, combined with the EV state... [more]

Nowadays, wind power generation has become vital thanks to its advantages in cost, ecological friendliness, enormousness, and sustainability. However, the erratic and intermittent nature of this energy poses significant operational and management difficulties for power systems. Currently, the methods of wind power forecasting (WPF) are various and numerous. An accurate forecasting method of WPF can help system dispatchers plan unit commitment and reduce the risk of the unreliability of electricity supply. In order to improve the accuracy of short-term prediction for wind power and address the multi-step ahead forecasting, this research presents a Stacked Temporal Convolutional Network (S-TCN) model. By using dilated causal convolutions and residual connections, the suggested solution addresses the issue of long-term dependencies and performance degradation of deep convolutional models in sequence prediction. The simulation outcomes demonstrate that the S-TCN model’s training procedure... [more]

Effective implementation of renewable energy sources (RES) is one of the main challenges in regard to the organization of local energy microgrids with buildings. One of the solutions is the use of dynamic building façades with photovoltaic (PV) panels, in particular the innovative perovskite solar cells (PSCs). This paper describes a case study performed on a pilot installation of perovskite PV panels located in Poland, Central-Eastern Europe. Results of preliminary measurements on this installation are provided in terms of verifying its energy efficiency and the possibility of selecting settings for the façade dynamics control system. Our experiments have considered the sun-tracking mechanism and its energy consumption as well as the impact of weather conditions at different times of the year. The energy efficiency results for the PV system, with average levels below 10%, are rather low. Therefore, even small energy savings in the operation of the PV system itself are significant. Cha... [more]

The wave energy converter (WEC) system, which extracts electricity through the relative heave motion of two concentric cylinders, comprises an inner cylinder and a torus-type outer cylinder sliding along the inner cylinder. To maximize the relative heave motion between two cylinders, the natural frequencies of the two cylinders must be precisely tuned to resonate and be situated on each side of the peak frequency of the wave spectrum. However, the demerit of this strategy is that it demands a deep draft of each cylinder for tuning, and a large-scale PTO damping device is necessary for mechanical power amplified by resonance. As an alternative to efficient and stable WECs, we adopt a new strategy in which the outer cylinder follows the incoming waves and the motion of the inner one is restricted to be minimal using a heave disk. The viscous damping due to formation of vortices at the disk edge is realized by the drag force in the Morison equation. The developed hydrodynamic model of two... [more]