In the European Union, the building sector accounts for more than 40% of final energy consumption, contributing to the deterioration of the quality of the environment. Among the various solutions that aim to reduce the negative environmental impact caused by the operation of buildings, solar hot water systems (SHW) are popular. The choice of a SHW system is associated with the comfort of use and the access to low-cost energy. The design guidelines include the technical parameters for system operation such as materials, dimensions, sizing and operation temperatures. However, the legitimacy of choosing a particular solution and the available technical parameters are key issues. In the presented study, a multi-criteria analysis was proposed as a basis for the proper selection of system parameters, e.g., collector type, solar tank volume. A model of the SHW system was used to calculate the possible solutions, ensuring the same comfort of usage for several design options. The analyzed model... [more]

This study empirically examines the effect of economic development on carbon emissions and revisits the environmental Kuznets curve in Suzhou, China. The study made use of the Gross Domestic Product Per Capita (GDPPC) of Suzhou, China as an indicator of economic development as it depicts the entire developmental ecosystem that indicates the level of production activities and total energy consumption. Bearing this in mind, the authors postulate that economic development directly increases carbon emissions through industrial and domestic consumptions. For this purpose, linear and non-linear approaches to cointegration are applied. The study finds the existence of an inverted U-shape relationship between economic development and carbon emission in the long run. Trade openness and industrial share are positively contributing to increasing carbon emissions. Energy use shows a positive sign but an insignificant association with carbon emissions. The study concludes that carbon emissions in S... [more]

As a result of conducted air quality policy, including recent legal regulations (the local anti-smog resolution), the number of individual solid fuel heating devices in Cracow (Poland) gradually decreased. Reports on air quality in the city indicate that the concentration of pollutants in Cracow’s air shows a downward trend. However, a similar tendency in terms of improving air quality is also observed in the entire voivodeship, where, as a result of analogous although less radical measures, the number of individual solid fuel heating devices is also decreasing. The paper discusses the impact of legal regulations in Cracow on the improvement of air quality in the context of changes taking place in nearby cities. Trends in changes in PM10 and BaP (PM10) concentrations are analyzed. The rate of decline of the analyzed pollutants concentrations is estimated with the use of nonparametric linear regression. Analysis showed that the rate of decline in the average annual concentrations of PM1... [more]

Fossil fuels are being depleted, resulting in increasing environmental pollution due to greenhouse gases and, consequently, emerging detrimental environmental problems. Therefore, renewable energy is becoming more important; hence, significant research is in progress to increase efficient uses of solar energy. In this paper, the thermal performance of a conical concentrating system with different heat transfer fluids at varied flow rates was studied. The conical-shaped concentrator reflects the incoming solar radiation onto the absorber surface, which is located at the focal axis, where the collected heat is transported through heating mediums or heat transfer fluids. Distilled water and nanofluids (Al2O3, CuO) were used in this study as the heat transfer fluids and were circulated through the absorber and the heat storage tank in a closed loop by a pump to absorb the solar radiation. The efficiency of the conical concentrating system was measured during solar noon hours under a clear... [more]

Offshore wind energy has been identified as one of the most promising and increasingly attractive sources of energy. This technology offers a long-term power-generation source, less environmental impact, and fewer physical restrictions. However, given the complexity of this technology, economic feasibility studies are essential. Thus, this study aims to identify the main trends and criteria or the methods used in the economic feasibility studies of offshore wind energy, providing a review of the state of the art in this literature. For this, a Systematic Literature Review was carried out. The article shows the growing interest in offshore wind power generation and highlights how recently the interest in the studies that assess the technical−economic feasibility of this source has grown; it presents the main milestones of the topic. Based on a structured literature review, this article identifies the main trends in this topic: (i) wind farms, (ii) risk, (iii) floating offshore wind farm... [more]

When tubing is in a high-temperature and high-pressure environment, it will be affected by the impact of non-constant fluid and other dynamic loads, which will easily cause the tubing to vibrate or even resonate, affecting the integrity of the wellbore and safe production. In the structural modal analysis of the tubing, the coupling effect of the fluid and the tubing needs to be considered at the same time. In this paper, a single tubing is taken as an example to simulate and analyze the modal changes of the tubing under dry mode and wet mode respectively, and the effects of fluid solid coupling effect, inlet pressure, and ambient temperature on the modal of the tubing are discussed. After considering the fluid−structure interaction effect, the natural frequency of tubing decreases, but the displacement is slightly larger. The greater the pressure in the tubing, the greater the equivalent stress on the tubing body, so the natural frequency is lower. Furthermore, after considering the f... [more]

The energy transition is now treated in most countries as a necessary condition for their long-term development. The process of energy transformation assumes the simultaneous implementation of the Sustainable Development Goals, which are a major challenge for modern economies and introduce significant restrictions in their functioning. Our study aims to group EU member states according to their ability to achieve energy transition over time. The novelty of our approach is the assessment of energy transformation in the European Union through two aspects. The first one, “smart and efficient energy systems”, assess the current, widely understood energy consumption in economy, and the second one, “macroeconomic heterogeneity”, refers to the economic potential of a country. In our analysis, we included indicators from the 7th, 8th, 10th, 11th, and 12th Sustainable Development Goals. Using taxonomic methods, we created clusters of countries according to the emissivity of their economies and... [more]

The present investigation project aims to evaluate the extraction of contaminant material from two settling ponds to be used as alternative fuel in two cement plants. The extraction is carried out through mechanical means, and after that extraction, two options are compared: energy recovery and incineration. Through energy recovery, a potentially contaminated area is decontaminated and its waste is used; its high calorific value makes this option a viable one. The waste extraction is carried out through mechanical means due to the high density and viscosity of the waste. Because of these characteristics, the waste undergoes an on-site security adaptation to stabilize it, reduce declivity risk and make it suitable to be handled and moved. The second treatment is carried out in external installations where the final product is obtained (alternative fuel), which is to be used at industrial kilns. The entire described process shows a difference on the consumed energy of 6060.42 kWh/twaste... [more]

The harsh operating environment aggravates the degradation of pumped storage units (PSUs). Degradation trend prediction (DTP) provides important support for the condition-based maintenance of PSUs. However, the complexity of the performance degradation index (PDI) sequence poses a severe challenge of the reliability of DTP. Additionally, the accuracy of healthy model is often ignored, resulting in an unconvincing PDI. To solve these problems, a combined DTP model that integrates the maximal information coefficient (MIC), light gradient boosting machine (LGBM), variational mode decomposition (VMD) and gated recurrent unit (GRU) is proposed. Firstly, MIC-LGBM is utilized to generate a high-precision healthy model. MIC is applied to select the working parameters with the most relevance, then the LGBM is utilized to construct the healthy model. Afterwards, a performance degradation index (PDI) is generated based on the LGBM healthy model and monitoring data. Finally, the VMD-GRU prediction... [more]

Fibre optic cables are widely used as communication cables in Instrumentation and Control (I&C) systems. In the case of nuclear power plants (NPPs), using optic cables in mild environments outside of containment areas are very common. However, at present, there is a need for fibre optic cables to be used in containment areas, i.e., with radiation. An optical fibre consists of a highly transparent core that possesses a higher refractive index than the surrounding transparent cladding, which possesses a lower refractive index. Most optical fibres are manufactured from glass (silica with required dopants) which is created at high temperatures from the reaction between gasses. The glass used in optical fibres is sensitive; it becomes dark during exposure to radiation, which compromises the optic functions. That is why there has been a slow infiltration of optic cable in NPP containment areas. Radiation resistant optic fibres have been developed. Although these fibres are called “radiation... [more]

The main objective of the article is to evaluate the investment activity of large cities in Poland in the area of developing a low-carbon economy in 2014−2020, co-financed by European Union funds. This article poses several research questions, namely: Do large cities with environmental problems actively obtain EU funding to develop a low-carbon economy? What are the main socio-economic and environmental determinants of the level of the EU funding absorption among large cities in the research area? The empirical research was conducted on the basis of the data from the Ministry of Investment and Economic Development in Poland, which is responsible for the implementation of cohesion policy funds and from the Local Data Bank of Statistics Poland. Under the 2014−2020 perspective, 223 such projects have been implemented for a total of PLN 21 billion (EUR 4.74 billion). The projects focused on: transportation, electricity, gaseous fuels, steam, hot water and air for air conditioning systems,... [more]

Diesel generators (DGs) are set to work as a backup during power outages or support the load in remote areas not connected to the national grid. These DGs are working at a constant speed to produce reliable AC power, while electrical energy demand fluctuates according to instantaneous needs. High electric loads occur only for a few hours a day in remote areas, resulting in oversizing DGs. During a low load operation, DGs face poor fuel efficiency and condensation of fuel residues on the walls of engine cylinders that increase friction and premature wear. One solution to increase combustion efficiency at low electric loads is to reduce diesel engine (DE) speed to its ideal regime according to the mechanical torque required by the electrical generator. Therefore, Variable Speed Diesel Generators (VSDGs) allow the operation of the diesel engine at an optimal speed according to the electrical load but require additional electrical equipment and control to maintain the power output to elect... [more]

Developing biomass energy, seen as the most important renewable energy, is becoming a prospective solution in attempting to deal with the world’s sustainability-related challenges, such as climate change, energy crisis, and carbon emission reduction. As one of the most promising second-generation energy crops, giant silvergrass (Miscanthus × giganteus) is highly valued for its high potential for biomass production and low maintenance requirements. Mapping the potential global distribution of marginal land suitable for giant silvergrass is an essential prerequisite for the development of giant silvergrass-based biomass energy. In this study, a boosting regression tree was used to identify the marginal land resources for giant silvergrass cultivation using influencing factors, which include climate conditions, soil conditions, topography conditions, and land use. The results indicate that there are 3068.25 million hectares of land resources worldwide suitable for giant silvergrass cultiv... [more]

The current climatic scenario requires the use of innovative solutions to increase the production of electricity from renewable energy sources. Multilevel Power Inverters are a promising solution to improve the penetration of renewable energy sources into the electrical grid. Moreover, the performance of MPIs is a function of the modulation strategy employed and of its features (modulation index and switching frequency). This paper presents an extended and experimental analysis of three-phase five-level Cascaded H-Bridges Multilevel Inverter performance in terms of efficiency and harmonic content considering several MC PWM modulation strategies. In detail, the CHBMI performance is analyzed by varying the modulation index and the switching frequency. For control purposes, the NI System On Module sbRIO-9651 control board, a dedicated FPGA-based control board for power electronics and drive applications programmable in the LabVIEW environment, is used. The paper describes the modulation s... [more]

The article applies a three-stage Slacks-Based Measure-Data Envelopment Analysis (SBM-DEA) pattern to examine the relationship between energy consumption and unfavorable CO2 emissions on green sustainable development, for the 11 cities of the Guangdong-Hong Kong-Macao Greater Bay Area (GBA) during 2010−2016, by going through various violated factors and stochastic disturbance. Labor, capital and energy resource are chosen as input variables, while GDP and CO2 emission as output variables. During the three phases consisting of the SBM-DEA model (first stage and third stage) and SFA analysis (second stage), CO2 emission is considered as an unfavorable outcome, while stochastic statistical disturbances and external environmental influences are identified. The results show that the average efficiency of the GBA cities is 0.708, with only Shenzhen, Macao SAR and Hong Kong SAR having an efficiency of 1 during the whole study period. Based on the findings, suggestions are made for the GBA cit... [more]

Smart building issues are critical for current energy and comfort managing aspects in built environments. Nevertheless, the diffusion of smart monitoring solutions via user-friendly graphical interfaces is still an ongoing issue subject to the need to diffuse a smart building culture and a low-cost series of solutions. This paper proposes a new low-cost IoT sensor network, exploiting Raspberry Pi and Arduino platforms, for collecting real-time data and evaluating specific thermal comfort indicators (PMV and PPD). The overall architecture was accordingly designed, including the hardware setup, the back-end and the Android user interface. Eventually, three distinct prototyping platforms were deployed for initial testing of the general system, and we analysed the obtained results for different building typologies and seasonal periods, based on collected data and users’ preferences. This work is part of a large educational and citizen science activity.

Fly ash is the main by-product of coal combustion characterized by a large specific surface area. In addition to oxides, it also contains unburned coal and trace elements. This study aimed to investigate the possibility of using fly ash from pit-coal combustion (CFA) for the treatment of benzene-contaminated soil (S). The CFA was used as a mixture with Portland cement (PC) (70% PC + 30% CFA). The soil was treated with a PC-CFA mixture in amounts of 40, 60, and 80% of soil mass. During the process, the concentration of benzene was monitored with the flame-ionization detector. Produced monoliths (S+(PC-CFA)x) were tested for compressive strength and capillary water absorption. The experiment confirmed that the PC-CFA mixture limited benzene emission. The highest reduction in benzene concentration (34−39%) was observed for samples treated with the PC-CFA mixture in an amount of 80% (S+(PC-CFA)80). The average compressive strength of monoliths S+(PC-CFA)40, S+(PC-CFA)60, and S+(PC-CFA)80 w... [more]

Currently, in conditions of Industry 4.0, the use of cyber-physical systems in various fields is becoming widespread. This article is devoted to the problem of estimating CPS sustainability in the context of modern challenges faced by decision makers and IT developers in order to ensure effective proactive business process management using this innovative technology. The purpose of the research is to propose and substantiate a methodology for estimating CPS sustainability to ensure the reliability and strength of its elements, their interrelationships and interaction, as well as the effective functioning and development of this system in conditions of high dynamism and uncertainty of the external environment. In this study, we used methods of integral evaluation, synthesis, expert assessments, dynamic analysis, and systematic approach, and coined the term ‘CPS sustainability’. Our study showed that negative risks, external and internal threats may have a significant adverse impact on C... [more]

This study examines the concentrations of air pollution in the vicinity of a combined heat and power plant (CHP) and a communication route, using computer modeling of pollutant dispersion and spatial analysis based on real measurements in the city of Łódź, Poland, Europe. The research takes into account the concentrations of particulate matter (PM10, PM2.5, PM1.0) and gaseous pollutants (SO2 and VOC) in winter and summer. The spatial distribution of pollutants is discussed, including the presence of areas with increased accumulations of pollutants. Because atmospheric air has no natural boundaries, when analyzing any location, not only local sources of pollution, but also background pollution, should be analyzed. A clear difference was observed between the concentrations of pollutants in the summer and winter seasons, with significantly higher concentrations in the winter (heating) period. The impacts of road transport, individual heating systems, and combined heat and power plants wer... [more]

Taking a plateau high-pressure common-rail diesel engine as the research model, a model was established and simulated by AVL FIRE according to the structural parameters of a diesel engine. The combustion and emission characteristics of D, B20, and B50 diesel engines were simulated in the plateau atmospheric environment at 0 m, 1000 m, and 2000 m. The calculation results show that as the altitude increased, the peak in-cylinder pressure and the cumulative heat release of diesel decreased with different blending ratios. When the altitude increased by 1000 m, the cumulative heat release was reduced by about 5%. Furthermore, the emission trend of NO, soot, and CO was to first increase and then decrease. As the altitude increased, the mass fraction of NO emission decreased. As the altitude increased, the mass fractions of soot and CO increased. Additionally, when the altitude was 0 m and 1000 m, the maximum temperature, the mass fraction of OH, and the fuel−air ratio of B20 were higher and... [more]

Reservoir formation waters typically contain scaling ions which can precipitate and form mineral deposits. Such mineral deposition can be accelerated electrochemically, whereby the application of potential between two electrodes results in oxygen reduction and water electrolysis. Both processes change the local pH near the electrodes and affect the surface deposition of pH-sensitive minerals. In the context of the plugging and abandonment of wells, electrochemically enhanced deposition could offer a cost-effective alternative to the established methods that rely on setting cement plugs. In this paper, we tested the scale electro-deposition ability of six different formation waters from selected reservoirs along the Norwegian continental shelf using two experimental setups, one containing CO2 and one without CO2. As the electrochemical deposition of scaling minerals relies on local pH changes near the cathode, geochemical modelling was performed to predict oversaturation with respect to... [more]

Since the publication of the first comprehensive Probabilistic Safety Assessment (PSA) study—known as WASH-1400—in the US, PSA has developed into an effective and systematic method of identifying hazards, and evaluating and prioritizing the risks in nuclear facilities [...]

Ammonia combustion is a promising energy source as a carbon free fuel without greenhouse gas emissions. However, since the auto-ignition temperature is 651 degrees Celsius and the range of flammability limit is not wide compared to other fuels, fundamental studies on ammonia fires have rarely been conducted so far. Therefore, this study aims to numerically estimate fire spread characteristics when ammonia fuel in a high-pressure state leaks to the outside, especially focusing on the flammability limit according to oxygen concentration. Three kinds of reaction mechanism for numerical analysis were adopted to compare the flame structure, flammability limit, and combustion characteristics. Plank-mean absorption coefficients of nitrogen species were taken for the radiation model, in addition to the optically thin model. The effect of radiation heat loss could be identified from the maximum flame temperature trend at a low strain rate. It was confirmed that the pyrolysis of ammonia in the p... [more]

A synthetic review of the application of multi-objective optimization models to the design of climate-responsive buildings and neighbourhoods is carried out. The review focused on the software utilized during both simulation and optimization stages, as well as on the objective functions and the design variables. The hereby work aims at identifying knowledge gaps and future trends in the research field of automation in the design of buildings. Around 140 scientific journal articles, published between 2014 and 2021, were selected from Scopus and Web of Science databases. A three-step selection process was applied to refine the search terms and to discard works investigating mechanical, structural, and seismic topics. Meta-analysis of the results highlighted that multi-objective optimization models are widely exploited for (i) enhancing building’s energy efficiency, (ii) improving thermal and (iii) visual comfort, minimizing (iv) life-cycle costs, and (v) emissions. Reviewed workflows dem... [more]

Willows are one of the plants which can be used to produce biomass for energy purposes. Biomass production is classified as a renewable energy source. Increasing the share of renewable sources is one of the priority actions for European Union countries due to the need to reduce greenhouse gas emissions. To achieve the best possible growth of the willow and increase its biomass for fuel, it is crucial to provide optimal water conditions for its growth. The aim of the study was to determine the water requirements of willows under the conditions of the western Polish climate and to verify whether this area is potentially favourable for willow cultivation. The novelty of this paper lies in its multi-year climatic analysis in the context of willow water needs for the area of three voivodships: Lubusz, Lower Silesian, and West Pomeranian. This is one of the few willow water-needs analyses for this region which considers the potential for widespread willow cultivation and biomass production i... [more]