A Kentucky coal sample treated by microwave irradiation (MI) combined with sodium hydroxide solution was performed using a thermo-gravimetric analyzer (TGA) coupled to a Fourier transform infrared spectrometer (FTIR). The combustion properties and structural changes of coal under different conditions were investigated and compared. The results show that the desulfurization efficiency of coal samples increases with the increase of sodium hydroxide solution concentration. Microwave irradiation can significantly improve the desulfurization efficiency. The whole combustion process of the treated coal sample becomes longer; the combustion performance becomes worse. The total mass loss of coal treated samples is significantly reduced, and the temperature corresponding to the maximum weight loss rate decreases with the increase of sodium hydroxide concentration. The infrared spectra of the coal samples treated with microwave and 5% sodium hydroxide solution were basically unchanged, while the... [more]

The global focus on the use of renewable energy resources was mainly reignited by the signing of the Kyoto Protocol Agreement in 1997. Since then, the world has seen a great deal of progress in terms of the production and consumption of renewable energy. This in turn is rapidly powering economic growth and social development around the globe. Contrary to popular belief, the use of renewable energy is not limited to developed countries only. The developing countries are also rapidly endorsing renewable energy as a vital engine of economic growth and societal development. In this regard, even though renewable energy production and consumption are in their infancy in BRICS, these countries are taking concrete steps towards the development of renewable energy resources. The results of previous studies have indicated that with an increase in the GDP of a country its carbon footprint also tends to increase; the Brazil, Russia, India, China, and South Africa (BRICS) countries are no exception... [more]

This study was performed to investigate the distribution characteristics of airborne bacteria emitted from swine manure composting plants. The types of swine manure composting plants selected for the survey in this study were as follows: screw type, rotary type, and natural dry type. Mean levels of airborne bacteria in swine manure composting plants were 7428 (±1024) CFU m−3 for the screw type, 3246 (±1407) CFU m−3 for the rotary type, and 5232 (±1217) CFU m−3 for the natural dry type, respectively. Based on the results obtained from this study, the swine manure composting plant operated by screw type showed the highest concentration of airborne bacteria, followed by the natural dry type and rotary type. The monthly concentration of airborne bacteria was the highest in August and the lowest in November, regardless of the type of swine manure composting plant. The respirable size of airborne bacteria accounted for about 50% of the total. The ratio of respirable to the total quantity of... [more]

The intensive exploitation of resources on a global level has led to a progressive depletion of mineral reserves, which were proved to be insufficient to meet the high demand for high-technological devices. On the other hand, the continuous production of Waste from Electrical and Electronic Equipment (WEEE) is causing serious environmental problems, due to the complex composition of WEEE, which makes the recycling and reuse particularly challenging. The average metal content of WEEE is estimated to be around 30% and varies depending on the manufacturing period and brand of production. It contains base metals and precious metals, such as gold and palladium. The remaining 70% of WEEEs is composed of plastics, resins, and glassy materials. The recovery of metals from WEEEs is characterized by two main processes well represented by the literature: Pyrometallurgy and hydrometallurgy. Both of them require the pre-treatment of WEEEs, such as dismantling and magnetic separation of plastics. In... [more]

Natural adsorbents as low-cost materials have been proved efficient for water remediation and have significant capacity for the removal of certain chemicals from wastewater. The present investigation aimed to use Citrullus colocynthis seeds (CCSs) and peels (CCPs) as an efficient natural adsorbent for methylene blue (MB) dye in an aqueous solution. The examined biosorbents were characterized using surface area analyzer (BET), scanning electron microscope (SEM), thermogravimetric analyzer (TGA) and Fourier transform infra-red (FT-IR) spectroscopy. Batch adsorption experiments were conducted to optimize the main factors influencing the biosorption process. The equilibrium data for the adsorption of MB by CCSs were best described by the Langmuir isotherm followed by the Freundlich adsorption isotherms, while the equilibrium data for MB adsorption by CCPs were well fitted by the Langmuir isotherm followed by the Temkin isotherm. Under optimum conditions, the maximum biosorption capacity an... [more]

Wheat pasta is one of the most important cereal products and is becoming increasingly popular worldwide because of its convenience, simple formulation, long shelf life, and high energetic value. Wheat pasta is usually obtained from refined flour rich in carbohydrates but with low content of phytochemicals, micronutrients, and fibre. The increased demand of consumers for healthy foods has generated interest among both researchers and food producers in developing functional food products. This review showcases the current trends in pasta fortification. Changes in the nutritional value, cooking quality, sensory attributes, and antioxidant properties of durum and common wheat pasta enriched with both plant and animal raw materials are discussed.

In this study, the convective mode heat transfer phenomena of bi-phase elasticoviscous (non-Newtonian) nanofluid is quantified by forcefully flowing it through a specially designed microchannel test section. The test section, which is rectangularly cross-sectioned and annexed internally with cylindrical needle ribs is numerically investigated by considering the walls to be maintained at a constant temperature, and to be susceptible to a magnetizing force field. The governing system-state equations are numerically deciphered using control volume procedure and SIMPLEC algorithm. With the Reynolds number (Re) varying in the turbulent range from 3000 to 11,000, the system-state equations are solved using the Eulerian−Eulerian monofluid Two-Phase Model (TPM). For the purpose of achieving an apt geometry based on the best thermo-hydraulic behavior, an optimization study must be mandatory. The geometry of the cylindrical rib consists of h (10 × 10−3, 15 × 10−3, 20 × 10−3), p (1.0, 1.5), and d... [more]

The authors of the present paper sought to conduct a numerical study on the convection heat transfer, along with the radiation and entropy generation (EGE) of a nanofluids (NFs) in a two and three-dimensional square enclosure, by using the FVM. The enclosure contained a high-temperature blade in the form of a vertical elliptical quadrant in the lower corner of the enclosure. The right edge of the enclosure was kept at low temperature, while the other edges were insulated. The enclosure was subjected to a magnetic field (MGF) and could be adjusted to different angles. In this research, two laboratory relationships dependent on temperature and volume fraction were used to simulate thermal conductivity and viscosity. The variables of this problem were Ra, Ha, RAP, nanoparticle (NP) volume fraction, blade aspect ratio, enclosure angles, and MGF. Evaluating the effects of these variables on heat transfer rate (HTR), EGE, and Be revealed that increasing the Ra and reducing the Ha could incre... [more]

Metal magnesium (Mg) fuels have been widely used in rocket propellants. The combustion study on individual Mg microparticles is crucial to the in-depth unveiling of the combustion mechanism of Mg-based propellants. In this paper, a new experimental setup was proposed to directly observe the combustion of individual micron-sized Mg particles, based on laser ignition and microscopic high-speed cinematography. The combustion process of individual Mg microparticles could be directly and clearly observed by the apparatus at high temporal and spatial resolutions. Individual Mg microparticles took gas phase combustion, and mainly underwent four stages: expansion, melting, gasification, ignition, and combustion. The ignition delay time and total combustion time had an exponential decay on the particle diameter, and they had a linear decay on the ignition power density. The melting took a dominant role in the whole burnout time. The gas-phase combustion flame seemed thick, inhomogeneous, and ri... [more]

The implementation of scrap recovery activities has been shown to improve the financial performance of many firms, and this kind of circular economy (CE) is particularly evident in industries with green manufacturing (GM). In this paper, we consider an imperfect multiple-stage production system that manufactures paired products made from mixed materials containing scrap returns, in which the scrap returns are converted from defective products. The feed rates of scrap returns for two products are different, and the product with the higher feed rate is placed in the second order of the process to avoid unlimited accumulation of scrap returns. The proposed problem is formulated as a joint economic order quantity (EOQ) and economic production quantity (EPQ) model aimed at cost minimization. The decision variables of the proposed model include the production run time of two products, order quantity of new material, and the extent of investment in converted equipment. We also prove that the... [more]

The COVID-19 pandemic has boosted the growth of the online food delivery (OFD) market in every corner of the world. In Vietnam, the food delivery service is rising rapidly and opening a large gateway of opportunities for numerous OFD platforms, also making it a competing business market in this country. Thus, to keep up with the ever-changing market dynamics, there are numerous measures and dimensions for the OFD entrepreneurs to take into consideration towards sustainable development. This paper’s objective is to evaluate major OFD companies in Vietnam based on a comprehensive set of criteria, which are social and environmental criteria (healthy and safety, information security, and environmental impact), economic criteria (delivery cost, operational capability, and risk management), service quality (order fulfillment, delivery speed, convenience of payment, online/offline service level, and customer feedback), and technology (web design, real-time tracking systems, and marketing tech... [more]

The main objective of this study was firstly to investigate the influence of freezing process parameters on the formation of the internal structure of frozen coffee granules. It was investigated how these frozen internal structures affect the drying kinetics during freeze-drying. A design of experiment study was carried out using the response surface method to quantify the influence of the freezing step that occurs in a scraped surface heat exchanger (SSHE). Therefore, the coffee extract at a concentration of 30% w/w is entering the SSHE as a liquid and gets partially crystallized up to a weight-based ice content of 0.364. During this step, the influence of factors like cooling temperature, scraper rotation speed and temperature cycles on ice crystal structure was investigated. In a second freezing step, the influence of freezing rates during hardening of the product by air-blast freezing is investigated, where the freezing rate is significantly affected by the cake thickness. The prod... [more]

This work introduces three eco-friendly UV spectrophotometric methods for the simultaneous estimation of Paracetamol, Aceclofenac and Eperisone Hydrochloride in pharmaceutical tablet formulation. The procedures employed were simultaneous equation method and multivariate chemometric methods with phosphate buffer pH 7.80 as diluent. The simultaneous equation method encompasses absorbance measurement at three different wavelengths (λmax of the drugs). It exhibits linearity between 12−18 µg mL−1 for paracetamol, 3.69−5.53 µg mL−1 for Aceclofenac, and 2.76−4.15 µg mL−1 Eperisone hydrochloride. The results obtained for accuracy and precision by the simultaneous equation method were within the permissible limits. Principal component regression and partial least squares were the tools used for chemometric methods. The calibration set and prediction set were constructed, and the UV spectra were recorded in zero order mode, further subjected to chemometric analysis. The % recoveries obtained for... [more]

Industries are nowadays not only expected to produce goods and provide services, but also to do this sustainably. What qualifies a company as sustainable implies that its activities must be defined according to the social and ecological responsibilities that are meant to protect the society and the environment in which they operate. From now on, it will be necessary to consider and measure the impact of industrial activities on the environment, and to do so, one key parameter is the carbon footprint. This paper demonstrates the utility of the LCI as a tool for immediate application in industries. Its application shall facilitate decision making in industries while choosing amongst different scenarios to industrialize a certain product with the lowest environmental impact possible. To achieve this, the carbon footprint of a given product was calculated by applying the LCI method to several scenarios that differed from each other only in the supply-chain model. As a result of this LCI ca... [more]

The recently defined and yet rather new topic of healthy aging is attracting more attention worldwide. As the world population is getting older, it is rapidly becoming essential to develop and maintain functional abilities at older age and develop mechanisms to protect the senior population from chronic diseases. One of the most effective components, as well as processes associated with aging, is the recently discovered and Nobel prize-awarded—nitric oxide (NO) (as a signaling molecule), which, followed by later discoveries, showed to have a positive metabolic, immunological, and anti-inflammatory effect. Nitrates are one of the most debated topics of the last decade in the scientific community due to their pathways involved in the production of nitric oxide. Thus, the objective of this study is to evaluate the effect of different potassium nitrate concentrate supplementation on Drosophila melanogaster longevity imitating a human carbohydrate-based diet with relationship to possible ca... [more]

The deflector and the rod bank are commonly used to optimize flue gas distribution in the original spray tower (OST) of a wet flue gas desulfurization system (WFGD). In this paper, the internal optimization mechanism of the deflector desulfurization spray tower (DST) and the rod bank desulfurization spray tower (RBST) are studied. Based on the Euler−Lagrange method, the standard k-ε turbulence model, an SO2 absorption model and a porous media model, the numerical simulation of the desulfurization spray tower is carried out with the verification of the model rationality. The results show that there are gas-liquid contact intensification effects in DST and RBST. Compared with OST, gas-liquid contact intensification enhances the heat and mass transfer effects of DST and RBST. The temperature difference between inlet and outlet of flue gas increased by 3.3 K and the desulfurization efficiency of DST increased by 1.8%; the pressure drop decreased by 37 Pa. In RBST, the temperature differenc... [more]

With the advent of the first pandemic wave of Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2), the question arises as to whether the spread of the virus will be controlled by the application of preventive measures or will follow a different course, regardless of the pattern of spread already recorded. These conditions caused by the unprecedented pandemic have highlighted the importance of reliable data from official sources, their complete recording and analysis, and accurate investigation of epidemiological indicators in almost real time. There is an ongoing research demand for reliable and effective modeling of the disease but also the formulation of substantiated views to make optimal decisions for the design of preventive or repressive measures by those responsible for the implementation of policy in favor of the protection of public health. The main objective of the study is to present an innovative data-analysis system of COVID-19 disease progression in Greece and he... [more]

Process fault is one of the main reasons that a system may appear unreliable, and it affects the safety of a system. The existence of different degrees of noise in the industry also makes it difficult to extract the effective features of the data for the fault diagnosis method based on deep learning. In order to solve the above problems, this paper improves the deep belief network (DBN) and iterates the optimal penalty term by introducing a penalty factor, avoiding the local optimal situation of a DBN and improving the accuracy of fault diagnosis in order to minimize the impact of noise while improving fault diagnosis and process safety. Using the adaptive noise reduction capability of an adaptive lifting wavelet (ALW), a practical chemical process fault diagnosis model (ALW-DBN) is finally proposed. Then, according to the Tennessee−Eastman (TE) benchmark test process, the ALW-DBN model is compared with other methods, showing that the fault diagnosis performance of the enhanced DBN com... [more]

In recent years, lipid-based nanosystems have emerged as a promising class of nanocarriers for encapsulating many active agents. Solid lipid nanoparticles (SLNs) provide good stability (colloidal as well as physical) and high biocompatibility. Appropriate design of the carrier structure through a selection of components and preparation methods allows us to obtain formulations with desired physicochemical parameters and biological properties. The present contribution has been carried out to investigate SLNs containing biocompatible phosphatidylcholine mixed with non-ionic surfactant Tween 60 as stabilizing agents. The internal lipid phase consisted of glyceryl monostearate was confirmed as safe for drug delivery by the Food and Drug Administration. The SLNs were fabricated by ultrasonic-nanoemulsification method. The preparation process was optimized in regard to variable parameters such as ultrasonication time and used amplitude and number of cycles. The sizes of the studied nanopartic... [more]

Many studies have found that FDI can reduce the pollutant emissions of host countries. At the same time, the intensity of environmental regulation would affect the emission reduction effect of FDI in the host country. This study aims to reveal the internal mechanisms of this effect. Specifically, this paper studies the impact of FDI on technological innovation in China’s industrial sectors from the perspective of technology transactions from 2001 to 2019, and then analyzes whether the intensity of environmental regulation can promote the relationship. Results indicate that FDI promotes technological innovation through technology transactions. In addition, it finds that the intensity of environmental regulation significantly positively moderates the relationship between FDI and technological innovation, which is achieved by positively moderating the FDI−technology transaction relationship. Regional heterogeneity analysis is further conducted, and results show that in the eastern and wes... [more]

Global climate change is putting humanity under pressure, which in many areas poses an unprecedented threat to society as we know it. In an effort to mitigate its effects, it is necessary to reduce the overall production of greenhouse gases and thus, dependence on fossil fuels in all areas of human activities. The presented paper deals with an evaluation of energy mix of the Slovak Republic and four selected neighboring countries in the context of achieving their carbon neutral or carbon negative future. The development of the evaluated energy mixes as well as greenhouse gas emissions is presented from a long-term perspective, which makes it possible to evaluate and compare mutual trends and approaches to emission-free energy sectors.

This study investigated the impact of Parinari curatellifolia peel flour on the nutritional, physical and antioxidant properties of formulated biscuits. Biscuits enriched with 5%, 10%, 15% and 20% of Parinari (P). curatellifolia peel flour were formulated and characterised. Thermal, physicochemical, polyphenolic compounds and antioxidant properties of flour and biscuits were determined. The incorporation of P. curatellifolia peel flour significantly increased (p < 0.05) thermal properties (onset, peak and conclusion temperatures) of flour. However, enthalpy of gelatinisation, viscosity and pH of flour samples decreased. Nutritional analysis revealed an increase in ash (0.74% to 2.23%) and crude fibre contents (0.39% to 2.95%) along with an increase of P. curatellifolia peel flour levels. Protein content and carbohydrates decreased while moisture content was insignificantly affected by the addition of P. curatellifolia peel flour. The L*, b* values and whiteness index of formulated b... [more]

Biopolymers are a promising alternative to petroleum-based plastic raw materials. They are bio-based, non-toxic and degradable under environmental conditions. In addition to the homopolymer poly(3-hydroxybutyrate) (PHB), there are a number of co-polymers that have a broad range of applications and are easier to process in comparison to PHB. The most prominent representative from this group of bio-copolymers is poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). In this article, we show a new kinetic model that describes the PHBV production from fructose and propionic acid in Cupriavidus necator (C. necator). The developed model is used to analyze the effects of process parameter variations such as the CO2 amount in the exhaust gas and the feed rate. The presented model is a valuable tool to improve the microbial PHBV production process. Due to the coupling of CO2 online measurements in the exhaust gas to the biomass production, the model has the potential to predict the composition an... [more]

Based on the panel data of 224 prefecture-level and above cities in China from 2003 to 2016, this paper empirically studies the impact of urban sprawl on air pollution and introduces a mediating effect model to test the mediating role of vehicle ownership concerning the impact of urban sprawl on air pollution. The research in this paper arrives at three conclusions. First, urban sprawl has a significant positive effect on air pollution, and this conclusion is still valid after solving the endogeneity problem and conducting a robustness test. Second, the results of mediating effect test show that urban sprawl indirectly affects air pollution through the partial mediating effect of vehicle ownership. By removing the mediating effect, urban sprawl has a significant negative impact on air pollution, indicating that the mediating effect of vehicle ownership is higher concerning the impact of urban sprawl on air pollution. Third, further panel quantile regression results show that the higher... [more]

The impeller blades of ceramic slurry pumps are usually very thick for the purpose of prolonging the service life. In this paper, numerical simulations and wear test were conducted to investigate the influence of blade thickness on the solid−liquid two-phase flow and impeller wear in a ceramic centrifugal slurry pump. The wear test was conducted for CFD validation. The numerical results show that the incident angles of solid particles increase with increasing blade thickness, which results in larger wrap angles of the solid particle trajectories. The increasing wrap angles of the solid particle trajectories offset the region that the collisions between the blade pressure side and the solid particles side take place towards the impeller exit and lead to more impacts between the solid particles and the blade suction side. The numerical results are in good accordance with the wear pattern of the tested impellers, which demonstrates that the numerical method adopted in this paper is predic... [more]