The well productivity of high-waxy reservoirs is highly influenced by temperature changes. A decrease in temperature can cause the precipitation of wax from the crude oil, leading to a decrease in the formation’s drainage capacity and a drop in oil production. In this study, the wax precipitation of crude oil is characterized by rheological properties tests and differential scanning calorimetry (DSC) thermal analysis. The wax damage characteristics of cores and the relative permeability curves at different temperatures were investigated through coreflood experiments. Furthermore, nanoemulsion is selected as a chemical agent for injection fluid. The nuclear magnetic resonance (NMR) scanning technique is used to investigate the effects of oil recovery enhancement at different pores by increasing temperature and adding nanoemulsion. By comparing the changes in T2 spectra and the distribution pattern of residual oil before and after liquid injection, the results have shown that both increa... [more]

At present, there have been a number of hydrogen storage tank explosions in hydrogen filling stations, causing casualties and property losses, and having a bad social impact. This has made people realize that the risk assessment and preventive maintenance of hydrogen storage tanks are crucial. Therefore, this paper innovatively proposes a comprehensive risk assessment model based on connection coefficient algorithms and quintuple subtractive set pair potential. First of all, the constructed index system contains five aspects of corrosion factors, material factors, environmental factors, institutional factors and human factors. Secondly, a combined weighting analysis method based on FAHP and CRITIC is proposed to determine the weight of each indicator. The basic indicators influencing hydrogen storage tanks are analyzed via the quintuple subtraction set pair potential and full partial connection coefficient. Finally, the risk level and development trend of hydrogen storage tanks in hydr... [more]

Bioglycerol is a major by-product of the biodiesel manufacturing process. Various chemical derivatives from bioglycerol would enhance its economic value. An antifreeze of glycerine acetate was chemically converted from an esterification reaction of bioglycerol with acetic acid. The photocatalyst TiO2/SO42− irradiated with ultraviolet light assisted the chemical conversion reaction. The molar ratio of acetic acid/bioglycerol was varied to obtain the optimum composition of the derived antifreeze product. Different cosolvents were considered to enhance the homogeneous extent between the antifreeze of glycerine acetate and biodiesel, and thus, the anti-freezing effect. The cosolvent/glycerine acetate, at various volumetric ratios from 0 to 0.25 vol.%, was blended into a commercial biodiesel. After 5 vol.% antifreeze of the glycerine acetate/cosolvent mixture of the biodiesel was added to the commercial biodiesel, the fuel properties of the biodiesel were analyzed. The effects of the cosolv... [more]

The impact of particle addition jets on the flow field in natural gas pipelines was investigated, and the structural information of the flow field at different flow velocities in a symmetric jet flow was analyzed via numerical simulation. The results of coherent structures in the high-pressure natural gas pipeline reveal vortex structures of varying sizes both upstream and downstream of the jet flow. To determine the spatial distribution of the main vortex structures in the flow field, proper orthogonal decomposition (POD) mode analysis was performed on the unsteady numerical results. Moreover, the detailed spatial characteristics of the coherent vortex structures represented by each mode were obtained. The results indicate that the large-scale vortex structures within the pipeline are balanced and stable, with their energy increasing as the jet flow velocity increases. Additionally, higher-order modes exhibit significant shedding of small-scale vortex structures downstream of the jet... [more]

Betulinic acid is a naturally occurring pentacyclic triterpene belonging to the lupane-group that exhibits a wide range of pharmacological activities. BA derivatives are continuously being researched due to their improved anticancer efficacy and bioavailability. The current research was conducted in order to determine the antiproliferative potential of three synthesized BA fatty esters using palmitic, stearic and butyric acids and their liposomal nanoformulations. The cytotoxic potential of BA fatty esters (Pal-BA, St-BA, But-BA) and their respective liposomal formulations (Pal-BA-Lip, St-BA-Lip, But-BA-Lip) has been assessed on HaCaT immortalized human keratinocytes and A375 human melanoma cells. Both the esters and their liposomes acted as cytotoxic agents against melanoma cells in a time- and dose-dependent manner. The butyryl ester But-BA outperformed BA in terms of cytotoxicity (IC50 60.77 μM) while the nanoformulations St-BA-Lip, But-BA-Lip and BA-Lip also displayed IC50 values (... [more]

Dry machining has gained significant importance in the last few years due to its promising contribution towards sustainability. This review study introduces dry machining, presents its benefits, and summarizes the recent technological developments that can facilitate dry machining. It aims to provide a concise overview of the current state of the art in dry machining to promote sustainability. This article synthesizes and emphasizes the useful information from the existing literature, and summarizes the methods and tools used to implement it. It also identifies some of the major problems and challenges and their potential solutions to make dry machining more viable and efficient. It concludes with some future research directions important for the scholars and researchers to establish the field further. From this review study, the major findings are: (1) tools with textures or patterns can enhance the cutting performance of dry machining for various materials, (2) tool coating is an eff... [more]

With the adjustment of energy structure, the utilization of hydrogen energy has been widely attended. China’s carbon neutrality targets make it urgent to change traditional coal-fired power generation. The paper investigates the combustion of pulverized coal blended with hydrogen to reduce carbon emissions. In terms of calorific value, the pulverized coal combustion with hydrogen at 1%, 5%, and 10% blending ratios is investigated. The results show that there is a significant reduction in CO2 concentration after hydrogen blending. The CO2 concentration (mole fraction) decreased from 15.6% to 13.6% for the 10% hydrogen blending condition compared to the non-hydrogen blending condition. The rapid combustion of hydrogen produces large amounts of heat in a short period, which helps the ignition of pulverized coal. However, as the proportion of hydrogen blending increases, the production of large amounts of H2O gives an overall lower temperature. On the other hand, the temperature distributi... [more]

Damage localization in GFRP (glass-fiber-reinforced polymer) composite plates is a crucial research area in marine engineering. This study introduces a feedback-based damage index (DI) combined with multi-label classification to enhance the accuracy of damage localization and address scenarios involving multiple damages. The research begins with the creation of a modal database for yachts’ GFRP composite plates using finite element modeling (FEM). A method for deriving a feedback-weighted matrix, based on the accuracy of the DI, is then developed. Sensitivity analysis reveals that the feedback DI is 50% more sensitive than the traditional DI, reducing false positives and missed detections. The associated feedback-weighted matrix depends solely on the structural shape, ensuring its transferability. To address the challenge for localizing multiple damages, a multi-label classification approach is proposed. The synergy between the feedback optimization and multi-label classification enabl... [more]

Hydraulic fracturing is one of the most important enhanced oil recovery technologies currently used to develop unconventional oil and gas reservoirs. During hydraulic fracture initiation, fluid seeps into the reservoir rocks surrounding the wellbore, inducing rock deformation and changes in the stress field. Analyzing the fluid−solid coupling mechanism around the wellbore is crucial to the construction design of fracturing technologies such as pulse fracturing and supercritical carbon dioxide fracturing. In this study, a new transient fluid−solid coupling model, capable of simulating the pore pressure field and effective stress field around the wellbore, was established based on the Biot consolidation theory combined with the finite difference method. The numerical results are in excellent agreement with the analytical solutions, indicating the reliability of the model and the stability of the computational approach. Using this model, the influence of seepage parameters and reservoir p... [more]

This article is devoted to the further development of a viable technology for low-temperature cryopreservation of reproductive cells of sturgeon fish using acoustic−mechanical fields and intelligent control of the freezing process. Before vitrification begins, the piezoactuator acts on a mixture of cryoprotectant and reproductive cells. This promotes intensive mixing of the cryoprotector and its diffusion through the cell membrane. When vitrification is carried out directly, a phase transition phenomenon is observed, accompanied by crystal formation. This article presents a new mathematical model describing this process as developed by the authors. The corresponding boundary conditions are formulated. Numerical experiments were carried out using the finite element method. It has been established that during vitrification without the use of a cryoprotectant, a sharp temperature jump is observed at the front of the crystalline formation boundary. The use of a cryoprotectant leads to a sl... [more]

Granite residual soil typically forms complex pore structures and exhibits high water sensitivity due to physical and chemical weathering processes. Changes in initial compaction conditions significantly affect the mechanical and hydraulic properties of in situ granite residual soil subgrades, with these variations fundamentally related to changes in pore structure and soil−water characteristics. This study investigates the pore structure and bimodal soil−water characteristic curve (SWCC) of a compacted granite residual soil through laboratory tests and mercury intrusion porosimetry tests. Nine initial conditions were selected based on potential in situ compaction conditions of subgrades, and their effects on the pore size distribution (PSD) and SWCC were thoroughly analyzed. The results show strong correlations between bimodal pore structure and SWCC. The size and volume of inter-aggregate pores exhibit noticeable changes with initial conditions, affecting SWCC within the low and midd... [more]

The shape and convexity are crucial quality assessment indicators for hot-rolled electrical steel strips. Besides bending rolls, shifting rolls, and the original roll profile, the thermal roll profile also plays a significant role in controlling the shape and convexity during the hot-rolling process. However, it is always overlooked due to its dynamic uncertainty. To solve this problem, it is necessary to achieve online cooling-status control for the local thermal expansion of rolls. Based on the existing structure of a mill, a pair of special partition-cooling beams with an intelligent cooling system was designed. For high efficiency and practicality, a new online predictive model was established for the dynamic temperature field of the hot-rolling process. An equivalent treatment was applied to the boundary condition corresponding to the practical cooling water flow. In addition, by establishing the corresponding target distribution curve for the partitioned water flow cooling, onlin... [more]

The occurrence of slope instability disasters seriously endangers the safety of people’s lives and property in China. Therefore, it is essential to study the slope instability process and the interaction between soil and retaining walls. In this paper, the smoothed-particle hydrodynamics (SPH) method, based on the elastoplastic constitutive model of rock and soil, was used to simulate the entire process of slope instability and the interaction between soil and retaining walls. The model, based on the classical elastic−plastic theory, includes linear elastic deformation and plastic deformation following the non-associated flow rule under the Drucker−Prager (DP) yield criterion. By considering the plastic characteristics of geotechnical materials, this method can accurately simulate the slope movement process. The model was established, calculated, and compared with a slope example, thus verifying its feasibility. Furthermore, the motion response of the retaining wall under different con... [more]

The moving bed heat exchanger (MBHE) has been widely applied in the recovery of waste heat of industrial particles. Currently, investigations focus on uniform-size particles in the MBHE, but few studies are conducted on multi-size particles produced by industrial granulation. Therefore, based on the discrete element method (DEM), the heat transmission model of multi-size particles is established, and flow and heat transmission processes of typically normal distribution particles in the MBHE are studied. In conclusion, there are significant differences in particles tangential velocity and contact number in local regions of a heat exchanger pipe, resulting in different local heat transmission coefficients. In addition, the increases in outlet particle velocity and inlet particle temperature significantly enhance the heat transmission. When the outlet particle velocity grows from 1 mm/s to 5 mm/s, the overall heat transmission coefficient increases by 36.4%, and as the inlet particle temp... [more]

The critical role of energy in contemporary life and the environmental challenges associated with its production imply the need for research and exploration of its novel resources. The present review paper emphasizes the continuous exploitation of non-renewable energy sources, suggesting the transition toward renewable energy sources, termed ‘green energy’, as a crucial step for sustainable development. The research methodology involves a comprehensive review of articles, statistical data analysis, and examination of databases. The main focus is biomass, a valuable resource for bioenergy and biopesticide production, highlighting not only its traditional diverse sources, such as agricultural waste and industrial residues, but also non-edible invasive alien plant species. This study explores the utilization of invasive alien species in circular economy practices, considering their role in bioenergy and biopesticide production. The potential conflict between bioproduct acquisition and foo... [more]

Optimization algorithms play a crucial role in a wide range of fields, from designing complex systems to solving mathematical and engineering problems. However, these algorithms frequently face major challenges, such as convergence to local optima, which limits their ability to find global, optimal solutions. To overcome these challenges, it has become imperative to explore more efficient approaches by incorporating chaotic maps within these original algorithms. Incorporating chaotic variables into the search process offers notable advantages, including the ability to avoid local minima, diversify the search, and accelerate convergence toward optimal solutions. In this study, we propose an improved Archimedean optimization algorithm called Chaotic_AO (CAO), based on the use of ten distinct chaotic maps to replace pseudorandom sequences in the three essential components of the classical Archimedean optimization algorithm: initialization, density and volume update, and position update. T... [more]

The cement strength between the cement and the formation is a key factor in determining the cementation sealing capacity. In the shale formation, due to the organic matter content, the cementing quality between the formation and the cement ring is poor, which affects the quality of cementing. It is easy to cause problems such as annulus pressure. To improve the quality of cementing, this paper investigates the effect of amino silane coupling agents, vinyl silane coupling agents and aluminium−zirconate coupling agents on the interface cementation of rock and cement under different conditions. Meanwhile, the effects of different coupling agent compounding on improving the cementation interface cement strength under different temperature and concentration conditions were investigated. This led to the development of a composite interface enhancer. The composite interface enhancer can improve the bond strength between cement and rock by 189.22%. A preflush fluid system was developed to effe... [more]

This paper proposes a new method for assessing the state of charge (SoC) and identifying the types of different lithium-ion cells used in the battery systems of light electric vehicles. A particular challenge in the development of this method was the SoC estimation time, as the method is intended for implementation in the control system of a bicycle charging station, where the state of charge must be determined immediately after the bicycle is plugged in in order to start the charging process as quickly as possible according to the appropriate charging algorithm. The method is based on the identification of the transfer function, i.e., the dynamic response of the battery voltage to the current pulse. In the learning phase of this method, a database of reference transfer functions and corresponding SoCs for a specific type of battery cell is created. The transfer functions are described by coefficients determined through the optimization procedure. The algorithm for estimating the unkno... [more]

Vehicle fuel leaks can adversely affect the performance of asphalt pavements. To study the mechanisms of fuel corrosion damage in asphalt, four asphalt binders were selected in this study, and the evolution of their rheological and microscopic properties was investigated. Fuel corrosion caused continuous mass loss in asphalt binders. Base asphalt lost more than 50% of its mass after 24 h of fuel corrosion, while modified asphalts had better resistance. According to dynamic shear rheometer tests and multiple stress creep recovery tests, modifiers improved the high-temperature rheological properties of these asphalt binders. As the degree of fuel corrosion deepened, the indexes characterizing the high-temperature performance deteriorated. Rubber-modified asphalt showed the best resistance to high-temperature deformation, while the performance of LDPE-modified asphalt was more stable. In contrast, fuel corrosion improved the resistance of asphalt binders to low-temperature cracking to som... [more]

In response to the urgent need to address climate change and reduce carbon emissions, there has been a growing interest in innovative approaches that integrate AI and CDR technology. This article provides a comprehensive review of the current state of research in this field and aims to highlight its potential implications with a clear focus on the integration of AI and CDR. Specifically, this paper outlines four main approaches for integrating AI and CDR: accurate carbon emissions assessment, optimized energy system configuration, real-time monitoring and scheduling of CDR facilities, and mutual benefits with mechanisms. By leveraging AI, researchers can demonstrate the positive impact of AI and CDR integration on the environment, economy, and energy efficiency. This paper also offers insights into future research directions and areas of focus to improve efficiency, reduce environmental impact, and enhance economic viability in the integration of AI and CDR technology. It suggests impr... [more]

The purpose of this article was to develop a method of analyzing the manufacturing process with variables indicating product competitiveness and technological capabilities in metric space as a cognitive source. The presented method will facilitate the identification of key development factors within the manufacturing processes that have the greatest impact on the adaptation of the manufacturing enterprise to Industry 4.0. The presented method of manufacturing process analysis integrates a number of tools (SMART method, brainstorming, BOST analysis, 3 × 3 metrics) that enable the implementation of statistical analysis. The model developed makes it possible to apply known mathematical methods in areas new to them (adaptation in the manufacturing area), which makes it possible to use scientific information in a new way. The versatility of the method allows it to be used in manufacturing companies to identify critical factors in manufacturing processes. A test of the developed method was c... [more]

Particle swarm optimization (PSO) has been extensively used to solve practical engineering problems, due to its efficient performance. Although PSO is simple and efficient, it still has the problem of premature convergence. In order to address this shortcoming, an adaptive particle swarm optimization with state-based learning strategy (APSO-SL) is put forward. In APSO-SL, the population distribution evaluation mechanism (PDEM) is used to evaluate the state of the whole population. In contrast to using iterations to just the population state, using the population spatial distribution is more intuitive and accurate. In PDEM, the population center position and best position for calculation are used for calculation, greatly reducing the algorithm’s computational complexity. In addition, an adaptive learning strategy (ALS) has been proposed to avoid the whole population’s premature convergence. In ALS, different learning strategies are adopted according to the population state to ensure the... [more]

The global shale gas resources are huge and have good development prospects, but shale is mainly composed of nanoscale pores, which have the characteristics of low porosity and low permeability. Horizontal drilling and volume fracturing techniques have become the effective means for developing the shale reservoirs. However, a large amount of mining data indicate that the fracturing fluid trapped in the reservoir will inevitably cause hydration interaction between water and rock. On the one hand, the intrusion of fracturing fluid into the formation causes cracks to expand, which is conducive to the formation of complex fracture networks; on the other hand, the intrusion of fracturing fluid into the formation causes the volume expansion of clay minerals, resulting in liquid-phase trap damage. At present, the determination of well closure time is mainly based on experience without theoretical guidance. Therefore, how to effectively play the positive role of shale hydration while minimizin... [more]

A new approach to determining the friabilin content of wheat grain was proposed. Electropherograms were taken, and the intensity of the friabilin bands was compared in the analyzed wheat cultivars and the cv. Chinese Spring. The friabilin content indicator was calculated in the grain of 17 common wheat cultivars, which differed mostly in their crude protein content and hardness index (HI). The basic properties of the kernels were measured in each wheat cultivar, and the correlations between the measured parameters and the friabilin content indicator were determined. In the analyzed wheat cultivars, the friabilin content indicator ranged from around 0.21 to around 0.77. This indicator was significantly correlated with the kernel length, thickness, mass, vitreousness, HI, and rupture force. The strongest correlation was observed between the friabilin content indicator and kernel length. An increase in the mean kernel length from around 5.4 mm to around 8.0 mm decreased the friabilin cont... [more]

The iron and steel industry is the leading industry supporting China’s industrial sector. Currently, there is less assessment work on green and low-carbon technologies for the iron and steel industry. This study clarifies the overall strategy of technology assessment by researching the relevant theories and methods of technology assessment. The study further establishes a scientific and reasonable comprehensive assessment index system of green and low-carbon technologies for the iron and steel industry from the aspects of technology index, economy and promotion, and application, including factors such as 11 indexes, the amount of energy saving, carbon dioxide emission reduction, and the resource recovery rate by utilising analytical and comprehensive methods and combining with the characteristics of the technologies. By analysing and comparing the advantages and disadvantages of the commonly used assessment methods, the entropy weighting method, grey correlation analysis method, and TO... [more]