Restrictions on emissions are being imposed by regional and international shipping organisations, which raise the question of which marine fuel and technology can most effectively replace heavy fuel oil and diesel engines. The aim of this study is to find appropriate advanced combined gas and steam turbine cycles for marine propulsion systems in a large container ship with respect to the evolving maritime environmental regulations. The selection criteria are the thermodynamic performance, emissions, size, and weight of advanced combined gas and steam turbine cycles in a large container ship. Two baselines are used: a diesel engine using marine diesel oil and a combined gas and steam turbine system using liquefied natural gas and marine diesel oil. Then, liquefied natural gas cycles are examined based on fuel replacement and enhanced to assess the benefits of liquefied natural gas over marine diesel oil. The results show that the enhanced liquefied natural gas combined gas and steam tur... [more]

This Special Issue of Energies contains the successful invited submissions [...]

The purpose of this article is to investigate whether the wide scope of supply chain collaboration including both customers and suppliers (Upstream−downstream External Collaboration) determines the greening of innovation more significantly than the scope limited only to suppliers (Upstream External Collaboration) or customers (Downstream External Collaboration). This goal was achieved as part of extensive research on the impact of relational capital on the innovativeness of high-tech companies in Poland. The results of the research were analysed using fuzzy conversion scales and descriptive statistics based on triangular fuzzy numbers. The application of the achievements of the fuzzy sets theory made it possible to test the hypotheses presented in the article with the use of fuzzy analysis of variance (fuzzy ANOVA). The findings confirm that the subjective scope of collaboration in the supply chain is important for greening innovation. Companies that cooperate with both suppliers and c... [more]

The heat recovery of hot exhaust air in petroleum refining for energy cogeneration is a circular strategy to reduce costs and environmental impact. Despite several articles on this subject, there is a lack of study on the assessment of the economic and environmental advantages of energy cogeneration in petroleum refining. The objective of this research was to evaluate the economic and environmental gains obtained by energy cogeneration from the heat dissipated in the calcination of green petroleum coke. The research method was a case study in a petrochemical industry in Brazil. From an economic point of view, the cogeneration unit project has shown positive results: a discounted payback period of eight years and nine months, net present value (NPV) over a span of a twenty-year period of US$43,825,592, a return on investment (ROI) estimated to be 14%, and an internal rate of return (IRR) of 12%. From an ecological perspective, the produced energy in the cogeneration process reduced 163,... [more]

Based on new policies of the European Union, green technologies are to be mostly considered for power generation. Hydropower generation is one of the essential elements of sustainable energy production. Therefore, specific attention, both economically and technically, needs to be given to this sector of energy production. The Vistula River in Poland is considered an international waterway. The power production potential of the river has been taken into account over the years. However, further configurations are needed to obtain a more in-depth ecological knowledge-base and economic plans, which are socially approved. In an attempt to make the project environmentally friendly, specific attention was put into sustainable transport. Different methods of transport were researched to find the most renewable transport combination, mainly based on waterways. Having performed a cost−benefit analysis related to the economic aspects of the project, it was found that such an investment is highly... [more]

The article presents an extended computer model of a HTS (high temperature superconducting) 21 MVA 70/10.5 kV transformer with severalfold compound windings, based on a verified PSpice model of 10 kVA transformer with single windings. Two superconducting tapes: SCS12050 (with a copper stabiliser layer) and SF12050 (without a stabiliser) were used in the windings. The circuit model of the transformer developed in the PSpice environment considers Rhyner’s power law and the Jiles−Atherton description of the magnetic hysteresis loop. Two types of transient states were analysed: switching on a superconducting transformer to the network and an emergency short-circuit of the secondary winding. For the first five unidirectional current pulses generated when connecting an unloaded transformer to the network, the values of the pulse duration (γ angle), the temperature increase in the primary winding as well as the mean and effective values of the switch-on current were calculated. The waveforms... [more]

Intense economic, social and environmental changes are creating new challenges for both consumers and businesses. Today’s consumer is becoming increasingly conscious of the importance of living in harmony with both ethical standards and the environment. Access to global resources, including utilities such as water, sewage collection, electricity or gas, is so ubiquitous that modern man cannot imagine functioning without them. The aim of this article is to show how the statistical Polish consumer has, or wants to have, an impact on improving the quality of the natural environment by using available resources and technological solutions. The novelty here is the use of the structural equation model (SEM) to build a model of pro-environmental behaviors in relation to the motivating and limiting factors for undertaking such behaviors in Poland. The hypothesis that the statistical Polish consumer undertakes pro-environmental behaviors because of their positive impact on the natural environme... [more]

Global CO2 concentration level in the air is unprecedently high and should be rapidly and significantly reduced to avoid a global climate catastrophe. The work indicates the possibility of quickly lowering the impact of changes that have already happened and those we know will happen, especially in terms of the CO2 emitted and stored in the atmosphere, by implanting a virgin ivy plant on the available area of walls and roofs of the houses. The proposed concept of reducing CO2 from the atmosphere is one of the technologies with significant potential for implementation entirely and successfully. For the first time, we showed that the proposed concept allows over 3.5 billion tons of CO2 to be captured annually directly from the atmosphere, which makes even up 6.9% of global greenhouse gas emissions. The value constitutes enough high CO2 reduction to consider the concept as one of the applicable technologies allowing to decelerate global warming. Additional advantages of the presented conc... [more]

To date, hydropower dams raise numerous interpretations about their impact on the Lancang-Mekong River. While most research studies analyze the negative aspects of hydropower development on people’s livelihoods and local environments, the hydropower sector was historically one of the most iconic economic segments facilitating transboundary water cooperation for decades. By using the constructive discourse analysis and critical political ecology approach, the presented text (1) outlines the current environmental narratives over the Lancang-Mekong hydropower development and (2) explores the politicization of the Chinese mainstream dams. The data were collected upon the multi-level content analysis of relevant sources and double-checked with the Lancang-Mekong Cooperation and Conflict Database (LMCCD) monitoring over 4000 water-related events among six riparian countries between 1990 and 2021. Our data show that (i) there is a stark contrast in positive and negative narratives over the ra... [more]

The paper presents a design and operation analysis of an Integrated Collector Storage (ICS) solar water heater, which consists of an asymmetric Compound Parabolic Concentrating (CPC) reflector trough, while the water tank comprises two concentric cylinders. The annulus between these vessels is partially depressurized and contains a small amount of water in the bottom of the outer vessel which dominantly contributes to the heat transfer from the outer to the inner cylinder. A multi-criteria optimization algorithm is applied to re-evaluate the design specifications of the parabolic surface, thus modifying the design of the entire ICS system and predict the necessary number of units for achieving the highest possible effectiveness with minimized fabrication costs and environmental impacts. The environmental footprint of the device is assessed through Life Cycle Assessment (LCA). The produced thermal energy in conjunction with the environmental and economic results are evaluated as a funct... [more]

Enterprises’ green technology innovation is critical to achieving the “win-win” of enterprise competitiveness and environmental protection. The impact of environmental regulation on green technology innovation by enterprises has been widely considered, but the conclusion has not yet been determined, and needs to be studied in detail. To this end, we studied the impact of pollution charge policy on different types of green technology innovation by industrial enterprises in China. We found that (1) the impact of pollution charges on most types of green technology innovation by enterprises has increased significantly over time; (2) the pollution charge policy has a certain inhibition effect on the end-of-pipe technology innovation, but can promote the process improvement of reducing industrial wastewater emissions; (3) there is a U-shaped relationship between the pollution charges and some green technological innovation (e.g., emission intensity of SO2, industrial wastewater emission inte... [more]

The Ukrainian renewable energy sector has demonstrated a significant increase in its renewable power capacity, especially for solar and wind power plants. Decommissioning the end-of-life equipment in Ukraine has not yet taken place, but it is only a matter of time. With this in mind, this paper assesses the quantities and the market values of the materials that could potentially be recovered from used solar and wind power plants, and it estimates the impact of their decommissioning on employment in Ukraine. It has been estimated that approximately 8.9 GW of solar power plants, and 3.6 GW of wind power plants, will be decommissioned from 2044 to 2059, and that the cost of the raw materials recovered could reach EUR 421.4 million and EUR 124.6 million in 2021 prices, respectively, compared to the decommissioning costs of EUR 240.1 million and EUR 49.1 million, respectively. Decommissioning renewable power plants will require the creation of new jobs, including 11.6 thousand in the solar... [more]

The reconstruction of ageing thermal power plants with the possibility of their increased efficiency, prolonged service and decreased environmental impact is an intensely debated and researched topic nowadays. Among various concepts, the replacement of the steam cycle by a supercritical CO2 cycle is proposed with the prospect of reaching higher efficiencies at the same working fluid inlet parameters as the ultra-supercritical steam cycles. A paper published previously by Rogalev et al. (2021) analyzed the variants of supercritical coal power plant reconstruction to a supercritical CO2 cycle and ranked them according to the cycle efficiency. This contribution comments on the scope and applied method in that paper aiming to provide additional input relevant to the decision-making process on thermal power plant reconstruction to such a cycle.

In this study, confluent jets ventilation (CJV) supply devices with three different nozzle arrays (1 × 19, 2 × 19, 3 × 19) were investigated both numerically and experimentally at two different airflow and supply air temperature set-ups. The performance of the CJV supply devices was investigated concerning thermal comfort, indoor air quality (IAQ), and heat removal effectiveness in a conference room environment. A comparison between the experimental and numerical results showed that the  ϑ2¯−f model had the best agreement out of the investigated turbulence models. The numerical results showed that the size of the array had a great impact both on near-field development and on the conditions in the occupied zone. A larger array with multiple rows and a lower momentum conserved the inlet temperature and the mean age of the air better than a single-row array with a higher momentum. A larger array with multiple rows had a higher IAQ and a greater heat removal effectiveness in the occup... [more]

Synthetic Natural Gas (SNG) is the most researched option for a Power-to-Fuel pathway in Germany after hydrogen, having the advantage of being compatible with the existing infrastructure. However, it is not clear under which conditions SNG is economically and environmentally advantageous compared to natural gas usage, since this is determined by a complex interplay of many factors. This study analyzes the technical, economic and environmental aspects of a pilot SNG plant to determine the key parameters for profitable and sustainable operation. The SNG plant was simulated in Aspen Plus® with CO2 from biogas production as a feedstock and with hydrogen provided by a 1 MWel electrolyzer unit. A life cycle analysis (LCA) was undertaken considering several impact categories with a special focus on global warming potential (GWP). An SNG cost of 0.33−4.22 €/kWhth was calculated, depending on factors such as operational hours, electricity price and type of electrolyzer. It was found that the CO... [more]

The paper presents the experimental measurements of thermal efficiency of a tubular direct absorption solar collector (DASC) with a hybrid nanofluid based on magnetite (Fe3O4) and multi-walled carbon nanotubes (MWCNT). The volumetric concentration of Fe3O4 and MWCNT was 0.0053% and 0.0045%, respectively. The experiments were carried out for the flow rates of 2−10 L/min and a temperature difference up to 20 ∘C between the environment and the DASC. The performance of the DASC with a hybrid nanofluid was in the range of 52.3−69.4%, which was just beyond the performance of the collector with surface absorption. It was also found that using a MWCNT-based nanofluid with an equivalent total volumetric concentration of particles (0.0091%), the efficiency was 8.3−31.5% higher than for the cases with the hybrid nanofluid.

The Saudi Arabian climate, generally speaking, is known to be hot and arid. Even with its extensive energy resources, Saudi Arabia is not immune to the demands of climate change. Over 50% of the country’s electricity is consumed by residential buildings. For economic, fiscal, and environmental reasons, government policy is to stem the profligate use of finite energy resources. It is incumbent on the Saudi building industry to adapt to changing conditions by re-assessing the choice of materials and the design and lay-out of new buildings to help quell demands for air-conditioning during the hotter parts of the year. Throughout the country, electricity consumption doubles in the summer months. Given this situation, this study explores the indoor thermal environment typical of residential buildings. The study selected one house located in a hot dry climatic region as a case study. The features of the house were assessed to determine the permeable features that require improvement. Two mai... [more]

The underestimation of fuel consumption impacts various aspects. In the vehicle market, manufacturers often advertise fuel economy for marketing. In fact, the fuel consumption reference value provided by the manufacturer is quite different from the real-world fuel consumption of the vehicles. The divergence between reference fuel consumption and real-world fuel consumption also has negative effect on the aspects of policy and environment. In order to effectively promote the sustainable development of transport, it is urged to recognize the real-world fuel consumption of vehicles. The gaps in previous studies includes small sample size, single data dimension, and lack of feature weight evaluation. To fill the research gap, in this study, we conduct a comparative analysis through building five regression models to forecast the real-world fuel consumption rate of light-duty gasoline vehicles in China based on big data from the perspectives of vehicle factors, environment factors, and driv... [more]

The subject matter discussed in the article concerns the problem of the energy transformation of the European Union (EU) countries. In the case of the EU, the energy transformation has specific characteristics due to formal legal and institutional provisions. This means that the member states are obliged to implement the adopted Community Energy Strategy, which was defined under the European Green Deal. According to the EU policy, all member states are to have climate-neutral and zero-gas-emission economies by 2050. The energy transformation is to be largely based on the diversification of the energy sources used, with a dominance of renewable energy sources (RES). The article presents a research problem, where the question was asked whether achieving climate-neutral energy independence based solely on RES is possible at the regional level. It seems that the positive answer is an important argument in the discussion about the possibility of all member states achieving the goals set und... [more]

Metal hydroxides, owing to their catalytic active sites for the decomposition of O3 to Reactive Oxygen Species (ROS), have been adapted for catalytic ozonation of micropollutants in wastewater. In this study, commercial Mg (OH)2 was used for the degradation of cyclophosphamide (CYP) by ozone. The crystal phase was confirmed by X-ray powder Diffraction (XRD). Percent degradation of 10 ppm CYP after 30 min by O3 and Mg (OH)2/O3 was 56 and 93, respectively, suggesting enhanced decomposition of O3 to ROS by the catalyst. The presence of ROS was further confirmed using pCBA as a probe, which showed that the concentration of ROS was eight times higher in the presence of Mg (OH)2/O3 than O3 alone. Catalytic ozonation experiments in the presence of scavengers showed that OH· radicals play a significant role in the degradation of CYP. The catalyst was found to be reusable for at least three cycles without significant loss in degradation efficiency. To study the compatibility of Mg (OH)2 for was... [more]

This paper presents a scalable IoT architecture based on the edge−fog−cloud paradigm for monitoring the Indoor Environmental Quality (IEQ) parameters in public buildings. Nowadays, IEQ monitoring systems are becoming important for several reasons: (1) to ensure that temperature and humidity conditions are adequate, improving the comfort and productivity of the occupants; (2) to introduce actions to reduce energy consumption, contributing to achieving the Sustainable Development Goals (SDG); and (3) to guarantee the quality of the air—a key concern due to the COVID-19 worldwide pandemic. Two kinds of nodes compose the proposed architecture; these are the so-called: (1) smart IEQ sensor nodes, responsible for acquiring indoor environmental measures locally, and (2) the IEQ concentrators, responsible for collecting the data from smart sensor nodes distributed along the facilities. The IEQ concentrators are also responsible for configuring the acquisition system locally, logging the acquir... [more]

This paper presents a conceptual development of sustainability evaluation, through an exergy-based indicator, by using the new concept of the Thermoeconomic Environment (TEE). The exergy-based accounting methods here considered as a background are Extended Exergy Accounting (EEA), which can be used to quantify the exergy cost of externalities like labor, monetary inputs, and pollutants, and Cumulative Exergy Consumption (CExC), which can be used to quantify the consumption of primary resources embodied in a final product or service. The new concept of bioresource stock replacement cost is presented, highlighting how the framework of the TEE offers an option for evaluating the exergy cost of products of biological systems. This sustainability indicator is defined based on the exergy cost of all resources directly and indirectly consumed by the system, the equivalent exergy cost of all externalities implied in the production process and the exergy cost of the final product.

Real-time Simulation (RTS) is one of the effective means via which to study device level or system level dynamics, such as power converter online testing, evaluation, and control, and power system stability analysis. The RTS -enabled design-chain offers a time -effective, low-cost, and fail-safe development process. As the penetration of renewable energy is becoming higher, the demand in hybrid system real-time simulation becomes imperative, where fast-dynamic device level power converters and slow -dynamic large -scale power systems are simulated at the same time. This paper introduces a novel hybrid real-time simulation architecture based on the central processing unit (CPU) and the field-programmable gate array (FPGA). Compared with the off-the-shelf power system real-time simulation system, it offers both wide time scale simulation and high accuracy. The multi-time scale model can perform electromechanical electromagnetic transient hybrid simulation, which can be applied to the res... [more]

The increased adoption of intermittent renewable sources in the energy sector has also increased the use of battery storage systems. However, the negative impact which the improper disposal of batteries has on the environment has stirred debates on its sustainability. To ensure the proper disposal of battery waste, there is a need to identify and rank the most preferred battery ‘end-of-life’ handling alternatives. This paper focuses on identifying the most preferred ‘end-of-life’ handling alternatives for batteries using a modified triangular intuitionistic fuzzy aggregating and ranking function (TIFARF) model. To test the proposed modified TIFARF model, opinions from experts in the Nigerian renewable energy sector were collected, and the results show that the most preferred alternative is incineration, with a closeness coefficient of 0.130, while the least preferred alternative is recycling, whose closeness coefficient is 0.112. The results are an indication of a lack of facilities ne... [more]

Baking ovens are necessary to be installed in a paint shop of assembly automotive manufacturers for drying the paint of automotive bodies (i.e., in the coating process). In this process, a large amount of heat is provided by burning the natural gas in the gas burner. Practically, the design of the heat confinement in the oven is often poor, which results in considerable heat losses (i.e., waste heat) which are released during the drying process and significantly raise the temperature of a working environment thereby lowering the thermal comfort of the factory staff. To address this issue and limit the waste heat transfer to the surroundings, the application of a waste heat recovery system of a specific design employing the organic Rankine cycle (ORC) may be a viable alternative solution. A combined design of such a system utilizing an evaporator and thermal energy storage (TES) device in a simple ORC layout will be discussed in this article. The obtained simulation result was computed... [more]