PV (photovoltaic) capacity is steadily increasing every year, and the rate of increase is also increasing. A desert area with a large equipment installation area and abundant solar radiation is a good candidate. PV power plants installed in the desert have advantages in themselves, but when combined with desert aquacultures, additional benefits can be obtained while compensating for the shortcomings of the aquaculture industry. The importance of the aquaculture industry is increasing, with aquaculture products approaching half of the total supply of marine products due to sea environmental pollution and reduced resources. Moreover, in deserts, where marine products are difficult to obtain, aquaculture is a good way to save marine products. However, one of the many problems that complicate the introduction of aquaculture in the desert is that it is difficult to supply and demand electricity because the site is not near a viable electric grid. However, combination with PV can solve this... [more]

Solid Oxide Cells (SOCs) are under intensive development due to their great potential to meet the 2030 targets for decarbonization. One of their advantages is that they can work in reversible mode. However, in respect to durability, there are still some technical challenges. Although the quick development of experimental and modeling approaches gives insight into degradation mechanisms, an obligatory step that cannot be avoided is the performance of long-term tests. Taking into account the target for a commercial lifetime is 80,000 h, experiments lasting years are not acceptable for market needs. This work aims to develop accelerated stress tests (ASTs) for SOCs by the artificial aging of the fuel electrode via redox cycling, which follows the degradation processes of calendar aging (Ni coarsening and migration). However, it can cause irreversible damage by the formation of cracks at the interface anode/electrolyte. The advantages of the developed procedure are that it offers a mild le... [more]

Building-integrated photovoltaics (BIPV) have attracted interest due to their capacity to feasibly supply buildings with renewable power generation, helping to achieve net-zero or net-positive energy goals. BIPV systems include many different solutions depending on the application, the PV technology, and the envelope material they substitute. Among BIPV systems, the last two decades have seen a rising interest in transparent and semi-transparent BIPV (T- and ST-BIPV), which add features such as daylighting and solar radiation control. T- and ST-BIPV mainly consist of opaque PV cells embedded in fenestration systems (PV cladding), while most recent research considers semi-transparent PV cells (homogeneous PV glazing) with improved optical properties. The evaluation of T- and ST-BIPV systems in building performance is complex, as it needs to combine optical, thermal, electrical, and daylighting calculations. Therefore, adequate modeling tools are key to the development of these technolog... [more]

This paper presents a strategy for a thermal-structural test with quartz lamp heaters (TSTQLH), combined with an ultra-local model, a closed-loop controller, a linear extended state observer (LESO), and an auxiliary controller. The TSTQLH is a real time ground simulation of aerodynamic heating for hypersonic vehicles to optimize their thermal protection systems (TPS). However, lack of a system dynamic model for the TSTQLH results in inaccurate tracking of aerodynamic heating. In addition, during the control process, the TSTQLH has internal uncertainties of resistance and external disturbances. Therefore, it is necessary to establish a mathematical model between controllable α(t) and measurable T1(t). An ultra-local model of model-free control plays a crucial role in simplifying system complexity and reducing high-order terms due to high nonlinearities and strong couplings in the system dynamic model, and a global nonsingular fast terminal sliding mode control (GNFTSMC) is added to an u... [more]

The paper presents the problem of the effect of air filter pressure drop on the operating parameters of a modern internal combustion engine with compression ignition. A literature analysis of the results of investigations of the effect of air filter pressure drop on the filling, power and fuel consumption of carburetor and diesel engines with classical injection system was carried out. It was shown that each increase in the air filter pressure drop Δpf by 1 kPa results in an average decrease in engine power by SI 1−1.5% and an increase in specific fuel consumption by about 0.7. For compression ignition engines, the values are 0.4−0.6% decrease in power and 0.3−0.5% increase in specific fuel consumption. The values of the permissible resistance of the air filter flow Δpfdop determined from the condition of 3% decrease in engine power are given, which are at the level of 2.5−4.0 kPa—passenger car engines, 4−7 kPa—truck engines and 9−12 kPa—special purpose vehicles. Possibilities of decre... [more]

Vehicle electrification has become an important strategy adopted worldwide, including in Taiwan, as a means to achieving net zero emissions. Taiwan is capable of building a whole light commercial vehicle and has technological strength in producing critical EV parts. This study applies the Bass diffusion model to assess the feasibility of developing eLCV shared architecture in Taiwan and estimates that the annual replacement demand for eLCVs could reach 20,221 units. This exceeds the threshold number of 5000 units, which could motivate the automakers to develop eLCV shared architecture. The simulation result shows that achieving full market penetration would take at least 13 years and would be highly correlated with policy support, the vehicle selling price and the battery pack price. The B2B model is a suitable way of introducing eLCVs into the logistics fleets. In the initial promotion phase, policy support and complementary measures would be needed, e.g., public sectors’ purchases, f... [more]

Solar−thermal conversion and migration characteristics of nanofluids have attracted intensive attention recently. Due to the strong absorption of solar energy, solar collectors with nanofluids have wide applications in many areas including desalination and power generation. Researchers have mainly focused on the macroscopic performance of nanofluids in solar collectors, but the nanoparticles’ migration characteristics with vapor during phase transformation have not been further investigated. Therefore, an experimental investigation on solar−thermal conversion characteristics of nanofluids and migration characteristics with vapor during phase transformation was conducted in this work, in order to verify the enhancement effect of nanoparticles on solar energy absorption and explore the nanoparticles’ migration behavior with vapor. It was found that part of Ag nanoparticles migrate out of the nanofluids with generated vapor by boiling nanofluids, and most of the nanoparticles remained in... [more]

A new paradigm has appeared in the electricity sector with the rapid development of new renewable energy sources, storage systems, information and communication technologies, and ways of integrating distributed energy sources [...]

The performance of proton exchange membrane fuel cells (PEMFCs) is directly affected by the nonlinear variations in water content. To study the variation in water content and its effect on PEMFC performance, the water condensation rate (WCR) model is established, which determines the proportional relationship between evaporation and condensation rates in terms of the switch function, and the two-phase flow evolution and pressure drop are considered as well. The WCR model is imported into Fluent software through a user-defined function for simulation, and the test system is established under different operating conditions. Then, the contours of H2O molar concentrations and polarization curves are analyzed and compared. The results show that the condensation rate value of the cathode channel is from 1.05 to 1.55 times higher than that of the anode channel. The WCR model can predict the variation in water content and improve the accuracy of the performance calculation by from 9% to 31%. T... [more]

The pressure drop of a main steam and reheat steam system should be optimized during the design and operation of a thermal power plant to minimize operation costs. In this study, the pressure drop of the main steam pipe and reheat steam pipe of a 1000 MW secondary reheat unit are optimized by modulating the operation parameters and the cost of operation is explored. Optimal pipe specifications were achieved by selecting a bend pipe and optimizing the pipe specifications. The pressure loss of the main steam pipeline was optimized to 2.61% compared with the conventional pressure drop (5%), the heat consumption of steam turbine was reduced by about 0.63 kJ/(kW·h), the standard coal consumption was minimized by about 0.024 g/(kW·h), and the total income in 20 years is approximated to be CNY 217,700. The primary reheat system was optimized to 4.88%, the steam turbine heat consumption was reduced by about 7.13 kJ/(kW·h), the standard coal consumption decreased by about 0.276 g/(kW·h), and th... [more]

Island-type petrochemical parks have gradually become the ‘trend’ in establishing new parks because of the security advantages brought by their unique geographical locations. However, due to the frequent occurrence of natural disasters and difficulties in rescue in island-type parks, an early warning model is urgently needed to provide a basis for risk management. Previous research on early warning models of island-type parks seldom considered the particularity. In this study, the early warning indicator system is used as the input parameter to construct the early warning model of an island-type petrochemical park based on the back propagation (BP) neural network, and an actual island-type petrochemical park was used as a case to illustrate the model. Firstly, the safety influencing factors were screened by designing questionnaires and then an early warning indicator system was established. Secondly, particle swarm optimization (PSO) was introduced into the improved BP neural network t... [more]

Energy-system scenarios are widely used to relate the developments of the energy supply and the resulting carbon-emission pathways to political measures. To enable scenario analyses that adequately capture the variability of renewable-energy resources, a specialised type of power-sector model (PSM) has been developed since the beginning of this century, which uses input data with hourly resolution at the national or subnational levels. These models focus on techno-economic-system optimisation, which needs to be complemented with expert socioeconomic knowledge in order to prevent solutions that may be socially inacceptable or that oppose political goals. A way to integrate such knowledge into energy-system analysis is to use information from framework scenarios with a suitable geographical and technological focus. We propose a novel methodology to link framework scenarios to a PSM by applying complexity-management methods that enable a flexible choice of base scenarios that are tailored... [more]

This paper details the selection of machine learning models for predicting the effectiveness of a heat pipe system in a concentric tube exchanger. Heat exchanger experiments with methanol as the working fluid were conducted. The value of the angle varied from 0° to 90°, values of temperature varied from 50 °C to 70 °C, and the flow rate varied from 40 to 120 litres per min. Multiple experiments were conducted at different combinations of the input parameters and the effectiveness was measured for each trial. Multiple machine learning algorithms were taken into consideration for prediction. Experimental data were divided into subsets and the performance of the machine learning model was analysed for each of the subsets. For the overall analysis, which included all the three parameters, the random forest algorithm returned the best results with a mean average error of 1.176 and root-mean-square-error of 1.542.

The process of drilling in natural gas hydrate reservoirs in sea areas involves problems such as hydrate decomposition and wellbore instability. To study the response behaviors of a reservoir during the drilling process, a two-dimensional numerical model of drilling fluid invading a hydrate reservoir in a cylindrical coordinate system was established to simulate the processes of heat and mass transfer, gas−liquid two-phase flow, and hydrate formation and decomposition in the hydrate reservoir during the drilling process. Based on the hydrate reservoir at station W17, Shenhu area of the South China Sea, the physical property response of the hydrate reservoir under different drilling fluid temperatures and salinity values was studied. The simulation results showed that during the drilling process, the temperature and pressure of the reservoir respond rapidly in a large area, further promoting the hydrate decomposition in the reservoir around the wellbore and leading to secondary hydrate... [more]

The number of microgrids within a smart distribution grid can be raised in the future. Microgrid-based distribution network reconfiguration is analyzed in this research by taking demand response programs and power-sharing into account to optimize costs and reduce power losses. The suggested method determined the ideal distribution network configuration to fulfil the best scheduling goals. The ideal way of interconnecting switches between microgrids and the main grid was also identified. For each hour of operation, the ideal topology of microgrid-based distribution networks was determined using optimal power flow. The results were produced with and without the use of a demand response program and power-sharing in each microgrid. Different load profiles, such as residential, industrial, commercial, and academic, were taken into account and modified using appropriate demand response programs and power-sharing using the Artificial Bee Colony algorithm. Various scenarios were explored indep... [more]

Currently, the upgrade of existing reinforced concrete (RC) buildings focuses only on energy retrofitting measures due to the current policies promoted in the scope of the European Green Deal. However, the structural deficiencies are not eliminated, leaving the building seriously unsafe despite the investment, particularly in seismic-prone regions. Moreover, the envelopes of existing RC buildings are responsible for their energy efficiency and seismic performance, but these two performance indicators are not usually correlated. They are frequently analyzed independently from each other. Based on this motivation, this research aimed to perform a holistic performance assessment of five different types of masonry infill walls (i.e., two non-strengthened walls, two walls with seismic strengthening, and one wall with energy strengthening). This performance assessment was performed in a three-step procedure: (i) energy performance assessment by analyzing the heat transfer coefficient of each... [more]

China is one of the world’s largest energy consumers and carbon emitters, and the situation of carbon emission reduction is serious. This paper forecasts the future trend of China’s carbon emissions by constructing a system dynamics model of China’s carbon emissions. The results show that China cannot fulfill its commitment to peak its carbon emissions in 2030 as scheduled. Secondly, the Logarithmic Mean Divisia Index model (LMDI) was used to analyze the influencing factors of China’s carbon emissions. The contribution rates of the five factors to China’s carbon emissions are as follows: economic development (226.30%), technological innovation (−105.92%), industrial structure (−26.55%), population scale (11.44%) and energy structure (−5.28%). Finally, this paper formulates five carbon emission reduction paths according to the size and direction of various factors that affect China’s carbon emissions. The paths of carbon emission reduction were simulated by using the system dynamics mod... [more]

For many applications, the possibility of controlling heat flow by “thermal switching” can be very beneficial. In previous work, we presented a novel approach for thermal switching using a water-loaded adsorbent as part of the evaporator of a heat pipe. The basic idea is that the adsorbent releases water upon exceeding a certain evaporator temperature and thus “activates” the heat pipe by providing the working fluid for thermal transport. In this work, we present an improved version of the heat switch. We found that an ordinary copper heat pipe (i.e., thermosyphon) with outer diameters common in heat pipe applications (10 mm) can be used as a base of the heat switch. The reversibility of the switching effect was proven. The location of heat input relative to the adsorbent position was optimized, leading to improved switching ratios of up to 36 as calculated from thermal resistance change between evaporator and condenser. Furthermore, the role of the insulation on thermal resistance and... [more]

Kazakhstan has large reserves of natural resources, including coal, oil, and natural gas. We hope to replace fossil fuels with renewable sources of energy—particularly renewable natural gas. Thus, Kazakhstan, like other countries, should cut its dependency on coal, oil, and natural gas so as to reach net zero carbon emissions by 2050. This study, given that Kazakhstan is an agricultural country with a large amount of organic matter, analyzes the potential of biogas production as a source of electricity and heat. Manure from livestock and poultry was chosen as a source of organic matter. The climate of Kazakhstan in most of its territory is sharply continental, with large temperature differences, which affect the process of anaerobic digestion. Consequently, the features of biogas production in cold regions were analyzed, and the calculation shows that the equivalent of 27,723,802 kWh of calorific energy could be obtained from the anaerobic digestion of livestock and poultry manure, whi... [more]

To convert as much vibration energy as possible into electrical energy, the design of a high-performance piezoelectric vibration energy harvester (PVEH) has been studied widely in recent years. To overcome the low energy utilization of a traditional piezoelectric cantilever by inhomogeneous strain, a uniform stress distribution of bimorph by an ARC mechanical stopper structure has been designed for maximum piezoelectric vibration energy harvesting. Deflection equations and their simulation at the first-order modal of two classic bimorph cantilever beam models, with transverse tip force and with equal curvature, are derived based on the Euler−Bernoulli beam assumption. Piezoelectric energy from a beam model with equal curvature is four times that of a cantilever beam model with transverse tip force at the theoretical level. The nonlinear frequency response performance of bimorphs by an ARC mechanical stopper and point stopper model could be observed by the numerical simulations of the l... [more]

Nowadays the utilization of Electric Vehicles (EVs) has greatly increased. They are attaining greater attention due to their impacts on the grid at the distribution level. However, due to the increased need for electricity, EVs are also used to serve the load in the instance of electrical failure in the distribution systems. This paper presents a new approach to a service restoration method for a low-voltage distribution network at the time of a power outage using existing EVs available in a parking place. The objective function formulated here was a constrained linear optimization model. It aimed to develop priority-based scheduling of the residential user appliances while meeting all the operational constraints if the EV’s power was in a deficit at the hour of the outage. Weight factors were assigned to various residential appliances to decide their priority while scheduling. To substantiate the proposed methodology, a day load profile of a 20 kVA distribution transformer feeding eig... [more]

Within the scope of the presented work, a mathematical model of a prototype of a complex motion transmission on a ship was developed. The abovementioned motion transmission includes long elastic elements with distributed mechanical parameters. The system, containing the motion transmission under consideration, is driven by an engine via epicyclic gearing. The torque is transmitted via a long drive shaft to a propeller working with a variable blade geometry. The rotor of a synchronous generator is mounted on the ship’s long drive shaft. This shaft generator produces electricity that is fed to the ship’s electrical network. With the use of the developed mathematical model, electromechanical transients occurring during the transmission of mechanical power are analyzed. This paper analyzes the motion transmission with the use of computer simulation and presents the results of research.

Background: The purpose of the paper is to propose different arrangements of neural networks for short-time 24-h load forecasting in Power Systems. Methods: The study discusses and compares different techniques of data processing, applying the feedforward and recurrent neural structures. They include such networks as multilayer perceptron, radial basis function, support vector machine, self-organizing Kohonen networks, deep autoencoder, and recurrent deep LSTM structures. The important point in getting high-quality results is the composition of many solutions in the common ensemble and their fusion to create the final forecast of time series. The paper considers and compares different methods of fusing the individual results into the final forecast, including the averaging, application of independent component analysis, dynamic integration, and wavelet transformation. Results: The numerical experiments have shown a high advantage of using many individual predictors integrated into the... [more]

This paper presents a new solution method for the calculation of laminar thermal boundary layers. The method consists of a coupling between a modal method (Galerkin method) in the direction normal to the wall and a finite volume method in the direction(s) tangential to the wall. It is similar to an integral method in the sense that only a surface mesh is required and that the unknowns are integral quantities (corresponding to the moments up to a fixed order of the temperature profile in the direction normal to the wall). A specificity of the Galerkin method used is that the domain over which the integrals are computed has a variable size that is also an unknown of the problem. Using a series of numerical tests (representative of situations that can be encountered in aeronautics in the case of a wing equipped with a thermal ice protection system), we show that the new method allows us to predict the quantities of interest with a maximum error of a few percent, while a usual integral met... [more]

Batteries are widely used in our lives, but the inevitable inconsistencies in series-connected battery packs will seriously impact their energy utilization, cycle life and even jeopardize their safety in use. This paper proposes a balancing topology structure combining Buck-Boost circuit and switch array to reduce this inconsistency. This structure can realize multi-cell-to-multi-cell (MC2MC) battery balancing by controlling the switch array and having a fast balancing speed, easy expansion and few magnetic components. Then, the operation principle of the proposed balancing topology is analyzed, and the simulation model is verified. In addition, the effects of switching frequency and voltage difference on the equalization effect are further analyzed. The results show that the higher the switching frequency, the lower the time efficiency, but the higher the energy efficiency. The voltage difference significantly impacts the duty cycle, so it is absolutely necessary to introduce a variab... [more]