Phenolic pollutants in industrial wastewater are considered to be harmful aromatic compounds. With the development of industry and pharmaceuticals, phenolic pollutants and their derivatives have gradually started to affect people’s daily lives. Therefore, it is necessary to strictly control the content of phenolic pollutants in industrial wastewater, not only for the natural environment but also for human life. The research optimized the existing treatment methods for classified pollutants, and successfully prepared a heterogeneous photo-Fenton catalyst Fe3O4@B-rGO (9.3%). The characterization results of the catalyst showed that the synthesis of the catalyst was successful, and its specific surface area was 11.28 (m2/g), and the pore volume area was 0.137 (m3/g), respectively, which were larger than those of the other two comparative catalysts. In addition, the research conclusion also showed that the catalyst prepared during the research had good catalytic activity, the treatment effi... [more]

Soil and groundwater systems have natural attenuation potential to degrade or detoxify contaminants due to biogeochemical processes. However, such potential is rarely incorporated into active remediation strategies, leading to over-remediation at many remediation sites. Here, we propose a framework for designing and searching optimal remediation strategies that fully consider the combined effects of active remediation strategies and natural attenuation potentials. The framework integrates machine-learning and process-based models for expediting the optimization process with its applicability demonstrated at a field site contaminated with arsenic (As). The process-based model was employed in the framework to simulate the evolution of As concentrations by integrating geochemical and biogeochemical processes in soil and groundwater systems under various scenarios of remedial activities. The simulation results of As concentration evolution, remedial activities, and associated remediation c... [more]

Since the beginning of the 21st century, agility and sustainability have played a significant role in the global manufacturing industry. The manufacturing paradigm leaning toward green procurement and organizational agility has crossed all levels of sustainability by colossally influencing the firms’ sustainable practices, innovation capacity, and eco-friendly procurements. Integrating sustainable practices in manufacturing is a complex task that demands that global economies conduct comprehensive research on the factors influencing the firms’ sustainable practices. Therefore, the study considers empirical research between organizational agility and sustainable manufacturing practices. The data was collected from 461 respondents working in the manufacturing sector by applying a convenience sampling technique. We utilized structural equation modeling (SEM) for direct and indirect hypothesis testing. The study results revealed that operational, customer, and partnering agility significan... [more]

The antibiotic azithromycin (AZM) is one of the most persistent in the environment, with potential to cause serious health and environmental problems. As some polluting discharges containing this antibiotic can reach the soil, it is clearly relevant determining the ability of soils with different characteristics to retain it. In this research, AZM adsorption and desorption were studied for a variety of soils, using batch-type experiments. The results show that, at low doses of antibiotic added (less than or equal to 50 µmol L−1), the adsorption always reached 100%, while when higher concentrations were added (between 200 and 600 µmol L−1) the highest adsorption corresponded to soils with higher pH values. Adsorption data were fitted to the Linear, Langmuir and Freundlich models, with the latter showing the best fit, in view of the determination coefficient. No desorption was detected, indicating that AZM is strongly adsorbed to the soils evaluated, suggesting that the risks of environm... [more]

The uneven pore water distribution in unsaturated soil will cause water movement, change the hydraulic and mechanical characteristics of soil, and then cause soil damage. Therefore, it is important to study the hydraulic characteristics of unsaturated soil. In this paper, the law of conservation of mass and Darcy’s law were used to analyze the unit soil after seepage to obtain a continuous equation. Combined with the soil-water characteristic curve (SWCC), the effect of matric suction and permeability coefficient of unsaturated soil on infiltration rate is substituted into the equation. Through the analysis of pore water stress of the unit soil, the function of the unsaturated permeability coefficient with the effective saturation degree is obtained, and the theoretical formula of the one-dimensional infiltration rate of unsaturated soil is derived. Compared with other models, this formula has fewer parameters and is easy to use.

Nitrate is an important component of PM2.5, and its dry deposition and wet deposition can have an impact on ecosystems. Nitrate in the atmosphere is mainly transformed by nitrogen oxides (NOX = NO + NO2) through a number of photochemical processes. For effective management of the atmosphere’s environment, it is crucial to understand the sources of atmospheric NOX and the processes that produce atmospheric nitrate. The stable isotope method is an effective analytical method for exploring the sources of NO3− in the atmosphere. This study discusses the range and causes of δ15N data from various sources of NOX emissions, provides the concepts of stable isotope techniques applied to NOX traceability, and introduces the use of Bayesian mixture models for the investigation of NOX sources. The combined application of δ15N and δ18O to determine the pathways of nitrate formation is summarized, and the contribution of Δ17O to the atmospheric nitrate formation pathway and the progress of combining... [more]

Temperature is one of the most important parameters in the combustion processes. Accurate surface temperature can help to gain insight into the combustion characteristics of various solid or liquid fuels, as well as to evaluate the operating status of combustion power facilities such as internal combustion engines and gas turbines. This paper mainly summarizes and compares the main surface thermometry techniques, from the aspects of their principles, current state of development, and specific applications. These techniques are divided into two categories: contact-based thermometry and non-intrusive thermometry. In contact-based thermometry, conventional thermocouples as well as thin-film thermocouples are introduced. These methods have been developed for a long time and are simple and economical. However, such methods have disadvantages such as interference to flow and temperature field and poor dynamic performance. Furthermore, this paper reviews the latest non-intrusive thermometry m... [more]

This study aimed to isolate, purify, and identify some bacteria from different sources known to be contaminated with pesticides and evaluate their ability to degrade two important pesticides, chlorantraniliprole (CAP), and flubendiamide (FBD). In our study, six isolates showed maximum growth in the presence of CAP and FBD in the growth media as a sole carbon source. The isolates were purified and then identified by biochemical and morphological tests, MALD-TOF-MS, and 16S rRNA techniques, as Bacillus subtilis subsp. subtilis AZFS3, Bacillus pumilus AZFS5, Bacillus mojavensis AZFS15, Bacillus paramycoides AZFS18, Pseudomonas aeruginosa KZFS4, and Alcaligenes aquatilis KZFS11. The degradation ability of studied bacterial strains against pesticides was estimated under different conditions (temperatures, pH, salt, and incubation time). The results reveal that the optimal conditions for all bacterial strains’ growth were 30−35 °C, pH 7.0, 0.0−0.5% NaCl, and an incubation period of 11 days a... [more]

Municipal solid waste treatment and disposal have become one of the major concerns in waste management due to the excessive production of waste and higher levels of pollution. To address these challenges and protect the environment in sustainable ways, the hydrothermal pretreatment (HTP) technique coupled with anaerobic digestion (AD) becomes a preferred alternative technology that can be used for municipal solid waste stabilization and the production of renewable energy. However, the impact of HTP parameters such as temperature, retention time, pH, and solid content on the fermentation of TWAS is yet to be well studied and analyzed. Hence this study was conducted to review the effect of hydrothermal pretreatment of thickened waste-activated sludge (TWAS) on fermentation and anaerobic digestion processes. Many studies reported that fermentation of TWAS at pretreatment temperature ranges from 160 °C to 180 °C resulted in a 50% increase in volatile fatty acid (VFA) yields compared to no... [more]

With the rapid adoption of green infrastructure and nature-based solutions for a low-impact development, much consideration is given to ecosystem services and the ecological enhancement in modern planning of urban spaces. Artificial landscape water bodies have, in recent years, been utilized to enhance the ecological quality of urban environments. As an environmentally friendly measure, the water source of these waters has predominantly been adopting reclaimed water (treated wastewater). As a result, landscape water bodies are often eutrophic, exhibiting poor hydrodynamics, with lengthy water change cycles, creating the ideal environment for algal blooms that negatively impact the aesthetic appeal of these landscape waters. Based on the existing literature, this paper summarizes the treatment techniques and strategies employed in enhancing the quality of urban artificial landscape water bodies and providing integrated design solutions in the urban environment.

A 2020 investigation into air quality in urban areas found that nitrogen oxide and PM10 concentrations were above average. With the exception of summer, three seasons were found to have the highest nitrogen oxide concentrations, with a significant decrease during COVID-19. The significant PM10 relationship showed how communication affects the worsening of air quality, especially in the winter. The highest concentration of nitrogen oxide of 53.99 µg m−3 indicated the possibility of advection of pollutants from outside the agglomeration. The highest level of nitrogen oxide content, 95.95 µg m−3 in the atmospheric air, confirmed the significant presence of pollutants of communication origin. The advancement of electro-mobility and the application of cutting-edge technologies alongside renewable energy sources may contribute to a decrease in the amount of harmful substances released into the atmosphere.

The poultry meat industry generates about 60 million tons of waste annually. However, such waste can serve as a cheap material source for sustainable liquid fertilizers or biostimulant production. Moreover, its practical potential associated with the circular economy is evident. One of the options for waste feather reprocessing is to use a hydrolysis process, whose operating parameters vary depending on the waste material used. The better the quality of the waste feathers, the less energy is needed; moreover, a higher yield of amino acids and peptides can be achieved. These are the main operational parameters that influence the overall environmental and economic performance of the hydrolysis process. The assessment of process operational environmental aspects confirmed that the environmental impacts of hydrolysate production are highly dependent on the amount of electricity required and its sources. This fact influences the midpoint and the endpoint impacts on the observed environmenta... [more]

Nowadays, oil pollution is one of the main environmental problems. The current methods for recovering spills mainly involve chemical agents, but scientific research has focused on more natural and less harmful techniques for the environment, including a consortium of bacteria and microalgae to clean up water contaminated by hydrocarbons. The purpose of this preliminary study was to evaluate the ability of a microalga belonging to Chlorophyceae to grow in the presence of crude oil and remove the principal contaminants. H. pluvialis, which is usually used for nutraceutical purposes, thanks to the production of astaxanthin, was able to grow in anaerobic conditions, varying its metabolism from autotrophic to heterotrophic, exploiting the carbon present in the solution deriving from the presence of 1% of crude oil. Furthermore, the results of bioremediation showed a relevant reduction in chemical pollutants such as nitrate, fluoride, sulfate, and phosphate. The most important aspect of the... [more]

Most of the onshore water-flooding oilfield reservoirs have dominant seepage channels dominated by large pores and fractures, resulting in the oilfield being in a period of high water cut. The treatment of this problem needs to be solved by plugging. In the research process, the particle size and suspension of the water-swellable rubber particles were measured, and the effective time of the particles was evaluated; matching relationship. The results show that adding 2000 mg/L polymer to the water-swellable rubber particles can better improve the suspension performance; the performance of the polymer solution will not be affected during mixing and injection. In addition to strong swelling performance, it also has a certain strength and deformability, up to 10 MPa high via pressure and good thermal stability. Compared with the water and oil environment, the chemical degradation phenomenon is significant after soaking in alkaline conditions. Compared with the alkaline environment and the... [more]

Air pollution is accountable for various long-term and short-term respiratory diseases and even deaths. Air pollution is normally associated with a decreasing life expectancy. Governments have been implementing strategies to improve air quality. However, natural events have always played an important role in the concentration of air pollutants. In Australia, the lockdown period followed the Black Summer of 2019−2020 and coincided with the season of prescribed burns. This paper investigates the changes in the concentration of criteria pollutants such as particulate matter, nitrogen dioxide, ozone, and sulphur dioxide. The air quality data for the lockdown period in 2020 was compared with the pre-lockdown period in 2020 and with corresponding periods of previous years from 2016 to 2019. The results were also compared with the post-lockdown scenario of 2020 and 2021 to understand how the concentration levels changed due to behavioural changes and a lack of background events. The results r... [more]

The Earth’s magnetic field is one of the basic abiotic factors in all environments, and organisms had to adapt to it during evolution. On some occasions, organisms can be confronted with a significant reduction in a magnetic field, termed a “hypomagnetic field—HMF”, for example, in buildings with steel reinforcement or during interplanetary flight. However, the effects of HMFs on living organisms are still largely unclear. Experimental studies have mostly focused on the human and rodent models. Due to the small number of publications, the effects of HMFs are mostly random, although we detected some similarities. Likely, HMFs can modify cell signalling by affecting the contents of ions (e.g., calcium) or the ROS level, which participate in cell signal transduction. Additionally, HMFs have different effects on the growth or functions of organ systems in different organisms, but negative effects on embryonal development have been shown. Embryonal development is strictly regulated to avoid... [more]

This study was conducted in a fluidized-bed incineration plant, evaluating the formation, emission and flux of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from industrial-organic-solid-waste (IW) incineration. The results revealed that both the total (or I-TEQ) concentrations of toxic and 136 total PCDD/Fs in flue gas (FG), fly ash (FA) and bottom ash (BA)were ramped up to a higher level than those during municipal-solid-waste (MSW) incineration. A possible explanation was the chlorine (Cl) content of IW. However, the emitted PCDD/Fs in FG (FA/BA) still fulfilled the criteria. Subsequently, similar distribution patterns of PCDD/F isomers were observed in subsystems, indicating a unified formation-pathway. De novo synthesis was detected as the dominant formation-pathway of PCDD/Fs, while high-temperature and precursor syntheses were excluded. DD/DF chlorination formed PCDD/Fs to some extent. Furthermore, the mass flow chart indicated that PCDD/Fs output in primary FG w... [more]

Several chemicals, such as pesticides and heavy metals, are frequently encountered together in environment matrices, becoming a priority concerning the prevention of their emissions, as well as their removal from the environment. In this sense, this work aimed to evaluate the effectiveness of a permeable biosorbent bio-barrier reactor (PBR) on the removal of atrazine and heavy metals (copper and zinc) from aqueous solutions. The permeable bio-barrier was built with a bacterial biofilm of R. viscosum supported on 13X zeolite. One of the aims of this work is the investigation of the toxic effects of atrazine, copper and zinc on the bacterial growth, as well as the assessment of their ability to adapt to repeated exposure to contaminants and to degrade atrazine. The growth of R. viscosum was not affected by concentrations of atrazine bellow 7 mg/L. However, copper and zinc in binary solutions were able to inhibit the growth of bacteria for all the concentrations tested (5 to 40 mg/L). The... [more]

This paper studies the potential of carbon-abatement cost-sharing contracts in optimizing the joint economic−environmental benefit of a green supply chain. One-way and two-way cost-sharing contracts were investigated, respectively, in scenarios in which a capital-constrained manufacturer has a dominant downstream retailer or a dominant upstream supplier. The manufacturer obtains financing from a competitively priced bank to fulfill its production, carbon-abatement investment, and even insufficient emission permit purchase given the fact that the cap-and-trade regulation exists. Results show that in both one-way and two-way cost-sharing cases, cost sharing of carbon abatement has no effect on the manufacturer’s output or its counterparty’s wholesale price decisions; however, it improves the carbon abatement level of the supply chain. As a result, such cost-sharing of carbon abatement is proven to hamper the profit of the overall supply chain, but it improves the joint “economic-environm... [more]

The hormetic effect is a toxicological phenomenon in the soil ecosystem. The influence of low-molecular-weight organic acids (LMWOAs) on the release and activation of soil phosphorus (P) has become the focus of toxicological research. To what extent LMWOAs can regulate the hormetic effect of P release and then influence soil P nutrients is worth attention. This study aimed to investigate the effects of different types and concentrations of exogenous LMWOAs on P extraction, establish the relationship between the concentration of LMWOAs and P extraction efficiency, and calculate the hormetic parameters to understand the mechanism of types and concentrations of LMWOAs in P extraction efficiency. Four organic acids, i.e., citric, oxalic, tartaric, and malic acids, induced hormetic effects on P extraction that were concentration dependent. The relationship between LMWOAs and P extraction efficiency was explained by a quadratic polynomial equation. The critical threshold of citric acid conce... [more]

This paper provides a brief review on wastewater treatment system and the application of life cycle assessment (LCA) for assessing its environmental performance. An extensive review regarding the geographical relevance of LCA for WWTPs, and the evaluation of sustainable wastewater treatment by LCA in both developed and developing countries are also discussed. The objective of the review is to identify knowledge gap, for the improvement of the LCA application and methodology to WWTPs. A total of 35 published articles related to wastewater treatment (WWT) and LCA from international scientific journals were studied thoroughly and summarised from 2006 to 2022. This review found that there is lack of studies concerning LCA of WWTPs that consider specific local criteria especially in the developing countries. Thus, it is important to: (1) assess the influence of seasonality (i.e., dry and wet seasons) on the environmental impact of WWT, (2) investigate environmental impacts from WWTPs in dev... [more]

Due to the adverse effects of hexavalent chromium (Cr6+) on human health and the quality of the environment, the scientific community has invested a lot of effort to solve this pollution problem. Thus, implementing sustainable alternatives for Cr6+ elimination by exploiting the capacity of microbial biomass to retain heavy metals by biosorption is considered an economic and eco-friendly solution, compared to the conventional physico-chemical processes. However, the ability of microorganisms to remove Cr6+ from liquid effluents can strongly be affected by biotic and abiotic factors. With these issues in mind, the main purpose of this paper was to investigate Cr6+ biosorption on Bacillus megaterium and Rhodotorula sp. biomass inactivated by thermal treatments, exploring the effects of some factors such as: pH, biosorbent dose, initial concentration of the metal in solution, temperature and contact time between the biosorbent and the metal ions on process effectiveness. The results showed... [more]

In order to solve the corrosion problem of production string in the process of acidizing for the purpose of production, a new water-based annular protective fluid suitable for HTHP acid gas, including H2S-CO2 wells, was developed. Firstly, an appropriate deoxidizer, bactericide, and corrosion inhibitor shall be selected according to the production string of acid gas. In addition, the synergism between additives is evaluated. Then, by designing the additive ratio, the optimal formulation of the water-based annular protective fluid is determined. Finally, a high-temperature autoclave was used to evaluate the protective performance of the water-based annular protective liquid. The results showed that it is recommended to use water-based annular protective liquids prepared with clear water that comes easily from nature (rivers, etc.), which consist of a corrosion inhibitor, CT2-19C (30,000 ppm), BN-45 bactericide (2 g/L), and anhydrous sodium sulfite (3 g/L). The density of the water-based... [more]

Compared with conventional reactors that are designed by traditional micromachining technology, the use of 3D-printing technology to manufacture multichannel large-volume microchannel reactors as reaction equipment to remove low-concentration NOX by the wet method is simple and convenient, and the processing cost is low. The results showed that when the concentration of NO was 400 ppm, the mixed solution of (NH2)2CO mass fraction of 3% and H2O2 concentration of 0.5 mol/L was used, and the flow rates of gas and liquid were 100 mL/min, respectively, under the experimental conditions of pH = 11, solution temperature of 20 °C and 500 mL solution recycling for 20 min, the best removal effect of NOX was achieved, and the removal efficiency was 100%. When the O2 content in the flue gas was increased and the number and length of microchannels were increased, the NOX removal efficiency increased accordingly, which was conducive to the rapid and efficient reaction. The application of the microch... [more]

With the development of the social economy, the population has increased sharply, and the land area involved in people’s production and life is also gradually increasing [...]