The purpose of this study is to determine the issues that financial institutions should pay attention to in their decision to provide financing to large scale energy projects. Within this framework, taking into account the Balanced Scorecard (BSC) approach, 4 dimensions and 8 criteria that can be effective in these decisions of financial institutions were determined. After that, the importance weights of these dimensions and criteria were determined by interval type-2 (IT2) fuzzy DEMATEL method. In addition, 3 different types of banks (public, private, foreign) are listed for their performance in financing energy projects. According to the results of the analysis, the technological and financial adequacy of the company that will invest in energy is the issue that financial institutions should pay the most attention to in their credit decision. Therefore, it is important for financial institutions to visit the customer's location and pay attention to the technological adequacy in the pr... [more]

Pyrolysis of anaerobically digested sludge can serve as an efficient biomass for biofuel production. Pyrolysis produces products like char, bio-oil, and combustible gases by thermochemical conversion process. It can be used for sludge treatment that decreases sludge disposal problems. Sludge produced from anaerobic co-digestion (microalgae, cow dung, and paper) waste has high carbon and hydrogen content. We investigated the candidacy of the anaerobic sludge having high heating value (HHV) of 20.53 MJ/kg as a reliable biomass for biofuels production. The process of pyrolysis was optimized with different temperatures (400, 500, and 600 °C) to produce high quantity and improved quality of the products, mainly bio-oil, char, and gas. The results revealed that with the increase in pyrolysis temperature the quantity of char decreased (81% to 55%), bio-oil increased (3% to 7%), and gas increased (2% to 5%). The HHV of char (19.2 MJ/kg), bio-oil (28.1 MJ/kg), and gas (18.1 MJ/kg) were predomin... [more]

The paper explores the impact of early stage and established entrepreneurs on industrial energy consumption across European countries for the period 2001−2017. It proposes that industrial energy consumption is a complex multifaceted result of value-added activities conducted by different types of entrepreneurs and the quality of macroeconomic and entrepreneurial framework conditions, which support or hinder entrepreneurial activity and consequently energy use. After selecting the most appropriate model using a panel Bayesian averaging model approach, a fixed effects panel regression analysis was conducted to investigate more deeply the impact of different types of entrepreneurs on industrial energy consumption. The results show that early stage and established entrepreneurs exhibit different behavioral patterns with respect to energy use. The former follows, although statistically insignificantly, a U-shaped energy use curve. By contrast, the latter follows statistically significantly... [more]

This paper investigates the influence of low-pressure glow plasma water treatment on boiling phenomenon. The presented results show the novel influence and potential new applications of low-pressure glow plasma treated water. Low-pressure glow plasma water treatment affects some of its physical properties such as surface tension, pH, and electric conductivity; this is due to changes in the water structure. An experimental analysis aimed to investigate the effect of such a treatment on the boiling heat transfer coefficient of water, and to assess the stability of GPTW. The experiments were carried out at atmospheric and reduced pressure for heat fluxes up to 70 kW/m2. The analysis shows significant deterioration of the boiling heat transfer coefficient under reduced pressure. In addition, the plasma treatment process had no significant effect on the thermal conductivity of water, as confirmed experimentally. A slight increase was observed, but it was within the measuring error range of... [more]

Virtual power plants (VPPs) have been widely researched to handle the unpredictability and variable nature of renewable energy sources. The distributed energy resources are aggregated to form into a virtual power plant and operate as a single generator from the perspective of a system operator. Power system operators often utilize the incentives to operate virtual power plants in desired ways. To maximize the revenue of virtual power plant operators, including its incentives, an optimal portfolio needs to be identified, because each renewable energy source has a different generation pattern. This study proposes a stochastic mixed-integer programming based distributed energy resource allocation method. The proposed method attempts to maximize the revenue of VPP operators considering market incentives. Furthermore, the uncertainty in the generation pattern of renewable energy sources is considered by the stochastic approach. Numerical results show the effectiveness of the proposed method... [more]

Renewable energy sources (RES) have significantly helped in meeting the electricity demand of Crete, with their share in the energy balance to account for about 25% of the annual electricity production for the past five years. The contribution of photovoltaics (PVs) has been especially significant for the past three years, offering 10% in the peak demand, during summertime. This paper investigates what the capacity credit would be, i.e., up to what extent increasing existing PV capacity by about 20% can be considered as certain, to avoid installing thermal power units. In order to do so, probabilistic techniques have been applied to quantify the load that the installed thermal units in the Cretan power system should be able to meet at any time. In addition, the effect of the additional PV capacity to power system’s reliability is evaluated, introducing a new reliability index and taking into account actual data, regarding the planned and unplanned thermal units’ maintenance. Two scenar... [more]

We propose a paper solar cell based on carbon nanotube (CNT)-composite papers. To fabricate this cell, we use dye-sensitized solar cells (DSCs) for generating power through the redox reaction of dyes in conjunction with CNT-composite papers, which are composite materials containing CNTs and pulp (raw paper material) that can be fabricated easily by using a method based on the Japanese washi papermaking technique. The demand for CNT applications is expected to increase due to their high conductivity and metallic or semiconducting characteristics. This CNT-composite paper can also have metallic or semiconducting characteristics based on the contained CNTs in the composite paper. We previously fabricated a DSC that generates electricity by using CNT-composite papers stacked in a typical DSC structure. However, the conversion efficiency of this DSC was just 0.188%, which is not practical. To overcome this low power generation issue, we tried improving the DSC structure by applying electrod... [more]

Palm empty fruit bunches (EFB) is known as problematic biomass due to its high alkali content, i.e., more than half of inorganic matter is potassium (K). EFB when used as a fuel in fluidized beds with silica sand as bed material could form the sticky compound K2O·nSiO2 starting at around 750 °C and adhere bed particles together, resulting in bed agglomeration. Blending EFB with rubber wood sawdust (RWS) could improve the chemical properties and consequent ash composition of the blended fuel. In this study, RWS was blended with EFB at three ratios: RWS:EFB = 25:75, RWS:EFB = 50:50, and RWS:EFB = 75:25. Adding RWS to the fuel prolonged de-fluidization time. The high content of CaO in the RWS ash acted as an inhibitor to prevent the formation of K2O·nSiO2 and, instead, enhanced the formation of K2CO3, a higher melting point compound, which reduced bed agglomeration. During the experiment using RWS:EFB = 75:25, no bed agglomeration was found.

The present study investigates the quality changes of wood bio-briquette fuel after the addition of spent coffee ground (SCG) into the initial feedstock materials (sawdust, shavings) in different mass ratios (1:1, 1:3). Analysis of SCGs fuel parameter proved great potential for energy generation by a process of direct combustion. Namely, level of calorific value (GCV = 21.58 MJ∙kg−1), of ash content (Ac = 1.49%) and elementary composition (C = 55.49%, H = 7.07%, N = 2.38%, O = 33.41%) supports such statement. A comparison with results of initial feedstock materials exhibited better results of SCG in case of its calorific value and elementary composition. Bulk density ρ (kg·m−3) and mechanical durability DU (%) of bio-briquette samples from initial feedstock materials were following for sawdust: ρ = 1026.39 kg·m−3, DU = 98.44% and shavings: ρ = 1036.53 kg·m−3, DU = 96.70%. The level of such mechanical quality indicators changed after the addition of SCG. Specifically, SCG+sawdust mixtur... [more]

An air-separation unit (ASU) uses atmospheric air to produce essential pure gaseous and liquid products for many industrial sectors but requires intensive power consumption. In recent years, cryogenic liquid turbine expanders have been used to replace the traditional J-T valves in air-separation units to save energy. In this paper, an effective design optimization method is proposed to suppress swirling flow and mitigate cavitation in liquid turbines. A flexible tuning of the impeller and fairing cone geometries is simultaneously realized, where the optimization variables are identified via a geometric sensitivity study. A novel objective function is deliberately established by allowing both swirling flow and cavitation characteristics, driving the optimizer to search for deswirling and cavitation-resistant geometries. A kriging surrogate model with an adaptive sampling strategy and a cooperative co-evolution algorithm (CCEA) are incorporated to solve the highly nonlinear optimization... [more]

A compressor is an indispensable component of marine large two-stroke diesel engines. For this type of engine, the compressor mass flow rate and isentropic efficiency empirical models are preferred for both the working cycle dynamic simulation research and the design and testing of control and diagnostics algorithms due to their compact and simple structures, and satisfactory prediction accuracy. Due to absence of comprehensive applicable and comparative research on compressor mass flow rate and isentropic efficiency empirical models for large-scale marine compressors in the literature, two marine compressors with different size, flow rate range, and speed range were selected as research objects in this paper, and a relevant study was conducted to compare and analyze the prediction ability of several classical models, and some recently proposed compressor mass flow rate and isentropic efficiency empirical models. The range of this comparative study includes the prediction accuracy in t... [more]

This paper describes a system to support the development and assessment of methodologies that explore the energy flexibility provided by electric water heaters. The proposed system follows a modular approach and allows users to share and remotely control the referred devices. The operation of this system is presented in this paper considering a case study where the energy flexibility provided by a 100 L electric water heater is used to reduce electricity costs under the Portuguese tariff context. The collected results reveal that increasing the available energy flexibility leads to larger savings. These results also show that the referred savings depend on the instant associated to hot water consumption events.

A novel thermodynamic cycle for adsorption heat pumps and chillers is presented. It shows a significant improvement of the internal heat recovery between the adsorption and the desorption half cycle. A stratified thermal storage, which allows for a temperature-based extraction and insertion of storage fluid, is hydraulically coupled with a single adsorber. The benefit is an increased efficiency by reusing the released heat of adsorption for regeneration of the adsorber and by rendering possible low driving temperature differences. For investigating the second law of this cycle, a dynamic model is employed. The transient behavior of the system and the respective losses because of driving temperature differences at the heat exchangers and losses due to mixing within the storage and to the surroundings are depicted in this one-dimensional model. The model is suitable both for analyzing this advanced cycle as well as for comparisons with other cycles.

The environment for practical applications of an energy storage system (ESS) in a microgrid system is very harsh, and therefore actual operating conditions become complex and changeable. In addition, the signal of the ESS sampling process contains a great deal of system and measurement noise, the sampled current fluctuates significantly, and also has high frequency. In this case, under such conditions, it is difficult to accurately estimate the state of charge (SOC) of the batteries in the ESS by common estimation methods. Therefore, this study proposes a compound SOC estimation method based on wavelet transform. This algorithm is very suitable for microgrid systems with large current, frequent fluctuating conditions, and high noise interference. The experimental results and engineering data show that the relative error of the method is 0.5%, which is much lower than the extend Kalman filter (EKF) based on wavelet transform.

Carbon dioxide transcritical power cycle (CTPC) is suitable for engine waste heat recovery owing to its advantages, such as compact construction and high decomposition temperature. In addition, the addition of refrigerant can further improve the performance of pure carbon dioxide (CO2). Because there are limited studies considering the dynamic performance of CTPC systems with CO2 mixture as the working fluid (CMTPC), let alone the dynamic performance comparison of different structures of the CMTPC system, the object of the current work was to compare the dynamic performance, including the off-design performance and dynamic response speed, of four kinds of CMTPC systems, as well as their sensitivity to system input parameters. The dynamic models of four CMTPC systems were established and validated against experimental data, which includes basic CMTPC (B-CMTPC), CMTPC with a preheater (P-CMTPC), CMTPC with a recuperator (R-CMTPC), and CMTPC with both a recuperator and preheater (PR-CMTPC... [more]

Composite bucket foundations, which have been successfully transported, installed, and operated at the Qidong, Xiangshui, and Dafeng offshore wind farms in China, are economically advantageous due to the relatively simple transportation and installation process. The innovative one-step transportation and installation technology of foundation-tower-nacelle is the key phase in saving costs. In this paper, a “foundation lift ship” overall transport mode is proposed and introduced for the first time. Prototype data measurement, preliminary numerical simulation, and theoretical calculations were conducted to investigate whether the foundation-ship integrity, tower hoop stability, and various indexes of the nacelle met the requirements under the influences of various environmental factors. The multi-system coupling motion mechanism and analysis method of this new structure and transportation mode were expounded. Through the prototype observation data of the one-step overall transportation, t... [more]

Water electrolysis with a fast change of polarity generates a high concentration of bulk nanobubbles containing H 2 and O 2 gases. When this concentration reaches a critical value, a microbubble pops up, which is terminated quickly in an explosion process. In this paper, we provide experimental information on the phenomenon concentrating on the dynamics of exploding microbubble observed from the top and from the side. An initial bubble with a size of 150 μ m expands to a maximum size of 1200 μ m for 150 μ s and then shrinks in the cavitation process. The sound produced by the event is coming from two sources separated in time: exploding bubble and cavitating bubble. The observed dynamics supports expansion of the bubble with steam but not with H 2 and O 2 mixture. A qualitative model of this puzzling phenomenon proposed earlier is refined. It is demonstrated that the pressure and temperature in the initial bubble can be evaluated... [more]

South Africa’s energy consumption takes up about one-third of that in the whole African continent, ranking the first place in Africa. However, there are few researches on the prediction of energy consumption in South Africa. In this study, based on the data of South Africa’s energy consumption during 1998−2016, Autoregressive Integrated Moving Average (ARIMA) model, nonlinear grey model (NGM) and nonlinear grey model−autoregressive integrated moving average (NGM-ARIMA) model are adopted to predict South Africa’s energy consumption during 2017−2030. After using these NGM, ARIMA and NGM-ARIMA, the mean absolute percent errors (MAPE) are 2.827%, 2.655% and 1.772%, respectively, which indicates that the predicted result has very high reliability. The prediction results show that the energy consumption in South Africa will keep increasing with the growth rate of about 7.49% in the next 14 years. This research result will provide scientific basis for the policy adjustment of energy supply an... [more]

The social cost, as one of the factors determining sustainability of socio-economic development, is strongly dependent upon a number of casualties and mortality in road accidents. The condition of car tires appears to be one of the important factors determining the occurrence of accidents. The vast majority of vehicles are tested every year at vehicle inspection stations. One of the elements affecting the result of the technical condition test and basically the quality of vehicle braking is the technical condition of the tires. Their technical condition is a very important factor responsible for the quality of acceleration, braking, maintaining, or changing the direction of driving. As a consequence, it has a significant impact on road safety. The aim of the study is to examine the impact of tires on the results of tests performed at a vehicle inspection station. The study presents the results of bench measurements of the impact of selected features of tire condition of two vehicles du... [more]

The Philippines consists of 7100 islands, many of which still use fossil fuel diesel generators as the main source of electricity. This supply can be complemented by the use of renewable energy sources. This study uses a Philippine offshore island to optimize the capacity configuration of a hybrid energy system (HES). A thorough investigation was performed to understand the operating status of existing diesel generator sets, load power consumption, and collect the statistics of meteorological data and economic data. Using the Hybrid Optimization Models for Energy Resources (HOMER) software we simulate and analyze the techno-economics of different power supply systems containing stand-alone diesel systems, photovoltaic (PV)-diesel HES, wind-diesel HES, PV-wind-diesel HES, PV-diesel-storage HES, wind-diesel-storage HES, PV-wind-diesel-storage HES. In addition to the lowest cost of energy (COE), capital cost, fuel saving and occupied area, the study also uses entropy weight and the Techni... [more]

Medium and low-rank coal from the Zhunnan coalfield of Xinjiang in China was investigated for quantitatively characterizing its range of aperture structure. The pore parameters were determined by nitrogen adsorption at low temperature and mercury injection at high pressure, and the full aperture was determined. The FHH model, Menger model, Sierpinski model, and a thermodynamic model were used to calculate the comprehensive fractal dimension of the coal samples over the full range of aperture. The fractal characteristics of the pores of medium- and low-rank coal were quantitatively analyzed, which provided a reference for the overall characterization of pore structure heterogeneity in this coalfield. The results show that the FHH model and thermodynamic model more accurately calculate the fractal dimensions of less and greater than the joint pore position, respectively. The comprehensive fractal dimension of the low-rank coal pore is 2.8005−2.8811 and that of medium rank coal is 2.5710−... [more]

Different alternatives are being studied nowadays in order to enhance the behavior of transcritical CO2 refrigeration plants. Among the most studied options, subcooling is one of the most analyzed methods in the last years, increasing cooling capacity and Coefficient Of Performance (COP), especially at high hot sink temperatures. A new cycle, called integrated mechanical subcooling cycle, has been developed, as a total-CO2 solution, to provide the subcooling in CO2 transcritical refrigeration cycles. It corresponds to a promising solution from the point of view of energy efficiency. The purpose of this work is to present, for the first time, thermodynamic analysis of a CO2 refrigeration cycle with integrated mechanical subcooling cycle from first and second law approaches. Using simplified models of the components, the optimum operating conditions, optimum gas-cooler pressure, and subcooling degree are determined in order to obtain the maximum COP. The main energy parameters of the sys... [more]

Renewable energy ship was regarded as one of the ship energy technologies with a good prospect. In order to study the application of solar and wind energy on ships in the marine environment and the impact of ship rolling on the system, the feasibility of applying solar energy and wind energy to ships was analyzed, and the structural composition of ship power system incorporating renewable energy source was studied. The model of the ship power system integrated with renewable energy was built in PSCAD/EMTDC simulation software. The layout of wind power generation system and photovoltaic power generation system was given for the actual ship, and the ship parameters and specific parameters of each simulation module were determined. It can be seen that the rolling of ship will cause fluctuations in the grid-connected power of the photovoltaic power generation system and the wind power generation system from the comparison of the simulation curves. Finally, a simulation experiment is provid... [more]

Underwater deployed sensors nodes are energy-constrained. Therefore, energy efficiency becomes crucial in underwater wireless sensor networks (U-WSNs). The adverse channel corrupts the packets and challenges their reliability. To handle these challenges, two routing schemes are introduced in this paper. They are effective energy and reliable delivery (EERD) and cooperative effective energy and reliable delivery (CoEERD). In EERD, the packets follow single-path routing and the best forwarder node is selected using a weight function such that packets are transferred via the reliable paths with low energy usage. Packet transfer via a single route in EERD has, however, compromised reliability as the undersea links bear harshness and unpredictability. Therefore, the CoEERD scheme adds cooperative routing to EERD, in which a relay node is introduced between a source−destination pair. The destination requests the relay when the packets it gets from the source are corrupted beyond a threshold... [more]

This work explores the possibility to adopt in organic Rankine cycle (ORC) plants mixtures of water (acting as solvent) plus an organic compound (acting as solute) as the working fluid. Initially an evaluation of the thermodynamic properties of the mixtures is performed, in order to assess their properties, and to point out the molar fractions which entail a near-azeotropic behaviour. Four species from three different classes of chemical compounds are investigated: 2,2,2-trifluoroethanol and n-butanol for alcohols, where the first is fluorinated, acetonitrile for nitrile class and 2-methylpyrazine as a heterocyclic aromatic compound. Simultaneously, the thermal stability of the pure substances considered as the possible solute for the mixtures is experimentally investigated in order to estimate the temperature applicability range. The ORC plant performance, from a low-enthalpy geothermal heat source (hot water stream from 100 to 200 °C), adopting the selected mixtures as the working fl... [more]