Solid hydrochar (HC) produced by hydrothermal carbonization (HTC) of tomato plant biomass from a greenhouse (GH) was assessed for different inhouse applications, including fuel, seed germination, and leached GH nutrient feed (GNF) wastewater treatment. Completed experiments showed encouraging results. HC was revealed to be an efficient renewable fuel, having peat-like characteristics with high heating value of about 26.0 MJ/kg and very low clinker forming potential. This would allow the use of HC as fuel for GH heating as a substitute to costly natural gas, or it could be commercialized after pelletizing. Experiments with soil application showed substantial potential for the produced HC in better seed germination of tomato plants. Another benefit from use of the produced HC is as a soil additive, which would also contribute to environmental emission reduction. Results suggest that the generated HC can remove about 6−30% of nutrients from leached-GNF wastewater. This would be an essenti... [more]

In 2017, China made an ambitious statement of high-quality development (HQD) with which to realize the goals of sustainability proposed by the United Nations. Our paper sheds new light on how the corporate high-quality development is affected by the responsibility system for environmental protection targets using a sample of energy-intensive firms from 2003 to 2018. We calculate the indexes for corporate high-quality development using entropy weighting for the five dimensions: efficiency, innovation, openness, greenness, and social responsibility. Then, we develop a difference-in-differences model to reveal that the responsibility system for environmental protection targets significantly dampens high-quality development of corporations, as the estimated coefficient is −0.0420 with a t-statistic of −2.9384. In contrast with private firms, the high-quality development of state-owned firms shows no significant correlation with environmental policy constraints. The efficiency of capital al... [more]

The growth of renewable energy facilities worldwide creates new challenges for sustainable regional development. Unregulated investment flows in the green energy sector cause disparities in the deployment of various renewable energy technologies, worsen the ability to balance national energy systems, etc. This article is the first comprehensive study that offers a methodology for multifactor modeling of investment flows in regional green energy deployment considering the priorities of national, regional, and local authorities within the sustainable development concept. The proposed methodological approaches help (1) determine the types of renewable energy technologies for priority development in the region, (2) select specific green energy projects to receive budgetary support on territories, and (3) form the optimal mechanism for budget financing distribution on regional development of renewable energy technologies. The modeling factors include natural conditions and resource base of... [more]

In the present work, the contemporary exhaust gas treatment systems (EGTS) used for SOx, PM, and NOx emission mitigation from shipping are reviewed. Specifically, after-treatment technologies such as wet scrubbers with seawater and freshwater solution with NaOH, hybrid wet scrubbers, wet scrubbers integrated in exhaust gas recirculation (EGR) installations, dry scrubbers, inert gas wet scrubbers and selective catalytic reduction (SCR) systems are analyzed. The operational principles and the construction specifications, the performance characteristics and the investment and operation of the reviewed shipping EGTS are thoroughly elaborated. The SCR technology is comparatively evaluated with alternative techniques such as LNG, internal engine modifications (IEM), direct water injection (DWI) and humid air motor (HAM) to assess the individual NOx emission reduction potential of each technology. Detailed real data for the time several cargo vessels spent in shipyards for seawater scrubber i... [more]

The pressure bleed-down/build-up (B/B) testing is enforced by the Bureau of Safty and Environmental Enforcement (BSEE) regulations in the US for gas-leaking wells with recurrent casing head annular pressure dubbed “Sustained Casing Pressure” (SCP). The bleed down test involves bleeding the pressure with a needle valve. Once the pressure reached to zero or stabilized, the valve is closedand a 24-h pressure monitoring starts. Analysis of the tests mandated by regulations involves merely a qualitative assessment of the low or high level of environmental risk measured by leak size. A quantitative analysis—based on mathematical models—has been already proposed and used for sizing cement leaks but the models give ambiguous results due to oversimplifying assumptions of the cement leak system and disregard for the testing procedure. This work addresses shortcomings of the current B/B testing and analysis methods by approaching the testing procedure as a source of useful information about the s... [more]

Several studies have reported that the hydrothermal carbonization method (HTC) of agricultural waste is able to produce a solid residue with interesting properties for the adsorption of organic pollutants from contaminated water. This work represents a facile method to prepare hydrochar (HC) from pomegranate peels’ waste using the microwave-assisted hydrothermal carbonization method (MHTC) at 200 °C for 1 h with a mass ratio of peel to water = 1:10. Activated hydrochar (AHC) was prepared by in situ chemical activation using ZnCl2 and MHTC. Several techniques have been applied to characterize the prepared samples as FTIR, XRD, TEM and SEM. The samples were investigated for their possible use as adsorbents of methylene blue (MB) dye. The results confirm the formation of amorphous hydrochar with a porous structure. The pH of zero point charge (pHzpc) is 4.3 and 4.6 for HC and AHC samples, respectively. The maximum adsorption capacity of HC and AHC samples are 194.9 and 12.55 mg/g (i.e., m... [more]

The developed production of heat (steam) by Farmutil Company enables use of renewable energy from biofuel meat-bone meal which is incinerated in rotary kilns utilising vapours and odours from its production, instead of natural gas, to ensure Farmutil’s own needs for heat. The transformation of existing district heating in Piła city (currently using coal) into a fourth generation district heating system was proposed, predicting the use of heat (hot water) after combustion of biofuel meat-bone meal as district heating in the city of Piła. The maximum possible surplus amount of heat that can be produced at Farmutil exceeds the needs for the district heating demands of the city of Piła (860,200 GJ/y) by 53.2% at a meat-bone meal burning scale of 150,000 t/y. The use of 52,000 t/y of meat-bone meal for district heating production also results in an increase in incomes through the sale of hydroxyapatite ash from its combustion, amounting 1.638 million EUR/y. The closure of the coal-fired hea... [more]

Environmental protection, sustainable development, quality, and value have become the goals of societal development in the twenty-first century. As the core of environmental protection, the new energy sector has become a widespread trend. In this article, we will look at how well and how satisfied customers are with the energy market’s service. A literature review of energy sector quality and value issues was conducted. The survey was conducted in 2021 in Poland with over 2404 respondents by the CAWI survey. Additionally, it was given a qualitative analysis. In the next step, we applied selected quality management methods and tools. The results of the study clearly show that the respondents expect energy companies to become more involved in building customer−enterprise relationships. Research shows that employees of energy companies should be trained more often in the field of customer service, especially in terms of an individual approach to the customer, which has value for the custo... [more]

In Poland, coal-based thermal energy for cooling power plant installations uses a large amount of surface water. Historically, there have been cases of limitations in electricity supply due to low water levels and high temperature of water in rivers. Moreover, environmental requirements limit the possibility of using water resources for cooling purposes, pointing to the necessity to leave inviolable flows in rivers. This raises questions about the future of the operation of thermal power plants with open cooling systems and hence the research undertaken by the authors. The research consisted of a questionnaire survey, hydrological analyses, the impact assessment of climate change on the operation of power plants, and a discussion of technical solutions for water abstraction and power loss analysis in a particular power plant. The results indicate that there are power plants that are more sensitive to hydrological and environmental conditions and the temperature of the water required fo... [more]

The analytical hierarchy process (AHP) was utilized to determine the optimal location on which to install flat-plate solar thermal collectors for residential buildings in a number of cities in Iran under diverse climatic conditions. The payback period of investment (IPBP) was chosen as one of the decision criteria, while payback periods of energy and greenhouse gas emissions (EPBP and GGEPBP), being two recently introduced concepts, were also taken into account to provide a broader insight from the energy, economic, and environmental (3E) benefits of the system. The novelty of this work is proposing a method to find places with the greatest potential to install flat-plate solar collectors. It was performed using AHP as a systematic decision-making tool, and based on energy, environmental, and economic criteria, which are the key aspects of an energy system. Codes developed in the MATLAB software were employed to determine the values for different investigated cities. According to the r... [more]

The present study seeks to select the most important articles and reviews from the Web of Science database that approached alternative fuels towards the decarbonization of the maritime sector. Through a systematic review methodology, a combination of keywords and manual refining found a contribution of 103 works worldwide, the European continent accounting for 57% of all publications. Twenty-two types of fuels were cited by the authors, liquefied natural gas (LNG), hydrogen, and biodiesel contributing to 49% of the mentions. Greenhouse gases, sulfur oxide, nitrogen oxide, and particulate matter reductions are some of the main advantages of cleaner sources if used by the vessels. Nevertheless, there is a lack of practical research on new standards, engine performance, cost, and regulations from the academy to direct more stakeholders towards low carbon intensity in the shipping sector.

In recent years, local energy markets (LEMs) have been introduced to empower end-customers within energy communities at the distribution level of the power system, in order to be able to trade their energy locally in a competitive and fair environment. However, there is still some challenge with regard to the most efficient approach in organising the LEMs for the electricity exchange between consumers and prosumers while ensuring that they are responsible for their electricity-related choices, and concerning which LEM model is suitable for which prosumer or consumer type. This paper presents a hierarchical model for the organisation of agent-based local energy markets. According to the proposed model, prosumers and consumers are enabled to transact electricity within the local energy community and with the grid in a coordinated manner to ensure technical and economic benefits for the LEM’s agents. The model is implemented in a software tool called Grid Singularity Exchange (GSyE), and... [more]

In Europe, the recent application of regulations oriented to zero-energy buildings and climate neutrality in 2050 has led to a reduction in energy consumption for heating and cooling in the construction sector. The thermal insulation of the building envelope plays a key role in this process and the requirements about the maximum allowable thermal transmittance are defined by country-specific guidelines. Typically, high insulation values provide low energy consumption for heating; however, they may also entail a risk of overheating in summer period and thus negatively affect the overall performance of the building. In addition, the embodied energy and related emissions caused by the manufacturing and transportation processes of thermal insulation cannot be further neglected in the evaluation of the best optimal solution. Therefore, this paper aims to evaluate the influence in terms of embodied and operational energy of various walls’ thermal insulation thicknesses on residential buildin... [more]

Over operation time, there are a number of internal and external factors that change the characteristics of dielectric materials that are part of the electrical equipment. In areas with high pollution, an important requirement is the acidic chemical compounds in the soil in which the power cables are laid, which penetrate the insulation by infiltration, resulting in changes in the parameters of electrical insulation and causing a decrease in operating time. The paper is focused on the analysis, through a series of experimental determinations, of the effects of stresses to which the power cables laid in acidic environments are subjected, by simulating the operating conditions in the laboratory, obtaining concrete results. It also describes the direct current test installation used in the laboratory and presents the two stages of testing the cable sample inserted in the electrolyte, the first being a stage of accelerating the degradation of the insulation by supplying higher voltages to... [more]

In recent years, the development of energy prices in Germany has been frequently accompanied by criticism and warnings of socio-economic disruptions. Especially with respect to the electricity sector, the debate on increasing energy bills was strongly correlated with the energy system transition. However, whereas fossil fuels have rapidly increased in price recently, renewable substitutes such as green hydrogen and synthetic fuels also enter the markets at comparatively high prices. On the other hand, the present fossil fuel supply is still considered too low-priced by experts because societal greenhouse gas-induced environmental impact costs are not yet compensated. In this study, we investigate the development of the price gap between conventional energy carriers and their renewable substitutes until 2050 as well as a suitable benchmark price, incorporating the societal costs of specific energy carriers. The calculated benchmark prices for natural gas (6.3 ct kWh−1), petrol (9.9 ct k... [more]

Waste from street cleaning is usually of a fine fraction below 10 mm and varies greatly in both quantity and composition. It may be composed of chlorides, especially for that resulting during winter due to the use of street de-icing agents. Chlorides can cause the salinization of surface water and groundwater, and the salinization of soils, which in turn lead to the deterioration of water purity and a decrease in biodiversity of aquatic organisms, changes in microbiological structure, and increases in toxicity of metals. Therefore, it is very important to determine the level of salinity in stored waste and its impact on the environment. The present study was conducted in a city of about 55,000 inhabitants. The highest chloride concentrations were observed after winter in waste from street and sidewalk cleaning around the sewer gullies, amounting to 1468 mg/dm3. The lowest chloride concentration in this waste occurred in summer and amounted to 35 mg/dm3. The multi-criteria analysis indi... [more]

Reinforcement learning has emerged as a potentially disruptive technology for control and optimization of HVAC systems. A reinforcement learning agent takes actions, which can be direct HVAC actuator commands or setpoints for control loops in building automation systems. The actions are taken to optimize one or more targets, such as indoor air quality, energy consumption and energy cost. The agent receives feedback from the HVAC systems to quantify how well these targets have been achieved. The feedback is captured by a reward function designed by the developer of the reinforcement learning agent. A few reviews have focused on the reward aspect of reinforcement learning applications for HVAC. However, there is a lack of reviews that assess how the actions of the reinforcement learning agent have been formulated, and how this impacts the possibilities to achieve various optimization targets in single zone or multi-zone buildings. The aim of this review is to identify the action formulat... [more]

The rotating biological contactor (RBC) is resistant to toxic chemical and shock loadings, and this results in significant organic and nutrient removal efficiencies. The RBC system offers a low-energy footprint and saves up to 90% in energy costs. Due to the system’s low-energy demand, it is easily operable with renewable energy sources, either solar or wind power. An RBC was employed to degrade pollutants in domestic wastewater through biodegradation mechanisms in this study. The high microbial population in the RBC bioreactor produced excellent biological treatment capacity and higher effluent quality. The results showed that the RBC bioreactor achieved an average removal efficiency of 73.9% of chemical oxygen demand (COD), 38.3% of total nitrogen (TN), 95.6% of ammonium, and 78.9% of turbidity. Investigation of operational parameters, disk rotational speed, HRT, and SRT, showed the biological performance impact. Disk rotational speed showed uniform effluent quality at 30−40 rpm, whi... [more]

Partial shade condition is a significant factor contributing to the PV panel performance in mismatch losses and power generation. The technique suggested in this study allows the physical rearrangement of the PV panel to distribute the shade on the entire PV array. MPPT, selecting suitable inverter topology, or PV panel reconfiguration enhances the performance of the PV panel. This study proposes a new shade dispersing method, novel shade dispersion (NSD). It compares the performance of the NSD method with conventional configurations (CCs). This research article models and simulates 6 × 6 PV array configurations such as Series-Parallel (SP), Total-Cross-Tide (TCT), Bridge-Linked (BL), Honey-Comb (HC), and the newly proposed NSD method under non-shading and nine different partial shading cases. The performance indices used for comparative analysis are global maximum power points, efficiency, power enhancement, open circuit voltage, short circuit current, and number of crests. The Soltec... [more]

Life Cycle Assessment is widely utilized to investigate the influences on global greenhouse gas emissions of various humankind activities and products [...]

Strawberry runners (transplants) in many regions of the world are produced in soils treated with chemical fumigants to control pathogens and weeds and meet phytosanitary requirements. Many fumigants, however, are under threat of withdrawal because of concerns over their impact on the environment (e.g., methyl bromide). The current study considered the use of microwaves for heat disinfestation of soil for field-grown runners for the first time. Results from two field experiments showed that microwave treatment reduced the survival of buried inoculum of the strawberry pathogens Fusarium oxysporum (by up to 93%) and Sclerotium rolfsii (by up to 100%) compared with untreated soil. Furthermore, the treatment reduced the subsequent growth of these pathogens in the laboratory by up to 82% and 100%, respectively. Microwave treatment also reduced the natural DNA concentration of Pythium spp. (clades I & F) in soil by up to 94% compared with untreated soil. The effect of microwave against soilbo... [more]

This study investigates the capability of the Southeast Mesohellenic Trough (SE MHT) sandstone formations to serve as a potential reservoir for CO2 storage in response to the emerging climate change issues by promoting environmentally friendly mineral sequestration applications. Sandstone samples, for the first time, were evaluated for their petrographic characteristics, mineral chemistry, geochemical properties, as well as their petrophysical and gas adsorption properties through tests. The sandstones were tested and classified into distinct groups. The most promising site to be considered for pilot CO2 storage testing is the Pentalofos Formation locality since its sandstones display specific mineral phases with the proper modal composition to conceivably react with injected CO2, leading to the development of newly formed and stable secondary mineral phases. The gas adsorption results are also more encouraging for sandstones from this sedimentary formation. All the measured UCS (uniax... [more]

Slum/informal settlements are an integral part of a city, with a population projected to reach 3 billion by 2030. It is also expected that the rate of waste generation will more than triple by 2050 in the cities of low-income countries of sub-Saharan Africa. At this rate, the risk to the environment and health of inhabitants are enormous, because the current waste management practices are not guided by legislation on proper use and disposal. This paper proposes the conversion of waste to energy as a solution to this problem. The aim of this study is to apply the PROMETHEE technique with a combination weighting method to obtain the most appropriate waste-to-energy technology for the slum/informal settlements of the Greater Karu Urban area in Nigeria. The findings reveal that the gasification technology outperformed the other technologies, and the affordability of electricity supply from this technology was determined by a general survey conducted on the slum/informal settlements.

Energy-efficient and sustainable technologies are necessary to lower energy and carbon footprints. Many technologies are being pursued to meet the increasing energy demand in buildings. An attractive option is efficient utilization of available energy resources, including renewables, to support current and future building energy needs while targeting grid resiliency, energy, and environmental security at an affordable cost via on-site cogeneration-based approaches. This must include energy-efficient technologies with lower greenhouse gas emissions and optimized cost, performance, and reliability. This paper presents the economic and environmental benefits associated with power technologies such as thermionics and solid oxide fuel cells. Hybrid configurations consisting of heat pumps, power systems, and renewable photovoltaics in cogeneration and trigeneration modes of operation are presented. The role of such technologies in lowering CO2 emissions while improving energy resiliency and... [more]

Wastewaters generated by crude oil extraction processes, called “produced waters” (PWs), are complex solutions that contain organic compounds, mainly hydrocarbons, and often exhibit high salinity. The large amounts of PWs represent a global issue because of their environmental impact. An approach widely used in the oil industry is the reinjection of this wastewater into the extraction wells after a suitable treatment. The high salt concentration of such solutions may be used in salinity gradient technologies to produce green electricity. Among these technologies, reverse electrodialysis (RED) is one of the most promising. In this work, the application of RED for energy generation from two different real oil industry brines was investigated. An experimental campaign was performed by testing 10 × 10 cm2 units in long-run continuous operations, monitoring the performance for more than 25 days. Fouling phenomena, occurring during the continuous operation, decrease the unit performance and... [more]