This study considers whether electric vehicles (EVs) can be exploited as a flexibility management strategy to stimulate investments in and operation of renewable electricity under stringent CO2 constraints in four regions with different conditions for renewable electricity (Sweden, Germany, the UK, and Spain). The study applies a cost-minimisation investment model and an electricity dispatch model of the European electricity system, assuming three types of charging strategies for EVs. The results show that vehicle-to-grid (V2G), i.e., the possibility to discharging the EV batteries back to grid, facilitates an increase in investments and generation from solar photovoltaics (PVs) compare to the scenario without EVs, in all regions except Sweden. Without the possibility to store electricity in EV batteries across different days, which is a technical limitation of this type of model, EVs increase the share of wind power by only a few percentage points in Sweden, even if Sweden is a region... [more]

The policy decision of extending electric power transmission lines to connect a remote area to a primary grid vs. developing local electricity generation resources must be informed by studies considering both alternatives’ economic and environmental outcomes. Such analysis must also consider the uncertainty of several factors such as fuel prices, the cost and performance of renewable and conventional power generation technologies, and the value of environmental benefits. This paper presents a method for this analysis, making two main contributions to the literature. First, it shows how to characterize the two alternatives (i.e., main-grid extension vs. local power generation) in detail for precise quantification of their capital and operating costs while guaranteeing that they are both adequate to meet forecast demand and operating reserves. Second, it shows how to properly account for the economic and environmental implications of renewable energy intermittency and uncertainty through... [more]

Smart and mechanically flexible energy harvesting/storage devices are attractive for the immensely growing electronic, automobile, medical, and aerospace markets. The leading challenges with current devices are their limitations regarding installation on curvy design, high-manufacturing cost, and lower production rate. Therefore, new design strategies in terms of new materials, cost, and ability to scale up fabrication are imperative to meet the contemporary and future demands of these fast-growing markets. Flexographic printing is one of the newest technologies that promises cost-effective energy devices with better energy harvesting and high storage performance. Current knowledge, selection of suitable materials, and methods of flexographic printing for solar cell and battery construction are reviewed and summarized in this paper in comparison to existing printing technologies. The main purpose of this review is to provide a comprehensive idea of flexographic printing for energy devi... [more]

Intermittent renewable energy is becoming increasingly popular, as storing stationary and mobile energy remains a critical focus of attention. Although electricity cannot be stored on any scale, it can be converted to other kinds of energies that can be stored and then reconverted to electricity on demand. Such energy storage systems can be based on batteries, supercapacitors, flywheels, thermal modules, compressed air, and hydro storage. This survey article explores several aspects of energy storage. First, we define the primary difficulties and goals associated with energy storage. Second, we discuss several strategies employed for energy storage and the criteria used to identify the most appropriate technology. In addition, we address the current issues and limitations of energy storage approaches. Third, we shed light on the battery technologies, which are most frequently used in a wide range of applications for energy storage. The usage and types of batteries are described alongsi... [more]

The implementation of renewable energy sources is rapidly growing in the electrical sector. This is a major step for civilization since it will reduce the carbon footprint and ensure a sustainable future. Nevertheless, these sources of energy are far from perfect and require complementary technologies to ensure dispatchable energy and this requires storage. In the last few decades, redox flow batteries (RFB) have been revealed to be an interesting alternative for this application, mainly due to their versatility and scalability. This technology has been the focus of intense research and great advances in the last decade. This review aims to summarize the most relevant advances achieved in the last few years, i.e., from 2015 until the middle of 2021. A synopsis of the different types of RFB technology will be conducted. Particular attention will be given to vanadium redox flow batteries (VRFB), the most mature RFB technology, but also to the emerging most promising chemistries. An in-de... [more]

The current EU energy and climate policy targets a significant reduction of carbon dioxide emissions in the forthcoming years. Carbon pricing, embedded in the EU emissions trading system, aims at achieving emission reductions in a more evenly spread way and at the lowest overall cost for society, compared with other environmental policy tools, such as coal or electricity taxes, or incentives such as subsidies on renewables. Still, the implementation of the decarbonization policy depends on several technical parameters such as the type, size and connectivity of the energy system as well as economic restrictions that occur. Within this paper, an optimization tool will be presented, focusing on cleaner energy production and on the control and reduction of environmental impact regarding energy storage solutions. Various types of batteries are examined and evaluated towards this direction. Emphasis is given to setting new criteria for the decision-making process, considering the size of bat... [more]

The path to the mitigation of global climate change and global carbon dioxide emissions avoidance leads to the large-scale substitution of fossil fuels for the generation of electricity with renewable energy sources. The transition to renewables necessitates the development of large-scale energy storage systems that will satisfy the hourly demand of the consumers. This paper offers an overview of the energy storage systems that are available to assist with the transition to renewable energy. The systems are classified as mechanical (PHS, CAES, flywheels, springs), electromagnetic (capacitors, electric and magnetic fields), electrochemical (batteries, including flow batteries), hydrogen and thermal energy storage systems. Emphasis is placed on the magnitude of energy storage each system is able to achieve, the thermodynamic characteristics, the particular applications the systems are suitable for, the pertinent figures of merit and the energy dissipation during the charging and discharg... [more]

The present investigation aims to devise a thermal management system (TMS) for electric vehicles able to improve on limitations like charging time and all-electric range, together with the safety and environmental impact of the chosen thermal medium. A research gap is identified, as focus is often on addressing system thermal performance without considering that the thermal medium must not only provide suitable performances, but also must not add risks to both passengers and the environment. Thus, this work proposes an innovative cooling system including graphite sheets and a Loop Heat Pipe, filled with Novec™ 649 as working fluid, due to its exceptional environmental properties (GWP = 1 − ODP = 0) and safety features (non-flammable, non-toxic, dielectric). A three-cell module experimental demonstrator was built to compare temperatures when the proposed TMS is run with Novec™ 649 and ethanol. Results of testing over a bespoke fast charge driving cycle show that Novec™ 649 gave a faster... [more]

An energy management system (EMS) was proposed for a campus microgrid (µG) with the incorporation of renewable energy resources to reduce the operational expenses and costs. Many uncertainties have created problems for microgrids that limit the generation of photovoltaics, causing an upsurge in the energy market prices, where regulating the voltage or frequency is a challenging task among several microgrid systems, and in the present era, it is an extremely important research area. This type of difficulty may be mitigated in the distribution system by utilizing the optimal demand response (DR) planning strategy and a distributed generator (DG). The goal of this article was to present a strategy proposal for the EMS structure for a campus microgrid to reduce the operational costs while increasing the self-consumption from green DGs. For this reason, a real-time-based institutional campus was investigated here, which aimed to get all of its power from the utility grid. In the proposed sc... [more]

A climate-friendly and CO2-neutral energy supply for agricultural farms is the subject of investigation of this study. The supply concerns the internal economy (buildings and animal husbandry) as well as the production of synthetic fuels for outdoor work (cultivation of the fields). This energy is in demand with many customers, e.g., the dairy cooperative Arla Foods, whose goal is the production of cow’s milk with net-zero CO2 emissions by the year 2050. The operational energy system considered here included renewable electricity generation, covering electricity consumption in the cowshed, battery storage for times without electricity generation, the production of synthetic fuels and feeding into the public power grid. Fluctuations depending on the day and the season were taken into account for electricity at 15-min intervals and for fuel per calendar week for one year. The aim was to determine the necessary capacities of renewable energy (RE) generation systems and production systems... [more]

The energy efficiency of a renewable energy system is inextricably linked to the energy storage technologies used in conjunction with it. The most extensively utilized energy storage technology for all purposes is electrochemical storage batteries, which have grown more popular over time because of their extended life, high working voltage, and low self-discharge rate. However, these batteries cannot withstand the very low temperatures encountered in cold regions, even with these very promising technical characteristics. The cold northern temperatures affect the batteries’ electromotive force and thus decrease their storage capacity. In addition, they affect the conductivity of the electrolyte and the kinetics of electrochemical reactions, thus influencing the capacity and speed of electrons in the electrolyte. In this article, which is intended as a literature review, we first describe the technical characteristics of charge−discharge rate of different electrochemical storage techniqu... [more]

In this research, the shuttle effect and the low sulfur activation of lithium−sulfur batteries were mitigated by coating the cathode side of Celgard 2400 separators with mixtures of carbon black/chitosan or carbon black/polyvinylidene fluoride using the simple slurry technique. Carbon nanoparticles and the polar groups of the polymers were responsible for boosting the reaction kinetics of sulfur and the chemical and physical trapping of lithium polysulfides. The adsorption of sulfur species in the coated separators was confirmed by the morphologic changes observed in the AFM and SEM images and by the new elements presented in the EDX spectra after 100 charge/discharge cycles. The high intensity of the peaks in the cyclic voltammograms and the long plateaus in the discharge profiles support the improvement in the reaction kinetics. The batteries with the carbon black/chitosan- and carbon black/polyvinylidene fluoride-coated separators reached high specific discharge capacities of 833 an... [more]

Generation dispatching is a challenge in islanded microgrids due to the operational and economic restrictions in isolated zones. Furthermore, the impact of usual operational network changes in topology, load demand, and generation availability may become significant considering the grid size. This research paper presents a detailed multiple cost function modeling methodology of an optimal power flow algorithm applied to a non-interconnected zone in Colombia. The optimal power flow (OPF) formulation includes cost functions related to renewable resources as presented in the isolated zone and a complete model of the charging and discharging of batteries. Additionally, the flexibility of the proposal is tested using three different network topologies with a characteristic daily load curve from the zone. The main contribution of this paper lies in the implementation of an optimal power flow including cost functions of renewable sources for isolated microgrids. A test case for a non-intercon... [more]

Energy storage systems is expected to be utilized to cover the increased electrification of energy demands and to alleviate the electrical energy production from intermittent energy sources such as solar and wind. Aggregated and distributed battery energy storage systems may improve electricity grids operability and security by providing smart energy management options and efficient resources allocation. In this paper, battery storage at the secondary distribution level is explored. The investigation is based on the end-user energy demand behavior. As such, the electrical energy consumption patterns are measured and analyzed in a residential area. Measurements were collected and analyzed in order to record the customers’ behaviors aiming to reveal their differences and similarities. Following this, aggregated and distributed battery energy storage systems are computed based on the features of the measured electrical power consumption patterns aiming to estimate the factors that could p... [more]

This Editorial summarizes the papers of the Special Issue entitled ‘Advanced Control Techniques for Wind/Solar/Battery Systems’ published in Energies. The Special Issue includes four scientific articles published in 2021 and 2022 in the field of quasi-Z-Source inverter control, photovoltaic energy conversion, battery charge control, wind turbine speed control, and solar irradiance prediction. New scientific achievements with experimental verifications of the achieved results are presented in all articles.

Widespread adoption of heavy-duty (HD) electric vehicles (EVs) will soon necessitate the use of megawatt (MW)-scale charging stations to charge high-capacity HD EV battery packs. Such a station design needs to anticipate possible station traffic, average and peak power demand, and charging/wait time targets to improve throughput and maximize revenue-generating operations. High-power direct current charging is an attractive candidate for MW-scale charging stations at the time of this study, but there are no precedents for such a station design for HD vehicles. We present a modeling and data analysis framework to elucidate the dependencies of a MW-scale station operation on vehicle traffic data and station design parameters and how that impacts vehicle electrification. This framework integrates an agent-based charging station model with vehicle schedules obtained through real-world vehicle telemetry data analysis to explore the station design and operation space. A case study applies thi... [more]

Hybrid Renewable Energy Sources (HRES) integrated into a microgrid (MG) are a cost-effective and convenient solution to supply energy to off-grid and rural areas in developing countries. This research paper focuses on the optimization of an HRES connected to a stand-alone microgrid system consisting of photovoltaics (PV), wind turbines (WT), batteries (BT), diesel generators (DG), and inverters to meet the energy demand of fifteen residential housing units in the city of Djelfa, Algeria. In this context, the multiobjective salp swarm algorithm (MOSSA), which is among the latest nature-inspired metaheuristic algorithms recently introduced for hybrid microgrid system (HMS) optimization, has been proposed in this paper for solving the optimization of an isolated HRES. The proposed multiobjective optimization problem takes into account the cost of energy (COE) and loss of power supply probability (LPSP) as objective functions. The proposed approach is applied to determine three design vari... [more]

Energy storage has become increasingly important as a study area in recent decades. A growing number of academics are focusing their attention on developing and researching innovative materials for use in energy storage systems to promote sustainable development goals. This is due to the finite supply of traditional energy sources, such as oil, coal, and natural gas, and escalating regional tensions. Because of these issues, sustainable renewable energy sources have been touted as an alternative to nonrenewable fuels. Deployment of renewable energy sources requires efficient and reliable energy storage devices due to their intermittent nature. High-performance electrochemical energy storage technologies with high power and energy densities are heralded to be the next-generation storage devices. Transition metal chalcogenides (TMCs) have sparked interest among electrode materials because of their intriguing electrochemical properties. Researchers have revealed a variety of modifications... [more]

Increasing wind generation insertion levels on electrical grids through power converters may cause instabilities in the AC grid due to the intermittent wind nature. Integrating a Battery Electric Energy Storage System (BESS) in wind generation can smooth the power injection at the Common Coupling Point (PCC), contributing to the power system voltage and frequency stability. In this article, it is proposed to analyze the operation of a lithium-ion battery technology based 1 MW/1.29 MWh BESS connected in parallel with wind generation with a capacity of 50.4 MW. The main characteristics investigated are power smoothing and power factor correction. Experimental results show that BESS contributes to smoothing the active power and correcting the power factor of wind generation, improving the quality of electrical energy at the PCC.

Duqm is located in the Al Wasta Governorate in Oman and is currently fed by 10 diesel generators with a total capacity of around 76 MW and other rental power sources with a size of 18 MW. To make the electric power supply come completely from renewables, one novel solution is to replace the diesel with hydrogen. The extra energy coming from the PV-wind system can be utilized to produce green hydrogen that will be utilized by the fuel cell. Measured data of solar insolation, hourly wind speeds, and hourly load consumption are used in the proposed system. Finding an ideal configuration that can match the load demand and be suitable from an economic and environmental point of view was the main objective of this research. The Hybrid Optimization Model for Multiple Energy Resources (HOMER Pro) microgrid software was used to evaluate the technical and financial performance. The findings demonstrated that the suggested hybrid system (PV-wind-fuel cell) will remove CO2 emissions at a cost of e... [more]

Energy is very important in daily life. The smart power system provides an energy management system using various techniques. Among other load types, campus microgrids are very important, and they consume large amounts of energy. Energy management systems in campus prosumer microgrids have been addressed in different works. A comprehensive study of previous works has not reviewed the architecture, tools, and energy storage systems of campus microgrids. In this paper, a survey of campus prosumer microgrids is presented considering their energy management schemes, optimization techniques, architectures, storage types, and design tools. The survey is comprised of one decade of past works for a true analysis. In the optimization techniques, deterministic and metaheuristic methods are reviewed considering their pros and cons. Smart grids are being installed in different campuses all over the world, and these are considered the best alternatives to conventional power systems. However, effici... [more]

Increased renewable energy production and storage is a key pillar of net-zero emission. The expected growth in the exploitation of offshore renewable energy sources, e.g., wind, provides an opportunity for decarbonising offshore assets and mitigating anthropogenic climate change, which requires developing and using efficient and reliable energy storage solutions offshore. The present work reviews energy storage systems with a potential for offshore environments and discusses the opportunities for their deployment. The capabilities of the storage solutions are examined and mapped based on the available literature. Selected technologies with the largest potential for offshore deployment are thoroughly analysed. A landscape of technologies for both short- and long-term storage is presented as an opportunity to repurpose offshore assets that are difficult to decarbonise.

A single production of nitrogen-doped graphene nanosheets was developed in this present work from a spent Zn-C primary battery. The electrochemically exfoliated nitrogen-doped graphene nanosheets (EC-N-GNS) was applied in supercapacitor symmetric devices. As-prepared EC-N-GNS was utilized for a symmetric supercapacitor with natural seawater multivalent ion electrolyte. The recycling of graphite into nitrogen-doped graphene was characterized by X-ray diffraction and RAMAN spectroscopy. The few-layered morphological structures of EC-N-GNS were analyzed by field emission scanning electron microscope and field emission transmission electron microscope. The electrochemical analysis of the cyclic voltammetry curves observed an electrochemical double-layer capacitor (EDLC) behavior with a potential window of −0.8 V to +0.5 V. The electrochemical galvanostatic charge—discharge study was obtained to be maximum specific capacitance (Csp)—67.69 F/g and 43.07 F/g at a current density of 1 A/g. We... [more]

Battery electric tractors (BETs) demonstrate considerable advantages over diesel-fueled tractors, including higher conversion efficiency, higher torque, less maintenance, and no tailpipe emissions. Converting to BETs also requires tradeoffs in the form of the batteries’ high cost, increased weight, limited energy capacity, finite charging cycles, and lengthy charging time. The extent to which small-scale organic vegetable, fruit and cut-flower growers are aware of these tradeoffs is unknown. Little research exists examining these growers’ perceptions, concerns, and willingness to pay for or adopt BETs. Here, we address that gap by conducting qualitative semi-structured interviews with 14 organic growers in the US Midwest, most operating in Michigan. We focus our questions on growers’ motivations, existing tractor-use patterns, and the evaluation of different configurations of a belly-mount open-station cultivating BET. Our results suggest interest in and potential for growers to transi... [more]

The European Union’s energy and climate policies are geared on reducing carbon dioxide emissions and advancing sustainable energy, focusing on a faster propagation of renewable energy sources to decarbonize the energy sector. The management of locally produced energy, which can be implemented by a microgrid capable of either being linked to the main grid or operating independently, is equally crucial. Additionally, it seems that electricity storage is the only practical way to manage energy effectively within a microgrid. Energy storage is hence one of the main technological parameters upon which future energy management has to be based. Especially during crisis periods (such as the COVID-19 pandemic or the ongoing energy crisis), storage is a valuable tool to optimize energy management, particularly from renewables, in order to successfully cover demand fluctuation, hence achieving resilience, while at the same time reducing overall energy costs. The purpose of the paper is to analyze... [more]