To move the world toward a more sustainable energy future, it is crucial to use the limited hydrocarbon geological resources efficiently and to develop technologies that facilitate this. More rational management of petroleum reservoirs and underground gas storage can be obtained by optimizing well control. This paper presents a novel approach to optimal well control based on the combination of optimal control theory, innovative artificial intelligence methods, and numerical reservoir simulations. In the developed algorithm, well control is based on an auto-adaptive parameterized decision tree. Its parameters are optimized by state-of-the-art machine learning, which uses previous results to determine favorable parameters. During optimization, a numerical reservoir simulator is applied to compute the objective function. The developed solution enables full automation of the wells for optimal control. An exemplary application of the developed solution to optimize underground storage of gas... [more]

Using renewable energy sources instead of fossil fuels is one of the best solutions to overcome greenhouse gas (GHG) emissions. However, in designing clean power generation microgrids, the economic aspects of using renewable energy technologies should be considered. Furthermore, due to the unpredictable nature of renewable energy sources, the reliability of renewable energy microgrids should also be evaluated. Optimized hybrid microgrids based on wind and solar energy can provide cost-effective power generation systems with high reliability. These microgrids can meet the power demands of the consuming units, especially in remote areas. Various techniques have been used to optimize the size of power generation systems based on renewable energy to improve efficiency, maintain reliability, improve the power grid’s resilience, and reduce system costs. Each of these techniques has shown its advantages and disadvantages in optimizing the size of hybrid renewable energy systems. To increase t... [more]

The development of each country depends on electricity. In this regard, conventional energy sources, e.g., diesel, petrol, etc., are decaying. Consequently, the investigations of renewable energy sources (RES) are increasing as alternate energy sources for the fulfillment of energy requirements. The output characteristics of RES are becoming non-linear. Therefore, the maximum power point tracking (MPPT) techniques are critical for extracting the maximum power point (MPP) from RES, e.g., photovoltaic (PV) and wind turbines (WT). RES such as the Fuel Cell (FC) has been hailed as one of the major capable RES for automobile applications since they continually create electricity for the dc-link (even if one or both RES are not supplied by solar and wind, the FC will continue to supply to the load). Adaptive Neuro-Fuzzy Inference System (AN-FIS) MPPT for PV, WT, FC, and Hybrid RES is employed in this research article to solve this problem. The high step-ups (boost converters) are connected w... [more]

The farmers’ welfare and its interlinkages to energy efficiency and farm sustainability has attracted global scientific interest within the last few decades. This study examines the contribution of Agriculture 5.0 to the prosperity of the farmers in the post-pandemic era and the gradual transition to an energy-smart farm. To obtain an insight into the attributes of Agriculture 5.0 and the emerging technologies in the field, Bibliometrix analysis with the use of an R package was conducted based on 2000 data consisting of peer-reviewed articles. The data were retrieved from the Scopus database. A bibliometric approach was employed to analyze the data for a comprehensive overview of the trend, thematic focus, and scientific production in the field of Agriculture 5.0 and energy-smart farming. Emerging technologies that are part of Agriculture 5.0 in combination with alternative energy sources can provide cost-effective access to finance, weather updates, remotely monitoring, and future ene... [more]

From a practical point of view, a turbine load cycle (TLC) is defined as the time a turbine in a power plant remains in operation. TLC is used by many electric power plants as a stop indicator for turbine maintenance. In traditional operations, a maximum time for the operation of a turbine is usually estimated and, based on the TLC, the remaining operating time until the equipment is subjected to new maintenance is determined. Today, however, a better process is possible, as there are many turbines with sensors that carry out the telemetry of the operation, and machine learning (ML) models can use this data to support decision making, predicting the optimal time for equipment to stop, from the actual need for maintenance. This is predictive maintenance, and it is widely used in Industry 4.0 contexts. However, knowing which data must be collected by the sensors (the variables), and their impact on the training of an ML algorithm, is a challenge to be explored on a case-by-case basis. In... [more]

Detecting intrusions from the supervisory control and data acquisition (SCADA) systems is one of the most essential and challenging processes in recent times. Most of the conventional works aim to develop an efficient intrusion detection system (IDS) framework for increasing the security of SCADA against networking attacks. Nonetheless, it faces the problems of complexity in classification, requiring more time for training and testing, as well as increased misprediction results and error outputs. Hence, this research work intends to develop a novel IDS framework by implementing a combination of methodologies, such as clustering, optimization, and classification. The most popular and extensively utilized SCADA attacking datasets are taken for this system’s proposed IDS framework implementation and validation. The main contribution of this work is to accurately detect the intrusions from the given SCADA datasets with minimized computational operations and increased accuracy of classifica... [more]

Reinforcement learning has emerged as a potentially disruptive technology for control and optimization of HVAC systems. A reinforcement learning agent takes actions, which can be direct HVAC actuator commands or setpoints for control loops in building automation systems. The actions are taken to optimize one or more targets, such as indoor air quality, energy consumption and energy cost. The agent receives feedback from the HVAC systems to quantify how well these targets have been achieved. The feedback is captured by a reward function designed by the developer of the reinforcement learning agent. A few reviews have focused on the reward aspect of reinforcement learning applications for HVAC. However, there is a lack of reviews that assess how the actions of the reinforcement learning agent have been formulated, and how this impacts the possibilities to achieve various optimization targets in single zone or multi-zone buildings. The aim of this review is to identify the action formulat... [more]

We propose a method to predict performance variables according to the rotor slot shape of a three-phase squirrel cage induction motor using a convolution neural network (CNN) algorithm suitable for utilizing image data. The set of performance variables was labeled according to the images of each training dataset, and this set was generated from the efficiency, power factor, starting torque, and average torque. To verify the accuracy of the trained deep learning model, the analysis and prediction results of the CNN model were compared and verified with nine untrained double cage slot shapes and shapes optimized based on the root mean square error (RMSE). Although a large number of training data are required for high accuracy in the existing image processing deep learning model, the proposed deep learning method can predict the performance variables for various shapes with the same level of accuracy as the finite element analysis results using a small number of training data. Therefore,... [more]

In this paper, gamma attenuation has been utilised as a veritable tool for non-invasive estimation of the thickness of scale deposits. By simulating flow regimes at six volume percentages and seven scale thicknesses of a two phase-flow in a pipe, our study utilised a dual-energy gamma source with Ba-133 and Cs-137 radioisotopes, a steel pipe, and a 2.54 cm × 2.54 cm sodium iodide (NaI) photon detector to analyse three different flow regimes. We employed Fourier transform and frequency characteristics (specifically, the amplitudes of the first to fourth dominant frequencies) to transform the received signals to the frequency domain, and subsequently to extract the various features of the signal. These features were then used as inputs for the group method for data Hiding (GMDH) neural network framework used to predict the scale thickness inside the pipe. Due to the use of appropriate features, our proposed technique recorded an average root mean square error (RMSE) of 0.22, which is a v... [more]

In recent years, demand for electric energy has steadily increased; therefore, the integration of renewable energy sources (RES) at a large scale into power systems is a major concern. Wind and solar energy are among the most widely used alternative sources of energy. However, there is intense variability both in solar irradiation and even more in windspeed, which causes solar and wind power generation to fluctuate highly. As a result, the penetration of RES technologies into electricity networks is a difficult task. Therefore, more accurate solar irradiation and windspeed one-day-ahead forecasting is crucial for safe and reliable operation of electrical systems, the management of RES power plants, and the supply of high-quality electric power at the lowest possible cost. Clouds’ influence on solar irradiation forecasting, data categorization per month for successive years due to the similarity of patterns of solar irradiation per month during the year, and relative seasonal similarity... [more]

A method of positioning a location on a specific object using a wireless sensor has been developed for a long time. However, due to the error of wavelengths and various interference factors occurring in three-dimensional space, accurate positioning is difficult, and predicting future locations is even more difficult. It uses IoT-based node pattern recognition technology to overcome positioning errors or inaccurate predictions in wireless sensor networks. It developed a method to improve the current positioning accuracy in a sensor network environment and a method to learn a pattern of position data directly from a wavelength receiver. The developed method consists of two steps: The first step is a method of changing location data in 3D space to location data in 2D space in order to reduce the possibility of positioning errors in 3D space. The second step is to reduce the range of the moving direction angle in which the data changed in two dimensions can be changed in the future and to... [more]

In predicting energy consumption, classic econometric and statistical models are used to forecast energy consumption. These models may have limitations in an increasingly fast-changing energy market, which requires big data analysis of energy consumption patterns and relevant variables using complex mathematical tools. In current literature, there are minimal comparison studies reviewing machine learning algorithms to predict energy consumption in Korea. To bridge this gap, this paper compared three different machine learning algorithms, namely the Random Forest (RF) model, XGBoost (XGB) model, and Long Short-Term Memory (LSTM) model. These algorithms were applied in Period 1 (prior to the onset of the COVID-19 pandemic) and Period 2 (after the onset of the COVID-19 pandemic). Period 1 was characterized by an upward trend in energy consumption, while Period 2 showed a reduction in energy consumption. LSTM performed best in its prediction power specifically in Period 1, and RF outperfor... [more]

This paper presents an advanced methodology for restoration of the electric power transmission system after its partial or complete failure. This load-optimized restoration is dependent on sectioning of the transmission system based on artificial neural networks. The proposed methodology and the underlying algorithm consider the transmission system operation state just before the fallout and, based on this state, calculate the power grid parameters and suggest the methodology for system restoration for each individual interconnection area. The novel methodology proposes an optimization objective function as a maximum load recovery under a set of constraints. The grid is analyzed using a large amount of data, which results in an adequate number of training data for artificial neural networks. Once the artificial neural network is trained, it provides an almost instantaneous network recovery plan scheme by defining the direct switching order.

The mining industry’s increased energy consumption has resulted in a slew of climate-related effects on the environment, many of which have direct implications for humanity’s survival. The forecast of mine site energy use is one of the low-cost approaches for energy conservation. Accurate predictions do indeed assist us in better understanding the source of high energy consumption and aid in making early decisions by setting expectations. Machine Learning (ML) methods are known to be the best approach for achieving desired results in prediction tasks in this area. As a result, machine learning has been used in several research involving energy predictions in operational and residential buildings. Only few research, however, has investigated the feasibility of machine learning algorithms for predicting energy use in open-pit mines. To close this gap, this work provides an application of machine learning algorithms in the RapidMiner tool for predicting energy consumption time series usin... [more]

The energy generated by a solar photovoltaic (PV) system depends on uncontrollable factors, including weather conditions and solar irradiation, which leads to uncertainty in the power output. Forecast PV power generation is vital to improve grid stability and balance the energy supply and demand. This study aims to predict hourly day-ahead PV power generation by applying Temporal Fusion Transformer (TFT), a new attention-based architecture that incorporates an interpretable explanation of temporal dynamics and high-performance forecasting over multiple horizons. The proposed forecasting model has been trained and tested using data from six different facilities located in Germany and Australia. The results have been compared with other algorithms like Auto Regressive Integrated Moving Average (ARIMA), Long Short-Term Memory (LSTM), Multi-Layer Perceptron (MLP), and Extreme Gradient Boosting (XGBoost), using statistical error indicators. The use of TFT has been shown to be more accurate... [more]

Lithium-ion batteries are widely used as effective energy storage and have become the main component of power supply systems. Accurate battery state prediction is key to ensuring reliability and has significant guidance for optimizing the performance of battery power systems and replacement. Due to the complex and dynamic operations of lithium-ion batteries, the state parameters change with either the working condition or the aging process. The accuracy of online state prediction is difficult to improve, which is an urgent issue that needs to be solved to ensure a reliable and safe power supply. Currently, with the emergence of artificial intelligence (AI), battery state prediction methods based on data-driven methods have high precision and robustness to improve state prediction accuracy. The demanding characteristics of test time are reduced, and this has become the research focus in the related fields. Therefore, the convolutional neural network (CNN) was improved in the data modeli... [more]

Faults and anomalous behavior affect the operation of Heating, Ventilation and Air Conditioning (HVAC) systems. This causes performance loss, energy waste, noncompliance with regulations and discomfort among occupants. To prevent damage, automated, fast identification of faults in HVAC systems is needed. Fault Detection and Diagnosis (FDD) techniques are very effective for these purposes. The best FDD methods, in terms of cost effectiveness and data exploitation, are based on process history; i.e., on sensor data from automation systems. In this work, supervised and semi-supervised models were developed. Other than with regard to outdoor temperature and humidity, the input parameters of an HVAC system have few internal variables. Performance of traditional methods (e.g., VAR, Random Forest) is low, so Artificial Neural Networks (ANNs) were selected, since they can capture nonlinear relationships among features and are easily optimized. ANNs can detect simultaneous faults from different... [more]

Accurate prediction of the compressive strength of concrete is of great significance to construction quality and progress. In order to understand the current research status in the concrete compressive strength prediction field, a bibliometric analysis of the relevant literature published in this field in the last decade was conducted first. The 3135 journal articles published from 2012 to 2021 in the Web of Science core database were used as the database, and the knowledge map was drawn with the help of the visualisation software CiteSpace 6.1R2 to analyse the field at the macro level in terms of spatial and temporal distribution, hotspot distribution and evolutionary trends, respectively. Afterwards, we go into the detail and divide concrete compressive strength prediction methods into two categories: traditional and machine-learning methods, and introduce the typical methods of each. In addition, a boosting-based ensemble machine-learning algorithm, namely the gradient boosting regr... [more]

In the era of Industry 4.0, highly complex production equipment is becoming increasingly integrated and intelligent, posing new challenges for data-driven process monitoring and fault diagnosis. Technologies such as IIoT, CPS, and AI are seeing increasing use in modern industrial smart manufacturing. Cloud computing and big data storage greatly facilitate the processing and management of industrial information flow, which helps the development of real-time fault diagnosis (RTFD) technology. This paper provides a comprehensive review of the latest RTFD technologies in the field of industrial process monitoring and machine condition monitoring. The RTFD process is introduced in detail, starting with the data acquisition process. The current RTFD methods are divided into methods based on independent feature extraction, methods based on “end-to-end” neural networks, and methods based on qualitative knowledge reasoning from a new perspective. In addition, this paper discusses the challenges... [more]

With the development of Industry 4.0, artificial intelligence (AI) is gaining increasing attention for its performance in solving particularly complex problems in industrial chemistry and chemical engineering. Therefore, this review provides an overview of the application of AI techniques, in particular machine learning, in chemical design, synthesis, and process optimization over the past years. In this review, the focus is on the application of AI for structure-function relationship analysis, synthetic route planning, and automated synthesis. Finally, we discuss the challenges and future of AI in making chemical products.

Data-driven electrical energy efficiency management is the emerging trend in electrical energy forecasting and management. This fusion of data science, artificial intelligence, and electrical energy management has turned out to be the most precise and robust energy management solution. The Smart Energy Informatics Lab (SEIL) of the Indian Institute of Technology (IIT) conducted an experimental study in 2019 to collect massive data on university campus energy consumption. The comprehensive comparative study preparatory to the recommendation of the best candidate out of 24 machine learning algorithms on the SEIL dataset is presented in this work. In this research work, an exhaustive parametric and empirical comparative study is conducted on the SEIL dataset for the recommendation of the optimal machine learning algorithm. The simulation results established the findings that Bagged Trees, Fine Trees, and Medium Trees are, respectively, the best-, second-best-, and third-best-performing al... [more]

A growing number of countries worldwide have committed to achieving net zero emissions targets by around mid-century since the Paris Agreement. As the world’s greatest carbon emitter and the largest developing economy, China has also set clear targets for carbon peaking by 2030 and carbon neutrality by 2060. Carbon-reduction AI applications promote the green economy. However, there is no comprehensive explanation of how AI affects carbon emissions. Based on panel data for 270 Chinese cities from 2011 to 2017, this study uses the Bartik method to quantify data on manufacturing firms and robots in China and demonstrates the effect of AI on carbon emissions. The results of the study indicate that (1) artificial intelligence has a significant inhibitory effect on carbon emission intensity; (2) the carbon emission reduction effect of AI is more significant in super- and megacities, large cities, and cities with better infrastructure and advanced technology, whereas it is not significant in... [more]

The widespread popularity of renewable and sustainable sources of energy such as solar and wind calls for the integration of renewable energy sources into electrical power grids for sustainable development. Microgrids minimize power quality issues in the main grid by linking with an active filter and furnishing reactive power compensation, harmonic mitigation, and load balancing at the point of common coupling. The reliability issues faced by standalone DC microgrids can be managed by interlinking microgrids with a power grid. An artificial intelligence-based Icosϕ control algorithm for power sharing and power quality improvement in smart microgrid systems is proposed here to render grid-integrated power systems more intelligent. The proposed controller considers various uncertainties caused by load variations, state of charge of the battery of microgrids, and power tariff based on the availability of power in microgrids. This paper presents a detailed analysis of the integration of wi... [more]

Non-Technical Losses (NTL) represent a serious concern for electric companies. These losses are responsible for revenue losses, as well as reduced system reliability. Part of the revenue loss is charged to legal consumers, thus, causing social imbalance. NTL methods have been developed in order to reduce the impact in physical distribution systems and legal consumers. These methods can be classified as hardware-based and non-hardware-based. Hardware-based methods need an entirely new system infrastructure to be implemented, resulting in high investment and increased cost for energy companies, thus hampering implementation in poorer nations. With this in mind, this paper performs a review of non-hardware-based NTL detection methods. These methods use distribution systems and consumers’ data to detect abnormal energy consumption. They can be classified as network-based, which use network technical parameters to search for energy losses, data-based methods, which use data science and mach... [more]

The design of moisture-durable building enclosures is complicated by the number of materials, exposure conditions, and performance requirements. Hygrothermal simulations are used to assess moisture durability, but these require in-depth knowledge to be properly implemented. Machine learning (ML) offers the opportunity to simplify the design process by eliminating the need to carry out hygrothermal simulations. ML was used to assess the moisture durability of a building enclosure design and simplify the design process. This work used ML to predict the mold index and maximum moisture content of layers in typical residential wall constructions. Results show that ML, within the constraints of the construction, including exposure conditions, does an excellent job in predicting performance compared to hygrothermal simulations with a coefficient of determination, R2, over 0.90. Furthermore, the results indicate that the material properties of the vapor barrier and continuous insulation layer... [more]