The energy efficiency of a system and the performance level of its equipment and installations are the two key elements based on which the investment decision in its modernization is made. They are also very important for setting up optimal operation strategies. The energy audit is a well-known and worldwide recognized tool for calculating energy performance indicators and developing improvement measures. This paper is a synthesis of the energy audit results performed for a district heating network that uses geothermal energy as its primary source of energy. The location of the heating system is inside a university campus. The first part explains the necessity of a comprehensive study on district heating networks and introduces the defining elements that characterize the analyzed equipment and installations. The complex energy balance methodology that has been developed and applied to this district heating system is presented in the second part of the paper. Next, the methodology for c... [more]

After the official launch of China’s unified carbon market, the potential for carbon emission reduction is huge. The pilot regional markets urgently need to be connected with the national carbon market to form a regional synergy and linkage mechanism and further promote the development of a unified carbon market. Spillover effects can be used to analyze the interaction between multiple markets. In this context, this study focuses on the overall spillover relationship among regional carbon trading markets. Using the VAR-GARCH-BEKK model and social network analysis (SNA), this study empirically analyzes the mean spillover effect and volatility spillover effect of regional carbon markets, and it establishes a spillover network between markets. The results show that the spillover effect of China’s regional carbon markets is widespread. Among them, the mean spillover effect is weak, and the impact period is short;. The volatility spillover effect is strong and has various directions; the sp... [more]

PEM fuel cell systems face highly dynamic load profiles in automotive application. This work showcases the impact of media supply adaption, system architecture and test rig restrictions on the transient voltage response of an automotive fuel cell stack. Current step and load profile experiments were conducted on a system test rig, featuring automotive balance of plant components, and a short stack test bench. A time scale analysis allowed us to identify the predominant effect for the voltage response in each test case. The voltage response measured in the test cases was dominated either by air supply, membrane humidification or coolant temperature dynamics. This systematic comparison of different types of test setups highlights the importance of application-like system level testing as, in contrast to common experiments, different phenomena shape the electrical stack behavior.

The smart grid merges cyber-physical systems (CPS) infrastructure with information and communication technologies (ICT) to ensure efficient power generation, smart energy distribution in real-time, and optimisation, and it is rapidly becoming the current standard for energy generation and distribution. However, the use of ICT has increased the attack surface against the electricity grid, which is vulnerable to a wider range of cyberattacks. In particular, Denial-of-Service (DoS) attacks might impact both the communication network and the cyber-physical layer. DoS attacks have become critical threats against the smart grid due to their ability to impact the normal operation of legitimate smart-grid devices and their ability to target different smart grid systems and applications. This paper presents a comprehensive and methodical discussion of DoS attacks in the smart grid, analysing the most common attack vectors and their effect on the smart grid. The paper also presents a survey of d... [more]

Taking into account both market benefits and power grid demand is one of the main challenges for cascade hydropower stations trading on electricity markets and secluding operation plan. This study develops a multi-objective optimal operation model for the long-term operation of cascade hydropower in different markets. Two objectives were formulated for economics benefits and carryover energy storage. One was to maximize the market utility value based on portfolio theory, for which conditional value at risk (CVaR) was applied to measure the risk of multi-markets. Another was the maximization of energy storage at the end of a year. The model was solved efficiently through a multi-objective particle swarm optimization (MOPSO). Under the framework of the MOPSO, the chaotic mutation search mechanism and elite individual retention mechanism were introduced to diversify and accelerate the non-inferior solution sets. Lastly, a dynamic updating of archives was established to collect the non-inf... [more]

Effectively encapsulating perovskite solar cells (PSCs) to enhance the external reliability is the key towards commercialization. We herein propose a facile encapsulation method by introducing conductive ribbons and a polyethylene terephthalate (PET) backsheet on both sides of PSC. Via applying thermoplastic polyolefin (TPO) encapsulant, we implemented PSCs with fine encapsulation, enabling considerable durability in the ambient atmosphere and even with water immersion, demonstrating almost no degradation in the device output, which is ascribed to the low water vapor transmission rate as well as the high chemical stability of TPO. The operation reliability of the encapsulated cell is also significantly increased, maintaining 80% of the initial efficiency after 770 hours’ light illumination in an ambient atmosphere. This novel encapsulation route provides a feasible idea for the commercial application of PSCs in the future.

is a genus of colorful and ornamental plants popular in landscape design on account of their high esthetic appeal. The physical properties of viburnum seeds have not been investigated in the literature to date. Therefore, the aim of this study was to characterize the seeds of selected Viburnum species and to search for potential relationships between their physical attributes for the needs of seed sorting operations. The basic physical parameters of the seeds of six Viburnum species were measured, and the relationships between these attributes were determined in correlation and regression analyses. The average values of the evaluated parameters were determined in the following range: terminal velocity—from 5.6 to 7.9 m s−1, thickness—from 1.39 to 1.87 mm, width—from 3.59 to 6.33 mm, length—from 5.58 to 7.44 mm, angle of external friction—from 36.7 to 43.8°, mass—from 16.7 to 35.0 mg. The seeds of V. dasyanthum, V. lentago and V. sargentii should be sorted in air separators, and the see... [more]

This paper studies and implements a power converter to have less current ripple output and wide voltage input operation. A three-leg converter with different primary turns is presented on its high-voltage side to extend the input voltage range. The current doubler rectification circuit is adopted on the output side to have low current ripple capability. From the switching states of the three-leg converter, the presented circuit has two equivalent sub-circuits under different input voltage ranges (Vin = 120−270 V or 270−600 V). The general phase-shift pulse-width modulation is employed to control the presented converter so that power devices can be turned on at zero voltage in order to reduce switching loss. Compared to two-stage circuit topologies with a wide voltage input operation, the presented converter has the benefits of simple circuit structure, easy control algorithm using a general integrated circuit or digital controller, and less components. The performance of the presented... [more]

(1) Background: Biological treatment of leachate in landfill sites using anaerobic ammonium oxidation (anammox) is challenging because of the intrinsic characteristics of this complex wastewater. In this work, the scale-up and subsequent full-scale implementation of the PANAMMOX® technology (LEQUIA Research Group, Girona, Catalonia, Spain) are presented as a case study to achieve long-term nitrogen (N) removal from mature leachate mostly through a completely autotrophic pathway. (2) Methods: The treatment system consists of two sequencing batch reactors (SBRs) running in series to individually operate partial nitritation (PN) and anammox (A). Following biological treatment, physicochemical oxidation (i.e., Fenton-based process) was used to remove the remaining non-biodegradable organic matter. A cost analysis comparative was conducted in relation to the former technology used on-site for treating the leachate. (3) Results: The scale-up of the process from pilot- to full-scale was succe... [more]

The cooling coefficient of performance (COPR) and energy efficiency ratio (EER) of refrigerant R-134a compressors (single- and double-compressors) with different refrigerant tonnage (200, 250, 300, 380, 500, and 700 RT) for centrifugal and Maglev centrifugal compressors change with different operating performance load percentages (10−100%), and constant-frequency and variable-frequency operation, resulting in performance differences. In particular, a water chiller can have a fixed cooling water inlet temperature of 32 °C and a variable cooling water inlet temperature between 18.33 °C and 32 °C. According to the actual test results, the commercial performance code program and parameter table of the water chiller were established. Based on the performance matching of different load chillers, the on-site load capacity was analyzed and the effective water chiller performance and model matching were determined as the best choice for the tonR number of the deicing machine and unit matching,... [more]

This article presents methods and results of experimental research to determine the power consumed when driving the working bodies of the straw bedding mobile spreader to cover cow stalls (boxes). Analysis of the design and mode parameters of the rotary finger working body influence on the energy consumption of the bedding material spreading process is carried out. Using the experimental data, it was established that the power consumed to drive the rotary finger working body of the mobile straw bedding spreader, at the tractor power take-off (PTO) shaft rotation speed of 540 min−1, the forward unit speed of 2 km/h, and performance of 1.5 kg/s, is equal to 7.633 kW. In this case, due to the installation of a rotary finger working body for spreading straw bedding, the power consumption increased by 9%. This increase will not have a significant impact on the overall energy consumption of the spreading bedding material working process, because this class tractor power reserve allows its us... [more]

Fertilizers are commonly used to improve the soil quality in both conventional and organic agriculture. One such fertilizer is dolomite for which soil application in granulated form is advantageous. These granules are commonly produced from ground dolomite powder in continuous pan transfer granulators. During production, the granulator’s operation parameters affect the granules’ properties and thereby also the overall performance of the fertilizer. To ensure product granules of certain specifications and an efficient overall production, process control and intensification approaches based on mathematical models can be applied. However, the latter require high-quality quantitative experimental data describing the effects of process operation parameters on the granule properties. Therefore, in this article, such data is presented for a lab-scale experimental setup. Investigations were carried out into how variations in binder spray rate, binder composition, feed powder flow rate, pan inc... [more]

The application of partial nitritation and anammox processes (PN/A) to remove nitrogen can improve the energy efficiency of wastewater treatment plants (WWTPs) as well as diminish their operational costs. However, there are still several limitations that are preventing the widespread application of PN/A processes in urban WWTPs such as: (a) the loss of performance stability of the PN/A units operated at the sludge line, when the sludge is thermally pretreated to increase biogas production; (b) the proliferation of nitrite-oxidizing bacteria (NOB) in the mainstream; and (c) the maintenance of a suitable effluent quality in the mainstream. In this work, different operational strategies to overcome these limitations were modelled and analyzed. In WWTPs whose sludge is thermically hydrolyzed, the implementation of an anerobic treatment before the PN/A unit is the best alternative, from an economic point of view, to maintain the stable performance of this unit. In order to apply the PN/A pr... [more]

Long-term structure stability of aerobic granules is critical to maintaining stable wastewater treatment performance. In this study, granulation and long-term stability of sludge-treating synthetic wastewater with a low chemical oxygen demand to nitrogen (COD/N) ratio of 4:1 and COD concentration of 400 mg/L in anoxic-oxic conditions were investigated for over 300 days. Inoculated suspended sludge gradually transformed into granules-dominant sludge on day 80. Due to the improved sludge volume index after 30 min settling (SVI30), mixed liquor suspended solids (MLSS) reached 5.2 g/L on day 140. Without any external intervention or disturbance, aerobic granules started to disintegrate from day 140, causing the increase in SVI and the decrease in biomass concentration until day 210, with the average sludge size reduced to 243 µm. From day 210, granular sludge started to be re-established by re-granulation, and the average granule size increased to 500 µm on day 302. During these disintegra... [more]

A bidirectional resonant converter is presented and verified in this paper for an electric vehicle battery charger/discharger system. The presented circuit can achieve forward and backward power operation, low switching losses on active devices, and wide output voltage operation. The circuit structure of the presented converter includes two resonant circuits on the primary and secondary sides of an isolated transformer. The frequency modulation approach is adopted to control the studied circuit. Owing to the resonant circuit characteristic, active devices for both forward (battery charge) and backward (battery discharge) power operation can be turned on at zero voltage switching. In order to implement a universal battery charger for different kinds of electric vehicle applications, the DC converter is demanded to have a wide output voltage range capability. The topology morphing between a full bridge resonant circuit and half bridge resonant circuit is selected to obtain high- and low-... [more]

To reveal the effect of tip clearance on the flow behaviors and pressurization performance of a helico-axial flow pump, the standard k-ε turbulence model is employed to simulate the flow characteristics in the self-developed helico-axial flow pump. The pressure, streamlines and turbulent kinetic energy in a helico-axial flow pump are analyzed. Results show that the tip leakage flow (TLF) forms a tip-separation vortex (TSV) when it enters the tip clearance and forms a tip-leakage vortex (TLV) when it leaves the tip clearance. As the blade tip clearance increases, the TLV moves along the blade from the leading edge (LE) to trailing edge (TE). At the same time, the entrainment between the TLV and the main flow deteriorates the flow pattern in the pump and causes great hydraulic loss. In addition, the existence of tip clearance also increases the possibility of TLV cavitation and has a great effect on the pressurization performance of the helico-axial flow pump. The research results provid... [more]

Four flat-sheet submerged anaerobic membrane bioreactors ran for 242 days on a simulated domestic wastewater with low Chemical Oxygen Demand (COD) and high suspended solids. Organic loading was maintained around 1.0 g COD L−1 day−1, while solids retention time (SRT) was varied from 20−90 days. This was achieved at a constant membrane flux, maintained by adjusting transmembrane pressure (TMP) in the range 1.8−9.8 kPa. Membrane fouling was assessed based on the required TMP, with mixed liquors characterised using capillary suction time, frozen image centrifugation and quantification of extracellular polymeric substances (EPS). SRT had a significant effect on these parameters: fouling was least at an SRT of 30 days and highest at 60 days, with some reduction as this extended to 90 days. Operation at SRT < 30 days showed no further benefits. Although operation at a short SRT was optimal for membrane performance it led to lower specific methane productivity, higher biomass yields and hig... [more]

Liquid hot water pretreatment is considered to be a promising method for increasing biomass digestibility due to the moderate operational conditions without chemical additions. A necessary step towards the scalability of this pretreatment process is performing pilot plant trials. Upscaling was evaluated with a scaling factor of 500, by using 50 mL in the laboratory and 25 L in a pilot plant batch reactor. Pretreatment times were varied from 30 to 240 min, and temperatures used were 180−188 °C, while applying similar heating profiles at both scales. The initial mass fraction of poplar wood chips ranged from 10% to 16%. Liquid hot water pretreatment at laboratory and pilot scale led to analogous results. The acetic acid analysis of the liquid and solid fractions obtained after pretreatment indicated that complete deacetylation of poplar biomass can be achieved.

A combined circulation system of spray evaporative cooling and air cooling (CCSSECAC) is a way to enhance the cooling performance of an air-cooled electric machine while maintaining its existing structure. Based on a traditional air-cooled machine, when the discrete evaporative cooling medium particles are scattered into the airflow, they will reach the heat source with the air circulation. The cooling capacity of the cooling system is enhanced simultaneously through the phase transition and convection heat transfer. Ultrasonic atomization is a simple way to produce tiny droplets and a good way to improve the performance of CCSSECAC. To verify the effectiveness of such a system, a principle test model was built and a multi-operational condition experiment was carried out as an exploratory study. The experimental results showed that the new cooling system was feasible for horizontal machines, and the stator coil temperature was significantly reduced compared with the air-cooled mode.

The p-AlGaN/AlGaN superlattice (SL) hole injection structure was introduced into deep ultraviolet (DUV) light-emitting diodes (LEDs) to enhance their performances. The period thicknesses of the p-Al0.8Ga0.2N/Al0.48Ga0.52N SLs affected the performances of the DUV LEDs. The appropriate period thickness of the p-Al0.8Ga0.2N/Al0.48Ga0.52N SL may enhance the hole injection of DUV LEDs. Therefore, compared with the reference LEDs, the DUV LEDs with the 10-pair Al0.8Ga0.2N (1 nm)/Al0.48Ga0.52N (1 nm) SL presented forward voltage reduction of 0.23 V and light output power improvement of 15% at a current of 350 mA. Furthermore, the 10-pair Al0.8Ga0.2N (1 nm)/Al0.48Ga0.52N (1 nm) SL could slightly suppress the Auger recombination and current overflow of the DUV LEDs in a high-current operation region. In addition to improved carrier injection, the DUV LEDs with the p-Al0.8Ga0.2N/Al0.48Ga0.52N SL hole injection structure showed reduced light absorption at their emission wavelength compared with t... [more]

This work explores for the first time the use of a fed-batch and continuous packed-bed millibioreactor for the chemoenzymatic oxidation of 2,5-furandicarboxaldehyde (DFF) to 2,5-furandicarboxylic acid (FDCA). Different operational variables were studied: temperature, substrate concentration, and flow rate using different reactors (batch, fed-batch, and a continuous packed-bed bioreactor). The best yield (100%) was achieved using the fed-batch reactor at an H2O2 flow rate of 3 µL/min with a substrate concentration (DFF) of 100 mM. Regarding the specific productivity, the highest values (>0.05 mg product/min g biocatalyst) were reached with the operation in the fed-batch bioreactor and the continuous packed-bed bioreactor. The yield of the biocatalyst decreased by 98% after the first reaction cycle during the operational stability tests, due to a substantial inactivation of the biocatalyst by H2O2 and peracid. In this study, it is possible to select the operational variables in fed-batch... [more]

Horizontal well drills are difficult to operate and require high borehole cleaning operations. The impact of cuttings accumulation on friction and torque cannot be ignored. In the process of horizontal well drilling, it is very easy to form a cuttings bed in the highly inclined eccentric annulus. The formation of the cuttings bed will not only increase the friction torque but also have a greater impact on the annulus flow. Based on the application of gas drilling in horizontal wells, this paper uses laboratory experiments to study the influence of cuttings with different particle sizes and lithology on the friction coefficient between the drill string and the borehole wall of the horizontal well section. In addition, in view of the difficulty in the migration of cuttings in gas drilling horizontal wells and the formation of cuttings deposits, this paper carries out an experimental study on the effect of the cuttings bed on drill pipe coating height and cuttings bed thickness on frictio... [more]

The integrated energy system is the mainstream energy utilization form of integrating a power system, natural gas system and thermal system, which provides a new way to solve the problem of renewable energy accommodation. The integrated energy system includes a variety of energy generation and conversion equipment, and its internal electricity, gas, cooling and thermal systems must balance the multiple energy supplies required by users. The integrated energy supplier (IES) and integrated energy user (IEU), as different stakeholders, pursue the maximization of their own profit. However, integrated energy suppliers should consider their market share and the sustainability of participating in market competition. Based on the constraints of energy access, conversion and accommodation, and the equipment for energy generation, conversion and consumption, we established an energy flow model. Constrained by the dynamic equilibrium of the supply of integrated energy suppliers and the demand of... [more]

A franchise business is a contractual relationship in which the franchisor and franchisee should cooperate to promote sustainable growth of their franchise entities. However, it is still unclear whether the relationship between franchisees and franchisors is a principal−agent or a business partner sharing a business goal. Thus, this study is a first attempt to investigate the relationship between franchisees and franchises using metafrontier and bootstrap DEA from the perspective of efficiency. We measured the efficiency of coffee franchises in Korea, which have grown rapidly in recent years despite the COVID-19 pandemic. Based on the bootstrap DEA results, there was a statistically significant difference in efficiency between franchisors and franchisees under the variable return-to-scale assumption. While the main cause of inefficiency in premium coffee chains is attributed to scale inefficiency, most franchisees have pure technological inefficiency. Thus, coffee franchisees can impro... [more]

With the increasing operation time of tunnels, the drainage system cannot fulfil its proper function as a result of the deterioration of traditional waterproof and drainage systems (TWDS), such as the blockage of drainage blind pipes and the failure of drainage boards. Therefore, the lining bears a high water pressure and even causes disasters such as tunnel leakage and lining cracking. An effective solution to mitigate these issues is to adjust the tunnel drainage scheme. In view of this, a composite waterproof and drainage system (CWDS) is proposed in this paper. To verify the effectiveness of the proposed system, a series of model experiments were conducted to study the change law of the seepage field of two drainage systems under different blockage conditions. The study results showed that longitudinal blind pipe blockage caused a more significant increase in water pressure than circular blind pipe blockage. In the case of blind pipe blockage, the water pressure of the TWDS tunnels... [more]