The application of intelligent equipment and technologies such as robots and unmanned vehicles is an important part of the construction of intelligent mines, and has become China’s national coal energy development strategy and the consensus of the coal industry. Environment perception and instant positioning is one of the key technologies destined to realize unmanned and autonomous navigation in underground coal mines, and simultaneous location and mapping (SLAM) is an effective method of deploying this key technology. The underground space of a coal mine is long and narrow, the environment is complex and changeable, the structure is complex and irregular, and the lighting is poor. This is a typical unstructured environment, which poses a great challenge to SLAM. This paper summarizes the current research status of underground coal mine map construction based on visual SLAM and Lidar SLAM, and analyzes the defects of the LeGO-LOAM algorithm, such as loopback detection errors or omissio... [more]

The successful and fast development and deployment of renewable energy and greenhouse gas reduction technologies is a continuing and structural challenge. The deployment of these technologies is slowed down and sometimes even stalled due to societal challenges like public resistance, lack of appropriate policy and regulations, unsolid business cases and uncertainty concerning the impact on the environment. In this paper we elaborate on societal aspects that influence technology development and deployment and introduce the societal embeddedness level (SEL) framework. Building upon the technology readiness level (TRL), the SEL framework enables the assessment of the current level of societal embeddedness of energy technologies in order to identify the societal aspects which need to be taken into account to accelerate deployment of energy technologies. The SEL framework takes into account four societal dimensions (impact on the environment, stakeholder involvement, policy and regulations,... [more]

Excess heat can make an important contribution to reduce greenhouse gas emissions in the heating and cooling sector. Due to the local character of heat, the local excess heat potential is decisive for using excess heat. However, the spatially distributed potential and the subdivision of the potential into different subsectors have not been sufficiently investigated in Germany. Here we analyse the excess heat potential in Germany according to different subsectors and spatially distributed to the municipal level. We use data of more than 115,000 records on exhaust gas and fuel input from over 11,000 industrial sites. We calculate the site-specific excess heat potential and check its plausibility using the fuel input of the respective industrial sites. Finally, we compare the excess heat potential with the residential heat demand at the municipal level. Our results show that the excess heat potential in Germany is about 36.6 TWh/a, and that in 148 municipalities, the annual excess heat po... [more]

The Jianghan Basin is a lacustrine basin in central China developing multiple salt bearing deposits in the Eocene with the success of shale oil exploration in the Qianjiang Formation. The lower member of the Xingouzui Formation in the Chentuokou Depression has become another exploration target. However, rapid changes in lithofacies and strong sedimentary heterogeneity limit the exploration progress. This study aimed to explore the sequence division, lithofacies characteristics, and sedimentary environment using sedimentological, X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyses. The sequence stratigraphic analysis indicates that the low member of the Xingouzui Formation is divided into two third-order sequences, namely SQ1 and SQ2, and four system tracts, including highstand systems tract (HST), lake expanding system tract (EST), early highstand system tract (EHST), and late highstand system tract (LHST). Moreover, a total of nine major lithofacies and five lithofacies asso... [more]

Solar-powered adsorption chillers are a particularly interesting alternative to energy-intensive conventional refrigeration systems. Integration of the adsorption chiller with solar collectors is a very promising concept since the increase in solar radiation coincides with the increased demand for cooling. Such a solution is very economical and environmentally friendly. It also fits in with current trends related to energy policy and sustainable development. The article presents the results of tests conducted for a two-bed adsorption chiller integrated with solar collectors. The tests were performed on selected days of the summer period (July and August) at the KEZO Research Centre PAS in Jablonna (Poland). Based on the results obtained, the performance parameters of the adsorption chiller were determined, and the problems associated with the integration of all components of the system were identified and discussed. The values of the determined Coefficient of Performance (COP) and cool... [more]

Many countries are pursuing energy security (ES) in their economies while implementing sustainable development goals (SDGs). Relevant policies may include: (1) access to efficient alternative and preferably renewable energy sources (RESs); and (2) reductions in conventionally obtained energy consumption. As the demand for energy is growing and alternative energy resources are expensive, new ways of financing projects to improve ES are of special interest, e.g., issuing green bonds. In such cases, the obtained funds are allocated to projects that can both improve ES and help to achieve SDGs. The aim of the study was to explore the dependences (in the sense of Granger causality) between the green bond (GB) market, different aspects of sustainable development, as measured by global indicators taken from a family of environmental NASDAQ OMX indices, and ES represented by crude oil prices. The methodology is based on the vector autoregression model. The findings reveal evidence of a short-t... [more]

The purpose of this work is to analyze the electron−nuclear interactions of the vanadyl-porphyrin (VP) complexes in oil asphaltenes. Asphaltenes from the Athabasca oil sands were studied by HYperfine Sublevel CORrelation Spectroscopy (HYSCORE) electron paramagnetic resonance (EPR). It makes it possible to resolve and interpret complex hyperfine spectra of intrinsic VP with strong and weak hyperfine interactions between the electron magnetic moment and various nuclear spins (1H, 14N, 51V). The main parameters of spin-Hamiltonian for the VP spin system are determined. The axially symmetric structure of the VP complexes is revealed, and the local nuclear environment of the paramagnetic center is investigated. The results can be used for the study of asphaltene electron−nuclear structure and asphaltene aggregates with the aim of elucidating asphaltenes’ transformation(s) under the influence of external treatment.

Among the alternatives for improving the thermal comfort conditions inside buildings are the thermally activated building systems (TABS). They are embedded in different building components to improve the indoor air temperature. In this work, a review and analysis of the state of the art of TABS was carried out to identify their potential to improve thermal comfort conditions and provide energy savings. Furthermore, this study presents the gaps identified in the literature so that researchers can develop future studies on TABS. The articles found were classified and analyzed in four sections, considering their implementation in roofs, walls, floors, and the whole envelope. In addition, aspects related to the configuration of the TABS and the fluid (speed, temperature, and mass flow rate) were analyzed. It was found that when TABS are implemented in roofs, walls, and floors, a reduction in the indoor temperature of a building of up to 14.4 °C can be obtained. Within the limitations of th... [more]

China’s high-quality economic development is hampered by market distortions, and promises to achieve peak carbon emissions by 2030, meaning that its economic growth faces serious environmental constraints. We use a heterogeneous stochastic frontier model to analyze the impact of factor market distortions and carbon dioxide emissions on economic growth, and to evaluate the Chinese energy industry’s chain technical efficiency under the influence of factor distortions and carbon dioxide emissions. Finally, the counterfactual measurement method is used to calculate the factor market distortions and loss of the energy industry chain technology efficiency as a result of carbon dioxide emissions. The main research results show that China’s energy technology efficiency is 0.959, and the average energy industry chain technical efficiency for each region from the highest to the lowest is east (0.961), center (0.957), northeast (0.955), and west (0.950). The space for efficiency improvement is 3.... [more]

Taking into account the international policies in the field of environmental protection in the world in general, and in the European Union in particular, the reduction of greenhouse gas (GHG) emissions, and primarily of carbon dioxide, has become one of the most important objectives. This can be obtained through various renewable energy sources and non-polluting technologies, such as the mixing of hydrogen and natural gas. Combining hydrogen with natural gas is an emerging trend in the energy industry and represents one of the most important changes in the efforts to achieve extensive decarbonisation. The importance of this article consists of carrying out a techno-economic study based on the simulation of annual consumptions regarding the construction and use of production capacities for hydrogen to be used in mixtures with natural gas in various percentages in the distribution network of an important operator in Romania. In order to obtain relevant results, natural gas was treated as... [more]

Since the Industrial Revolution, fossil fuels have become the main energy source for economic development. However, fossil fuels have also been linked to serious environmental impacts. China has recently undergone rapid economic growth, but its development model demands large amounts of energy and causes severe pollution. Therefore, there has been a recent shift toward the development of coordinated strategies to achieve economic growth while minimizing energy consumption and preserving the environment. This study sought to explore the spatiotemporal evolution of the coordination degree between economic growth, energy consumption, and environmental conservation (i.e., the “3E” system) in China, thus establishing a basis to improve coordinated development and minimize regional differences. This study evaluated 30 Chinese provinces using mathematical models. Between 2000 and 2019, the coordinated development level of the components of the 3E system in China increased steadily but remaine... [more]

According to the requirements of carbon-neutral development, this study explores the comparison and new discussion of replacing nitrogen with carbon dioxide in the conventional two-phase microfluid flow. Thus, carbon dioxide application in various fields can be more precise and convenient. This research uses an artificially continuously tapering micro model to mimic the natural rock channel in low permeability formation, where the liquid imbibition process is entirely under surface tension-dominant. The tested capillary number decreased to 8.49 × 10−6, and the thinnest observed liquid film was reduced to 2 μm. The comparison results in two gas groups (nitrogen and carbon dioxide) show that CO2 gas fluid in microscopic porous media would have more tendency to snap off and leave fewer residual bubbles blocked between the constrictions. However, the N2 gas fluid forms smaller isolated gas bubbles after snap-off. By combining the experimental data and numerical output with the theoretical... [more]

New methods for state estimation are required due to the complexity of the topology of transmission and distribution systems, and the predictability in the management of prosumer dispatch. This paper describes a pilot project in Greece that, in accordance with OneNet’s architecture, addresses the challenges of congestion and balancing management that system operators face due to the high penetration of renewable energy sources. The respective data requirements and the IT/OT environment are described, as well as the interconnections among the various modules and functionalities. Available resources of the grid’s flexibility are identified, and the implementation of an integrated monitoring system based on efficient forecasting of volatile generation and demand is addressed. Congestion management and frequency and voltage control are in the center of interest of the demonstrator where, in close collaboration with system operators, respective network models are being developed.

Over the years, cities have undergone transformations that, invariably, overload and even compromise the functioning of an energy matrix dependent on increasingly scarce resources. The high demand for energy has challenged stakeholders to invest in more sustainable alternatives, such as bioenergy, which, in addition, helps to reduce the pressure for finite resources, enable the energy recovery of waste and contribute to the mitigation of carbon emissions. For these improvements to be successful, stakeholders need specific technological strategies, requiring tools, methods and solutions that support the decision-making process. In this perspective, the current work aimed to develop a framework optimizing the evaluation of waste bioenergy projects through the application of algorithms. Therefore, a literature review was carried out to select the algorithms and identify the sectors/areas and stages in which they are applied. These algorithms were then grouped into two sequential phases. T... [more]

In this study, a method for the bacterial disinfection of drinking water in the water storage systems based on the electric potential generated from a piezoelectric wind energy harvester is presented. First, an efficient galloping piezoelectric wind energy harvester is designed by adding curve- shaped attachments to the bluff body of the harvester. The simulated output voltage of the harvester is validated by performing different sets of experiments on an open environment. Later, the output voltage of the harvester is enhanced, using copper oxide nanowires (CuONWs) grown perpendicular to the surface of the center copper wire. The enhanced electric field is able to disinfect the bacterial water in a 25 min time period. The bacterial removal log efficiency of 2.33 is obtained with a supplied rms voltage of 0.1 V from the harvester. The findings of this study will help to provide alternate means to water treatment that are efficient, reliable, and also free from disinfection by-products.

The depletion of fossil energy reserves has intensified the interest in renewable energy sources, such as solar energy. Solar water heating represents an environmentally clean technology, with an abundant, permanent, renewable energy source that does not pollute or harm the ecosystem. In this context, the objective of the work was to revisit the theme of residential solar heating in relation to the use of flat-plate solar collectors. This study combined bibliometrics techniques and a systematic literature review. The results indicated that by considering the period from 1993 to 2020, we could find several publications revealing that the interest in this subject still remains high and current. Themes related to water heating and ambient cooling showed consistency in the publications, while studies focused on integrating solar thermal energy with other chemical processes, such as distillation or desalination, indicated that significant research is required in this area.

This paper deals with voltage control in a buck DC-DC converter. In fact, dynamic mathematical equations describing the principle behavior of the above system have been derived. Due to the nonlinearity of the established model, a nonlinear control algorithm is adopted. It is based on the sliding mode control approach. To highlight the performance of the latter, a comparative study with four control algorithms is carried out. The validity of the model and the performance of the conceived algorithms are verified in simulation. Both the system and the algorithm controls are implemented in the Matlab/Simulink environment. Extensive results under different operational conditions are presented and discussed.

The carbon emissions of sectors and households enabled by primary inputs have practical significance in reality. Considering the mutual effect between the industrial sector and the household, this paper firstly constructed an environmentally extended semi-closed Ghosh input−output model with an endogenized household sector to analyze the relationship between carbon emissions and the Chinese economy from the supply-side perspective. The structural decomposition analysis and the hypothetical extraction method were remodified to identify the supply-side driving effects of the changes in carbon emissions and investigate the net carbon linkage. The results show that the electricity, gas, and water supply sector was the key sector with the highest carbon emission intensity enabled by primary inputs. The household sector had an above 93% indirect effect of the enabled intensity, with its enabled intensity dropping significantly by more than 55% from 2007 to 2017. The operating surplus and mix... [more]

Biodiesel is an alternative source of fuel for various automotive applications. Because of the increasing demand for energy and the scarcity of fossil fuels, researchers have turned their attention to biodiesel production from various sources in recent years. The production of biofuels from organic materials and waste components allows for the use of these waste resources in transporting resources and people over long distances. As a result, developing sustainable measures for this aspect of life is critical, as knowledge of appropriate fuel sources, corresponding emissions, and health impacts will benefit the environment and public health assessment, which is currently lacking in the literature. This study investigates biodiesel’s composition and production process, in addition to biodiesel emissions and their associated health effects. Based on the existing literature, a detailed analysis of biodiesel production from vegetable oil crops and emissions was undertaken. This study also c... [more]

In order to fulfill the commitment of China to achieve carbon peak by 2030 and carbon neutrality by 2060, all industries have been taking their respective carbon reduction actions. The transportation industry accounts for 11% of CO2 emission of the whole society, and its energy conservation and carbon reduction benefit is of great significance to the national carbon reduction process. New energy vehicles are undoubtedly one of the most important means of carbon emission reduction in the transportation sector. However, electric vehicles still have CO2 emissions, as the fossil fuel use comes from upstream power. To systematically and comprehensively evaluate the CO2 emissions of HEV, PHEV and BEV in the whole process, this study introduces the life-cycle method to research on the past and current situations, and predict future scenarios for ICEV and EV light-duty vehicles at the national and regional levels, by deeply analyzing the generation mix and generating efficiency from the WTT st... [more]

There is a development trend for fuel vehicles to adopt low-carbon emission engines. The sales of cars with low-carbon three-cylinder engines in the Chinese market have declined. Is the life cycle of automotive products with three-cylinder engines entering a recession stage? In order to achieve this research objective, which is to investigate whether assembling a three-cylinder engine affects the life cycle of an automotive product, this paper constructs an ecological theory-based approach to measuring the life cycle of automotive products. First, the logistic model is used to measure the intrinsic growth rate, internal inhibition coefficient, and theoretical upper limit of product sales scale before and after the automotive products are equipped with three-cylinder engines. In the second stage, the Lotka−Volterra model is used to calculate the intrinsic growth rate, internal inhibition coefficient, theoretical upper limit, and symbiosis coefficient of the sales scale of the products b... [more]

The sustainable development of enterprises is based on three pillars: economic, social, and environmental. Sustainable development aims to limit climate change and its negative impact on the natural environment. The main aim of this paper is to assess the impact of selected energy economy factors (government expenditure, environmental taxes, outlays on renewable energy sources, prices of futures contracts for CO2 emissions, outlays on R&D, and the EU Emissions Trading System (ETSEU)) on the sustainable development of the energy sectors in Bulgaria, Czechia, Estonia, and Poland, from 2008 to 2022. We use the correlation coefficients, the Ordinary Least Squares (OLS), Vector Autoregressive (VAR) Models, and the simultaneous equation. The research results indicate a variation in the direction and strength of the influence of individual economic factors in the studied countries (p < 0.05). The results can support operational and strategic decisions sustaining the sustainable development... [more]

Water, energy, and food are indispensable for sustainable economic development. Despite nutrients, especially phosphorus and nitrogen, being essential for plant growth and thus food supplies, those present in wastewater are considered an environmental burden. While microbial fuel cells (MFCs) are receiving much interest, combining wastewater treatment with an MFC has emerged as an option for low-cost wastewater treatment. Among others, a constructed wetland (CW) coupled with an MFC (CW-MFC) has the potential to provide a low carbon footprint and low-energy wastewater treatment, as well as nutrient and energy recovery from wastewater. Findings from this review show that the organic and nutrient removal and power generation by the integrated CW-MFC systems are affected by a number of factors including the organic loading rate, hydraulic retention time, system design, plant species, dissolved oxygen, substrate/media type, influent feeding mode, electrode materials and spacing, and externa... [more]

Carbon Capture Utilization and Storage (CCUS) is a set of technologies aimed at capturing carbon dioxide (CO2) emissions from point-source emitters to either store permanently or use as a feedstock to produce chemicals and fuels. In this paper, the potential benefits of CCUS integration into the energy supply sector are evaluated from a Life Cycle Assessment (LCA) perspective by comparing two different routes for the CO2 captured from a natural gas combined cycle (NGCC). Both the complete storage of the captured CO2 and its partial utilization to produce dimethyl ether are investigated. Moreover, the assessment is performed considering the region-specific features of two of the largest CO2 emitters in Europe, namely Italy and Poland. Results shows that the complete storage of the captured CO2 reduces Global Warming Potential (GWP) by ~89% in Italy and ~97%, in Poland. On the other hand, the partial utilization of CO2 to produce dimethyl ether leads to a decrease of ~58% in Italy and ~6... [more]

This study presents an analysis of the potential uses of BIM for managing the maintenance and refurbishment of existing housing assets to propose thermal comfort and energy efficiency guidelines for future social housing projects in Brazil. To do so, a case study analysis of a residential development with social−environmental certification in the city of Garanhuns, Pernambuco, Brazil was performed, and a literature review on the use of BIM for residential unit maintenance was conducted. The standard house in the residential development was found to be noncompliant with the Brazilian standard for ventilation openings (NBR 15.220). Therefore, three alternative layouts were created and analyzed to meet the requirements of the standard as well as the needs of the residents. The authors recommend that socio-environmental certifiers use BIM models so that energy performance and other simulations can be carried out. The study also proposes guidelines for BIM implementation in future governmen... [more]