In order to evaluate and control the seismic effect of blasting, as well as its planning, it is required to determine the soil oscillation law, with the strike/mining facilities to be protected. One of the most commonly used equations is that of M.A. Sadovskii, defining the law of alteration in the oscillation velocity of the soil depending on distance, the explosive amount, and conditions of blasting and geologic characteristics of the soil; all of this being determined on the basis of test blasting for the specific work environment. In the Sadovskii equation two parameters, K and n appear and they are conditioned both by rock mass characteristics and blasting conditions. The practical part of this study includes experimental investigations performed in the Veliki Krivelj Open Pit in the Bor District located in Eastern Serbia and investigations carried out during mass mining in the Kovilovača Open Pit near Despotovac, Eastern Serbia. Thus this paper offers several modes for determinat... [more]

There is considerable interest recently in by-products for application in green buildings. These materials are widely used as building envelope insulators or blocks. In this study, an experimental study was conducted to test stranded driftwood residues as raw material for possible thermo-acoustic insulation panel and environmentally sustainable brick. The thermal and acoustic characteristics of such a natural by-product were examined. Part of samples were mineralized by means of cement-based additive to reinforce the material and enhance its durability as well as fire resistance. Several mixtures with different sizes of ground wood chips and different quantities of cement were investigated. The thermo-acoustic in-lab characterization was aimed at investigating the thermal conductivity, thermal diffusivity, volumetric specific heat, and acoustic transmission loss. All samples were tested before and after mineralization. Results from this study indicate that it is possible to use strande... [more]

Micro energy grids have many merits and promising applications under the smart grid vision. There are demanding procedures for their optimal planning and performance enhancement. One of the key features of a micro energy grid is its ability to separate and isolate itself from the main electrical network to continue feeding its own islanded portion. In this paper, an optimal sizing and operation strategy for micro energy grids equipped with renewable and non-renewable based distributed generation (DG) and storage are presented. The general optimization objective is to define the best DG mix and energy storage units for self-sufficient micro energy grids. A multi-objective genetic algorithm (GA) was applied to solve the planning problem at a minimum optimization goal of overall cost (including investment cost, operation and maintenance cost, and fuel cost) and carbon dioxide emission. The constraints include power and heat demands constraints, and DGs capacity limits. The candidate techn... [more]

Carbon emissions are the major cause of the global warming; therefore, the exploration of carbon emissions reduction potential is of great significance to reduce carbon emissions. This paper explores the potential of carbon intensity reduction in Beijing in 2020. Based on factors including economic growth, resident population growth, energy structure adjustment, industrial structure adjustment and technical progress, the paper sets 48 development scenarios during the years 2015⁻2020. Then, the back propagation (BP) neural network optimized by improved particle swarm optimization algorithm (IPSO) is used to calculate the carbon emissions and carbon intensity reduction potential under various scenarios for 2016 and 2020. Finally, the contribution of different factors to carbon intensity reduction is compared. The results indicate that Beijing could more than fulfill the 40%⁻45% reduction target for carbon intensity in 2020 in all of the scenarios. Furthermore, energy structure adjustment... [more]

A multi-variable optimization program has been developed to investigate the performance of Organic Rankine Cycles (ORCs) for low temperature heat recovery applications using both turbine and twin-screw expanders when account is taken of performance variation due to changes in ambient conditions. The cycle simulation contains thermodynamic models of both types of expander. In the case of the twin-screw machine, the methods used to match the operation of the expander to the requirements of the cycle are described. The performance of turbine expanders in a superheated ORC has been modelled using correlations derived from operational data for single stage reaction turbines to predict the turbine efficiency at “off-design” conditions. Several turbine configurations have been considered including variable nozzle area and variable speed. The capability of the cycle model has been demonstrated for the case of heat recovery from a steady source of pressurized hot water at 120 °C. The system par... [more]

The development of renewable energy is one of the aspirations of the European Union energy policy, being generated by the struggle against climatic changes and by the intention of achieving a high rate of energy autonomy. In this context, geothermal energy is a viable solution which has been little exploited so far. Analysing the EU’s dependence on imported energy, the paper provides a short review of the utilization of geothermal energy, of the advantages and of the problems raised by the exploitation of this resource. It also analyzes the availability of this resource in Romania and the contribution it can have towards the energy autonomy of local communities. The paper presents a particular methodology for calculating the energy autonomy. Using this methodology, one can obtain an energetic overview of the community or the area analyzed, can calculate the degree of energy autonomy and, based on the results achieved, a sustainable development strategy can be designed. The low enthalpy... [more]

Super typhoon activity is likely to make the electric power network fail, or blow the wind-measuring device off, which all lead to the yaw control system of wind turbine being inactive. Under this condition, blades can be blown by the violent side wind from unfavorable directions, and the aerodynamic loads on the wind turbine will be increased by a large amount, which can lead to low-cycle fatigue damage and other catastrophic collapses. So far, not enough consideration has been given to the above problems in wind turbine design. Using the transient computational fluid dynamics (CFD), this study investigates the wind load characteristics of offshore wind turbines under typhoon condition with 360-degree full wind directions. Two primary influence factors of the aerodynamic characteristics of wind turbines are clarified: variation of the wind direction and different parking positions of the wind rotor. Using 3D-numerical simulation results, this study provides detailed references for the... [more]

Plasma stability is one of the obstacles in the path to the successful operation of fusion devices. Numerical control-oriented codes as it is the case of the widely accepted RZIp may be used within Tokamak simulations. The novelty of this article relies in the hierarchical development of a dynamic control loop. It is based on a current profile Model Predictive Control (MPC) algorithm within a multiloop structure, where a MPC is developed at each step so as to improve the Proportional Integral Derivative (PID) global scheme. The inner control loop is composed of a PID-based controller that acts over the Multiple Input Multiple Output (MIMO) system resulting from the RZIp plasma model of the Tokamak à Configuration Variable (TCV). The coefficients of this PID controller are initially tuned using an eigenmode reduction over the passive structure model. The control action corresponding to the state of interest is then optimized in the outer MPC loop. For the sake of comparison, both the tr... [more]

The critical problem arising from the depletion of fossil fuels has stimulated recent interests in alternative sources for petroleum-based fuel. An alternative fuel should be technically feasible, readily available, sustainable, and techno-economically competitive. Biodiesel is considered as a potential replacement of conventional diesel fuel, which is prepared from non-edible and high-acid feedstock via transesterification technology. The focus of this study is to investigate the catalytic activity of mixed metal oxides (MMOs) as catalysts for biodiesel production by using non-edible jatropha oil as feedstock. Various types of MMOs (CaO-MgO, CaO-ZnO, CaO-La₂O₃, and MgO-ZnO) were synthesized via a co-precipitation method. In this study, transesterification activities are closely related to the physicochemical properties of catalysts. The presence of different active metals in the binary system greatly influenced the surface area, basicity, and the stability of catalysts. The catalytic... [more]

Heat dissipation per unit volume has grown rapidly, as the size of modern electronic devices has continued to decrease. The air flow induced by an oscillating cantilever blade enhances the heat transfer performance of high heat density devices. The heat transfer improvement mainly depends on the velocity magnitude and distribution of air streams induced by the vibrating blade. Accordingly, this study numerically and experimentally examines the time-varying flow characteristics of a vibrating cantilever for five blade types. The blades are rectangular or trapezoidal with various widths and actuated at various frequencies. The fluid domain is numerically discretized using a dynamic meshing scheme to model the three-dimensional time-varying vibrating blade. The experiment utilizes nine hot-wire velocity meters to measure the average velocities. The flow structure with streamlines and velocity contours of the induced air flow are determined at various section planes. The results show that... [more]

Classification problems and their corresponding solving approaches constitute one of the fields of machine learning. The application of classification schemes in Renewable Energy (RE) has gained significant attention in the last few years, contributing to the deployment, management and optimization of RE systems. The main objective of this paper is to review the most important classification algorithms applied to RE problems, including both classical and novel algorithms. The paper also provides a comprehensive literature review and discussion on different classification techniques in specific RE problems, including wind speed/power prediction, fault diagnosis in RE systems, power quality disturbance classification and other applications in alternative RE systems. In this way, the paper describes classification techniques and metrics applied to RE problems, thus being useful both for researchers dealing with this kind of problem and for practitioners of the field.

Plate Fin Heat Sinks (PFHS) are among the simplest and most widespread devices for electronics cooling. Because of the many design parameters to be considered, developing both cost and thermal effective PFHS is a critical issue. Here, a novel thermal model of PFHS is presented. The model has a broad field of applicability, being comprehensive of the effects of flow bypass, developing boundary layers, fin efficiency and spreading resistance. Experiments are then carried out to validate the proposed thermal model, and its good accuracy is demonstrated. Finally, an optimization methodology based on genetic algorithms is proposed for a cost-effective selection of the design parameters of PFHS, which is particularly effective with semi-active configurations. Such an optimization methodology is then tested on a commercial heat sink, resulting in a possible 53% volume reduction at fixed thermal performances.

Micro (0.5⁻10 kW) organic Rankine cycle (ORC) power systems are nowadays considered for domestic power generation. Selection of a suitable expander is one of the most important problems connected with the domestic ORC system design. Volumetric machines or micro-turbines can be adopted as an expander in domestic ORC systems. Scroll and screw expanders are a common choice and were successfully applied in different small- and micro-power applications. However, micro-turbines as well as scroll and screw expanders are mechanically complicated and expensive. An alternative are rotary-vane machines, which are simple and cheap compared to micro-turbines. This paper documents a study providing the experimental and numerical analyses on the rotary vane expander operating conditions in a micro-ORC system. A test-stand was designed and set up and a series of experiments was performed using the test-stand. Results of these experiments were further used as an input to numerical simulations of an exp... [more]

The UK is currently suffering great overheating issues in summer, especially in residential buildings where no air-conditioning has been installed. This overheating will seriously affect people’s comfort and even health, especially for elderly people. Phase change materials (PCMs) have been considered as a useful passive method, which absorb excessive heat when the room is hot and release the stored heat when the room is cool. This research has adopted a simulation method in DesignBuilder to evaluate the effectiveness of using PCMs to reduce the overheating issues in UK residential applications and has analyzed potential factors that will influence the effectiveness of overheating. The factors include environment-related (location of the building, global warming/climate change) and construction-related (location of the PCM, insulation, heavyweight/lightweight construction). This research provides useful evidence about using PCMs in UK residential applications and the results are helpfu... [more]

In this paper, a photovoltaic (PV)-based single ended primary-inductor converter (SEPIC) is developed with introduction of dual-fuzzy logic controller (FLC) maximum power point tracking (MPPT) algorithm. Separate FLC parts, for the first time used for MPPT, are configured for optimal operations of both buck and boost operations. During buck operation, a high overshoot voltage exists, and during boost operation, an undershoot voltage occurs, both during the initial rising period. Definitely, a single-FLC MPPT could not be able to minimize both problems, which on the other hand can be handled by the proposed MPPT algorithm. For evaluation purposes, buck operation has been conducted during high irradiance, while during low irradiance, boost operation has been conducted. The dual-FLC MPPT with SEPIC was simulated in MATLAB-Simulink, and further a laboratory prototype was implemented with a TMS320F28335 eZdsp board. Both simulation and experimental results and comparison analysis (with the... [more]

Integrating natural resources and ecological services in the production process is crucial to implement sustainable agriculture. However, the measurement of natural resource efficiency remains difficult. This paper aims at contributing to this issue, by investigating French farms’ use and excess (slack) of energy resources through Data Envelopment Analyses (DEA). Results show that disentangling energy resources from the rest of intermediate consumption highlights energy use excess which is masked when considering intermediate consumption as a whole. The analysis of the determinants of energy use excess and of intermediate consumption shows a discrepancy in results, which policy-makers should take into account when designing energy policies. In addition, results show that large and highly capital intensive farms perform better in terms of energy use excess, while the dependence on public subsidies is a constraint.

Fuel cells are the most clean and efficient power source for vehicles. In particular, proton exchange membrane fuel cells (PEMFCs) are the most promising candidate for automobile applications due to their rapid start-up and low-temperature operation. Through extensive global research efforts in the latest decade, the performance of PEMFCs, including energy efficiency, volumetric and mass power density, and low temperature startup ability, have achieved significant breakthroughs. In 2014, fuel cell powered vehicles were introduced into the market by several prominent vehicle companies. However, the low durability and high cost of PEMFC systems are still the main obstacles for large-scale industrialization of this technology. The key materials and components used in PEMFCs greatly affect their durability and cost. In this review, the technical progress of key materials and components for PEMFCs has been summarized and critically discussed, including topics such as the membrane, catalyst... [more]

Progressive cities worldwide have demonstrated political leadership by initiating meaningful strategies and actions to tackle climate change. However, the lack of knowledge concerning embodied greenhouse gas (GHG) emissions of cities has hampered effective mitigation. We analyse trans-boundary GHG emission transfers between five Australian cities and their trading partners, with embodied emission flows broken down into major economic sectors. We examine intercity carbon footprint (CF) networks and disclose a hierarchy of responsibility for emissions between cities and regions. Allocations of emissions to households, businesses and government and the carbon efficiency of expenditure have been analysed to inform mitigation policies. Our findings indicate that final demand in the five largest cities in Australia accounts for more than half of the nation’s CF. City households are responsible for about two thirds of the cities’ CFs; the rest can be attributed to government and business cons... [more]

Aircraft engine gas-path health monitoring (GPHM) plays a critical role in engine health management (EHM). Among model-based approaches, the Kalman filter (KF) has been widely employed in GPHM. The main shortcoming of KF-based scheme lies in the lack of robustness against uncertainties. To enhance robustness, this paper describes a new GPHM architecture using a sliding mode observer (SMO). The convergence of the error system in uncertainty-existing circumstances is demonstrated, and the proposed method is developed to estimate components’ performance degradations regardless of modeling uncertainties. Simulations using a nonlinear model of a turbofan engine are presented, in which health monitoring problems are handled by the KF and the SMO, respectively. Results indicate the proposed approach possesses better diagnostic performance compared to the KF-based scheme, and the SMO shows its strong robustness and great potential to be applied to GPHM.

This study describes the environmental impact of the material production, transportation, and construction phases from the construction site perspective. CO₂ emissions for each process were determined using the Korea Life Cycle Inventory Database (LCI DB) in the material production phase, and the actual amounts of oil consumption for transportation equipment were identified in the material transportation phase. Generally, the oil and electric energy consumed during the construction was evaluated by direct monitoring. Through the construction period and cost according to work type, a correlation with CO₂ emissions was also investigated. In addition, CO₂ emissions were examined through the system capacity and gross floor area for each work type. The calculations have shown that CO₂ emissions from the material production phase constitute 93.4% of the total CO₂ emissions. In addition, CO₂ emissions from the material transportation and on-site construction account for 2.4% and 4.2% of the t... [more]

A microgrid is a micro-power system composed of local distributed generators, energy storage systems, loads, and other components in a local power network. Because renewable energy sources show relatively large output power variation, the integration of distributed generators in a microgrid often requires the installation of a large-scale energy storage system. The energy storage system is connected to a local AC bus via the DC/AC converter with an output inductor-capacitor (LC) filter. The energy storage system power converters generally form the local AC bus voltage. This grid-forming operation requires fast and robust voltage control to properly maintain a stable energy flow and high power quality in the local AC bus. In this paper, two major voltage control schemes—double-loop control and direct voltage control—are analytically compared, and their effects on the power quality of the microgrid are illustrated. The dynamic performance is compared through simulations and experimental... [more]

As a promising and advanced technology, enhanced geothermal systems (EGS) can be used to generate electricity using deep geothermal energy. In order to better utilize the EGS to produce electricity, power cycles’ selection maps are generated for people to choose the best system based on the geofluids’ temperature and dryness conditions. Optimizations on double-flash system (DF), flash-organic Rankine cycle system (FORC), and double-flash-organic Rankine cycle system (DFORC) are carried out, and the single-flash (SF) system is set as a reference system. The results indicate that each upgraded system (DF, FORC, and DFORC) can produce more net power output compared with the SF system and can reach a maximum net power output under a given geofluid condition. For an organic Rankine cycle (ORC) using R245fa as working fluid, the generated selection maps indicate that using the FORC system can produce more power than using other power cycles when the heat source temperature is below 170 °C. E... [more]

In the context of the liberalization of electricity markets, forecasting prices is essential. With this aim, research has evolved to model the particularities of electricity prices. In particular, dynamic factor models have been quite successful in the task, both in the short and long run. However, specifying a single model for the unobserved factors is difficult, and it cannot be guaranteed that such a model exists. In this paper, model averaging is employed to overcome this difficulty, with the expectation that electricity prices would be better forecast by a combination of models for the factors than by a single model. Although our procedure is applicable in other markets, it is illustrated with an application to forecasting spot prices of the Iberian Market, MIBEL (The Iberian Electricity Market). Three combinations of forecasts are successful in providing improved results for alternative forecasting horizons.

The Smart Grid incorporates advanced information and communication technologies (ICTs) in power systems, and is characterized by high penetration of distributed energy resources (DERs). Whether it is the nation-wide power grid or a single residential building, the energy management involves different types of resources that often depend on and influence each other. The concept of virtual power plant (VPP) has been proposed to represent the aggregation of energy resources in the electricity market, and distributed decision-making (DDM) plays a vital role in VPP due to its complex nature. This paper proposes a framework for managing different resource types of relevance to energy management for decentralized VPP. The framework views VPP as a hierarchical structure and abstracts energy consumption/generation as contractual resources, i.e., contractual offerings to curtail load/supply energy, from third party VPP participants for DDM. The proposed resource models, event-based approach to d... [more]

An increase in the number of volatile renewables in the electricity grid enhances the imbalance of supply and demand. One promising candidate to solve this problem is to improve the energy storage. The Ecovat system is a new seasonal thermal energy storage system currently under development. In this paper, an integer linear programming model is developed to describe the behaviour and potential of this system. Furthermore, it is compared with a previously developed model, which is simplifying the behaviour of the Ecovat system much more, but is much less computationally expensive. It is shown that the new approach performs significantly better for several cases. For controlling a real Ecovat system in the future we may incorporate a number of improvements identified by our comparison analysis into the previously developed approach, which may help increase the quality of the obtained results without increasing the computational effort too much.