The construction sector has a large impact on the environment and available resources. Natural resources and energy consumption occurs not only during the operation of the facility, but also during its construction. In addition, this situation often occurs when work already completed requires rework. In such cases, not only the reuse of resources and energy occurs but also generation of waste. Many studies support the relationship between communication and project efficiency, which is expressed in the cost of rework. At present there is no available tool to quantify the evaluation of this relationship. This study aims to fill this knowledge gap. The article purpose was to create ANNs (artificial neural networks) for assessing and predicting the impact of communication factors on rework costs in construction projects. During the data collection phase, 12 factors that influence communication were identified and assessed. The level of rework costs in 18 construction projects was also calc... [more]

The purpose of this study is to analyze the applicability of a sunken vessel as an artificial reef in a high wave energy area in a shallow water zone. Artificial reefs in general shapes are unlikely to be installed and maintained stably in high-energy wave zones. To solve this problem, a method for using a large 2000-ton class sunken vessel as an artificial reef was proposed in this study. Accordingly, we analyzed the applicability, including stability, of the sunken vessel as an artificial reef on the east coast of South Korea, where high-energy waves and swells are observed frequently. In the analysis process, various methods, such as numerical simulation and a hydraulic model experiment, were utilized. 2D and 3D numerical simulations were conducted to simulate the wave energy in the area where the sunken vessel was installed as an artificial reef to identify wave force applied to the vessel. Moreover, a hydraulic model experiment using a sunken vessel model as an artificial reef was... [more]

The paper focuses on the study of a semi-activated system, based on a combination of two movements of forced pitching and free-heaving motion. Therefore, quantifying with accuracy the hydrodynamic forces applied on the hydrofoil seems to be crucial. This is investigated throughout a numerical analysis of the hydrofoil dynamics. The deformable structure is oscillating in a low-Reynolds number flow. In this study, a hydrofoil animated by a combined forced pitching and heaving movements is considered. Various materials of the hydrofoil structure are studied, from the rigid material to a more flexible one. A partitioned implicit coupling approach is applied in order to consider the Fluid-Structure Interaction (FSI) effects, while the Navier−Stokes equations are solved using the Arbitrary Lagrangian−Eulerian (ALE) method. Both the viscous incompressible Navier−Stokes equations and the elasticity equation are solved using finite volume method. The study is based on the analysis of the hydrod... [more]

This paper proposes a computational process development capable of filling the electric power sector shortage regarding voltage non-conformities identification in electric distribution power grid accounting for loads dynamic behavior at medium and low voltages. Actual distribution power grid data are used, with georeferencing to signal voltage transgressions locations, generate a report with voltage transgression indices and financial reimbursement values provided by legislation. The methodology compares regulatory requirements and makes available in software some possible actions in an attempt to adjust voltage levels, avoiding inconvenience and penalties for energy utilities providers. The method involves a data extractor construction for electricity provider company’s databases, computer simulations and comparison of obtained results with values established in electricity quality control standards. Thus, finding non-conformity locations and determining network adjustments to correct... [more]

This paper presents three new and improved non-isolated topologies of quadratic boost converters (QBC). Reduced voltage stress across switching devices and high voltage gain with single switch operation are the main advantages of the proposed topologies. These topologies utilize voltage multiplier cells (VMC) made of switched capacitors and switched inductors to increase the converter’s voltage gain. The analysis in continuous conduction mode is discussed in detail. The proposed converter’s voltage gain is higher than the conventional quadratic boost converter, and other recently introduced boost converters. The proposed topologies utilize only a single switch and have continuous input current and low voltage stress across switch, capacitors, and diodes, which leads to the selection of low voltage rating components. The converter’s non-ideal voltage gain is also determined by considering the parasitic capacitance and ON state resistances of switch and diodes. The efficiency analysis in... [more]

In this study, we use the data of Polish typical meteorological years and 15 transposition models to obtain global solar irradiance on sloped surfaces to calculate solar irradiance on external building partitions, solar gains, heating demands, and primary nonrenewable energy for heating and domestic hot water (EPH+W) of two typical Polish residential buildings, each for two variants in five locations. In relation to TMYs, annual solar gains were lower by −31% and −36% on average in a single and multifamily building, respectively, and the annual heating demands increased by 9% and 16%, respectively. Consequently, averaged EPH+W in relation to TMYs rose by 1.4 kWh/m2 and 4.5 kWh/m2, respectively. The mean differences between TMYs and the new method from the recently published EN-ISO 52010 standard for test Building 1 were 1.6 and 1.2 kWh/m2, for Variants 1 and 2, respectively. Similarly, for test Building 2, the mean differences were 5.1 kWh/m2 and 3.9 kWh/m2, respectively. This means th... [more]

This paper represents the results of experimental studies of physical modeling of the underground coal gasification process in terms of implementation of design and technological solutions aimed at intensification of a gasification process of thin coal seams. A series of experimental studies were performed in terms of a stand unit with the provided criteria of similarity to field conditions as well as kinetics of thermochemical processes occurring within a gas generator. Hard coal (high volatile bituminous coal) was selected as the raw material to be gasified, as that coal grade prevails in Ukrainian energy balance since it is represented by rather great reserves. Five blow types were tested during the research (air, air−steam, oxygen−steam, oxygen−enriched, and carbon dioxide and oxygen). As a result, the effect of tightness of a gas generator on the quantitative and qualitative parameters of coal gasification while varying the blow by reagents and changing the pressure in a reaction... [more]

Several studies have shown the synergetic benefits of combining various chemical enhanced oil recovery (CEOR) methods with engineered waterflooding (EWF) in both sandstones and carbonate formations. This paper compares the capillary desaturation tendency of various hybrid combinations of engineered water (EW) and CEOR methods with their conventional counterparts. Several coreflood experiments were conducted, including EW-surfactant flooding (EWSF), EW-polymer flooding (EWPF), EW-alkali-surfactant flooding (EWASF), EW-surfactant-polymer flooding (EWSPF), and EW-alkali-surfactant-polymer flooding (EWASP). Capillary numbers (Nc) and corresponding residual oil saturation (Sor) for each scenario are compared with capillary desaturation curves (CDC) of conventional CEOR methods from the literature. The results indicate that hybrid EW−CEOR methods have higher capillary desaturation tendency compared to conventional methods. The capillary numbers obtained by standalone polymer flooding (PF) ar... [more]

Topological optimization is an innovative method to realize the lightweight design. This paper proposes a hybrid topology optimization method that combines the SIMP (solid isotropic material with penalization) method and genetic algorithm (GA), called the SIMP-GA method. In the method, SIMP is used to update the chromosomes, which can accelerate convergence. The filtering scheme in the SIMP method can filter unconnected elements to ensure the connectivity of the structure. We studied the influence of varying the filtering radius on the optimized structure. Simultaneously, in the SIMP-GA method, each element is regarded as a gene, which controls the population number to a certain extent, reduces the amount of calculation, and improves the calculation efficiency. The calculation of some typical examples proves that the SIMP-GA method can obtain a better solution than the gradient-based method. Compared with the conventional genetic algorithm and GA-BESO (Bi-directional Evolutionary Struc... [more]

The optimization of the energy portfolio for a small, open, landlocked economy with rather limited fossil resources is a complex task because it must find a long-range, sustainable balance between the various goals of society under the constant pressure of different interest groups. The opinions of independent, informed experts could be an essential input in the decision-making process. The goal of this research was to determine the relative importance of the values and goals potentially accompanying projects, based on the utilization of bioenergy. The current research is based on a wide-ranging survey of 65 non-partisan experts, applying the Pareto analytic hierarchy process to ensure the unbiased prioritization of project segments. The results of the survey put a spotlight on the importance of the economic role of bioenergy projects. Contrary to previous expectations and considerations, the social functions of these projects have hitherto been given relatively little importance. The... [more]

Insulators play a significant role in high-voltage transmission lines, and detecting insulator faults timely and accurately is important for the safe and stable operation of power grids. Since insulator faults are extremely small and the backgrounds of aerial images are complex, insulator fault detection is a challenging task for automatically inspecting transmission lines. In this paper, a method based on deep learning is proposed for insulator fault detection in diverse aerial images. Firstly, to provide sufficient insulator fault images for training, a novel insulator fault dataset named “InSF-detection” is constructed. Secondly, an improved YOLOv3 model is proposed to reuse features and prevent feature loss. To improve the accuracy of insulator fault detection, SPP-networks and a multi-scale prediction network are employed for the improved YOLOv3 model. Finally, the improved YOLOv3 model and the compared models are trained and tested on the “InSF-detection”. The average precision (... [more]

Wind turbines are often placed in complex terrains, where benefits from orography-related speed up can be capitalized. However, accurately modeling the wind resource over the extended areas covered by a typical wind farm is still challenging over a flat terrain, and over a complex terrain, the challenge can be even be greater. Here, a novel approach for wind resource modeling is proposed, where a linearized flow model is combined with a machine learning approach based on the k-nearest neighbor (k-NN) method. Model predictors include combinations of distance, vertical shear exponent, a measure of the terrain complexity and speedup. The method was tested by performing cross-validations on a complex site using the measurements of five tall meteorological towers. All versions of the k-NN approach yield significant improvements over the predictions obtained using the linearized model alone; they also outperform the predictions of non-linear flow models. The new method improves the capabilit... [more]

Efforts to tackle climate change are taking place on multiple fronts. This includes trade, an increasingly important defining feature of the global economy. In recent years, free trade agreements (FTAs) have become the primary mechanism of trade policy and diplomacy. This study examines the development of climate action measures in FTAs and discusses what difference they can make to tackling climate change. Its primary source research is based on an in-depth examination of FTAs in force up to 2020. This paper is structured around a number of research questions forming around three main inter-related areas of enquiry. Firstly, to what extent are these provisions in FTAs essentially derivative of energy’s connections with climate change, and thus part of a wider trade−climate−energy nexus? Secondly, what kinds of climate action are FTAs specifically promoting, and how effective a potential positive impact may we expect these to have? Thirdly, are certain climate action norms being promot... [more]

As SDG7-related interventions seek to transform access to clean energy, this paper presents an analysis of both a previous transformative intervention (Lighting Africa) and a theoretical approach to understanding how such transformations can be achieved in the Global South (socio-technical innovation system, STIS, building). The paper makes four contributions. First, it tests the extent to which the STIS-building concept is useful in understanding and conceptualising how Lighting Africa transformed the market for solar lanterns in Kenya from an estimated market size of 29,000 lamps in 2009 to one where 680,000 Lighting Africa certified lamps were sold in Kenya by the end of the Programme in 2013. Second, it presents the most in-depth analysis of Lighting Africa that we are aware of to date. Third, it presents a conceptual framework that illustrates the Lighting Africa approach, providing a framework for future policy interventions aiming to transform access to clean energy technologies... [more]

This paper proposes a novel method for planning active distribution networks (ADNs) with the integration of an active network management (ANM) scheme using coordinated voltage control (CVC) through on-load tap changer (OLTC) transformers. The method was formulated as a security-constrained optimal power flow (SCOPF) problem to minimize total operational costs, which maximizes the utilization of renewable distributed generators (DGs) over a planning horizon. The ANM scheme was applied using OLTC to ensure safe operation and reduce voltage violations in the network. To analyse the impact of ANM, the planning problem was examined both with and without the ANM scheme. Moreover, SCOPF, considering the N-1 line contingency analysis and multi-DG configuration, was implemented to analyse the feasibility of the proposed method and the advantages of ANM under contingency situations. The method was validated on a weakly-meshed 16-bus UK generic distribution system (UKGDS). The results showed that... [more]

The paper presents the existing verification methods for control algorithms in power electronics systems, including the application of model checking techniques. In the industry, the most frequently used verification methods are simulations and experiments; however, they have to be performed manually and do not give a 100% confidence that the system will operate correctly in all situations. Here we show the recent advancements in verification and performance assessment of power electronics systems with the usage of formal methods. Symbolic model checking can be used to achieve a guarantee that the system satisfies user-defined requirements, while statistical model checking combines simulation and statistical methods to gain statistically valid results that predict the behavior with high confidence. Both methods can be applied automatically before physical realization of the power electronics systems, so that any errors, incorrect assumptions or unforeseen situations are detected as ear... [more]

The optimal design of the thrust vector control system of solid rocket motors (SRMs) is discussed. The injection of a supersonic underexpanded gas jet into the diverging part of the rocket engine nozzle is considered, and multiparameter optimization of the geometric shape of the injection nozzle and the parameters of jet injection into a supersonic flow is developed. The turbulent flow of viscous compressible gas in the main nozzle and injection system is simulated with the Reynolds-averaged Navier−Stokes (RANS) equations and shear stress transport (SST) turbulence model. An optimization procedure with the automatic generation of a block-structured mesh and conjugate gradient method is applied to find the optimal parameters of the problem of interest. Optimization parameters include the pressure ratio of the injected jet, the angle of inclination of the injection nozzle to the axis of the main nozzle, the distance of the injection nozzle from the throat of the main nozzle and the shape... [more]

Finite Control-Set Model Predictive Control (FCS-MPC) appears as an interesting alternative to regulate multiphase electric drives, thanks to inherent advantages such as its capability to include new restrictions and fast-transient response. Nevertheless, in industrial applications, FCS-MPC is typically discarded to control multiphase motors because the absence of a modulation stage produces a high harmonic content. In this regard, multi-vectorial approaches are an innovative solution to improve the electric drive performance taking advantage of the implicit modulator flexibility of Model Predictive Control (MPC) strategies. This work proposes the definition of a new multi-vectorial set of control actions formed by a couple of adjacent large voltage vectors and a null voltage vector with an adaptative application ratio. The combination of two large voltage vectors provides minimum x-y current injection whereas the application of a null voltage vector reduces the active voltage producti... [more]

With the energy crisis and the constant blackout in the Mozambique Power Company grid, the option of applying solar photovoltaic (PV) systems has been one of the most used alternatives in the neighborhoods of the Maputo region. However, inefficient power delivery caused by unproper sizing and installation of stand-alone solar PV systems has been contributing to the low utilization of solar energy potential in the Maputo region. The optimal sizing and installation of the solar PV system is addressed to evaluate the influence of installation and operation parameters on the power output of PV modules. In this topic, PV modules parameters such as cell temperature, the module’s slope and azimuth angles, the losses caused by excessive heating of the module cells, shadows and dust on the PV module and the cooling process at the back of the module are assessed in order to find out the consequence of inadequate installation and operation parameters of solar PV systems in the Maputo region. The... [more]

Accurate component analytical solution is very important to gas path prognostics and diagnostics of a gas turbine. However, due to the highly complex nonlinear behavior of component performance, the nonlinear relationships between various key parameters still should be further studied. For this purpose, a new component analytical solution is proposed to enhance the current adaptation and diagnostics scheme of gas turbines. First, the tuning factors are defined to construct the enhanced component analytical solution and identify the nonlinear behaviors more accurately. Second, a sensitivity analysis for tuning factors is performed to understand the effect of each factor on the shape of component maps. Then, a particle swarm optimization algorithm is used to capture the optimal tuning factors, and then the performance adaptation is implemented. Finally, the proposed method has been validated with normal field data and fouling fault field data of a PGT25+ gas turbine. Compared with two ea... [more]

The presented work employs the multiple random feature kernel mean p-power algorithm (MRFKMP) for the voltage source converter (VSC) control of a three-phase four-wire grid-tied dual-stage photovoltaic-hybrid energy storage system (HESS) to achieve multiple objectives during various induced dynamic conditions. The proposed control enables the VSC to accomplish manifold goals, i.e., reactive power compensation, power quality enhancement, load, power balancing at common coupling point and grid voltage balancing during unity power factor mode of operation. The proposed system is scrutinized under steady-state and numerous dynamic states such as irradiation variation, specified power mode, abnormal grid voltage, load, and grid voltage unbalancing. The seamless control facilitates the swift resynchronization of the grid as well as maintaining stability during islanding and re-synchronization operations while satisfying the necessary load requirements. The associated HESS consisting of batte... [more]

This paper presents an efficient harmonic detection for real-time generation of the reference current fed to a shunt active power filter using the ADALINE neural network. This proposed method is a single layer with 101 nodes generating the coefficients referred to as weights of the reference current model. It effectively overcomes the drawback of the current technology, which is instantaneous power theory (PQ). The proposed method was implemented on the TMS320F28335 DSP board and tested against MATLAB with Simulink as a hardware-in-loop (HIL) structure. This method gives a good performance by producing a precise reference current in a short period with uncomplicated calculation. It also efficiently can eliminate individual harmonic current. The achieved percentage of total harmonic distortion (%THD) in the current is reduced following the IEEE standard, while the power factor can be maintained to unity.

Phase shifting transformers (PSTs) are currently widely used in power systems to control power flow. In this manuscript, the results of the asymmetrical PST (APST) with the in-phase PST (called asymmetrical controllable PST-ACPST) were compared, allowing to control both longitudinal and quadrature voltage. The MATLAB simulation model of the ACPST was built to obtain influence of PST in selected models for selected parameters. Then the 30A laboratory PST device was built in the laboratory. The parameters of the MATLAB model were then adjusted to parameters of the real life PST model. This allowed verifying the results of the real life and computer simulations. Based on the ACPST simulation model, the APST model was built; for the given work conditions, the influence of both PSTs were compared. APST construction always resulted in higher output voltage than the input one. ACPST achieved the same power transfer for the lower output PST voltage, which is its main advantage. This dependency... [more]

This presented paper focuses on the design and evaluation of the concept of concentrated solar heaters for segmental heat accumulators, which are designed to cover the energy needs of selected communities in terms of food preparation without the need for fossil fuels, which have a negative impact not only on the climate but especially on health. The proposed device is based on the traditional method of food preparation in the so-called earth oven; however, the fire-heated stones are replaced with heat accumulators heated by solar radiation. This approach eliminates the need to change common and long-term habits of food preparation for selected communities. The device connects solar vacuum heat pipes, a solar radiation concentrator, and heat accumulators. The concept was evaluated based on computational fluid dynamics (CFD) analysis with the use of a transient simulation of selected operating situations in three geographical locations. The results showed a significant temperature increa... [more]

The verification of the blasting parameters of Ammonium Nitrate Fuel Oil (ANFO) with the addition of microstructured charcoal (MC) produced by destructive wood distillation was performed. Additional investigation of specific surface and pore distribution by the nitrogen adsorption of the two granulations of MC was also carried out. High-resolution scanning electron microscopy was used for morphology evaluation and revealed smoothening of the initially developed external surface of carbon with intensive milling. In addition, the analysis of the thermal properties of the studied samples (TG/DSC) indicated that the size of the microstructured charcoal additives influenced the decomposition temperature of the prepared materials. The explosives containing microstructured charcoal grains of −90 μm underwent decomposition at lower temperatures in comparison with those containing higher sizes of microstructure charcoal grains (−1.18 mm), for which the decomposition temperature reached 292 °C.... [more]