Although supported bimetallic nanoparticles (Au-Pd NPs) demonstrate outstanding efficiency, challenges appear for carbon supported small and stable bimetallic nanoparticles used in liquid-phase reactions. In this work, Au-Pd NPs were supported on two types of carbon nanotubes: CNTs decorated covalently with carboxylic acid groups (O-CNTs) and non-covalently with the conductive poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) polymer (P-CNTs). The Au-Pd NPs were prepared using the sol immobilization approach on the functionalized CNTs, and the effect of the utilized functionalization method on the properties of the immobilized metallic nanoparticles and the performance of the nanocomposite catalysts was investigated. The fabricated nanocomposites were characterized using Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). The catalytic performance of Au-Pd/O... [more]

In recent years, the tribology field has expanded with the advent of nanolubrication. Nanolubricants are the name given to the dispersion of nanoparticles in a base oil, and has attracted researchers due to its potential application. In addition to being used in the tribology field, nanoparticles are also used for medical, space, and composites purposes. The addition of nanoparticles in base oils is promising because it enhances specific tribological characteristics including wear-resistance and friction, and the most important reason is that the majority of them are environmentally friendly. This paper reviews the tribological effect of various nanoparticles as lubricant additives. Parameters of nanoparticles that affect tribological performance, the technique to enhance stability, and lubrication mechanism that is currently believed to function will be delineated in detail. Moreover, this review facilitates an understanding of the role of various nanoparticles, which helps in develop... [more]

Bi, a group 15 element, was added to magnesium alloys and applied to seawater batteries in marine operating machinery to improve the electrochemical performance and corrosion resistance of the battery. The electrochemical properties of as-cast pure Mg, Mg−8Al, and Mg−8Al−xBi alloy anodes in 3.5% NaCl solution were researched. Electrochemical impedance spectroscopy and an immersion test in 3.5% NaCl solution show that the Mg−8%Al−0.4%Bi alloy provides better corrosion resistance than Mg and the Mg−8Al alloy. The galvanostatic discharge results show that the Mg−8%Al−0.4%Bi alloy revealed better electrochemical properties and utilization efficiency in 3.5% NaCl solution. The Mg17Al12 and BiOCl phases formed during the discharge process of the Mg−8%Al−0.4%Bi alloy play an important role in improving the electrochemical performance and utilization efficiency of the alloy.

The manufacture of semiconductor materials containing gallium and indium requires the separation of these metals owing to their coexistence in the resources of these materials. In this work, solvent extraction of In(III) and Ga(III) from a hydrochloric acid solution by ionic liquids (ILs) was investigated to separate them. The ILs were synthesized by reacting organophosphorus acids (Cyanex 272, PC88A and D2EHPA) and Aliquat 336 (ALi-CY, ALi-PC, and ALi-D2). In(III) was selectively extracted over Ga(III) by the ILs in the range of initial pH from 0.1 to 2.0. The equilibrium pH was always higher than the initial pH because of the coextraction of hydrogen ions. The highest separation factor between In(III) and Ga(III) was 87, which was obtained by ALi-PC at an initial pH of 1.0. Stripping of the loaded ALi-PC with hydrochloric and sulfuric acid led to selective stripping of In(III) over Ga(III). Scrubbing of the loaded ALi-PC with pure In(III) solution was not effective in removing the sm... [more]

The time-dependent deformation of porous (La0.6Sr0.4)0.95Co0.2Fe0.8O3-δ (LSCF) under constant uniaxial compressive stress at room temperature has been studied. Both axial and lateral stress−strain deformation curves clearly show the non-linear ferroelastic behavior of LSCF perovskite during compression. The ferroelastic characteristics of deformation curves such as coercive stress and apparent loading moduli decrease when the porosity of the samples increases. Ferroelastic creep deformations at applied stresses of 25 and 50 MPa demonstrate that stress and porosity are influencing factors on creep deformation, which increases with increasing stress and porosity. A negative creep or axial expansion and lateral contraction were observed in the sample with 35% porosity under 50-MPa constant compression stress.

Wastewater from a cosmetic factory, with an initial total organic carbon (TOC) of 146.4 mg/L, was treated with Fe2O3/Fe0/H2O2, Fe3O4/Fe0/H2O2, light/Fe2O3/Fe0/H2O2, and light/Fe3O4/Fe0/H2O2 processes. The light-supported processes were more effective than the lightless processes. The fastest TOC removal was observed during the first 15 min of the process. Out of the four tested kinetic models, the best fit was obtained for the modified second-order reaction with respect to the TOC value. The best treatment efficiency was obtained for the light/Fe3O4/Fe0/H2O2 process with 250/750 mg/L Fe3O4/Fe0 reagent doses, a 1:1 hydrogen peroxide to Chemical Oxygen Demand (H2O2/COD) mass ratio, and a 120 min process time. These conditions allowed 75.7% TOC removal to a final TOC of 35.52 mg/L and 90.5% total nitrogen removal to a final content of 4.9 mg/L. The five-day Biochemical Oxygen Demand to Chemical Oxygen Demand (BOD5/COD) ratio was increased slightly from 0.124 to 0.161. Application of Head... [more]

A large number of methodologies for fabrication of 1D carbon nanomaterials have been developed in the past few years and are extensively described in the literature. However, for many applications, and in particular in catalysis, a translation of the materials to a macro-structured form is often required towards their use in practical operation conditions. This review intends to describe the available methods currently used for fabrication of such macro-structures, either already applied or with potential for application in the fabrication of macro-structured catalysts containing 1D carbon nanomaterials. A review of the processing methods used in the fabrication of macrostructures containing 1D sp2 hybridized carbon nanomaterials is presented. The carbon nanomaterials here discussed include single- and multi-walled carbon nanotubes, and several types of carbon nanofibers (fishbone, platelet, stacked cup, etc.). As the processing methods used in the fabrication of the macrostructures ar... [more]

Relating the macroscopic properties of porous media such as capillary pressure with saturation is an on-going problem in many fields, but examining their correlations with microstructural traits of the porous medium is a challenging task due to the heterogeneity of the solid matrix and the limitations of laboratory instruments. Considering a capillarity-controlled invasion percolation process, we examined the macroscopic properties as functions of matrix saturation and pore structure by applying the throat and pore network model. We obtained a relationship of the capillary pressure with the effective saturation from systematic pore network simulations. Then, we revisited and identified the microstructure parameters in the Brooks and Corey capillary pressure model. The wetting phase residual saturation is related to the ratio of standard deviation to the mean radius, the ratio of pore radius to the throat length, and pore connectivity. The size distribution index in the Brooks and Corey... [more]

Mercury is a toxic and noxious element and is the only metal that naturally occurs as gas. One of the most challenging topics (included in the United Nations Minimata convention) is to understand the adsorption−release processes of manmade materials (e.g., concrete, bricks, tiles, painting). Adsorption of Hg by construction and demolition waste materials has recently been studied, but investigations on how much Hg0 can be released from these products are rather poor. The abandoned mining site of Abbadia San Salvatore (Siena, central Italy) where, for about one century, cinnabar was roasted to produce liquid mercury, is known for the high concentrations of (i) Hg0 in edifices and structures and (ii) total and leachate Hg in synthetic materials. In the present paper, a new, simple and low-cost method to measure the amount of GEM (Gaseous Elemental Mercury) released from anthropic materials (concrete, wall rocks, and tiles) located in the Hg0-rich environments of the former mining site, i... [more]

Experimental and simulation studies for carbon dioxide (CO2) adsorption on porous silica glass were performed to reveal how surface heterogeneity can affect the adsorption mechanism of CO2. In performing the simulation, the structure of porous silica glass was modeled as a slit pore consisting of parallel walls of connected SiO4 units. The adsorption isotherms of CO2 at 283 K were generated for a series of pore widths using a Monte Carlo ensemble. The defective surfaces created by random removal of surface atoms and the surfaces containing hydroxyl functional groups were chosen to represent the surface heterogeneity for the simulation tasks. The isotherms derived for the defective surfaces showed a rapid adsorption at low pressures because of the stronger interaction between the rough nonuniform surfaces and CO2 molecules. For the role of surface functional groups, the adsorption isotherms dramatically increased with an increasing number of functional groups. The amount of CO2 adsorbed... [more]

DPRA (direct peptide reactivity assay) and ADRA (amino acid derivative reactivity assay), which are based on the biological events of skin sensitization, were developed as alternatives to the controversial animal experiments. These assays are described in the OECD (Organization for Economic Co-operation and Development) guideline, Test No. 442C. Although these assays have been endorsed by the industries and internationally accepted as promising and effective tests for in vitro skin sensitization, they suffer from several drawbacks, such as incompatibility with hydrophobic chemicals and complicated sample processing. Here, we demonstrated a chromophore-based solid phase peptide reaction assay in vitro using peptides immobilized on magnetic beads (C-SPRA-MB). We successfully synthesized lysine (Lys) and cysteine (Cys) immobilized on magnetic microbeads. However, Cys immobilized magnetic microbeads showed gradual decomposition of the magnetic beads due to SH oxidation. Using Lys immobiliz... [more]

Lead-acid battery (LAB) weight is a major downside stopping it from being adapted to electric/hybrid vehicles. Lead grids constitute up to 50% of LAB electrode’s weight and it only ensures electric connection to electrochemically active material and provides structural integrity. Using graphite felt (GF) as a current collector can reduce the electrode’s weight while increasing the surface area. Modification of GF with lead (II) oxide using impregnation and calcination techniques and lead (II) formate and acetate as precursors was conducted to produce composite electrodes. It was found that lead (II) formate is not a viable material for this purpose, whereas multiple impregnation in lead (II) acetate saturated solution and calcination in air leads to thermal destruction GF. However, impregnation and calcination under nitrogen atmosphere in three cycles produced a sample of good quality with a mass loading of lead (II) oxide that was 17.18 g g−1 GF. This equates to only 5.5% of the total... [more]

The natural mineral, weathered sand of basalt (WSB), was utilized to investigate whether nickel can be removed. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis were performed to characterize WSB. The effects of various conditions, i.e., contact time, pH, WSB dosage, particle size of WSB, and temperature were analyzed. The experimental data were analyzed by two widely used equations, i.e., Langmuir and Freundlich isotherms. The results obtained revealed that the WSB adsorption process was more consistent with the Langmuir model than the Freundlich equation. The kinetics data fitted well into the pseudo-second-order model. The findings of the present study indicate that WSB could be used for removing nickel from aqueous solution. Moreover, its concentration can be reduced from 1.0 mg/L to ND (not detected, below the device limit <0.01 μg/L) under the optimal condition. Therefore, WSB is considered to be usable as one of the adsorbents for nickel removal in wate... [more]

Porous structures are naturally involved in electrochemical processes. The specific architectures of the available porous materials, as well as their physical properties, crucially affect their applications, e.g., their use in fuel cells, batteries, or electrolysers. A key point is the correlation of transport properties (mass, heat, and charges) in the spatially—and in certain cases also temporally—distributed pore structure. In this paper, we use mathematical modeling to investigate the impact of the pore structure on the distribution of wetting and non-wetting phases in porous transport layers used in water electrolysis. We present and discuss the potential of pore network models and an upscaling strategy for the simulation of the saturation of the pore space with liquid and gas, as well as the computation of the relative permeabilities and oxygen dissolution and diffusion. It is studied how a change of structure, i.e., the spatial grading of the pore size distribution and porosity,... [more]

The presented paper is focused on studying electrically conductive composites based on an elastomeric matrix and expanded graphite as the filler. A potential application as an environmental remote detector was studied. The influence of filler particle size, film thickness, detector length, temperature, and the amount of oil on the detector response rate were explored. Peel tests were performed in order to investigate the adhesion of prepared detector films to different materials. Expanded graphite with average particle size 5 µm was chosen for the experiments due to its fastest response. Decreasing the detector film thickness has caused an increase in the response rate but also a decrease in the signal measured. The response rate of the detector system was in a practical range even for lower temperatures. From the obtained data, the proposed detector seems to be suitable for a practical application.

There is growing interest in using pyrite minerals (FeS2) to enhance the efficiency of metallic iron (Fe0) for water treatment (Fe0/H2O systems). This approach contradicts the thermodynamic predicting suppression of FeS2 oxidation by Fe0 addition. Available results are rooted in time series correlations between aqueous and solid phases based on data collected under various operational conditions. Herein, the methylene blue method (MB method) is used to clarify the controversy. The MB method exploits the differential adsorptive affinity of MB onto sand and sand coated with iron corrosion products to assess the extent of Fe0 corrosion in Fe0/H2O systems. The effects of the addition of various amounts of FeS2 to a Fe0/sand mixture (FeS2 method) on MB discoloration were characterized in parallel quiescent batch experiments for up to 71 d (pH0 = 6.8). Pristine and aged FeS2 specimens were used. Parallel experiments with methyl orange (MO) and reactive red 120 (RR120) enabled a better discus... [more]

The results of an experimental study to evaluate the characteristics of R-407C thermofluid during condensation in a helically coiled copper tube heat exchanger are presented. The effects of saturation temperature (Tsat), and mass and heat fluxes of refrigerant R-407C on thermal performance and pressure drop were determined. The relationship between the refrigerant wall subcooling and heat transfer coefficients was also investigated. This paper reports the effect of the temperature of the water used as cooling medium on the heat transfer rate of condensing R-407C. The study was conducted with mass flux of R-407C in the range of 100−450 kg/m2s, mass flux of the coolant water in the range of 500−5000 kg/m2s and Tsat of 31 °C, 35 °C, and 39 °C. Compared with a straight smooth tube, the use of the helical coiled (helicoidal) tube increased the condensation rate with a corresponding pressure drop that depended on the value of Tsat of the refrigerant and temperature of the coolant.

The discovery of new metallic materials is of prime importance for the development of new technologies in many fields such as electronics, aerial and ground transportation as well as construction. These materials require metals which are obtained from various pyrometallurgical processes. Moreover, these materials need to be synthesized under extreme conditions of temperature where liquid solutions are produced and need to be contained. The design and optimization of all these pyrometallurgical processes is a key factor in this development. We present several examples in which computational thermochemistry is used to simulate complex pyrometallurgical processes including the Hall−Heroult process (Al production), the PTVI process (Ni production), and the steel deoxidation from an overall mass balance and energy balance perspective. We also show how computational thermochemistry can assist in the material selection in these extreme operation conditions to select refractory materials in co... [more]

The development of next generation Ti-based alloys demand completely new processes and approaches. In particular, the Ti-alloys of next generation will contain not only α-Ti and β-Ti phases, but also small amounts of ω-phase and intermetallic compounds. The β→ω phase transformation induced by high-pressure torsion (HPT) has been studied in detail recently. In this work, we investigated the HPT-induced α→ω phase transformation. For this purpose, we added various β-stabilizers into α-Ti matrix of studied Ti-alloys. Ti-alloys with 4% Fe, 2% Cr, 3% Ni, and 4% Co (wt. %) have been annealed at the temperatures below their point of eutectoid decomposition, from β-Ti to α-Ti, and respective intermetallics (TiFe, Ti2Co, Ti2Ni, TiCr2). Volume fraction of HPT-driven ω-phase (from ≤5 up to ~80%) depended on the amount of alloying element dissolved in the α-matrix. Evaluation of lattice parameters revealed accelerated mass transfer during HPT at room temperature corresponding to bulk diffusion in α... [more]

Among all minerals, iron is one of the elements identified early by human beings to take advantage of and be used. The role of iron in human life is so great that it made an era in the ages of humanity. Pure iron has a shiny grayish-silver color, but after combining with oxygen and water it can make a colorful set of materials with divergent properties. This diversity sometimes appears ambiguous but provides variety of applications. In fact, iron can come in different forms: zero-valent iron (pure iron), iron oxides, iron hydroxides, and iron oxide hydroxides. By taking these divergent materials into the nano realm, new properties are exhibited, providing us with even more applications. This review deals with iron as a magic element in the nano realm and provides comprehensive data about its structure, properties, synthesis techniques, and applications of various forms of iron-based nanostructures in the science, medicine, and technology sectors.

Nanotechnology addresses numerous environmental problems such as wastewater treatment. Ground water, surface water and wastewater that is contaminated by toxic organic, inorganic solutes and pathogenic microorganisms can now be treated through the application of nanotechnology. The study reports iron@copper (Fe@Cu) nanoparticles, iron nanoparticles (FeNPs) and copper nanoparticles (CuNPs) synthesized using a bioflocculant in a green approach technique. Characterization of the as-synthesized materials was achieved using analytical techniques such as Fourier transform-Infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA), Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), UV-Vis spectroscopy (UV-Vis) and X-ray diffraction (XRD). The presence of hydroxyl (−OH) and amine (−NH2) groups was shown by FT-IR spectroscopy studies and the as-synthesized material was shown to be thermostable. Elements such as oxygen, carbon, iron and copper were found to be abund... [more]

Low-temperature solid oxide fuel cells permit the possibility of metallic interconnects over conventional ceramic interconnects. Among various metallic interconnects, the ferritic interconnects are the most promising. However, chromium poisoning in them adversely affects their performance. To resolve this issue, various coatings and pretreatment methods have been studied. Herein, this article encloses the coating of CuFe2O4 spinel over two prominent ferritic interconnects (Crofer 22 APU and SUS 430). The CuFe2O4 spinel layer coating has been developed by the dip-coating of both samples in CuFe2O4 slurry, followed by heat treatment at 800 °C in a reducing environment (5% hydrogen and 95% nitrogen). Additionally, both samples were annealed to further enhance their spinel coating structure. The morphological and crystallinity analysis confirmed that the spinel coating formed multiple layers of protection while annealing further reduced the thickness and improved the densities. Moreover, t... [more]

A shift towards an economically viable biomass biorefinery concept requires the use of all biomass fractions (cellulose, hemicellulose, and lignin) for the production of high added-value products. As lignin is often underutilized, the establishment of lignin valorization routes is highly important. In-house produced organosolv as well as commercial Kraft lignin were used in this study. The aim of the current work was to make a comparative study of thermoplastic biomaterials from two different types of lignins. Native lignins were alkylate with two different alkyl iodides to produce ether-functionalized lignins. Successful etherification was verified by FT-IR spectroscopy, changes in the molecular weight of lignin, as well as 13C and 1H Nuclear Magnetic Resonance (NMR). The thermal stability of etherified lignin samples was considerably improved with the T2% of organosolv to increase from 143 °C to up to 213 °C and of Kraft lignin from 133 °C to up to 168 °C, and glass transition temper... [more]

For continuous and efficient oil/water separation and adsorption of dyes, coconut shell powder was grafted onto the surface of quartz sand by dip-coating method to make coconut shell powder-covered quartz sand filter media (CSQS) with superhydrophilic and underwater superoleophobic properties and superoleophilic and underoil highly hydrophobic properties. The contact angles of the underwater oil and underoil water with CSQS were more than 151.2° and 134.2°, respectively. A continuous oil/water separation device was designed. The separation device filled with CSQS can separate oil/water mixture (whether heavy or light oil) into water and oil at the same time with a separation efficiency of above 99.92%. The filter layer can be recovered through reverse extrusion even after lyophobic liquid penetrated the filter layer; hence, the separation efficiency of the filter layer was still above 99.99% for diesel and water mixture. Simultaneously, CSQS can effectively adsorb methylene blue with t... [more]

Nanoparticles (NPs) are known as important nanomaterials for a broad range of commercial and research applications owing to their physical characteristics and properties. Currently, the demand for NPs for use in enhanced oil recovery (EOR) is very high. The use of NPs can drastically benefit EOR by changing the wettability of the rock, improving the mobility of the oil drop and decreasing the interfacial tension (IFT) between oil/water. This paper focuses on a review of the application of NPs in the flooding process, the effect of NPs on wettability and the IFT. The study also presents a review of several investigations about the most common NPs, their physical and mechanical properties and benefits in EOR.