Background: Identifying the health status of wind turbines becomes critical to reduce the impact of failures on generation costs (between 25⁻35%). This is a time-consuming task since a human expert has to explore turbines individually. Methods: To optimize this process, we present a strategy based on Self Organizing Maps, clustering and a further grouping of turbines based on the centroids of their SOM clusters, generating groups of turbines that have similar behavior for subsystem failure. The human expert can diagnose the wind farm health by the analysis of a small each group sample. By introducing post-processing tools like Class panel graphs and Traffic lights panels, the conceptualization of the clusters is enhanced, providing additional information of what kind of real scenarios the clusters point out contributing to a better diagnosis. Results: The proposed approach has been tested in real wind farms with different characteristics (number of wind turbines, manufacturers, power,... [more]

After more than ten years of operation of EU-ETS trading, it is time to analyse the results and draw lessons from the experience. Economic research typically considers emission price as the main explanatory variables when measuring the effects of Emission Trading Systems. The novelty of this work is to analyse whether or not trade alone, as an institutional change, is effective in reducing greenhouse gases emissions. The objective of this paper is to analyse to what extent the EU-ETS as a “regulatory” instrument of the supply of allowances is responsible for the effectiveness of the carbon market as a basic tool in the reduction of emissions. The analysis also includes other overlapping policies aimed at fighting climate change, for example, the promotion of renewables. For the empirical analysis, an econometric model is estimated using panel data for the 28 European Union countries between 1990 and 2014. The econometric model include three dummy variables to measure the effectiveness... [more]

This paper demonstrates an RF thermal plasma pyrolysis reaction apparatus that achieves 89 wt.% reaction conversion yield with no tar content. The demonstrated experimental apparatus consists of a 1100 W RFVII Inc. (104 Church St, Newfield, NJ 08344, United States) @ 13.56 MHz RF thermal plasma generator, a Navio matching network, intelligent feedback controller, and an 8-turn copper RF-ICP torch embedded in a 12 L thermochemical reactor. The intelligent feedback controller optimizes the thermal performance based on feedback signals from three online gas analyzers: CO, CO2 and NOx. The feedback controller output signal controls the RF thermal plasma torch current that provides real-time temperature control. The proposed reaction system achieves precise temperature profiles for both pyrolysis and gasification as well as increases end-product yield and eliminates undesired products such as tar and char. The identified hydrocarbon liquid mixture is 90 wt.% gasoline and 10 wt.%. diesel. Th... [more]

Alkaline water electrolysis is a key technology for large-scale hydrogen production powered by renewable energy. As conventional electrolyzers are designed for operation at fixed process conditions, the implementation of fluctuating and highly intermittent renewable energy is challenging. This contribution shows the recent state of system descriptions for alkaline water electrolysis and renewable energies, such as solar and wind power. Each component of a hydrogen energy system needs to be optimized to increase the operation time and system efficiency. Only in this way can hydrogen produced by electrolysis processes be competitive with the conventional path based on fossil energy sources. Conventional alkaline water electrolyzers show a limited part-load range due to an increased gas impurity at low power availability. As explosive mixtures of hydrogen and oxygen must be prevented, a safety shutdown is performed when reaching specific gas contamination. Furthermore, the cell voltage sh... [more]

There is no denial that renewable energy is considered to be the most cost-competitive source of clean power in many parts of the world. Saudi Arabia’s vision 2030 aims at achieving the best by using different sources of renewable energy such as solar energy, wind energy, and others. The use of solar energy in particular for power generation will decrease the dependency on oil, and thus, decrease the greenhouse gasses. Solar panels efficiency tends to decrease with the accumulation of dust on their surface. Thus, a cleaning process requires assigning and employing labor, which increases the cost of running as well as high cost of machinery. The current study focuses on assessing and designing a simple auto self-cleaning system in order to improve the efficiency of the solar panel. The results showed that for the Al-Khobar region, Eastern Province, Kingdom of Saudi Arabia, the efficiency of the solar panels after cleaning was increased from 6% to an average of 12% at nominal temperature... [more]

Low carbon emissions have a great importance in our life. The increasing importance of carbon emission levels have attracted the interests of researchers and academics in the field. In this article, a panel data econometric model is developed to measure the relationship between renewable energy, energy productivity, population, urbanization, motorization, and Gross Domestic Product (GDP) per capita and their impacts on carbon dioxide CO2 emissions. Data used in this study was collected from the European Statistical Office (EUROSTAT) and five statistical hypotheses were tested and validated through a multilinear regression model using the Econometric Views (Eviews) 10.0 statistical software. The Hausman test was used to choose between a model with fixed effects and a model with random effects, and the variance inflection factor (VIF) was used to test the collinearity between the independent variables. The author’s findings indicate that renewable energy at the European Union (EU) level... [more]

Computational Fluid Dynamics (CFD) has been firmly established as a fundamental discipline to advancing research on energy engineering. The major progresses achieved during the last two decades both on software modelling capabilities and hardware computing power have resulted in considerable and widespread CFD interest among scientist and engineers. Numerical modelling and simulation developments are increasingly contributing to the current state of the art in many energy engineering aspects, such as power generation, combustion, wind energy, concentrated solar power, hydro power, gas and steam turbines, fuel cells, and many others. This review intends to provide an overview of the CFD applications in energy and thermal engineering, as a presentation and background for the Special Issue “CFD Applications in Energy Engineering Research and Simulation” published by Processes in 2020. A brief introduction to the most significant reviews that have been published on the particular topics is... [more]

With exposure to real-time market pricing structures, consumers would be incentivized to invest in electrical energy storage systems and smart predictive automation of their home energy systems. Smart home automation through optimizing HVAC (heating, ventilation, and air conditioning) temperature set points, along with distributed energy storage, could be utilized in the process of optimizing the operation of the electric grid. Using electricity prices as decision variables to leverage electrical energy storage and flexible loads can be a valuable tool to optimize the performance of the power grid and reduce electricity costs both on the supply and demand sides. Energy demand prediction is important for proper allocation and utilization of the available resources. Manipulating energy prices to leverage storage and flexible loads through these demand prediction models is a novel idea that needs to be studied. In this paper, different models for proactive prediction of the energy demand... [more]

Even though wind energy is one of the most mature renewable technologies, it is in continuous development not only because of the trend towards larger wind turbines but also because of the development of new technological solutions. The gearbox is one of the components of the drive train in which the industry is concentrating more effort on research and development. Larger rotor blades lead to more demanding requirements for this component as a consequence of a higher mechanical torque and multiplication ratio (due to lower rotational speed of blades while the rotational speed on the generator side remains at similar values). In addition, operating conditions become increasingly demanding in terms of reliability, performance, and compactness. This paper analyses the different gearbox arrangements that are implemented by manufacturers of onshore wind turbines, as well as their market penetration (including different aspects that affect the design of the gearbox, such as drive train conf... [more]

In recent years, several tools and models have been developed and used for the design and analysis of future national energy systems. Many of these models focus on the integration of various renewable energy resources and the transformation of existing fossil-based energy systems into future sustainable energy systems. The models are diverse and often end up with different results and recommendations. This paper analyses this diversity of models and their implicit or explicit theoretical backgrounds. In particular, two archetypes are defined and compared. On the one hand, the prescriptive investment optimisation or optimal solutions approach. On the other hand the analytical simulation or alternatives assessment approach. Awareness of the dissimilar theoretical assumption behind the models clarifies differences between the models, explains dissimilarities in results, and provides a theoretical and methodological foundation for understanding and interpreting results from the two archety... [more]

In this paper, a renewable energy integration facility (REIF) with photovoltaic (PV) distributed generation resources for micro-grid applications is studied. In grid-tied operation, the PV system together with the grid supply the power to the local loads while the surplus energy is fed back to the grid. In stand-alone mode, a gas micro-turbine is operated as a master to establish the common AC bus voltage to which the PV inverters can synchronize The experimental results demonstrate the stable operation of the REIF under various generation and load conditions. The power quality can meet the IEEE Standard 1547. Furthermore, the responses of the REIF under different fault conditions are investigated. Relevant protection mechanisms are then developed, providing insights into the fault protection for the future grid.

This paper describes the detailed analysis of a reactor application for a power plant to mitigate the voltage rise of a distribution line (DL) caused by the connection of distributed resources (DRs). The maximum capacity of renewable energy generators (REGs) that meets the acceptable voltage rise of a DL and the necessary capacity of the reactor to mitigate that voltage rise according to the different types of REGs are analyzed. The re-coordination of a protection relay and the loss of generation revenue as well as the installation location of a reactor are described. Finally, the ON/OFF conditions of the reactor, such as the magnitudes of the grid voltage and generator voltage, and the duration time of the voltage rise are analyzed. As the voltage rise is mitigated and self-limited in small power plants, it is confirmed that the capacity of the DRs connected to the DL can be increased through a field demonstration.

In order to overcome process instability and buffer deficiency in the anaerobic digestion of mono food waste (FW), chemically enhanced primary sludge (CEPS) was selected as a co-substrate for FW treatment. In this study, batch tests were conducted to study the effects of CEPS/FW ratios on anaerobic co-digestion (coAD) performances. Both soluble chemical oxygen demand (SCOD) and protease activity were decreased, with the CEPS/FW mass ratio increasing from 0:5 to 5:0. However, it was also found that the accumulation of volatile fatty acids (VFAs) was eliminated by increasing the CEPS/FW ratio, and that corresponding VFAs concentrations decreased from 13,872.97 to 1789.98 mg chemical oxygen demand per L (mg COD/L). In addition, the maximum value of cumulative biogas yield (446.39 mL per g volatile solids removal (mL/g VSsremoval)) was observed at a CEPS/FW ratio of 4:1, and that the tendency of coenzyme F420 activity was similar to biogas production. The mechanism analysis indicated that... [more]

Fuel resource diversification is a global effort to deviate from non-renewable fossil fuels. Biomass has been identified as an alternative solid biofuel source due to its desirable properties and carbon neutrality. As reported in the literature, biomass can positively contribute towards combating climate change while providing alleviation for energy security issue. As part of efforts to diversify biomass resources, this work intends to explore the potential of Napier grass, one type of energy crop, for the production of renewable syngas via gasification. This energy crop is originally from Africa, which is highly productive with low cost (40 tonnes per year per hectare). Limited studies were conducted to analyze the potential of such an energy crop as a fuel source, which is the subject of this work. In order to analyze the full potential of such energy crop, the physical and chemical characteristics of this biomass was first analyzed. To determine the productivity of syngas from this... [more]

With about a 7% average annual economic growth rate in Vietnam, the demand for electricity production is increasing, and, with more than 3000 km of coastline, the country has great potential for developing wave energy sources to meet such electricity production. This energy source, also known as renewable energy, comes from tides, wind, heat differences, flows, and waves. Both wind and wave energy are considered to have the most potential for energy sources in Vietnam. Just as hydropower projects are controversial due to depleting water resources and regulating floods, nuclear power projects cause safety concerns. To overcome this problem, Vietnamese scientists are considering using abundant wave energy resources for electricity. Nowadays, the ocean energy sector offers many new technologies to help minimize carbon dioxide emissions (CO2) in the living environment. Further, many countries already have wave power plants. In this research, an integrated model, combining the fuzzy analyti... [more]

Due to environmental and economic drawbacks of fossil fuels, global renewable energy (RE) capacity has increased significantly over the last decade. Solar photovoltaic (PV) is one of the fastest-growing RE technologies. Selecting an appropriate site is one of the most critical steps in utility-scale solar PV planning. This paper aims at proposing a rational multi-criteria decision-making (MCDM) approach based on the Brown−Gibson model for optimal site selection for utility-scale solar PV projects. The proposed model considers the project’s net present value (NPV) along with seven suitability factors and six critical (constraint) factors. The RETScreen software was applied in calculating the NPV, the simple payback period and the carbon emission savings of the project at each alternative site. The weights of the suitability factors were determined using the analytical hierarchy process. Applied to the case study of finding the best location for a 5 MW solar PV project in northern Camero... [more]

Understanding the dynamic nexus between CO2 emissions and economic growth in the sustainable environment helps the economies in developing resources and formulating apposite energy policies. In the recent past, various studies have explored the nexus between CO2 emissions and economic growth. This study, however, investigates the nexus between renewable energy production, CO2 emissions, and economic growth over the period from 1995 to 2016 for seven Association of Southeast Asian Nations (ASEAN) countries. Fully Modified Ordinary Least Square (FMOLS) and Dynamic Ordinary Least Square (DOLS) methodologies were used to estimate the long- and short-run relationships. The panel results revealed that renewable energy production has a significant long term effect on CO2 emissions for Vietnam (t = −2.990), Thailand (t = −2.505), and Indonesia (t = −2.515), and economic growth impact for Malaysia (t = 2.050), Thailand (t = −2.001), and the Philippines (t = −2.710). It is, therefore, vital that... [more]

The widespread penetration of hydrogen in mainstream energy systems requires hydrogen production processes to be economically competent and environmentally efficient. Hydrogen, if produced efficiently, can play a pivotal role in decarbonizing the global energy systems. Therefore, this study develops a framework which evaluates hydrogen production processes and quantifies deficiencies for improvement. The framework integrates slack-based data envelopment analysis (DEA), with fuzzy analytical hierarchy process (FAHP) and fuzzy technique for order of preference by similarity to ideal solution (FTOPSIS). The proposed framework is applied to prioritize the most efficient and sustainable hydrogen production in Pakistan. Eleven hydrogen production alternatives were analyzed under five criteria, including capital cost, feedstock cost, O&M cost, hydrogen production, and CO2 emission. FAHP obtained the initial weights of criteria while FTOPSIS determined the ultimate weights of criteria for each... [more]

Industry 4.0 designates the recent digital revolution in the industrial sector, evolving from the comprehensive networking and automation of all the productive areas. Equipment, machinery, materials and products permit to (i) distinguish dealing out environmental settings and current status via sensors; (ii) join them through fixed software; and (iii) progress production procedures in an exclusive method. Additionally, Industry 4.0 exposes new trials to enterprises, especially small and medium-sized enterprises (SMEs). Firms should advance approaches to (i) achieve chances of innovation and digitalization; (ii) expand their processes; and (iii) define innovative business models. Based on these premises, a well-organized political, legal and infrastructural outline is essential to build up a business having an Industry 4.0 approach. Though bigger firms can get ahead through innovation processes and predicting the potential digitalization risks for their business models, SMEs may be in t... [more]

Linear wave energy converters generate intrinsically intermittent power with variable frequency and amplitude. A composite energy storage system consisting of batteries and super capacitors has been developed and controlled by buck-boost converters. The purpose of the composite energy storage system is to handle the fluctuations and intermittent characteristics of the renewable source, and hence provide a steady output power. Linear wave energy converters working in conjunction with a system composed of various energy storage devices, is considered as a microsystem, which can function in a stand-alone or a grid connected mode. Simulation results have shown that by applying a boost H-bridge and a composite energy storage system more power could be extracted from linear wave energy converters. Simulation results have shown that the super capacitors charge and discharge often to handle the frequent power fluctuations, and the batteries charge and discharge slowly for handling the intermit... [more]

Biodiesels are a renewable energy source, and they have the potential to be used as alternatives to diesel fuel. The aim of this study is to investigate the wear and friction characteristics of Australian native first generation and second generation biodiesels using a four-ball tribo tester. The biodiesel was produced through a two-step transesterification process and characterized according to the American Society for Testing and Materials (ASTM) standards. The tribological experiment was carried out at a constant 1800 rpm and different loads and temperatures. In addition, the surface morphology of the ball was tested by scanning electron microscope (SEM)/energy dispersive X-ray spectroscopy (EDX) analysis. The test results indicated that biodiesel fuels have a lower coefficient of frictions (COF) and lower wear scar diameter (WSD) up to 83.50% and 41.28%, respectively, compared to conventional diesel fuel. The worn surface area results showed that biodiesel fuel has a minimum percen... [more]

Thin-film solar cells enable a strong reduction of the amount of silicon needed to produce photovoltaic panels but their efficiency lowers. Placing metallic or dielectric nanoparticles over the silicon substrate increases the light trapping into the panel thanks to the plasmonic scattering from nanoparticles at the surface of the cell. The goal of this paper is to optimize the geometry of a thin-film solar cell with silver and silica nanoparticles in order to improve its efficiency, taking into account the amount of silver. An efficient evolutionary algorithm is applied to perform the optimization with a reduced computing time.

Recently, there has been a growing interest in the production of electricity from renewable energy sources (RES). The RES investment is characterized by uncertainty, which is long-term, costly and depends on feed-in tariff and support schemes. In this paper, we address the real option valuation (ROV) of a solar power plant investment. The real option framework is investigated. This framework considers the renewable certificate price and, further, the cost of delay between establishing and operating the solar power plant. The optimal time of launching the project and assessing the value of the deferred option are discussed. The new three-stage numerical methods are constructed, the Lobatto3C-Milstein (L3CM) methods. The numerical methods are integrated with the concept of Black⁻Scholes option pricing theory and applied in option valuation for solar energy investment with uncertainty. The numerical results of the L3CM, finite difference and Monte Carlo methods are compared to show the ef... [more]

Meeting the demand of energy is a challenge for many countries these days, and generating electricity from renewable resources has become a main trend for future economic development. The construction of a renewable energy plant is costly and timely; therefore, a good project management model is essential. In this paper, a fuzzy multiple objective linear programming (FMOLP) model is constructed based on program evaluation and review technique (PERT) first. With the consideration of the different degrees of importance of the multiple objectives, a fuzzy multiple weighted-objective linear programming (FMWOLP) model is constructed next. Through each proposed model, a compromise solution can be devised to maximize the total degree of satisfaction while considering multiple objectives. The results can provide references for the management on what activities and how long these activities should be crashed, how much the total project cost should be, and how long the total project duration tim... [more]

The main purpose of this paper is to analyze the energy production in the Maltese islands, focusing on the employment of renewable energies in order to increase their energy independence. The main renewable source here proposed is wave energy: thanks to a strategic position, Malta will be able to produce electrical energy using an innovative type of Wave Energy Converter (WEC) based on the prototype of a linear generator realized by University of Palermo. The use of this new technology will be able to cut down the electrical energy production from traditional power plants and, consequently, the greenhouse gas emissions (GHG). Wave energy source and off-shore photovoltaic (PV) technology are here proposed. Particularly, the installation of 12 wave farms, for a total installed capacity of 86 MW, will generate about 9.5% of Malta’s energy requirement in 2025, while the installation of 9.6 MW of off-shore PV will generate about 0.73%.