Results-based financing (RBF) programmes in the clean cooking sector have gained increasing donor interest over the last decade. Although the risks and advantages of RBF have been discussed quite extensively for other sectors, especially health services, there is limited research-documented experience of its application to clean cooking. Due to the sheer scale of the important transition from ‘dirty’ to clean cooking for the 4 billion people who lack access, especially in the Global South, efficient and performance-proven solutions are urgently required. This paper, undertaken as part of the work of the UKAid-funded Modern Energy Cooking Services (MECS) programme, aims to close an important research gap by reviewing evidence-based support mechanisms and documenting essential experiences from previous and ongoing RBF programmes in the clean cooking and other sectors. On this basis, the paper derives key strategic implications and learning lessons for the global scaling of RBF programmes... [more]

Some of the frequently used buzz words in the corporate sector include green leadership, green human resource management, green employee engagement and green work-life balance. The intention of this article is to identify and examine the logical reasons that govern “green work-life balance” or, in simple terms, “greenwashing” work-life balance. The paper also aims at providing a comprehensive conceptualization of work-life balance, while thoroughly examining the components of measuring the construct. Based on a cross-sectional study in the banking industry with a sample of 170 managerial employees, this study analyzes the impact of work-life balance on employee job performance mediated by employee engagement. Results support the assumed relationship between work-life balance and employee job performance embedded in employee engagement. The theoretical contribution of this study concerns the application of role behavior theory to describe the mechanisms shaping the relationship between... [more]

Climate change has visible effects with growing dynamics in the last decades [...]

The growing number of variable speed drives (VSDs) in industry has an impact on the future development of condition monitoring methods. In research, more and more attention is being paid to condition monitoring based on motor current evaluation. However, there are currently only a few contributions to current-based pump diagnosis. In this paper, two current-based methods for the detection of bearing defects, impeller clogging, and cracked impellers are presented. The first approach, load point-dependent fault indicator analysis (LoPoFIA), is an approach that was derived from motor current signature analysis (MCSA). Compared to MCSA, the novelty of LoPoFIA is that only amplitudes at typical fault frequencies in the current spectrum are considered as a function of the hydraulic load point. The second approach is advanced transient current signature analysis (ATCSA), which represents a time-frequency analysis of a current signal during start-up. According to the literature, ATCSA is mainl... [more]

The fourth industrial revolution is accelerating industrial automation. In industrial networks, manufacturing processes require hard real-time communication where the latency is less than 1ms. Time-sensitive networking (TSN) technology over Ethernet already supports deterministic delivery for real-time communication. However, TSN technologies over wireless networks are currently in their initial development stage. Therefore, this study presents an overview of TSN research trends in wireless communications. This paper focuses on 5G networks and IEEE 802.11. We summarize standardization trends for TSN in 5G networks and introduce the TSN technologies for 802.11-based WLAN. Then, we introduce the integration scenario of 5GS with WLAN. This study provides insights into wireless communication technologies for wireless TSN.

Due to their common occurrence and fundamental role in human-realized processes and natural phenomena, turbulent flows are subject to constant research. One of the research tools used in these studies are hot-wire anemometers. These instruments allow for measurements in turbulent flows in a wide range of both velocities and frequencies of fluctuations. This article describes a new indirect method of determining the bandwidth shape of a constant-temperature anemometer. The knowledge of this bandwidth is an important factor in the study of the energy spectrum of turbulent flows.

In this paper the results of the tests of the wideband transformation accuracy of medium voltage (MV) inductive voltage transformers (VTs) in the frequencies range from 50 Hz up to 5 kHz are presented. The values of voltage error and phase displacement for transformation of the harmonics of distorted primary voltages are determined. In the case of a typical 50 Hz-type inductive VT with a rated primary voltage equal to (15/√3) kV and (20/√3) kV manufactured by an international company the limiting values of the accuracy classes extension for quality metering required by the standard IEC 61869-6 for the Low Power Instrument Transformers (LPIT) were not exceeded. While, in the same test other MV inductive VTs show poor accuracy and even resonance at multiple frequencies. Unfortunately, this problem also arises from nonlinearity of the magnetization characteristic of their magnetic core. Therefore, for transformation of the sinusoidal voltage in the secondary voltage significant but not ea... [more]

In this paper a new mathematical algorithm is proposed to improve the accuracy of DGPS (Differential GPS) positioning using several GNSS (Global Navigation Satellites System) reference stations. The new mathematical algorithm is based on a weighting scheme for the following three criteria: weighting in function of baseline (vector) length, weighting in function of vector length error and weighting in function of the number of tracked GPS (Global Positioning System) satellites for a single baseline. The algorithm of the test method takes into account the linear combination of the weighting coefficients and relates the position errors determined for single baselines. The calculation uses a weighting scheme for three independent baselines denoted as (1A,2A,3A). The proposed research method makes it possible to determine the resultant position errors for ellipsoidal BLh coordinates of the aircraft and significantly improves the accuracy of DGPS positioning. The analysis and evaluation of t... [more]

This study proposes a building energy simulation (BES) model of an air-to-water heat pump (AWHP) system integrated with a multi-span greenhouse using the TRNSYS-18 program. The proposed BES model was validated using an experimental AWHP and a multi-span greenhouse installed in Kyungpook National University, Daegu, South Korea (latitude 35.53° N, longitude 128.36° E, elevation 48 m). Three AWHPs and a water storage tank were used to fulfill the heat energy requirement of the three-span greenhouse with 391.6 m2 of floor area. The model was validated by comparing the following experimental and simulated results, namely, the internal greenhouse temperature, the heating load of the greenhouse, heat supply from the water storage tank to the greenhouse, heat pumps’ output water temperature, power used by the heat pumps, coefficient of performance (COP) of the heat pump, and water storage tank temperature. The BES model’s performance was evaluated by calculating the root mean square error (RMS... [more]

This a presents an original methodology for designing residential buildings with a positive energy balance. This process is an extremely complex undertaking. So far, no methodology with an open set of decision criteria has been developed that would include the modeling of the decisionmaker’s preferences using statistical surveys of a group of decisionmakers for this purpose. There is also no methodology relating to the interdependence of decision criteria. The present paper presents an original methodology consisting of five stages. The prepared algorithm indicates the need for changes in the classic design of residential buildings, taking into account the decision criteria that show interdependence. The proposed methodology consists in combining three methods of multi-criteria decision support: the DEMATEL method, used to determine the relations between decision criteria; the AHP/ANP method, used to build a model of the decisionmaker’s preferences, and the TOPSIS method, used to creat... [more]

Shadows severely affect the performance of solar photovoltaic (PV) systems. A proper description of this effect is useful for sizing and simulating PV systems when shadows cannot be avoided. Shading factors represent the basis for simulating the effect of shadows on solar modules. These factors can be used to estimate shading losses, calculate their I-V and P-V curves under shading conditions, or develop new maximum power point tracking (MPPT) techniques. Open-source libraries focused on solar energy have gained popularity in recent years. One of the currently most popular ones is the PV_LIB toolbox initially developed by Sandia Laboratories. PV_LIB significantly facilitates solar energy calculations. However, it currently lacks functions for taking into account shaded conditions. In this paper, a detailed Matlab-based method for calculating the shading factors is provided. The method has been used for elaborating a toolbox for shading calculations. The current work could help extend t... [more]

Several methods of defining and estimating the width of a turbulent wake are presented and tested on the experimental data obtained in the wake past an asymmetric prismatic airfoil NACA 64(3)-618, which is often used as tip profile of the wind turbines. Instantaneous velocities are measured by using the Particle Image Velocimetry (PIV) technique. All suggested methods of wake width estimation are based on the statistics of a stream-wise velocity component. First, the expansion of boundary layer (BL) thickness is tested, showing that both displacement BL thickness and momentum BL thickness do not represent the width of the wake. The equivalent of 99% BL thickness is used in the literature, but with different threshold value. It is shown that a lower threshold of 50% gives more stable results. The ensemble average velocity profile is fitted by Gauss function and its σ-parameter is used as another definition of wake width. The profiles of stream-wise velocity standard deviation display a... [more]

Thermal, electrical and mechanical stresses age the electrical insulation systems of high voltage (HV) apparatuses until the breakdown. The monitoring of the partial discharges (PDs) effectively assesses the insulation condition. PDs are both the symptoms and the causes of insulation aging and—in the long term—can lead to a breakdown, with a burdensome economic loss. This paper proposes the convolutional neural networks (CNNs) to investigate and analyze the aging process of enameled wires, thus predicting the life status of the insulation systems. The CNNs training does not require any kind of assumption of how the factors (e.g., voltage, frequency and temperature) contribute to the life model. The experiments confirm that the proposal obtains better estimations of the life status of twisted pair specimens concerning existing solutions, which are based on strong hypotheses about the life model dependency on the factors.

Wave energy is one of the most promising renewable energies available with its very large resource. The waves generated by the wind field are steadier than the wind field itself, rendering wave energy more consistent than wind energy. It is also more predictable than wind and solar. Wave energy is making continuous progress towards commercialisation, and thanks to an increasing number of deployments at sea, the sector is increasing the understanding of the costs and economies of these projects. No wave energy converter has been demonstrated to be commercially viable, and it is yet to be proven that wave energy can contribute to the renewable energy mix. In this context, and in order to find an economically viable solution for exploiting wave energy, it is important to assess the economic potential of a particular concept throughout the entire technological development process. At early development stages, this assessment can be challenging and present large uncertainties. Notwithstandi... [more]

We address the control of a hybrid energy storage system composed of a lead battery and hydrogen storage. Powered by photovoltaic panels, it feeds a partially islanded building. We aim to minimize building carbon emissions over a long-term period while ensuring that 35% of the building consumption is powered using energy produced on site. To achieve this long-term goal, we propose to learn a control policy as a function of the building and of the storage state using a Deep Reinforcement Learning approach. We reformulate the problem to reduce the action space dimension to one. This highly improves the proposed approach performance. Given the reformulation, we propose a new algorithm, DDPGαrep, using a Deep Deterministic Policy Gradient (DDPG) to learn the policy. Once learned, the storage control is performed using this policy. Simulations show that the higher the hydrogen storage efficiency, the more effective the learning.

Strategically critical elements are becoming significant for the rising demand of emerging energy-efficient technologies and high-tech applications. These critical elements are mostly geologically dispersed, and mainly recovered from recycled materials. Coal with high concentrations of critical elements is supposed to stable alternative sources. The abundances of critical elements in coal varies widely among different deposits and regions. The high concentrations of critical elements are found in many Chinese and Russian coal ores. The global mining potential ratio (MPR) is applied and suggests scandium, hafnium, cesium, yttrium, germanium, gallium, thallium, strontium and rare-earth elements could be potential recovery from coal. A number of benefits are expected with the extraction of critical elements during coal utilization.

The component count for the multilevel inverter has been a research topic for the last few decades. The higher number of power semiconductor devices and sources leads to a higher power loss with the complex control requirement. A new multilevel inverter topology employing the concept of half-Bridge modules is suggested in this paper. It requires a lower number of dc sources and power components. The inverter is controlled using a fundamental frequency switching scheme. With the basic unit being able to produce 13 level voltage waveforms with three dc voltage sources, higher-level inverter configuration has also been discussed in the paper. The performance of the topology is analyzed in the aspects of circuit parameters and found better when compared to similar topologies proposed in recent literature. The comparison provided in the paper set the benchmark of the proposed topology in terms of lower component requirements. The topology is also optimized with two voltage fixing algorithms... [more]

Coal-fired power units, now balancing power shortages in the power system, must be characterised by increasingly higher flexibility of operation. This means faster start-ups and the capacity for frequent decreases and increases in the power output. These processes cause large temperature gradients in elements of the power unit and the turbine and lead to an increase in the stress level. At such an operating regime it is impossible to ensure safety based on start-up characteristics only—it becomes necessary to constantly monitor stress levels in critical areas of machinery and equipment elements. The stress level in turbine elements can be monitored on-line using algorithms based on Green’s functions and Duhamel’s integral. This paper presents examples of modifications of stress calculations in turbine valves and casings during start-ups. By modifying basic algorithms, it is possible to take into account the impact of the variability of heat transfer coefficients on the thermal stress l... [more]

The COVID-19 pandemic has set new challenges for the HoReCa industry. Lockdowns have coincided with and strongly impacted the industrial transformation processes that have been taking place for a decade. Among the most important HoReCa transition processes are those related to the rapid growth of the delivery-food market and ordering meals via internet platforms. The new delivery-food market requires not only the development of specific distribution channels, but also the introduction of appropriate, very specific food packaging. Food packaging and its functionality are defined by the administrative requirements and standards applicable to materials that have contact with food and principally through the prism of the ecological disaster caused by enormous amounts of plastic waste, mainly attributed to the food packaging. To meet environmental and administrative requirements, new technologies to produce food packaging materials are emerging, ensuring product functionality, low environme... [more]

Financial liquidity and profitability are two critical phenomena present in the financial economy of a company, whose relations depend on each other and may course in different directions. At the same time, they are an example of the complexity of the problem, which demands a proper approach, allowing one to reconcile two opposing objectives of any enterprise, i.e., maximizing the benefits for the owners and minimizing the risk of losing financial liquidity. Until now, the relationship between liquidity and profitability has not been examined explicitly, using multidimensional methods in particular. Nevertheless, the links between profitability and financial liquidity maintenance ensure the sustainable development of enterprises in different branches. This paper formulates two aims: scientific and practical. The scientific one concerns adopting the canonical variate analysis method to visualize the differences and relationships between food industry companies regarding financial liquid... [more]

In some cases, the oil shale deposited in shallow lakes may be genetically associated with the coal-bearing successions. Although paleovegetation is an important controlling factor for the formation of oil shale- and coal-bearing successions, few studies have focused on their joint characterization. In this study, a total of twenty-one oil shale and coal samples were collected from the upper member of the Lower Cretaceous Muling Formation (K1ml2) in the Laoheishan Basin, and investigated for their bulk geochemical, maceral, palynological, and terpenoid biomarker characteristics, in order to reconstruct the paleovegetation and reveal its influence on the formation of oil shale and coal. The K1ml2 is subdivided into lower, middle, and upper units. The studied oil shale samples from the lower and upper units display a high ash yield (Ad), low total organic carbon (TOC) and sulfur (S) contents, and limited hydrocarbon generation potential. The studied coal samples from the middle unit are... [more]

The increase in the role of companion robots in everyday life is inevitable, and their safe communication with the infrastructure is one of the fundamental challenges faced by designers. There are many challenges in the robot’s communication with the environment, widely described in the literature on the subject. The threats that scientists believe have the most significant impact on the robot’s communication include denial-of-service (DoS) attacks, satellite signal spoofing, external eavesdropping, spamming, broadcast tampering, and man-in-the-middle attacks. In this article, the authors attempted to identify communication threats in the new robot-to-infrastructure (R2I) model based on available solutions used in transport, e.g., vehicle-to-infrastructure (V2I), taking into account the threats already known affecting the robot’s sensory systems. For this purpose, all threats that may occur in the robot’s communication with the environment were analyzed. Then the risk analysis was carr... [more]

In this paper, alkyl aliphatic hydrazine, which is different from traditional polymer fluidity improver, was synthesized from aliphatic hydrazine and cetane bromide, and evaluated as a pour point and viscosity-reducer depressant for crude oil. The evaluation results showed that alkyl aliphatic hydrazone fully reduced the pour point and viscosity of crude oil with the increase of crude oil fluidity. The viscosity reduction rate of crude oil in Jinghe oilfield was 79.6%, and the pour point was reduced by about 11.3 °C. The viscosity reduction rate of crude oil in Xinjiang Oilfield was 74.7%, and the pour point was reduced by 8.0 °C. The long alkyl chain is beneficial to the eutectic of wax in crude oil, and the polar group inhibits the crystal growth, resulting in the decrease of pour point and viscosity. The waste oil is fully recycled into oilfield chemicals.

Climate change and efforts to mitigate it have given rise to an interest in the relationship between industry competitiveness, energy efficiency, and carbon emissions. A better understanding of this relationship can be essential for economic and environmental decision-makers. This paper presents empirical research evaluating industry competitiveness through the factors of energy efficiency and carbon emission in Europe’s most energy-intensive industries. The designed industry competitiveness measure index consists of seven components, grouped into three equally weighted sub-indexes: export performance, energy, and environmental. The export performance of the industry is described by the industry export growth rate, the share of the industry’s export, and the effects on the industry’s competitiveness of changes in a country’s export. The energy intensity of the industry and energy prices are integrated into the energy sub-index. The environmental sub-index consists of the industry’s emi... [more]

Energy efficiency, generation from renewable sources and more recently energy flexibility are key elements of present sustainability policies. However, we are beginning to see a recognition of the need to couple technological solutions with lifestyle and behavioral changes, sometimes labeled under the term “sufficiency”. Appropriate policies and design principles are necessary to enable sufficiency options, which in turn reveal that there is a bidirectional influence between the building and the district/city level. In this context, the authors discuss how city and building re-design should be implemented combining energy efficiency, flexibility, production from renewables and sufficiency options for achieving a positive energy balance at the district level even within the constraints of dense cities. Based on a review of recent advances, the paper provides a matrix of interactions between building and district design for use by building designers and city planners. It also compares po... [more]