This paper aims to simulate and evaluate the impacts of increases and decreases in oil price on industrial sectors in China. We develop an oil-economy computable general equilibrium (OE-CGE) model with crude oil as an important factor in production. The transmission mechanism of crude oil price swings to various industrial sectors is described in the model. We calibrate parameters in the model parameters using input-output data. In addition, we simulate the rise and fall of oil prices in the model and assess the impact of crude oil prices on various industrial sectors. The results show that crude oil price changes have the greatest impact on the output and consumption of crude oil and gas extraction products sector, crude oil refined coke products, and processed nuclear fuel products sector. The investment of public utilities sector is the most sensitive to changes in crude oil price. When the price of crude oil changes, its investment drops significantly. Crude oil price stability is... [more]

The prediction of charging point occupancy enables electric vehicle users to better plan their charging processes and thus promotes the acceptance of electromobility. The study uses Adaptive Charging Network data to investigate a public and a workplace site for predicting individual charging station occupancy as well as overall site occupancy. Predicting individual charging point occupancy is formulated as a classification problem, while predicting total occupancy is formulated as a regression problem. The effects of different feature sets on the predictions are investigated, as well as whether a model trained on data of all charging points per site performs better than one trained on the data of a specific charging point. Reviewed studies so far, however, have failed to compare these two approaches to benchmarks, to use more than one algorithm, or to consider more than one site. Therefore, the following supervised machine-learning algorithms were applied for both tasks: linear and log... [more]

We have proposed a fruitful design principle targeting a concentration ratio (CR) >1000× for a typical high concentrating photovoltaics (HCPV) system, on account of a two-concentrator system + homogenizer. The principle of a primary dual-lens concentrator unit, completely analogous basic optics seen in the superposition compound eyes, is a trend not hitherto reported for solar concentrators to our knowledge. Such a concentrator unit, consisting of two aspherical lenses, can be applied to minify the sunlight and reveal useful effects. We underline that, at this stage, the CR can be attained by two orders of magnitude simply by varying the radius ratio of such two lenses known from the optics side. The output beam is spatially minimized and nearly parallel, exactly as occurs in the superposition compound eye. In our scheme, thanks to such an array of dual-lens design, a sequence of equidistant focal points is formed. The secondary concentrator consists of a multi-reflective channel, whic... [more]

Perfluorosulfonic acid (PFSA) polymer is considered as a proton exchange membrane material with great potential. Nevertheless, excessive water absorption caused by abundant sulfonic acid groups makes PFSA have low dimensional stabilities. In order to improve the dimensional stability of PFSA membranes, nanofibers are introduced into PFSA membranes. However, because nanofibers lack proton conducting groups, it usually reduces the proton conductivities of PFSA membranes. It is a challenge to improve dimensional stabilities while maintaining high proton conductivities. Due to the structural designability, covalent organic frameworks (COFs) with proton conductive groups are chosen to improve the overall performance of PFSA membranes. Herein, COFs synthesized in situ on three-dimensional PAN nanofibers were introduced into PFSA to prepare PFSA@PAN/TpPa-SO3H sandwiched membranes. The PFSA@PAN/TpPa-SO3H-5 composite membrane exhibited outstanding proton conductivity, which reached 260.81 mS·cm... [more]

The state of health (SOH) is among the most important parameters to be monitored in lithium-ion batteries (LIB) because it is used to know the residual functionality in any condition of aging. The paper focuses on the application of the extended Kalman filter (EKF) for the identification of the parameters of a cell model, which are required for the correct estimation of the SOH of the cell. This article proposes a methodology for tuning the covariance matrices of the EKF by using an optimization process based on genetic algorithms (GA). GAs are able to solve the minimization problems for the non-linear functions, and they are better than other optimization algorithms such as gradient descent to avoid the local minimum. To validate the proposed method, the cell parameters obtained from the EKF are compared with a reference model, in which the parameters have been determined with proven procedures. This comparison is carried out with different cells and in the whole range of the cell’s S... [more]

This Editorial summarizes the papers of the Special Issue entitled ‘Advanced Control Techniques for Wind/Solar/Battery Systems’ published in Energies. The Special Issue includes four scientific articles published in 2021 and 2022 in the field of quasi-Z-Source inverter control, photovoltaic energy conversion, battery charge control, wind turbine speed control, and solar irradiance prediction. New scientific achievements with experimental verifications of the achieved results are presented in all articles.

One of the conditions behind the development of any company is its capability of meeting the constantly changing challenges posed by the surrounding environment. Photovoltaics in Poland has been a boom industry in recent years. On 1 April 2022, new changes in photovoltaics came into force. A very short transition time will bring about serious problems to companies dealing in the photovoltaics branch since it has had an exceptionally short time to sufficiently prepare for the changes. The article presents results of a questionnaire-based survey conducted among 394 companies dealing in fitting photovoltaic installations in Poland. The subjects were selected for participation according to the purposive sample principle. The aim of the article was to present and analyze the entrepreneurs’ opinions concerning prospects for development in the nearest year to come. The alterations to the system of support of prosumers, which entered into force on 1 April 2022, will limit the interest in photo... [more]

Lean burn spark ignition (SI) engines represent an effective solution for improving fuel economy and reducing exhaust emissions and can be implemented both in conventional and hybrid powertrains. On the other hand, lean operation increases cyclic variability with negative impact on power output, engine efficiency, roughness, and operating stability. Although this phenomenon has been widely investigated, the effects of flow field on the inception and development of flames in direct injection spark ignition (DISI) engines under lean burn conditions is not yet completely understood. In particular, the effect of spark plug geometry and electrode orientation with respect to tumble motion has been minimally investigated. For these reasons, two different spark-plug geometries (i.e., single- and double-ground electrode) and three different orientations (i.e., cross-, counter-, and uni-flow with respect to the direction of tumble motion) were investigated in an optically accessible DISI engine... [more]

A fixed effects regression and two-step system generalized method of moments (GMM) is used to analyze secondary data from the World Bank, covering 163 countries over the period from 2000 to 2016. The study tests the relationship between renewable energy, urbanization, and CO2 emissions. The empirical results show that urbanization has an inverted U-shaped relationship with CO2 emissions, while renewable energy consumption mitigates CO2 emissions. If causal, a 1% increase in renewable energy use leads to a 1.2% decrease in CO2 emissions. The results also show that the GDP per capita has an inverted U-shaped relationship with CO2 emissions, confirming the environmental Kuznets curve (EKC). We also found that innovation, proxied by residents’ patents, has a non-linear effect on CO2 emissions. As a policy implication, developing countries should increase the share of renewable energy in their total energy use, and promote innovative activities by increasing government spending on R&D.

This work highlights the performance metrics and the fundamental degradation mechanisms of lead-acid battery technology and maps these mechanisms to generic duty cycles for peak shaving and frequency regulation grid services. Four valve regulated lead acid batteries have been tested for two peak shaving cycles at different discharge rates and two frequency regulation duty cycles at different SOC ranges. Reference performance and pulse resistance tests are done periodically to evaluate battery degradation over time. The results of the studies are expected to provide a valuable understanding of lead acid battery technology suitability for grid energy storage applications.

Grid-compliant integration of renewable energies will in future require considerable increases in flexibility in the operation of conventional power plants. The integration of thermal energy storage systems (TES) into the power plant process can create considerable improvements, for example, in the speed of load change and partial load behavior. In the case of existing plants, there are thus good prospects of upgrading for more flexible operation, which promises improvements in the energy system that can be achieved in the relatively short term. The aim of this publication is, therefore, to identify integration options for TES in coal-fired power plants which would enable the desired high flexibility potentials and, at the same time, include cost-efficient solutions. By means of an iterative approach between future scenarios of the energy market, the power plant process, and the TES component, favored configurations were developed from a wide range of integration concepts. For this pur... [more]

This contribution presents a novel methodology to evaluate the lifetime extension potential of wind turbines—taking towers as the key component that preserves onshore turbines’ structural integrity—as a consequence of the difference between design and site-specific loads. Specifically, attention is drawn to the site-specific wind direction distribution, which provides an additional source of lifetime extension potential. For this purpose, variants of closed-form solutions (based on the tower section’s normal stress) are developed to enable fatigue damage accumulation due to fore-aft and side-to-side bending moments at any point on the tower circumference without the need for further information on tower section geometry or material properties. Based on the degree of data availability, different scenarios are defined to estimate lifetime extension potential from the accurate tower’s normal stress and approximations using resultant bending moment, fore-aft bending moment, and finally, wi... [more]

Hydraulic vibration is a critical factor affecting the stability and health of the hydro-turbine generator unit (HGU). This paper investigates the nonlinear dynamic characteristics of the HGU occurring from the hydraulic vibration. First, using the turbulence flow model, the lift and drag coefficients of the asymmetric airfoil blades are calculated at different Reynolds numbers and angles of attack. Based on the lift and drag coefficients of the asymmetric airfoil blade, a novel nonlinear mathematical model of asymmetric hydraulic forces is proposed for the asymmetric airfoil blade. Then, combining mechanic and electric asymmetric excitations, a coupled nonlinear mathematical model of the HGU is built using Lagrange equations. Moreover, the correctness of this model is verified. Finally, dynamic behaviors of the HGU changing with attack angle, deviation of the outlet blade angle, outlet guide vane angle, and Reynolds number are analyzed by bifurcation diagrams. It is found that increas... [more]

The environmental context causes the use of renewable energy to increase, with the aim of finding alternatives to fossil-based products such as fuels. Biodiesel, an alternative to diesel, is now a well-developed solution, and its production from renewable resources makes it perfectly suitable in the environmental context. In addition, it is biodegradable, non-toxic and has low greenhouse gas emissions: reduced about 85% compared to diesel. However, the feedstock used to produce biodiesel competes with agriculture and the application of chemical reactions is not advantageous with a “green” process. Therefore, this review focuses only on bioprocesses currently taking an important place in the production of biodiesel and allow high yields, above 90%, and with very few produced impurities. In addition, the use of waste oils as feedstock, which now accounts for 10% of feedstocks used in the production of biodiesel, avoids competition with agriculture. To present a complete life-cycle of oil... [more]

This study investigated the effects of polyvinyl chloride (PVC) addition on low-rank coal’s pyrolysis characteristics, especially the products distribution and chlorine migration. Hailar lignite (HLE) with different industrial, pure, PVC-content additions were prepared (the mass percentage of PVC addition was from 5% to 25%), and the co-pyrolysis characteristics of HLE and PVC were performed on a fixed-bed reactor and thermogravimetric analyzer. The chars were characterized with X-ray diffraction (XRD), X-ray fluorescence (XRF), and Fourier-transform infrared (FT-IR) spectroscopy analysis. The gas and tar compositions were analyzed by using gas chromatography (GC) and a gas chromatography−mass spectrometry (GC−MS) system, respectively. The results indicate that the addition of PVC can increase the release amounts of CH4, C2H4, and C2H6, simultaneously reducing the release amount of CO2 and CO; the quality of pyrolysis tar was also improved, especially the alkane content in tar, which i... [more]

The requirement for clean energy has increased drastically over the years due to the emission of CO2 and the degrading of the environment by introducing Renewable Energy Systems (RES) into the existing power grid. While these systems are a positive change, they come at a cost, with some issues relating to the stability of the grid and feasibility. Hence, this research paper closely investigates the modeling and interlinking of photovoltaic (PV)-based solar power and Double-Fed Induction Generator (DFIG)-based wind turbines with the conventional power systems. RES has been known to contribute to a highly non-linear system and complexity. To return the power systems to their original state after a load disturbance, a novel control technique based on the fractional-order Type-2 Fuzzy logic system, well developed via particle swarm optimization (PSO), has been utilized for solving the frequency control problem of a renewable interlinked power system. The efficacy of the proposed technique... [more]

Recently, we demonstrated for Curaçao that renewable electricity generation from wind combined with energy storage in the form of ammonia is competitive with imported fossil fuels, such as LNG, oil, and coal. In the current work, we have expanded the model by considering imported green ammonia as an alternative to local electricity generation and storage. Local production of ammonia as an energy storage medium was compared with imported ammonia to make up the electricity produced from onshore wind, for Curaçao and Fiji’s largest island Viti Levu. Curaçao and Viti Levu have been selected as two interesting extremes with favorable and non-favorable wind conditions, respectively. Assuming a market price of 500 USD/t NH3, it is found that importing ammonia is the most feasible solution for both islands, with a levelized cost of electricity (LCOE) of 0.11 USD/kWh for Curaçao and 0.37 USD/kWh for Viti Levu. This compares to 0.12 USD/kWh for Curaçao; however, for Viti Levu, this value increas... [more]

This paper is devoted to solving the problem of how to comprehensively control coal seam gas and hydrogen sulfide in the mining face, distributed from the coal seam in abandoned oil wells in coal mining resource areas. The abandoned oil wells of Ma tan 30 and Ma tan 31 in the No. I0104105 working face of the Shuang Ma Coal Mine were taken as examples. Through parameter testing, gas composition analysis, field investigation at the source distribution, and the influence range of gas and hydrogen sulfide in coal seam in the affected range of the abandoned oil wells were studied. The results show that the coal-bearing strata in Shuang Ma coal field belong to the coal−oil coexistence strata, and the emission of H2S gas in the local area of the working face is mainly affected by closed and abandoned oil wells. Within the influence range of the abandoned oil wells, along the direction of the working face, the concentration of CH4 and H2S gas in the borehole increases as you move closer to the... [more]

Pollution and the increase in greenhouse gas (GHG) emissions have long been linked to the world’s increasing need for fossil fuels to generate energy. Every day, the energy consumption is increasing; therefore, it is important to improve technologies that use renewable energy sources. With the abundant availability of sustainable energy, solar power is becoming a necessity. However, solar energy has a low energy density and therefore requires a large installation area, which requires heat collection and heat storage technology. Much research is now being done on the conical solar systems to improve efficiency including calculating an optimal cone angle, finding the best flow ratio and the best absorber design, etc. Therefore, in this study, thermal performance of a conical solar collector (CSC) was assessed with a new design of concentric tube absorber (addition of a coil) and compared to the existing circular tube absorber. It was found that 6 L/min flow rate of heating medium (distil... [more]

Experimental investigations are conducted to determine the mechanism and characteristics of a jet in an L-shape crossflow simulating the radial swirl injector of a lean premixed-prevaporized (LPP) combustor. To simplify the radial flow of the actual injector while ignoring the centrifugal effect, the L-shaped 2D-channel is used for the crossflow, and water is used as a fuel simulant. The jet breakup is captured using a high-speed camera, and the density gradient magnitude is post-processed to clarify the spray. The Sauter mean diameter (SMD) of the spray is measured via a laser diffraction method with a helium−neon laser optical system (HELOS). The characteristics of the jet in the L-shape crossflow are compared with the characteristics of the jet in a typical crossflow through the flat channel. The results for different outlet heights of the L-shape channel (H/d0) and different injector positions (L/d0) are presented. A dimensionless number (τ) consisting of a time ratio is introduced... [more]

This paper presents the development of a global and integrated sizing approach under different performance indexes applied to fuel cell/battery hybrid power systems. The strong coupling between the hardware sizing process and the system supervision (energy management strategy EMS) makes it hard for the design to consider all the possibilities, and today’s methodologies are mostly experience-based approaches that are impervious to technological disruption. With a smart design approach, new technologies are easier to consider, and this approach facilitates the use of new technologies for transport applications with a decision help tool. An automotive application with a hybrid fuel cell (PEMFC)/battery (Li-Ion) is considered to develop this approach. The proposed approach is based on imbricated optimization loops and considers multiple criteria such as the fuel consumption, reliability, and volume of the architecture, in keeping with industry expectations to allow a good trade-off between... [more]

The dynamic ice load of conical offshore wind turbines (OWTs) in cold regions is unclear. The ice force period is the key parameter used to establish an ice force model for conical structures. To obtain ice load data, a field monitoring system was installed on an OWT in a cold region in China. Based on the monitoring data, a new formula for calculating the ice force period of conical structures was established. By comparing the period calculated with this formula and the measured ice force period, it was found that the calculated data generally agreed with the measured data. Then, a random dynamic ice force model for conical OWTs can be established. Based on this ice force model, the ice-induced vibration of an OWT was analyzed with the ANSYS finite element software. The results are in good agreement with the measured data obtained from the OWT in the time and frequency domains. Therefore, the random dynamic ice force model established in this paper can be used to evaluate the ice resi... [more]

The development of each country depends on electricity. In this regard, conventional energy sources, e.g., diesel, petrol, etc., are decaying. Consequently, the investigations of renewable energy sources (RES) are increasing as alternate energy sources for the fulfillment of energy requirements. The output characteristics of RES are becoming non-linear. Therefore, the maximum power point tracking (MPPT) techniques are critical for extracting the maximum power point (MPP) from RES, e.g., photovoltaic (PV) and wind turbines (WT). RES such as the Fuel Cell (FC) has been hailed as one of the major capable RES for automobile applications since they continually create electricity for the dc-link (even if one or both RES are not supplied by solar and wind, the FC will continue to supply to the load). Adaptive Neuro-Fuzzy Inference System (AN-FIS) MPPT for PV, WT, FC, and Hybrid RES is employed in this research article to solve this problem. The high step-ups (boost converters) are connected w... [more]

As the onshore wind farm technology matures, offshore wind energy has attracted increasing attention. Zhejiang has coastal areas with massive potential for wind resources because of its geographical location. Therefore, understanding the wind resources in these areas can lay a foundation for future development and utilization. On this basis, this study used the measured wind field data of a wind farm along the coast of Zhejiang from March 2014 to February 2015 and from March 2016 to February 2018 to investigate and compare the characteristics of wind energy resources, including average wind speed, Weibull shape and scale factors, wind direction variation, and wind energy density. Then, the capacity coefficient of a wind turbine predicted using the wind farm data was compared with the actual capacity coefficients of two wind turbines in the wind farm in 2019. Results revealed the following observations: The overall variations in the evaluation indicators followed clear patterns over the... [more]

Increasingly, the exploitation of buildings involves the need for comprehensive management of all systems operating within it, their continuous monitoring, both for the safety of users and to mainly optimize the operating parameters of systems that are largely dependent on each other, interact with each other. This is mainly associated with the need for the most energy-efficient management of energy consumption, which has the largest share of operating costs. The main cost for the facilities is the cooling aspect, which is significant, and for this reason, it is necessary to analyze the possibility of its minimization. One of the possible systems to consider in order to reduce the consumption of cooling energy in the facility is the application of free-cooling technology, which is based on the use of the natural cooling capacity of the outside air for cooling rooms with high heat gains. The application of the free cooling system for facilities with a relatively stable cooling load, wit... [more]