Dairy farms are challenged to increase productivity while achieving environmental sustainability, where greenhouse gas (GHG) emissions are at the center of the discussion. The U.S. dairy industry leadership has committed to a Net Zero Initiative to achieve GHG neutrality, but the specifics on how to achieve this are still uncertain. Life cycle assessment methods were used to quantify GHGs and net energy intensity (NEI) of a large (1000 cows) and a small (150 cows) farm in Wisconsin. The GHGs are 1.0 and 1.3 kg CO2-eq/kg FPCM and the NEI is 2.4 and 3.2 MJ/kg FPCM for the large and small farm, respectively. The GHG benefits from anaerobic digestion (AD, sized to process all manure on both farms) and PV (sized to match AD electricity production) are not enough to achieve GHG neutrality. Increasing the capacity of these systems showed that AD is more cost-effective for the larger farm, but the challenges and costs related to securing and disposing the extra manure needed for energy product... [more]

It has been identified that improving building energy efficiency is an effective method to reduce greenhouse gas (GHG) emissions. Although standards have been established to satisfy a building’s minimum energy demand while ensuring the comfort of its residents, they are difficult to implement in mixed-humid regions. This study proposes a hybrid ventilation strategy that can comprehensively reduce cooling, heating, and ventilation energy in mixed-humid climate regions to significantly decrease the primary energy demand and reduce the impact of buildings on the environment. This study evaluated the changes in energy saving potential and thermal comfort according to the extension of the natural ventilation period and passive strategies, such as decentralized ventilation. Changes in indoor air temperature, operative temperature, and PMV for each strategy were analyzed. As a result, extending the natural ventilation and the decentralized ventilation strategies can save 32% and 34% of the bu... [more]

Ventilation is becoming increasingly important to improve indoor air quality and prevent the spread of COVID-19. This study analyzed the indoor air quality of office spaces, where occupants remain for extended periods, among multi-use facilities with an increasing need for ventilation system application. A “tool for office space CO2 prediction and indoor air quality improvement recommendation” was developed. The research method was divided into four steps. Step 1: Analysis of indoor air quality characteristics in office spaces was carried out with a questionnaire survey and indoor air quality experiment. Based on the CO2 concentration, which was found to be a problem in the indoor air quality experiment in the office space, Step 2: CO2 concentration prediction tool for office spaces, which requires inputs of regional and spatial factors and architectural and equipment elements, was developed. In Step 3: Development and verification of prediction tool considering economic feasibility, t... [more]

This study is an attempt to suggest a new state system of permafrost monitoring, primarily for energetic infrastructure, based on past approaches and achievements in Russia for over a hundred years of Arctic studies. The methodology of this study is based on general theoretical methods of scientific research. Historical (retrospective analysis of the development of the monitoring system of long-term permafrost in Russia) and logical (inductive generalization) methods were applied. The structure and methods of permafrost monitoring in the Soviet Union and new technologies used nowadays to establish permafrost monitoring systems, taking into account modern Arctic energetic development, have been analyzed.

The cement industry confronts significant challenges in raw materials, energy demands, and CO2 emissions reduction, which are global and local environmental concerns. Life cycle assessment (LCA) has been used in many studies to assess the environmental impact of cement production and investigate ways to improve environmental performance. This study aims to analyse the environmental impact of Portland cement (CEM I) on the South African cement industry using the life cycle impact assessment (LCIA), based on the Recipe 2016 v 1.04 midpoint method. The study was conducted using data modeled after the South African cement plant, considered a cradle-to-gate system boundary, starting from the extraction of the raw material to the cement production process that produces cement as the main product. The data were obtained from the Ecoinvent database v3.7.1, integrated with SimaPro 9.1.1. software, used to assess the impact categories. For simplicity, the study merged the entire production proce... [more]

Sustainable biofuel production is the most effective way to mitigate greenhouse gas emissions associated with fossil fuels while preserving food security and land use. In addition to producing bioenergy, waste biorefineries can be incorporated into the waste management system to solve the future challenges of waste disposal. Biomass waste, on the other hand, is regarded as a low-quality biorefinery feedstock with a wide range of compositions and seasonal variability. In light of these factors, biomass waste presents limitations on the conversion technologies available for value addition, and therefore more research is needed to enhance the profitability of waste biorefineries. Perhaps, to keep waste biorefineries economically and environmentally sustainable, bioprocesses need to be integrated to process a wide range of biomass resources and yield a diverse range of bioenergy products. To achieve optimal integration, the classification of biomass wastes to match the available bioprocess... [more]

Renewable energy has become a crucial factor for circular economies, sustainable development, and the environment given the limited non-renewable energy reserves and global environmental degradation mainly resulting from non-renewable energy use. This study explores the effect of educational attainment and economic growth on renewable energy use in a sample of selected emerging markets over the 2000−2018 period through causality and cointegration analyses. Causality analysis points out a significant unidirectional causality from indicators of educational attainment and economic growth to renewable energy use. In other words, educational attainment indicators and economic growth are significant determinants of renewable energy in the short run. Furthermore, the cointegration analysis ascertains a positive influence of indicators of educational attainment and economic growth on renewable energy use in the long run. The findings of both analyses indicate that educational attainment and ec... [more]

A company’s productivity and success measure its effectiveness. This article presents the problem of economic efficiency and aspects related to environmental protection. The basic parameters analysed were the engine type and how it affects the environment. Over three months, the analysis was carried out and used the data envelopment analysis. As a result of the research carried out, the comparison of the amount of fuel used with the amount of transported goods should answer the following questions: What type of engine should be ordered for new trucks to show the best efficiency during operation? What is the efficiency of the currently used engines? How do they affect the environment? The method proposed in the article makes it possible to define the initial requirements for the definition of truck units, which is included in the conclusions of this paper.

The fulfillment of the sustainable development goals of the United Nations (UN) in remote communities undoubtedly goes through the consequent development of the energy supply system (ESS). Structuring a procedure for modeling the ESS, according to development requirements, is vital for decision making. This publication reviews the main methods for designing local development programs that apply a sustainable livelihoods approach and a group of modeling tools for ESS. The necessary criteria are verified to structure a model that integrates the expectations of sustainable development, through the indicators of sustainable livelihoods (SLs), with the requirements of the ESS and the use of available renewable energy resources. In the review carried out, it is found that the methods of analysis and planning of sustainable local development are disconnected from the models for energy planning. On the other hand, the relationship of the indicators for calculating SLs with the characteristics... [more]

As the time spent by people indoors continues to significantly increase, much attention has been paid to indoor air quality. While many IAQ studies have been conducted through field measurements, the use of data-driven techniques such as machine learning has been increasingly used for the prediction of indoor air pollutants. For the present study, the concentrations of indoor air pollutants such as CO2, PM2.5, and VOCs in child daycare centers were predicted by using an artificial neural network model with three different training algorithms including Levenberg−Marquardt, Bayesian regularization, and Broyden−Fletcher−Goldfarb−Shanno quasi-Newton methods. For training and validation, data of indoor pollutants measured in child daycare facilities over a 1-month period were used. The results showed all the models produced a good performance for the prediction of indoor pollutants compared with the measured data. Among the models, the prediction by the LM model met the acceptable criteria... [more]

This paper presents an analysis of the literature that studies the possibility of sewage sludge being used in the cement industry to reduce carbon dioxide emissions from cement production and thus solve the problem of disposing of sewage sludge so that it is no longer stored, avoiding soil pollution with heavy metals, and reducing pressure on the environment. The ash of sewage sludge is a good pozzolanic material, because when it is finely ground, it can be used as a partial substitute for Portland cement. This reduces waste storage costs. Sewage sludge ash was mixed with cement, and it was analyzed to determine whether the paste obtained could be used as a raw material in the cement industry. The presented results are on the hydration characteristics of the sewage sludge ash, the compressive strength of the cement determined after different days, the workability of the cement, and the porosity of the cement paste and the ash.

There are myriad questions that remain to be answered in greenhouse gas (GHG) emissions trading. This article addresses carbon dioxide (CO2) emission factors and carbon losses from heavy equipment that is used to transport ores. Differences occurred between the Intergovernmental Panel for Climate Change (IPCC) emission factor and those that were obtained by considering incomplete combustion and on-site exhaust concentration measurements. Emissions from four off-road vehicles were analyzed. They operated at idle (loading, unloading, and queuing) and in motion (front and rear, loaded and unloaded). The results show that the average CO2 emission factors can be as low as 64.8% of the IPCC standard value for diesel fuel. On the other hand, carbon losses can be up to 33.5% and energy losses up to 25.5%. To the best of the authors’ knowledge, the method that was developed here is innovative, simple, useful, and easily applicable in determining CO2 emission factors and fuel losses for heavy ma... [more]

Worldwide, in the rotary kilns of cement plants, various amounts of combustible waste are burned, which would otherwise end up in municipal landfills. The paper first analyzes the literature on the co-processing of waste in cement manufacture and its influence on the environment and human health. Then, it shows how the combustion components of co-processed waste can influence the final characteristics of clinker and cement. The main objective of the paper is to determine the level of emissions of the resulting pollutants (total dust and flue gases: NOx, SO2, and CO) at the outlet of the chimney of the clinker kiln and flour mill to meet the requirements of the Integrated Environmental Permit (EIA) from Romania and present an estimation of the level of atmospheric air pollution using the climatological model of pollutant dispersion. Following these assessments (data shown), the cement factories will establish measures to reduce the pollution, if necessary, to comply with the regulations... [more]

The study shows that the current network of hydrometeorological observation in the permafrost zone of Russia is insufficient to provide data for the statistical approaches adopted at the state level for engineering surveys and calculations. The alternative to the financially costly and practically impossible expansion of the monitoring network is the development of hydrological research stations and the implementation of new methods for calculating streamflow characteristics based on mathematical modeling. The data of the Kolyma Water-Balance Station, the first research basin in the world in a permafrost environment (1948−1997), and the process-based hydrological model Hydrograph are applied to simulate streamflow hydrographs in remote mountainous permafrost basins. The satisfactory results confirm that mathematical modeling may substitute or replace statistical approaches in the conditions of extreme data insufficiency. The improvement of the models in a changing climate requires the... [more]

Drivers for industrial energy efficiency are factors that promote the sustained adoption of energy-efficient measures and practices. Leveraging drivers to overcome barriers and encourage action which improves industrial energy efficiency can contribute to closing the energy efficiency gap. In fossil-fuel-based systems, this will also contribute to greenhouse gas abatement. A systematic literature review was used to investigate how knowledge about drivers is generated and whether prevalent drivers can be mapped to existing taxonomies. The systematic literature review confirmed that surveys and/or interviews with managers from countries who are members of the Organisation for Economic Cooperation and Development (OECD) are the most common way to gather data on drivers for industrial energy efficiency. This means the extant knowledge on drivers may be incomplete because contributions from some stakeholders, industry types and company sizes may be missing. The review also found economic dr... [more]

With economic development, the output of municipal sludge (MS) continues to increase, and the effective utilization of corn straw (CS) also plays an important role in promoting “carbon neutrality”. The mixed combustion of solid wastes is a very environmentally friendly technology; however, little research has occurred regarding the combustion characteristics and reaction kinetics of MS and CS in a fluidized bed. Therefore, this study used a micro-fluidized bed and process mass spectrometer to evaluate the mixed-combustion characteristics of MS and CS and analyze the effects of the temperature and mixing ratios on the reaction rate. Isothermal kinetics were used to calculate the activation energy, pre-exponential factors, and other kinetic parameters of this reaction. The results showed that with an increasing reaction temperature, the combustion reaction rate of MS and CS under different mixing ratios increased. The reaction rate of mixed combustion of MS and CS was greater than that o... [more]

Using straw and herbaceous crops to replace or augment fossil fuels is becoming popular as access to forest biomass becomes environmentally stricter and more expensive. The low bulk density raw biomass is pre-processed and densified into pellets to facilitate handling and use. Dust is generated during collection, baling and debaling, grinding, drying, and densifying processed herbaceous biomass. Abundant literature deals with dust generated during the industrial handling of woody biomass, grains, and other crops like cotton. But the information on handling herbaceous biomass in the open literature is scarce. This paper reviews the available literature on dust generation from handling and processing of herbaceous biomass. Limited available data shows that herbaceous biomass species have a lower ignition temperature than woody biomass. The paper identifies several crucial pieces of information needed to ensure safety in the handling and pelleting of herbaceous crops.

This paper presents an assessment of the impact of the COVID-19 pandemic on the waste management sector, and then, based on laboratory tests and computer calculations, indicates how to effectively manage selected waste generated during the pandemic. Elemental compositions—namely, C, H, N, S, Cl, and O—were determined as part of the laboratory tests, and the pyrolysis processes of the above wastes were analysed using the TGA technique. The calculations were performed for a pilot pyrolysis reactor with a continuous flow of 240 kg/h in the temperature range of 400−900 °C. The implemented calculation model was experimentally verified for the conditions of the refuse-derived fuel (RDF) pyrolysis process. As a result of the laboratory tests and computer simulations, comprehensive knowledge was obtained about the pyrolysis of protective masks, with particular emphasis on the gaseous products of this process. The high calorific value of the pyrolysis gas, amounting to approx. 47.7 MJ/m3, encou... [more]

In recent years, the dramatic increase of greenhouse gases concentration in atmosphere, especially of carbon dioxide, determined many researchers to investigate new mitigation options. Thermodynamic studies play an important role in the development of new technologies for reducing the carbon levels. In this context, our group investigated the phase behavior (vapor−liquid equilibrium (VLE), vapor−liquid−liquid equilibrium (VLLE), liquid−liquid equilibrium (LLE), upper critical endpoints (UCEPs), critical curves) of binary and ternary systems containing organic substances with different functional groups to determine their ability to dissolve carbon dioxide. This study presents our results for the phase behavior of carbon dioxide + n-butanol structural isomers binary systems at high-pressures. Liquid−vapor critical curves are measured for carbon dioxide + isobutanol and carbon dioxide + tert-butanol binary systems at pressures up to 147.3 bar, as only few scattered critical points are av... [more]

The Central and South Pacific have significant wave energy resources distributed through the region that are currently not being explored. Even though the wave energy resource in the Pacific has been studied, there is limited knowledge on the potential obstacles when inserting this new energy source into a unique and unexplored environment. Pacific Island countries (PICs) have distinctive characteristics that can become barriers to this technology, especially considering that local coastal and marine systems are fundamental for subsistence and local development. Thus, the success of a project relies on local acceptance. The current study developed an integrative conceptual framework for the PICs (ICFPICs) that derived from the integration of the elements of a political, economic, social, technological, environmental and legal (PESTEL) structured approach and further combined with a strengths, weaknesses, opportunities and threats (SWOT) approach to create a matrix that included relevan... [more]

Risk management is critical for corporate finance management systems, in addition to corporate social responsibility (CSR) and sustainable development (SD) programs. Stakeholders need risk information to make informed judgments as to their involvement. No studies exist to date concerning disclosure of non-financial and financial risks in corporate annual statements and Polish strategic sector company reports. The authors sought to determine whether energy companies disclosed risks in non-financial annual reports in 2011−2020 (e.g., CSR, integrated, and board activity reports), and whether one can assess threats, including business activity risks and SD, based on these reports. We assessed the reports of all large Polish energy companies on a three- and five-degree scale to develop a model for risk information disclosures. We have three key empirical findings. Only half the analysed companies disclose annual financial data, threats, and risks. Less than half have implemented and operate... [more]

Today, the study of thermal systems that take advantage of residual thermal sources in the power generation sector is of great importance to mitigate environmental impact and promote sustainable alternatives in this sector. Among these alternatives, the organic Rankine cycle (ORC) is of great relevance since it allows taking advantage of residual energy sources at low temperatures. This work presents a methodology to evaluate the feasibility of using a refrigerant as a working fluid in an organic Rankine cycle based on an exergetic viability index. As a case study, R134a, R600a, R245fa, and R123 refrigerants were considered. A residual thermal source was used that came from the Hybrid Cycle Plant of the Valley of Mexico. Thermodynamic analysis was performed to determine generated power, thermal efficiency, refrigerant mass flow, pinch point temperature difference, specific steam consumption, unused thermal exergy flow, exergy efficiency, and total heat transfer requirement. The weighte... [more]

Among all the activities in a society, construction has a key role in environmental, social, and economic pillars. Construction is also responsible for a considerable amount of waste production, energy consumption, pollutant gas emissions, and consumption of nonrenewable natural resources. Regarding energy consumption, a high demand for building operational energy has been observed in the last decades due to the more demanding requirements of the users with a continuous search for better thermal comfort in their homes, namely in developed countries. In Portugal, for instance, more than 20% of the electricity consumed is related to residential buildings, which is based on CO2 emissions and other pollutants that negatively affect the environment. Much of this consumed energy is a result of the HVAC systems installed inside buildings to provide users with thermal comfort. One exciting opportunity to mitigate buildings’ operational energy consumption while contributing to thermal user comf... [more]

The Earth is permanently surrounded by cloud cover that, particularly, is an essential component in the planet’s energy balance. In turn, cloud cover intervenes in the main conditioning factor for soil temperature: solar radiation. In particular, the soil thermal amplitude should be dampened with the attenuation of solar radiation. However, the scientific community rarely analyzes this relationship, neglecting the model that is used to estimate the soil temperature. In this context, the present study seeks to reformulate the model by inserting a variable referent to cloud cover. Thus, to achieve this objective, a physical-mathematical review of the heat flow in the vertical profile of soil is performed. The reformulated model indicates the influence of cloud cover, intervening for both the soil’s heating (nighttime period) and cooling (daytime period). Finally, the reformulated model should be employed to estimate the soil thermal behavior (in particular, on “overcast sky” days).

Ongoing climate change most pronounces itself in northern latitudes, including in the Arctic zone of the Russian Federation (AZRF). Climate change is a complex multidirectional process that is characterized by both positive and negative effects on the functioning of territorial economic systems. In this regard, an analysis of the impacts of climate change on economic development is a particularly urgent scientific and practical task that requires comprehensive study. This research was devoted to assessing the probable impacts of climate transformations on the parameters of the economic development of the AZRF regions. The authors created a methodological approach to the assessment of the costs of the effects of climate change for the economy of the AZRF regions, taking into account the average predicted dynamics of surface air temperature and key regional economic specializations, as well as the degree of susceptibility of various industries to the climate change. The energy industry w... [more]