The efficiency requirements for hydraulic pumps applied in automatic transmissions in future generations of automobiles will increase continuously. In addition, the pumps must be able to cope with multiphase flows to a certain extent. Given this background, a balanced vane pump (BVP), an internal gear pump (IGP) and a three-dimensional geared tumbling multi chamber (TMC) pump are analyzed and compared by a computational fluid dynamics (CFD) approach with ANSYS CFX and TwinMesh. Furthermore, test bench measurements are conducted to obtain experimental data to validate the numerical results. The obtained numerical results show a reasonable agreement with the experimental data. In the first CFD setup, the conveying characteristics of the pumps with pure oil regarding volumetric efficiencies, cavitation onset and pressure ripple are compared. Both the IGP and the BVP show high volumetric efficiencies and low pressure ripples whereas the TMC shows a weaker performance regarding these object... [more]

Smart WiFi thermostats, when they first reached the market, were touted as a means for achieving substantial heating and cooling energy cost savings. These savings did not materialize until additional features, such as geofencing, were added. Today, average savings from these thermostats of 10−12% in heating and 15% in cooling for a single-family residence have been reported. This research aims to demonstrate additional potential benefit of these thermostats, namely as a potential instrument for conducting virtual energy audits on residences. In this study, archived smart WiFi thermostat measured temperature data in the form of a power spectrum, corresponding historical weather and energy consumption data, building geometry characteristics, and occupancy data were integrated in order to train a machine learning model to predict attic and wall R-Values, furnace efficiency, and air conditioning seasonal energy efficiency ratio (SEER), all of which were known for all residences in this st... [more]

Industrial circulating cooling water contains a large amount of low-quality energy, which is lost to the environment through cooling towers. It is of great significance and potential to recover the waste heat to improve energy-saving effects and economic efficiency. However, the effect of common water harvesting and energy saving devices is not significant. Heat pumps have been shown to be effective in improving low-quality heat energy in energy conversion systems, although there are not many applications of heat pump scenarios in engineering practice. Based on this, a recovery solution of circulating cooling water waste heat and water resource using lithium bromide absorption heat pump has been put forward. The energy-saving performance of the recovery system was simulated and analyzed using Aspen Plus V10.0 (Bedford, MA, USA) to explore the effects of the parameters of the working medium in evaporators, condensers, absorbers, generators, heat exchangers, etc., and the modelling resul... [more]

In the 21st century, researchers have been showing keen interest in the areas of wireless networking and internet of things (IoT) devices. Conventionally, batteries have been used to power these networks; however, due to the limited lifespan of batteries and with the recent advancements in piezoelectric technology, there is a dramatic increase in renewable energy harvesting devices. In this research, an eco-friendly wind energy harvesting device based on the piezoelectric technique is analytically modeled, numerically simulated, and statistically optimized for low power applications. MATLAB toolbox SIMSCAPE is utilized to simulate the proposed wind energy harvester in which a windmill is used to produce rotational motion due to the kinetic energy of wind. The windmill’s rotational shaft is further connected to the rotary to linear converter (RLC) and vibration enhancement mechanism (VEM) for the generation of translational mechanical vibration. Consequently, due to these alternative li... [more]

One of the marketing challenges of unmanned aerial vehicles (UAVs) for various applications is enhancing flight durability. Due to the superior characteristics of proton exchange membrane fuel cells (PEMFCs), they have the potential to reach a longer flight time and higher payload. In this regard, a numerical assessment of a UAV air-cooled PEMFC is carried out using a three-dimensional (3-D), multiphase, and non-isothermal model on three flow fields, i.e., unblocked bean-shaped, blocked bean-shaped, and parallel. Then, the results of single-cell modeling are generalized to the PEMFC stack to provide the power of 2.5 kW for a UAV. The obtained results indicate that the strategy of rising air stoichiometry for cooling performs well in the unblocked bean-shaped design, and the maximum temperature along the channel length reaches 331.5 K at the air stoichiometric of 30. Further, it is found that the best performance of a 2.5 kW PEMFC stack is attained by the bean-shaped design without bloc... [more]

As the number of EVs increases, their impact on electrical systems will be substantial. Novel management schemes are needed to manage the electrical load they require when charging. Literature is rich with different techniques to manage and control this effect on the grid by controlling and optimizing power flow. Although these solutions heavily rely on communication lines, they mostly treat communication as a black box. It is important to develop communication solutions that can integrate EVs, charging stations (CSs), and the rest of the grid in an interoperable way. A standard approach would be indispensable as there are different EV models manufactured by different companies. The IEC 61850 standard is a strong tool used for developing communication models for different smart grid components. However, it does not have the necessary models for implementing smart EV management schemes that coordinate between EVs and CSs. In this paper, these missing links are addressed through the deve... [more]

Nanoporous graphene membranes have drawn special attention in the gas-separation processes due to their unique structure and properties. The complexity of the physical understanding of such membrane designs restricts their widespread use for gas-separation applications. In the present study, we strive to propose promising designs to face this technical challenge. In this regard, we investigated the permeation and separation of the mixture of adsorptive gases CO2 and CH4 through a two-stage bilayer sub-nanometer porous graphene membrane design using molecular dynamics simulation. A CH4/CO2 gashouse mixture with 80 mol% CH4 composition was generated using the benchmarked force-fields and was forced to cross through the porous graphene membrane design by a constant piston velocity. Three chambers are considered to be feeding, transferring, and capturing to examine the permeation and separation of molecules under the effect of the two-stage membrane. The main objective is to investigate th... [more]

The recent developments in renewable energy have led to a higher proportion of converter-connected power generation sources in the grid. Operating a high renewable energy penetration power system and ensuring the frequency stability could be challenging due to the reduced system inertia, which is usually provided by the conventional synchronous generators. Previous studies have shown the potential of wind turbines to provide an inertia response to the grid based on the measured rate of change of the grid frequency. This is achieved by controlling the kinetic energy extraction from the rotating parts by its converters. In this paper, we derive a spectral-based model of the grid frequency by analyzing historical measurements. The spectral model is then used to generate realistic, generic, and stochastic signals of the grid frequency for typical aero-elastic simulations of wind turbines. The spectral model enables the direct assessment of the additional impact of the inertia response cont... [more]

Anaerobic digestion is considered unsuitable for the bioremediation of tannery effluent due to process inhibition, mainly due to high concentrations of sulfur species, and the accumulation of H2S and/or NH3. This study using the standardized biochemical methane potential protocol showed that efficient processing is possible with slaughterhouse wastewater, provided sufficient functional biomass is present at the start of the process and the SO42− concentration is below inhibition threshold. Methanogenic activity (K = 13.4−17.5 and µm = 0.15−0.27) and CH4 yields were high when reactors were operated ISR ≥ 3 and/or lower SO42− ≤ 710 mg/L while high SO42− ≥ 1960 mg/L and ISR < 3.0 caused almost complete inhibition regardless of corresponding ISR and SO42−. The theoretical optimum operating conditions (922 mg/L SO42−, ISR = 3.72) are expected to generate 361 mL biogas/gVS, 235 mL CH4/gVS with reduction efficiencies of 27.5% VS, 27.4% TS, 75.1% TOC, 75.6% SO42−, and 41.1% COD. This implies t... [more]

After the Fukushima Daiichi Accident, the safety features such as accident tolerant fuel (ATF) and diverse and flexible coping strategies (FLEX) for existing nuclear fleets are being investigated by the US Department of Energy under the Light Water Reactor Sustainability Program. This research is being conducted to quantify the risk-benefit of these safety features. Dynamic probabilistic risk assessment (DPRA)-based response-surface approach has been presented to quantify the FLEX and ATF benefits by estimating the risk associated with each option. ATFs with multilayered silicon carbide (SiC), iron-chromium-aluminum, and chromium-coated zirconium cladding were considered in this study. While these ATF candidates perform better than the current zirconium cladding (Zr), they may introduce additional failure modes in some operating conditions. The fuel failure analysis modules (FAMs) were developed to investigate ATF performance. The dynamic risk assessments were performed using RAVEN, a... [more]

This research emphasizes the analysis and assessment of the environmental impact in the construction sector. It aims to propose a model for analyzing the management of environmental resources in the building process. This specific sector presents a significant potential risk of negatively affecting the environment, through pollution, energy consumption, and waste generation. Environmental responsibility involves analyzing the environmental impact and implementing effective solutions for an adequate governance of the environmental resources. Various life cycle assessment methods are employed to design a new model of management of environmental resources, starting from the factors impacting the environment. The resulting model takes these factors into account and carries several advantages from an organizational point of view. One novel result is that the model can be applied at a microeconomic level as well as at a macroeconomic level. By implementing this model, the preconditions for r... [more]

One of the fundamental maintenance tasks of ports is the periodic dredging of them. This is necessary to guarantee a minimum draft that will enable ships to access ports safely. The determination of bathymetries is the instrument that determines the need for dredging and permits an analysis of the behavior of the port bottom over time, in order to achieve adequate water depth. Satellite data processing to predict environmental parameters is used increasingly. Based on satellite data and using different machine learning algorithm techniques, this study has sought to estimate the seabed in ports, taking into account the fact that the port areas are strongly anthropized areas. The algorithms that were used were Support Vector Machine (SVM), Random Forest (RF) and the Multi-Adaptive Regression Splines (MARS). The study was carried out in the ports of Candás and Luarca in the Principality of Asturias. In order to validate the results obtained, data was acquired in situ by using a single bea... [more]

Operation scheduling in electric power grids is one of the most practical optimization problems as it sets a target for the efficient management of the electric power supply and demand. Advancement of a method to solve this issue is crucially required, especially in microgrids. This is because the operational capability of microgrids is generally lower than that of conventional bulk power grids, and therefore, it is extremely important to develop an appropriate, coordinated operation schedule of the microgrid components. Although various techniques have been developed to solve the problem, there is no established solution. The authors propose a problem framework and a solution method that finds the optimal operation schedule of the microgrid components considering the uncertainty in the available data. In the authors’ proposal, the objective function of the target problem is formulated as the expected cost of the microgrid’s operations. Since the risk of imbalance in the power supply a... [more]

Smart meters are used to measure the energy consumption of households. Specifically, within the energy consumption task, a smart meter must be used for load forecasting, the reduction in consumer bills as well as the reduction in grid distortions. Smart meters can be used to disaggregate the energy consumption at the device level. In this paper, we investigated the potential of identifying the multimedia content played by a TV or monitor device using the central house’s smart meter measuring the aggregated energy consumption from all working appliances of the household. The proposed architecture was based on the elastic matching of aggregated energy signal frames with 20 reference TV channel signals. Different elastic matching algorithms, which use symmetric distance measures, were used with the best achieved video content identification accuracy of 93.6% using the MVM algorithm.

Operation and maintenance constitute a substantial share of the lifecycle expenditures of an offshore renewable energy farm. A noteworthy number of methods and techniques have been developed to provide decision-making support in strategic planning and asset management. Condition monitoring instrumentation is commonly used, especially in offshore wind farms, due to the benefits it provides in terms of fault identification and performance evaluation and improvement. Incorporating technology advancements, a shift towards automation and digitalisation is taking place in the offshore maintenance sector. This paper reviews the existing literature and novel approaches in the operation and maintenance planning and the condition monitoring of offshore renewable energy farms, with an emphasis on the offshore wind sector, discussing their benefits and limitations. The state-of-the-art in industrial condition-based maintenance is reviewed, together with deterioration models and fault diagnosis and... [more]

Photovoltaic water pumping systems (PVWPS) are a promising solution to improve domestic water access in low-income rural areas. It is challenging, however, to make them more affordable for the local communities. We develop here a comparative methodology to assess relevant features of both widely employed PVWPS architecture with water tank storage, and hardly used PVWPS architecture with a battery bank instead of tank storage. The quantitative comparison is carried out through techno-economic optimization, with the goal of minimizing the life cycle cost of PVWPS with constraints on the satisfaction of the water demand of local inhabitants and on the groundwater resource sustainability. It is aimed to support decision-makers in selecting most appropriate storage for domestic water supply projects. We applied the methodology in the rural village of Gogma, Burkina Faso. Results indicate that the life-cycle cost of an optimized PVWPS with batteries is $24.1k while it is $31.1k if a tank is... [more]

Safety monitoring provides the detection of changes in systems or operations that may suggest any case of approaching a point close to exceeding the acceptable safety standards and indicates whether corrective/prevention actions have been taken. Safety information should be maintained within the scope of transport undertakings to ensure safety and be communicated to all responsible staff, depending on each person’s function in the processes. Regulatory authorities should continuously monitor the implementation of safety management processes and the processes performed by road transport service providers. Safety management, therefore, requires investment in development and modernisation to meet market needs resulting from the mobility of residents, the growth of transport, and the obligations of countries resulting from the transport and environmental policy pursued by the European Union. Along with changes in the transport system, a need to assess their significance for the transport s... [more]

So far, the torrefaction process has been merely discussed based on the physical and chemical characteristics of the final product, but the mechanism has not been yet pondered and investigated. Thus far, microwave torrefaction has been predominately used for thermal pre-treatment; therefore, a paradigm shift in the methodology has been introduced by using a Joule heating system. The article mainly focuses on the thermal engineering aspect of the torrefaction process. The densified black pine underwent thermal pre-treatment at a temperature of 523 K. The furnace used for torrefaction was initially improvised to carry out thermal degradation at quasi-static/dynamic conditions. A 3D PDE thermal model was developed to determine the numerical solution and temperature distribution across a black pine pellet. To compare the effect of the linear ramping profile, time-dependent as well as fixed Dirichlet conditions were applied to the proposed model. The mass distribution, duration of the torre... [more]

In the last ten years, there has been a progressive improvement in rural electrification indexes in developing countries, and renewable energies are progressively being integrated into electrification programs. In Cuba, the government has set a target of 700 MW in solar photovoltaic energy by 2030, including rural electrification and off-grid systems. Within this framework, 10,000 modular systems of 300 Wp are being installed in isolated communities. Nowadays, previously diesel-electrified settlements are migrating into renewable energy technologies projects in rural Cuba. The objective of this research is to evaluate the sustainability of these changes in order to identify the implications for other developing countries, taking four different dimensions into account: environmental, technical, socioeconomic, and institutional. For this purpose, the rural communities of Yaguá (diesel-based) and Río Abajo (solar-based) in the province of Sancti Spiritus are visited and studied. Results s... [more]

In this work, the diffusion process of sodium (Na) in molybdenum (Mo) thin films while it was deposited on soda lime glass (SLG) was studied. A small amount of oxygen was present in the chamber while the direct-current (DC) magnetron sputtering was used for the deposition. The substrate temperatures were varied to observe its effect. Such molybdenum films, with or without oxidations, are often used in thin film solar cells, either as back contact or as hole transport layers. Secondary ion mass spectrometry (SIMS) was used to quantify the concentration of the species. A grain diffusion mechanistic model incorporating the effect of grain and grain boundary geometrical shape and size was developed. The model was used to provide an in-depth theoretical analysis of the sodium diffusion in molybdenum thin films that lead to the measured SIMS data. It was observed that not only diffusion coefficients should be considered when analyzing diffusion processes in thin films but also the ratio of g... [more]

Lignocellulosic biomass is one of the dominant renewable energy resources suited for the production of sustainable biofuels and other energy purposes. This study was focused on weed management strategies that can improve the establishment of six lignocellulosic crops. The studied crops included: giant miscanthus, switchgrass, giant reed, cardoon, sweet sorghum, and kenaf. Delayed planting, increased planting densities, and mulching techniques can suppress weeds in giant miscanthus. Weed competition is detrimental for switchgrass establishment. Seedbed preparation and cultivar selection can determine its ability to compete with weeds. Giant reed is unlikely to get outcompeted by weeds, and any weed control operation is required only for the first growing season. Competitive cultivars and increased seeding rates maximize the competitiveness of cardoon against weeds. Several cultural practices can be used for non-chemical weed management in sweet sorghum and kenaf. For all crops, pre-emer... [more]

We analyze the effect that the geometry of the Effective Propped Volume (EPV) has on the economic performance of hydrofractured multistage shale gas wells. We study the sensitivity of gas production to the EPV’s geometry and we compare it with the sensitivity to other parameters whose relevance in the production of shale gas is well known: porosity, kerogen content and permeability induced in the Stimulated Recovery Volume (SRV). To understand these sensitivities, we develop a high-fidelity 3D numerical model of shale gas flow that allows determining both the Estimated Ultimate Recovery (EUR) of gas as well as analyzing the decline curves of gas production (DCA). We find that the geometry of the EPV plays an important role in the economic performance and gas production of shale wells. The relative contribution of EPV geometry is comparable to that of induced permeability of the SRV or formation porosity. Our results may lead to interesting technological developments in the oild and gas... [more]

This paper proposes an adaptive dynamic Mho distance relay based on a phase comparator scheme for protecting interconnected transmission networks compensated with a Thyristor Controlled Series Capacitor (TCSC). The proposed relay uses an impedance index factor to initiate the fault detection subroutine. The RMS of the positive sequence current of the faulted loop and the TCSC terminal current are compared for TCSC zone identification. A phase comparator for ground and phase distance elements is proposed, relying on the positive sequence voltage as a polarized memory quantity, while the operating and polarizing quantities are developed using estimated TCSC impedance to mitigate its negative impact. The proposed scheme is easy in implementation and independent on synchronized data transfer, as minimum communication requirements are needed. To evaluate the performance of the proposed scheme, extensive simulation studies were carried out on an IEEE9 bus system compensated with TCSC for dif... [more]

The paper analyses the research problem of conducting diagnostic reasoning for dynamic objects to eliminate the possibility of formulating false diagnoses resulting from different delays of the symptoms related to a particular fault while simultaneously striving to obtain high distinguishability. The research aimed to develop a new diagnostic inference method robust to symptom delays and characterised by high accuracy of generated diagnosis. Known methods ensuring the correctness of inference in the case of symptom delays but at the cost of reducing distinguishability of faults have been characterised. A new inference method was developed, which uses the three-valued residual evaluation and knowledge regarding elementary symptom sequences. A formal description of the diagnosing system and the proposed method are given. The method of obtaining the knowledge about the order of symptoms based on a cause-and-effect graph and was characterised. The method’s effectiveness was presented in si... [more]

Taiwan lies in the circum-Pacific earthquake zone. The seabed soil of offshore wind farms in Taiwan is mainly composed of loose silty sand and soft, low-plasticity clay. The seismic demand for offshore wind turbines has been given by the local code. Ground-motion analysis is required to consider the site effects of the soil liquefaction potential evaluation and the foundation design of offshore wind turbines. However, the depth of the engineering bedrock for ground motion analysis is not presented in the local code. In this study, we develop a three-dimensional ground model of an offshore wind farm in the Changhua area, through use of collected in situ borehole and PS (P wave (compression) and S (shear) wave velocities) logging test data. The engineering bedrock is the sediment at the depth where the average shear wave velocity of soil within 30 m, Vsd30, is larger than 360 m/s. In this ground model, the shear wave velocity of each type of soil is quantified using the seismic empirical... [more]