The methodology of profile monitoring combines both the model fitting and statistical process control (SPC) techniques. Over the past ten years, a variety of profile monitoring methods have been proposed and extensively investigated in terms of different process profiles. However, monitoring tasks still exhibit a primary problem in that the errors surrounding the functional relationship are frequently assumed to be independent within every single profile. However, the assumption of independence is an unrealistic assumption in many practical instances. In particular, within-profile autocorrelation often occurs in the profile data. To mitigate the within-profile autocorrelation, a monitoring method incorporating an autoregressive (AR)(1) model to cope with autocorrelation is proposed. In this paper, the reflow process with small samples in surface mount technology (SMT) is investigated. In Phase I, three different process models are compared in combination with the first-order autoregres... [more]

In this paper, a novel pattern-based method is developed for the generation of optimal schedules for energy-integrated batch process systems. The proposed methodology is based on the analysis of available schedules for the identification of repetitive patterns. It is shown that optimal schedules of energy-integrated batch processes are composed of several repeating sections (or building blocks), and their sizes and relative positions are dependent on the scheduling horizon and constraints. Based on such a decomposition, the proposed pattern-based algorithm generates an optimal schedule by computing the number and sequence of these blocks. The framework is then integrated with rigorous optimization-based approach wherein it is shown that the learning from the pattern-based solution significantly improves the performance of rigorous optimization. The main advantage of the pattern-based method is the significant reduction in computational time required to solve large scheduling problems,... [more]

Surface water is an important source of water supply for irrigation purpose and in urban areas, sewage water is being disposed of in nearby canals without treatment. A study was conducted to investigate the dynamics of water quality of irrigation canal as a result of this practice. The study ascertained the impact of different salinity parameters, indices and approaches to examine the hazardous effects on quality of canal water. The study analyses the samples collected for various parameters like pH, TDS, EC, Na, Cl, Ca, Mg, K, CO₃, HCO₃ etc. It helped to decide the restriction on use of water based on FAO-UN guidelines. Investigations were focused on assessment of contaminants affecting the quality of water and having hazardous effects on different stages of irrigation water usage. Wilcox diagram and Doneen’s approach-based analysis helped to identify the class and quality of water. This study shall help to analyze the quality of water and provide support to the decision makers for be... [more]

The DEM (Discrete Element Method) is one option for studying the kinematic behaviour of cylindrical pellets. The DEM experiments attempted to optimize the numerical model parameters that affected time and velocity as a cylindrical vessel emptied. This vessel was filled with cylindrical pellets. Optimization was accomplished by changing the coefficient of friction between particles and selecting the length accuracy grade of the sample cylindrical pellets. The initial state was a series of ten vessel-discharge experiments evaluated using PIV (Particle Image Velocimetry). The cylindrical pellet test samples were described according to their length in three accuracy grades. These cylindrical pellet length accuracy grades were subsequently used in the DEM simulations. The article discusses a comparison of the influence of the length accuracy grade of cylindrical pellets on optimal calibration of time and velocity when the cylindrical vessel is emptied. The accuracy grade of cylindrical pell... [more]

A palm oil mill produces crude palm oil, crude palm kernel oil and other biomass from fresh fruit bunches. Although the milling process is well established in the industry, insufficient research and development reported in optimising and analysing the operations of a palm oil mill. The performance of a palm oil mill (e.g., costs, utilisation and flexibility) is affected by factors such as operating time, capacity and fruit availability. This paper presents a hybrid combined mathematical programming and graphical approach to solve and analyse a palm oil mill case study in Malaysia. The hybrid approach consists of two main steps: (1) optimising a palm oil milling process to achieve maximum economic performance via input-output optimisation model (IOM); and (2) performing a feasible operating range analysis (FORA) to study the utilisation and flexibility of the developed design. Based on the optimised results, the total equipment units needed is reduced from 39 to 26 unit, bringing down t... [more]

As debris flow is one of the most destructive natural disasters in many parts of the world, the assessment and management of future debris flows with proper forecasting methods are crucial for the safety of life and property. So increasing attention has been paid to the forecasting methods on debris flows. A debris flow forecasting method based on the rainfall-unstable soil coupling mechanism (R-USCM) is presented in the current study. This method is based on the debris flow formation mechanism. The density of sediment is introduced as an evaluation index to determine the susceptibility of debris flow occurrence. The forecasting method includes two phases: (1) rainfall and soil coupling and (2) runoff and unstable soil coupling. Scoops3D, a three-dimensional (3D) model for analyzing slope stability, was introduced into the debris flow forecasting method. In order to test the forecasting accuracy of this method, Jiaohe County was selected as a research area, and the serious debris flow... [more]

This paper proposes the series connected fuzzy-proportional integral (SF-PI) controller, which is composed of the fuzzy control and the PI controller to improve temperature control performance of dehumidifier using a thermoelectric element. The control of conventional PI controller usually uses fixed gain. For that reason, it is limited in achieving satisfactory control performance in both transient-state and steady-state. The fuzzy control within SF-PI controller adjusts the input value of PI controller according to operating condition. The PI controller within the SF-PI controller controls the temperature of the thermoelectric element using that value. The SF-PI controller can achieve more accurate temperature control than a conventional PI controller for that reason. The SF-PI controller has been tested for various indoor environmental conditions such as temperature and relative humidity conditions. The average temperature error of the SF-PI controller between the reference temperat... [more]

Recent in vitro experiments have demonstrated the ability of the pathogen Clostridium difficile and commensal gut bacteria to form biofilms on surfaces, and biofilm development in vivo is likely. Various studies have reported that 3%⁻15% of healthy adults are asymptomatically colonized with C. difficile, with commensal species providing resistance against C. difficile pathogenic colonization. C. difficile infection (CDI) is observed at a higher rate in immunocompromised patients previously treated with broad spectrum antibiotics that disrupt the commensal microbiota and reduce competition for available nutrients, resulting in imbalance among commensal species and dysbiosis conducive to C. difficile propagation. To investigate the metabolic interactions of C. difficile with commensal species from the three dominant phyla in the human gut, we developed a multispecies biofilm model by combining genome-scale metabolic reconstructions of C. difficile, Bacteroides thetaiotaomicron from the p... [more]

To increase manufacturing flexibility and system understanding in pharmaceutical development, the FDA launched the quality by design (QbD) initiative. Within QbD, the design space is the multidimensional region (of the input variables and process parameters) where product quality is assured. Given the high cost of extensive experimentation, there is a need for computational methods to estimate the probabilistic design space that considers interactions between critical process parameters and critical quality attributes, as well as model uncertainty. In this paper we propose two algorithms that extend the flexibility test and flexibility index formulations to replace simulation-based analysis and identify the probabilistic design space more efficiently. The effectiveness and computational efficiency of these approaches is shown on a small example and an industrial case study.

Innovative biologics, including cell therapeutics, virus-like particles, exosomes, recombinant proteins, and peptides, seem likely to substitute monoclonal antibodies as the main therapeutic entities in manufacturing over the next decades. This molecular variety causes a growing need for a general change of methods as well as mindset in the process development stage, as there are no platform processes available such as those for monoclonal antibodies. Moreover, market competitiveness demands hyper-intensified processes, including accelerated decisions toward batch or continuous operation of dedicated modular plant concepts. This indicates gaps in process comprehension, when operation windows need to be run at the edges of optimization. In this editorial, the authors review and assess potential methods and begin discussing possible solutions throughout the workflow, from process development through piloting to manufacturing operation from their point of view and experience. Especially,... [more]

The objective of this paper is to evaluate and to simulate the cogeneration process applied to an apartment building in the Polanco area (Mexico). Considering the building’s electric, thermal demand and consumption data, the cogeneration process model was simulated using Thermoflow© software (Thermoflow Inc., Jacksonville, FL, USA), in order to cover 1.1 MW of electric demand and to supply the thermal needs of hot water, heating, air conditioning and heating pool. As a result of analyzing various schemes of cogeneration, the most efficient scheme consists of the use of a gas turbine (Siemens model SGT-100-1S), achieving a cycle with efficiency of 84.4% and a heat rate of 14,901 kJ/kWh. The economic results of this evaluation show that it is possible to implement the cogeneration in the building with a natural gas price below US$0.014/kWh. The use of financing schemes makes the economic results more attractive. Furthermore, the percentage of the turbine load effect on the turbine load n... [more]

A major challenge in model-based design of synthetic biochemical circuits is how to address uncertainty in the parameters. A circuit whose behavior is robust to variations in the parameters will have more chances to behave as predicted when implemented in practice, and also to function reliably in presence of fluctuations and noise. Here, we extend our recent work on automated-design based on mixed-integer multi-criteria dynamic optimization to take into account parametric uncertainty. We exploit the intensive sampling of the design space performed by a global optimization algorithm to obtain the robustness of the topologies without significant additional computational effort. Our procedure provides automatically topologies that best trade-off performance and robustness against parameter fluctuations. We illustrate our approach considering the automated design of gene circuits achieving adaptation.

In order to obtain high-purity flavonoid products, the extracts from mulberry leaves were separated and purified via high-speed counter-current chromatography (HSCCC). Moreover, the product was detected via high-performance liquid chromatography (HPLC). The characteristic absorption wavelength of the rutin standard for HSCCC detection and HPLC analysis at 257 nm was tested by ultraviolet scanning analysis. The effect of solvent systems and mobile phase flow rate on the separation efficiency were then researched. Finally, the solvent system of V(ethyl acetate):V(n-butanol):V(water) = 4:1:5 was selected as the operating system for HSCCC. This work theoretically analyzed the impact of the molecular structure and polarity of flavonoids on the choice of solvent systems. The results showed that the mobile phase flow rate had a great influence on the separation efficiency. Furthermore, the separation efficiency increased as the mobile phase flow rate decreased. When the mobile phase flow rate... [more]

In this study, we attempted the preparation of gac oil-loaded solid lipid nanoparticles (SLNs) by the high-speed homogenization method using Naterol SE solid lipid, a cosmetic self-emulsifying base, and surfactant and investigated the effects of different conditions on the characteristics of the resulting nanoparticles. The suspensions containing 5% active agents (gac-oil, w/w) were dispersed in a surfactant concentration of 5% (w/w) (Span 80:Tween 80 ratio of 28:72 w/w) and 2.5% (w/w) of solid lipid (Naterol SE) concentration. Suitable conditions for hot homogenization were 13,000 rpm, 60 min and 60 °C for speed, time and temperature, respectively. The suitable conditions for the subsequent cold homogenization were 25 min of homogenization time and 5 °C of temperature. The results showed that the mean size of SLNs-gac oil was 107 nm (measured by laser diffraction spectrometry, LDS), and dried size of SLNs-gac oil ranged from 50 to 80 nm (measured by transmission electron microscope, T... [more]

With the rapid development of computer science and information and communication technology (ICT), increasingly intelligent, and complex systems have been applied to industries as well as human life. Fault-tolerant control (FTC) has, therefore, become one of the most important topics attracting attention from both engineers and researchers to maintain system performances when faults occur. The ultimate goal of this study was to develop a sensor fault-tolerant control (SFTC) to enhance the robust position tracking control of a class of electro-hydraulic actuators called mini motion packages (MMPs), which are widely used for applications requiring large force-displacement ratios. First, a mathematical model of the MMP system is presented, which is then applied in the position control process of the MMP system. Here, a well-known proportional, integrated and derivative (PID) control algorithm is employed to ensure the positional response to the reference position. Second, an unknown input... [more]

Melissa Officinalis L. (MOL) domestic preparations appropriate for consumption were studied by monitoring content in Na, K, Ca, Li, phenolic bioactives (total phenols, hydroxycinnamic acid derivatives and flavonols), and antioxidant activity (1,1-diphenyl-2-picrylhydrazyl radical inhibition (DPPH) and ferric reducing ability (FRAP)). The effects of practice applied, material to solvent ratio, time of preparation, and solvent were studied. MOL decoctions and infusions, commonly prepared at home, were better or of equal nutritional value to preparations upon ultrasounds or maceration concerning the studied parameters. Aqueous MOL preparations were richer in total phenols (704⁻1949 mg per 250 mL) and the examined macroelements (1.1⁻2.9, 30.5⁻288.4 and 50.1⁻176.1 mg Na, K and Ca per 250 mL, respectively) and showed better antioxidant activity compared to ethanol counterparts. The 25% w/v hydroethanolic MOL preparations, suitable for consumption, presented a significant content in phenolic... [more]

Thailand’s economy is developing rapidly, with energy being a significant factor in this development. This study uses a variety of models to assess the performance of Thailand’s energy industry in two different phases, the first being from 2013 to 2017 and the second from 2018 to 2020. The Malmquist model-one of data envelopment required input and output data that showed Thailand’s productivity index and the rate-of-change ratio, which is used to assess technical changes, change efficiency, and productivity changes of the 12 listed companies in energetic generation and distribution in Thailand. To calculate future indicators, the forecast data are generated by applying the Grey model (1,1) GM(1,1). Accuracy prediction is determined by the mean absolute percentage error (MAPE). The results show that the magnitude of the change in efficiency during the first period is stable, and some major changes in the technical level of some companies may be observed. In the future, the performance o... [more]

This work investigates the environmental and economic performances of a membrane reactor for hydrogen production from raw biogas. Potential benefits of the innovative technology are compared against reference hydrogen production processes based on steam (or autothermal) reforming, water gas shift reactors and a pressure swing adsorption unit. Both biogas produced by landfill and anaerobic digestion are considered to evaluate the impact of biogas composition. Starting from the thermodynamic results, the environmental analysis is carried out using environmental Life cycle assessment (LCA). Results show that the adoption of the membrane reactor increases the system efficiency by more than 20 percentage points with respect to the reference cases. LCA analysis shows that the innovative BIONICO system performs better than reference systems when biogas becomes a limiting factor for hydrogen production to satisfy market demand, as a higher biogas conversion efficiency can potentially substitut... [more]

This paper proposes a microelectric power grid that includes wind and fuel cell power generation units, as well as a water electrolyzer for producing hydrogen gas. The grid is loaded by an induction motor (IM) as a dynamic load and constant impedance load. An optimal control algorithm using the Mine Blast Algorithm (MBA) is designed to improve the performance of the proposed renewable energy system. Normally, wind power is adapted to feed the loads at normal circumstances. Nevertheless, the fuel cell compensates extra load power demand. An optimal controller is applied to regulate the load voltage and frequency of the main power inverter. Also, optimal vector control is applied to the IM speed control. The response of the microgrid with the proposed optimal control is obtained under step variation in wind speed, load impedance, IM rotor speed, and motor mechanical load torque. The simulation results indicate that the proposed renewable generation system supplies the system loads perfec... [more]

In this study, the patterns of chloride ion erosion of unsaturated concrete subjected to the coupling action of cyclic loading and salt spray corrosion were experimentally studied, and Fick’s Second Law was used to fit the variation patterns of chloride concentration to obtain the chloride diffusion coefficient. Accordingly, we have established a mathematical model that describes chloride transport in unsaturated concrete and accounts for the effects of gas flow, water migration, convection diffusion, and capillary action. This model is composed of three equations—the gas flow equation, the solution flow equation, and the solute convection⁻diffusion equation. The COMSOL numerical analysis software was subsequently used to obtain solutions for this model, based on parameters such as porosity and the chloride diffusion coefficient. Subsequently, the saturation, relative permeability, and the chloride ion concentration during the first corrosion cycle were analyzed. The numerical results... [more]

With the rapid increase in production of lithium-ion batteries (LIBs) and environmental issues arising around the world, cathode materials, as the key component of all LIBs, especially need to be environmentally sustainable. However, a variety of life cycle assessment (LCA) methods increase the difficulty of environmental sustainability assessment. Three authoritative LCAs, IMPACT 2002+, Eco-indicator 99(EI-99), and ReCiPe, are used to assess three traditional marketization cathode materials, compared with a new cathode model, FeF₃(H₂O)₃/C. They all show that four cathode models are ranked by a descending sequence of environmental sustainable potential: FeF₃(H₂O)₃/C, LiFe0.98Mn0.02PO₄/C, LiFePO₄/C, and LiCoO₂/C in total values. Human health is a common issue regarding these four cathode materials. Lithium is the main contributor to the environmental impact of the latter three cathode materials. At the midpoint level in different LCAs, the toxicity and land issues for LiCoO₂/C, the non-... [more]

The current competitive environment demands companies to be more and more efficient. In order to increase manufacturing efficiency, two apparently independent approaches have emerged: lean strategies, focusing on identifying and minimizing non-added value activities, identifying wastes in the system and their elimination, and information tools for planning and controlling activities. In this paper, a manufacturing system was considered for which it was necessary to increase the production capacity in order to respond to the customer’s increased demand. A practical case study in the automotive industry for a medium-sized enterprise was considered. In order to investigate the production process parameters and to implement lean principles, Value Stream Mapping (current analysis and optimized solution) and Anylogic agent-based simulations were carried out. Based on this, the lean performances, specific for the target VSM, were evaluated in terms of key performance indicators. The benefits... [more]

Reduction of carbon dioxide emission from natural and industrial flue gases is paramount to help mitigate its effect on global warming. Efforts are continuously deployed worldwide to develop efficient technologies for CO₂ capture. The use of environment friendly amino acids as rate promoters in the present amine systems has attracted the attention of many researchers recently. In this work, the reaction kinetics of carbon dioxide with blends of N-methyldiethanolamine and L-Arginine was investigated using stopped flow technique. The experiments were performed over a temperature range of 293 to 313 K and solution concentration up to one molar of different amino acid/amine ratios. The overall reaction rate constant (kov) was found to increase with increasing temperature and amine concentration as well as with increased proportion of L-Arginine concentration in the mixture. The experimental data were fitted to the zwitterion and termolecular mechanisms using a nonlinear regression techniqu... [more]

A microgrid is a group of many small-scale distributed energy resources, such as solar/wind energy sources, diesel generators, energy storage units, and electric loads. As a small-scale power grid, it can be operated independently or within an existing power grid(s). The microgrid energy management system is a system that controls these components to achieve optimized operation in terms of price by reducing costs and maximizing efficiency in energy consumption. A post-Industry-4.0 consumer requires an optimal design and control of energy storage based on a demand forecast, using big data to stably supply clean, new, and renewable energy when necessary while maintaining a consistent level of quality. Thus, this study focused on software technology through which an optimized operation schedule for energy storage in a microgrid is derived. This energy storage operation schedule minimizes the costs involved in electricity use. For this, an optimization technique is used that sets an object... [more]

The Microbiome Regression-based Kernel Association Test (MiRKAT) is widely used in testing for the association between microbiome compositions and an outcome of interest. The MiRKAT statistic is derived as a variance-component score test in a kernel machine regression-based generalized linear mixed model. In this brief report, we show that the MiRKAT statistic is proportional to the R 2 (coefficient of determination) statistic in a similarity matrix regression, which characterizes the fraction of variability in outcome similarity, explained by microbiome similarity (up to a constant).