Conventional hydropower technologies such as dams have been criticized due to their negative environmental effects which have necessitated the development of new technologies for sustainable development of hydropower energy. Hydrokinetic (HK) energy is one such emerging renewable energy technology and, in this study, a theoretical potential assessment was done using a Geographic Information System (GIS) and Soil and Water Assessment Tool (SWAT) hydrological model, for the U-Tapao river basin (URB), a major tributary of the Songkhla lake basin (SLB) in southern Thailand. The SWAT was calibrated and validated with SWAT calibration and uncertainty (SWAT-CUP)-SUFI 2 programs using the observed discharge data from the gauging stations within the watershed. The model performance was evaluated based on the Nash−Sutcliffe efficiency (NSE) and the coefficient of determination (R2) values, achieving 0.62 and 0.60, respectively, for calibration, and 0.65 and 0.68 for validation which is considere... [more]

Cold supply chains (CSCs) are responsible for preserving the quality of perishable goods in storage and transport. They consume significant amounts of energy to maintain cooling temperatures constant over time continuously and ubiquitously, which is affected by the surrounding environment and the users’ behavior. The storage filling level is one specific feature of refrigerated warehouses observed in practice: they are more energy efficient when kept full of items, reducing the space that air occupies. Inventory management models that consider energy consumption have received increasing attention recently due to an increase in stakeholders’ awareness of sustainability. Despite this interest, there is no work that jointly considers the effects of the filling level and the temperature inside the warehouse. This study, therefore, integrates those aspects into the economic order quantity model and finds the optimal lot size quantity that minimizes the total system cost, which is the perfor... [more]

Over the past decades, clean and renewable energy has become a subject of great interest to both science and industry in response to the pollution caused by conventional energy sources. Its useful form should always meet the requirements of high performance and low environmental impact, while remaining within the scope of the expected functionality. The purpose of study presented in this paper was to determine the operational characteristics for a recently developed photovoltaic (PV)-powered thermoelectric (TE) cooling system with heat recovery. The characteristics of operation of the tested system were determined within the use of a specially developed measurement system. The conducted experimental research allowed describing the conditions of power supply for TE module using PV system, calculate the coefficient of performance (COP) for the whole TE cooling system with heat recovery and calculate the environmental impact indicators based on the material and energy balance used for lif... [more]

Occupants of tertiary environments rarely care about their energy consumption. This fact is even more accentuated in cases of buildings of public use. Such unawareness has been identified by many scholars as one of the main untapped opportunities with high energy saving potential in terms of cost-effectiveness. Towards that direction, there have been numerous studies exploring energy-related behaviour and the impact that our daily actions have on energy efficiency, demand response and flexibility of power systems. Nevertheless, there are still certain aspects that remain controversial and unidentified, especially in terms of socio-economic characteristics of the occupants with regards to bespoke tailored motivational and awareness-based campaigns. The presented work introduces a two-step survey, publicly available through Zenodo repository that covers social, economic, behavioural and demographic factors. The survey analysis aims to fully depict the drivers that affect occupant energy-... [more]

To present great environmental pressure from energy consumption during textile production, this paper calculates the energy footprint (EFP) of Shaoxing’s textile industry, from 2005 to 2018. Moreover, this study analyzes the relationship between Shaoxing’s textile industry energy consumption and economic development by using decoupling theory. Furthermore, the Logarithmic Mean Divisia Index decomposition method was employed to investigate the main factors that affect the EFP of Shaoxing’s textile industry. Research results show the following: (1) The growth rate of the total output value of Shaoxing’s textile industry was greater than the growth rate of the EFP, from 2005 to 2007. Thus, the decoupling state showed a weak decoupling, and EFP intensity decreased. (2) The EFP and economic growth were mainly based on the strong decoupling of Shaoxing’s textile industry from 2008 to 2015 (except for 2011), and EFP intensity declined further. (3) Economic recession in the textile industry wa... [more]

The electrical sector in the Caribbean region of Colombia is currently facing problems that affect its reliability. Many thermo-electric plants are required to fill the gap and ensure energy supply. This paper thus proposes a hybrid renewable energy generation plant that could supply a percentage of the total energy demand and reduce the environmental impact of conventional energy generation. The hybrid plant works with a photovoltaic (PV) system and wind turbine systems, connected in parallel with the grid to supply a renewable fraction of the total energy demand. The investigation was conducted in three steps: the first stage determined locations where the energy system was able to take advantage of renewable sources, the second identified a location that could work more efficiently from an economic perspective, and finally, the third step estimated the number of PV solar panels and wind turbines required to guarantee optimal functioning for this location using, as a main method of c... [more]

Interoperability testing is widely recognized as a key to achieve seamless interoperability of smart grid applications, given the complex nature of modern power systems. In this work, the interoperability testing methodology proposed by the European Commission Joint Research Centre is applied to a specific use case in the context of smart grids. The selected use case examines a flexibility activation mechanism in a power grid system and includes DSO SCADA, Remote Terminal Unit and flexibility source, interacting to support a voltage regulation service. The adopted test bed consists of a real-time power grid simulator, a communication network emulator and use case actors’ models in a hardware-in-the-loop setup. The breakdown of the interoperability testing problem is accomplished by mapping the use case to the SGAM layers, specifying the Basic Application Profiles together with the Basic Application Interoperability Profiles (BAIOPs) and defining the design of experiments to carry out d... [more]

A comparative evaluation of energy requirement and CO2 emission was performed for native polyculture microalgae oil production in a wastewater treatment plant (WWTP). The wastewater provided nutrients for algae growth. Datasets of microalgae oil production and their details were collected from the Minamisoma pilot plant. Environmental impact estimation from direct energy and material balance was analyzed using SimaPro® v8.0.4. in two scenarios: existing and algal scenarios. In the existing scenario, CO2 emission sources were from wastewater treatment, sludge treatment, and import of crude oil. In the algal scenario, CO2 emission with microalgae production was considered using wastewater treatment, CO2 absorption from growing algae, and hydrothermal liquefaction (HTL) for extraction, along with the exclusion of exhausted CO2 emission for growing algae and use of discharged heat for HTL. In these two scenarios, 1 m3 of wastewater was treated, and 2.17 MJ higher heating value (HHV) output... [more]

The high environmental impact of conventional methods of cooling and heating increased the need for renewable energy deployment for covering thermal loads. Toward that direction, the proposed system aims at offering an efficient solar powered alternative, coupling a zeolite−water adsorption chiller with a conventional vapor compression cycle. The system is designed to operate under intermittent heat supply of low-temperature solar thermal energy (<90 °C) provided by evacuated tube collectors. A prototype was developed and tested in cooling mode operation. The results from the testing of separate components showed that the adsorption chiller was operating efficiently, achieving a maximum coefficient of performance (COP) of 0.65. With respect to the combined performance of the system, evaluated on a typical week of summer in Athens, the maximum reported COP was approximately 0.575, mainly due to the lower driving temperatures with a range of 75 °C. The corresponding mean energy effici... [more]

Infrared detectors on satellites and spacecraft require cooling to increase their measurement sensitivity. To efficiently cool infrared detectors in a zero gravity environment and in limited spaces, a cryogenic loop heat pipe (CLHP) can be used to transfer heat over a certain distance by the capillary forces generated from porous wicks without a mechanical power source. The CLHP presented in this study transfers the heat load to a condenser 0.5 m away from an evaporator at temperatures below −150 °C. The CLHP with two evaporators includes a subloop for initial start-up, and uses a pressure reduction reservoir (PRR) for the supercritical start-up from room to cryogenic temperature. Nitrogen is used as the working fluid to verify the thermal behavior of the CLHP, and the heat-transfer capacity according to the nitrogen charging pressure of the PRR is investigated. To simulate a cryogenic environment, the CLHP is installed inside a space environment simulator, including a single-stage GM... [more]

The Life Cycle Assessment (LCA) methodology is often used to check the environmental suitability of hydrogen energy systems, usually involving comparative studies. However, these comparative studies are typically affected by inconsistent methodological choices between the case studies under comparison. In this regard, protocols for the harmonisation of methodological choices in LCA of hydrogen are available. The step-by-step application of these protocols to a large number of case studies has already resulted in libraries of harmonised carbon, energy, and acidification footprints of hydrogen. In order to foster the applicability of these harmonisation protocols, a web-based software for the calculation of harmonised life-cycle indicators of hydrogen has recently been developed. This work addresses—for the first time—the validation of such a tool by checking the deviation between the available libraries of harmonised carbon, energy, and acidification footprints of hydrogen and the corre... [more]

Sales of air conditioning are growing rapidly in buildings, more than tripling between 1990 and 2016. This energy use for air conditioning comes from a combination of rising temperatures, rising population and economic growth. Energy demand for climate control will triple by 2050, consuming more energy than that currently consumed altogether by the United States, the European Union and Japan. This increase in energy will directly impact water consumption, either to directly cool a condenser of an equipment or to serve indirectly as a basis for energy sources such as hydroelectric power that feed these heating, ventilation and air conditioning (HVAC) systems. Knowing the unique and growing importance of water, a new index, Total Water Impact (TWI) is presented, which allows a holistic comparison of the impact of water use on water, air and evaporative condensation climate systems. 200 and 500 TON (tons of refrigeration) air-cooled and water-cooled systems are theoretically compared to e... [more]

In this study, an experiment is conducted to explore the potential to protect both the environment and resource shortage of soybean straw, for combustion in a tubular furnace. Then, the combustion characteristics, gas emissions, and energy consumption of soybean straw are analyzed at a combustion temperature range of 773−1173 K. The results show that the total emissions of CO and NOX are the largest at a temperature of 873 K. For NOX, the emission time is significantly improved at temperatures of 973−1173 K. At high temperatures, the reaction of NOX with CO and coke reduces the total emission of NOX. The average weight loss rate at combustion temperatures of 973, 1073, and 1173 K increased by 27.38%, 61.47% and 77.97%, respectively, relative to that of 873 K. However, the energy consumption increases with the increase in combustion temperature, resulting in unnecessary waste. To get an optimal characteristic between energy utilization and pollutant discharge, a temperature range of 873... [more]

Ground-level ozone in cities is increasing mainly due to traffic exhaust aftertreatment devices, i.e., tailpipe catalytic converters. The chemical reaction of O3 formation indicates radiation and nitrogen oxides as main players. Thus, we investigate correlations between O3, global radiation, nitrogen oxides, temperature, and precipitation in several periods of the year (2017) near a traffic roundabout in Lisbon city (coordinates 38°44’55’’ lat, −9°08’56’’ long). The weekend effect, school break versus school period, day and night, and seasonal effect were explored. Low-cost sensors (LCS) of O3, NOx, and temperature were tested to see if they can be used to get historical data on other cities and locations. The main innovation is the calibration of the sensor directly with real data (uncontrolled environment). Raw data were compared and led us to conclude that MQ-131 has a better performance than the MICS-4514 sensor. The results indicate that the diurnal cycle of ozone concentration ha... [more]

The Directive 2010/31/EU on the energy performance of buildings has introduced the standard of “nearly zero-energy buildings” (NZEBs). European requirements place the obligation to reduce energy consumption on all European Union Member States, particularly in sectors with significant energy consumption indicators. Construction is one such sector, as it is responsible for around 40% of overall energy consumption. Apart from a building’s mass and its material and installation solutions, its energy consumption is also affected by its placement relative to other buildings. A proper urban layout can also lead to a reduction in project development and occupancy costs. The goal of this article is to present a method of optimising single-family house complexes that takes elements such as direct construction costs, construction site organisation, urban layout and occupancy costs into consideration in the context of sustainability. Its authors have analysed different proposals of the placement o... [more]

This paper presents a model combining the LCA (Life Cycle Assessment) of fossil fuel extraction with its quality parameters and related CO2, SO2 and dust emissions at the stage of the combustion process. The model which was developed aims to identify the environmental impact of the processes of electricity production from selected energy carriers over their whole life cycle. The model takes into account the full LCA of fossil fuel extraction (of both hard and brown coal), its enrichment and fuel production as well as the environmental impact associated with emissions introduced into the air at the stage of electricity generation based on the fuels evaluated. Such an approach allows one to determine the fuel quality parameters that affect the environmental impact of energy production based on an LCA of mining and assigns the degree of environmental impact involved in particular production processes. Overall, the results obtained based on the proposed model permit the identification and... [more]

This paper presents the results of research on the preparation and use for energy purposes of three reed herbaceous energy plants: reed (Phragmites australis) and bulrush (Typha); both grown in local vicinities on lakes and riverbanks and reed canary grass (Phalaris arundinacea L.). The physical-mechanical characteristics (density, moisture, and ash content) of chopped and milled reeds were investigated. The investigation of mill fractional compositions determined the largest amount of mill—reed mill, collected on the sieves of 0.63 mm (40.0%). The pellet moisture ranged from 10.79% to 6.32%, while the density was 1178.9 kg m−3 for dry matter (DM) of reed. The ash content of reed, bulrush and reed canary grass pellets was 3.17%, 5.88%, and 7.99%, respectively. The ash melting temperature ranged from 865 to 1411 °C; these temperatures were high enough for ash melting. The determined pellet calorific value varied from 17.4 to 17.9 MJ kg−1 DM. The disintegration force, indicating pellet s... [more]

This research presents the development of R463A refrigerant, a nonflammable refrigerant that was retrofitted to replace R404A. R463A is primarily composed of hydrofluorocarbons/hydrocarbons/carbon dioxide (HFCs/HCs/CO2), and has global-warming potential (GWP) of 1494. It is a nonazeotropic mixture of R32 (36%), R125 (30%), R134a (14%), R1234yf (14%), and R744 (6%). R463A is composed of polyol ester oil (POE), and it is classified as a Class A1 incombustible and nontoxic refrigerant. R463A has a higher cooling capacity (Qe) than that of R404A, as it is composed of hydrofluorocarbons (HFCs) R32 and carbon dioxide (CO2) R744, and has lower GWP than that of R404A due to the use of hydrofluoroolefins (HFOs) from R1234yf. The results of this research showed that R463A can be retrofitted to replace R404A due to its composition of POE, Class A1 incombustibility, and lower toxicity. The properties of R463A and R404A, as analyzed using national institute of standards and technology (NIST) refere... [more]

Due to the increasing energy crisis and environmental pollution, the development of drive motors for new energy vehicles (NEVs) has become the focus of popular attention. To improve the sine of the air-gap flux density and flux regulation capacity of drive motors, a new hybrid excitation synchronous motor (HESM) has been proposed. The HESM adopts a salient pole rotor with built-in dual-V permanent magnets (PMs), non-arc pole shoes and excitation windings. The fundamental topology, operating principle and analytical model for a magnetic field are presented. In the analytical model, the rotor magnetomotive force (MMF) is derived based on the minimum reluctance principle, and the permeance function considering a non-uniform air-gap is calculated using the magnetic equivalent circuit (MEC) method. Besides, the electromagnetic performance including the air-gap magnetic field and flux regulation capacity is analyzed by the finite element method (FEM). The simulation results of the air-gap ma... [more]

Shale oil exploration has been a key area of onshore oil and gas exploration in China in recent years. In this study, organic geochemistry and element geochemistry are united to study the shale oil and source rock in the Lucaogou formation of Jimusar sag, in order to reveal the paleoclimate, paleoenvironment, source of organic matter, and factors affecting organic matter accumulation and shale oil generation. The shale oil in the study area is mainly accumulated in two strata with good reservoir properties and oiliness, known as the upper sweet spot and lower sweet spot. Indexes of biomarkers and sensitive elements revealed the warm and semi-arid paleoclimate during Lucaogou formation, and the water column was brackish to salty. Water stratification caused a suboxic to anoxic environment in the deep-water column and coincided with the anoxic photic zone phenomenon. Compared with the lower sweet spot, the more humid climate, deeper and fresher water, and stronger water stratification ch... [more]

The authors studied the impact of indoor air humidity in the range of 60% to 90% on building user perception in the temperature range of 26 to 28 °C. The research thesis was put forward that the impact of humidity on indoor air quality dissatisfaction of building users in a warm and humid indoor environment is greater than that indicated in thermal comfort models. The presented experiment examined the indoor air quality perception of n = 28 subjects in the test chamber of a nearly zero energy building under ten environmental conditions, together with a thermal comfort assessment. The authors developed an experimental relation for predicting building users’ satisfaction based on the Weber−Fechner law, where the predicted percentage of dissatisfied users (PD) is determined by means of air enthalpy (h), PD = f(h). The obtained results confirmed the sated thesis. Additionally, the intersection points of the experimental function and isotherms resulting from the Fanger model are presented,... [more]

Street lighting plays a crucial role in a city’s night landscape and in urban traffic management, influencing users’ comfort and safety. To contain costs of public street lighting systems and to avoid energy waste, illuminance levels on road surfaces must be adequate to fit actual traffic volumes, as prescribed by regulations. This is true not only for motorized roads but also for sidewalks, paths, and pedestrian areas. Regulations in force establish a relationship between road traffic volumes and minimum illuminance levels through the lighting classes selection procedure. Lighting classes selection is based on various para meters among which traffic volume is the most difficult to evaluate because traffic volumes are generally estimated or measured by a traffic observation campaign. In this paper, an alternative method for classes association which is based on a space syntax approach, is described. The method was applied to the case study town of Pontedera (Italy) for the analysis of... [more]

The production of energy in wind power plants is regarded as ecologically clean because there being no direct emissions of harmful substances during the conversion of wind energy into electricity. The production and operation of wind power plant components make use of the significant potential of materials such as steel, plastics, concrete, oils, and greases. Energy is also used, which is a source of potential negative environmental impacts. Servicing a wind farm power plant during its operational years, which lasts most often 25 years, followed by its disassembly, involves energy expenditures as well as the recovery of post-construction material potential. There is little research in the world literature on models and methodologies addressing analyses of the environmental and energy aspects of wind turbine modernization, whether in reference to turbines within their respective lifecycles or to those which have already completed them. The paper presents an attempt to solve the problems... [more]

Developing a regional power system to achieve a high level of integration of national systems requires sufficient development of the regional transmission grid. This is possible only with appropriate schemes for the complete cost−benefit analyses, and cost allocation of these transmission investments, which plays a critical role in the selection of the most efficient network investment and the proper assignment of their cost to the national systems. Network reinforcements affect the operation of power systems and, therefore, the externalities of power generation. This paper examines the impacts of integrating local air pollution damage from power production within the benefit assessment and cost allocation of transmission investments. The paper describes the methodology followed and illustrates its application in a real-life case study where a simplified version of a European network is considered. Within this case study, we have assessed the impact of considering the reduction in air... [more]

In this paper, a novel combined radiation-convection floor heating system is shown. This study uses practice-based learning and investigated the thermal performance of a combined radiation-convection floor heating system with a water heat pump system by evaluating the thermal environment and energy consumption in an experimental test. A new method that analyzed the thermal performance of four different controls was developed and applied. The results of the surface temperature distributions demonstrated that Mode 1, which uses only convection, had the lowest floor temperature and was thus considered inappropriate for occupants who sleep on the floor. By contrast, Modes 2, 3, and 4 showed high floor surface temperatures as hot water was supplied to the radiant heating panel. The predicted mean vote (PMV) results suggest that radiant floor heating is not appropriate for intermittent heating. In other words, occupants of single residences who return home at night will experience a long per... [more]