Since the early stages of the Internet-of-Things (IoT), one of the application scenarios that have been affected the most by this new paradigm is mobility. Smart Cities have greatly benefited from the awareness of some people’s habits to develop efficient mobility services. In particular, knowing how people use public transportation services and move throughout urban infrastructure is crucial in several areas, among which the most prominent are tourism and transportation. Indeed, especially for Public Transportation Companies (PTCs), long- and short-term planning of the transit network requires having a thorough knowledge of the flows of passengers in and out vehicles. Thanks to the ubiquitous presence of Internet connections, this knowledge can be easily enabled by sensors deployed on board of public transport vehicles. In this paper, a Wi-Fi-based Automatic Bus pAssenger CoUnting System, named iABACUS, is presented. The objective of iABACUS is to observe and analyze urban mobility by... [more]

The modern distribution networks under the smart grid paradigm have been considered both interconnected and reliable. In grid modernization concepts, the optimal asset optimization across a certain planning horizon is of core importance. Modern planning problems are more inclined towards a feasible solution amongst conflicting criteria. In this paper, an integrated decision-making planning (IDMP) approach is proposed. The proposed methodology includes voltage stability assessment indices linked with loss minimization condition-based approach, and is integrated with different multi-criteria decision-making methodologies (MCDM), followed by unanimous decision making (UDM). The proposed IDMP approach aims at optimal assets sitting and sizing in a meshed distribution network to find a trade-off solution with various asset types across normal and load growth horizons. An initial evaluation is carried out with assets such as distributed generation (DG), photovoltaic (PV)-based renewable DG,... [more]

Unmanned Aerial Vehicles (UAVs) have been regarded as a promising means to reshape future wireless communication systems. In this paper, we consider how to plan the trajectory of a solar-powered UAV under a cloudy condition to secure the communication between the UAV and a target ground node against multiple eavesdroppers. We propose a new 3D UAV trajectory optimization model by taking into account the UAV energy consumption, solar power harvesting, eavesdropping and no-fly zone avoidance. A Rapidly-exploring Random Tree (RRT) method is developed to construct the UAV trajectory. Computer simulations and comparisons with a baseline method demonstrate that the proposed method is able to produce trajectories to ensure the valid wireless communication link with the ground node and prevent eavesdropping.

This paper presents several applications of Wien Automatic System Planning (WASP) tool to address specific modeling challenges encountered in power system expansion planning problems. Although WASP has been used by power system planners around the world for many decades, its standard formulation does not allow the user to explicitly model many situations that can occur in realistic power systems. Examples of such situations include dual-fuel plants, options for electricity exports, energy exchange agreements with neighboring systems, and considering large generating units as candidates in relatively small-size systems. A number of alternative modeling solutions are proposed in the paper based on the authors’ long-term experience in carrying out generation expansion studies for electricity systems of various types and sizes. These solutions demonstrate the flexibility of using WASP to model atypical features of power systems.

In the context of the energy transition, energy system planning is becoming increasingly relevant for decentralized systems. Motivated by the strong increase of publications on municipal energy system planning (MESP), these studies are subjected to a bibliometric analysis in this paper. The 1235 articles, which are based on the Web of Science database, are examined using the R-tool bibliometrix. The study shows that China is the most important contributor with 225 articles, followed by the USA (205) and Germany (120). Most cross-country collaborations were conducted between China and Canada, focusing mainly on uncertainties in MESP. Among the institutions, the North China Electric Power University is responsible for most articles (42). The core journals on MESP are Energy, Applied Energy, Energy Policy, Energies and Renewable Energy, which published 37% of the 1235 articles. Publications on MESP focus on renewable energies, optimization and hybrid energy systems. Furthermore, district... [more]

Pruning residues could represent an important biomass resources for energy production. Only in Italy it has been estimated that an annual quantity of biomass of over 2600 kt of dry matter could be obtained from olive residues. Several machines developed for pruning harvesting are available in the market, most of which are tractor-driven, while limited knowledge is available on performance, quality of work and costs of harvesting logistics based on stationary chippers. The aim of the present paper is to analyze machine performance of a forestry stationary chipper applied to pruning harvesting for what concerns work productivity, quality of the comminuted product and harvesting operating costs. This system is actually applied by Fiusis Company, an Italian enterprise which manages a biomass power plant exclusively powered by olive trees’ pruning residues, and it has never been analyzed in literature. The results obtained showed consistent work productivity, which resulted the highest ever... [more]

Locating and planning charging stations for Low-Emission Vehicles (LEVs) such as Battery Electric Vehicle (BEV), Hydrogen Fuel-Cell Vehicle (HFCV), and Natural Gas Vehicle (NGV) are becoming increasingly important for LEV users, government, and the automobile industry. Conventional planning approach of charging station usually plans single functional charging station that can only serve one kind of LEVs, and other factors such as fuel type, driving range, initial fuel tank level, and refueling time of the LEV are less considered in the planning stage. In this article, we propose a bi-level planning model to locate and size Multi-Functional Charging Station (MFCS) which can recharge BEV, HFCV, and NGV at the same time in a medium-sized city with different functional areas (e.g., residential area, industrial area, CBD area). We also established a method for generating a daily route considering vehicle attributes and user habits, and we loaded these traveling data into the upper model to... [more]

Scheduled charging offers the potential for electric vehicles (EVs) to use renewable energy more efficiently, lowering costs and improving the stability of the electricity grid. Many studies related to EV charge scheduling found in the literature assume perfect or highly accurate knowledge of energy demand for EVs expected to arrive after the scheduling is performed. However, in practice, there is always a degree of uncertainty related to future EV charging demands. In this work, a Model Predictive Control (MPC) based smart charging strategy is developed, which takes this uncertainty into account, both in terms of the timing of the EV arrival as well as the magnitude of energy demand. The objective of the strategy is to reduce the peak electricity demand at an EV parking lot with PVarrays. The developed strategy is compared with both conventional EV charging as well as smart charging with an assumption of perfect knowledge of uncertain future events. The comparison reveals that the inc... [more]

Cities play a key role in driving the transition to sustainable energy. Urban areas represent between 60% and 80% of global energy consumption and are a significant source of CO2 emissions, making energy management at the urban scale an important area of research. Urban energy systems have a strong influence on the environment, economy, social dimensions and urban spatial planning. Energy consumption affects the urban microclimate, urban comfort, human health, and conversely, urban physical, economic and social characteristics affect the energy urban profile. In order to improve the quality of energy strategies, policies, and plans, local authorities need decision support tools, like energy potential mapping, which have risen significance in the last decades. Energy data are crucial for those tools. They can increase the quality and effectiveness of energy planning but also support the integration between energy and spatial planning. Energy data can also stimulate citizen engagement as... [more]

A model suitable to obtain where and when renewable energy sources (RES) should be allocated as part of generation planning in distribution systems is formulated. The proposed model starts from an existing two-stage stochastic mixed-integer linear programming (MILP) problem including investment and scenario-dependent operation decisions. The aim is to minimize photovoltaic and wind investment costs, operation costs, as well as total substation costs including the cost of the energy bought from substations and energy losses. A new Benders’ decomposition framework is used to decouple the problem between investment and operation decisions, where the latter can be further decomposed into a set of smaller problems per scenario and planning period. The model is applied to a 34-bus system and a comparison with a MILP model is presented to show the advantages of the model proposed.

Reliable transmission expansion planning is critical to power systems’ development. To make reliable and sustainable transmission expansion plans, numerous sources of uncertainty including demand, generation capacity, and fuel cost must be taken into consideration in both spatial and temporal dimensions. This paper presents a new approach to selecting a small number of high-quality scenarios for transmission expansion. The Kantorovich distance of social welfare distributions was used to assess the quality of the selected scenarios. A case study was conducted on a power system model that represents the U.S. Eastern and Western Interconnections, and ten high-quality scenarios out of a total of one million were selected for two transmission plans. Results suggested that scenarios selected using the proposed algorithm were able to provide a much more accurate estimation of the value of transmission plans than other scenario selection algorithms in the literature.

The Coefficient of Performance of an ordinary water-cooled chiller is presented as a relationship with the chiller load factor and cooling water temperature. However, the cooling water temperature fluctuates according to the processed heat of the cooling tower originating in the cooling energy of the chiller and to the outside temperature and humidity. It is therefore difficult to obtain the cooling water temperature under the processed-heat and weather conditions at the time of evaluation. This, in turn, makes it difficult to determine the Coefficient of Performance of a water-cooled chiller at the evaluation time. In this research, we formulated the Coefficient of Performance of a water-cooled chiller as a relationship with the chiller load factor and specific enthalpy of outside air. Specifically, we used the Number of Transfer Units (NTU) model of a cooling tower to calculate the cooling water temperature corresponding to the cooling-tower load factor targeting a counterflow coolin... [more]

This paper addresses economic aspects of heat savings in the context of strategic heat planning. The analysis uses the city of Aalborg, Denmark, as a case where municipalisation through a recent acquisition of a coal-fired cogeneration of heat and power (CHP) plant has made an update of a municipal strategic energy plan necessary. Combining datasets on buildings and insulation techniques with economic methods, we investigate how the local district heating tariff can be adapted to improve the conditions for heat savings and support the transition to lower supply temperatures in line with the requirements of future fourth generation district heating systems. The paper concludes that implementing a fully variable heat tariff scheme improves the financial incentive for heat savings, while also making the system development less vulnerable to fluctuations and shortages in capital markets. The paper supplements existing literature on heat savings with novelty in its approach and in its syste... [more]

The number of electric vehicles (EV) in the world has been increasing and is gaining momentum. The large-scale use of EVs in public life has initiated the need to establish EV battery charging services within the power system. Currently, EVs serve as a transportation tool and also as a flexible load. This publication examines the possibility of the owner of an electric vehicle choosing a battery recharging point, as well as of the involvement of several decision makers in the selection of a charging schedule. This problem is important because we assume that a significant proportion of EVs mainly use two parking spaces, one located close to the place of residence and another close to the workplace. We accept and prove that a car charging station can be created by the employer (company) and implemented in the best interests of the employer and the employee (EV owner). For that, a coalition between the company and the EV owner has to be formed. To support rational decisions, this study so... [more]

Heat pumps in combination with a photovoltaic system are a very promising option for the transformation of the energy system. By using such a system for coupling the electricity and heat sectors, buildings can be heated sustainably and with low greenhouse gas emissions. This paper reveals a method for dimensioning a suitable system of heat pump and photovoltaics (PV) for residential buildings in order to achieve a high level of (photovoltaic) PV self-consumption. This is accomplished by utilizing a thermal energy storage (TES) for shifting the operation of the heat pump to times of high PV power production by an intelligent control algorithm, which yields a high portion of PV power directly utilized by the heat pump. In order to cover the existing set of building infrastructure, 4 reference buildings with different years of construction are introduced for both single- and multi-family residential buildings. By this means, older buildings with radiator heating as well as new buildings w... [more]

In most demand response (DR) based residential load management systems, shifting a considerable amount of load in low price intervals reduces end user cost, however, it may create rebound peaks and user dissatisfaction. To overcome these problems, this work presents a novel approach to optimizing load demand and storage management in response to dynamic pricing using machine learning and optimization algorithms. Unlike traditional load scheduling mechanisms, the proposed algorithm is based on finding suggested low tariff area using artificial neural network (ANN). Where the historical load demand individualized power consumption profiles of all users and real time pricing (RTP) signal are used as input parameters for a forecasting module for training and validating the network. In a response, the ANN module provides a suggested low tariff area to all users such that the electricity tariff below the low tariff area is market based. While the users are charged high prices on the basis of... [more]

The unbalanced distribution of resource and consuming centers in China has prompted the AC/DC hybrid transmission technology. The maintenance scheduling of an AC/DC hybrid transmission network is the key technology to ensure its safety and reliability. In this study, the mutual influence mechanism of an AC/DC system in a maintenance period was analyzed in detail. The overhead transmission line and transformer are key equipment within an AC/DC hybrid transmission network, and an optimization model of the key equipment maintenance scheduling was established. The objective of the model was to improve the system reliability during the maintenance scheduling. By considering the constraints of maintenance cost, maintenance resources, and maintenance workload, the maintenance scheduling of overhead transmission lines and transformer branches was obtained. The over-limit situation of power flow and the weakness of the system during the maintenance period was evaluated. The “double-layer substi... [more]

The growing share of renewable energy makes the optimization of power flows in power system models computationally more complicated, due to the widely distributed weather-dependent electricity generation. This article evaluates two methods to reduce the temporal complexity of a power transmission grid model with storage expansion planning. The goal of the reduction techniques is to accelerate the computation of the linear optimal power flow of the grid model. This is achieved by choosing a small number of representative time periods to represent one whole year. To select representative time periods, a hierarchical clustering is used to aggregate either adjacent hours chronologically or independently distributed coupling days into clusters of time series. The aggregation efficiency is evaluated by means of the error of the objective value and the computational time reduction. Further, both the influence of the network size and the efficiency of parallel computation in the optimization p... [more]

Planning the operation scheduling with optimization heuristic algorithms allows microgrids to have a convenient tool. The developments done in this study attain this scheduling taking into account the impact of energy storage useful life in the microgrid operation. The scheduling solutions, proposed for the answer of an optimization problem, are obtained by using a metaheuristic algorithm called Differential Evolutionary Particle Swarm Optimization (DEEPSO). Thanks to the optimization that is conducted in this study, it is possible to formulate dispatches of the existent microgrid (MG) by always looking for the ideal dispatch that implies a lower cost and provides a greater viability to any project related to renewable energy, electric vehicles and energy storage. These advances oblige the battery manufacturers to start looking for more powerful batteries, with lower costs and longer useful life. In this way, this paper proposes a scheduling tool considering the energy storage useful l... [more]

Electrochemical energy storage (EES) is a promising kind of energy storage and has developed rapidly in recent years in many countries. EES planning is an important topic that can impact the earnings of EES investors and sustainable industrial development. Current studies only consider the profit or cost of the EES planning program, without considering other economic criteria such as payback period and return on investment (ROI), which are also important for determining an optimal EES planning program. In this paper, a new hybrid multi-criteria decision-making (MCDM) method integrating the Bayesian best-worst method (BBWM), the entropy weighting approach, and grey cumulative prospect theory is proposed for the optimal EES planning program selection with the consideration of multiple economic criteria. The BBWM and entropy weighting approach are jointly employed for determining the weightings of criteria, and the grey cumulative prospect theory was utilized for the performance rankings... [more]

Combined cooling, heating, and power (CCHP) systems are a promising energy-efficient and environment-friendly technology. However, their performance in terms of energy, economy, and environment factors depends on the operation strategy. This paper proposes a multi-energy complementary CCHP system integrating renewable energy sources and schedulable heating, cooling, and electrical loads. The system uses schedulable loads instead of energy storage, at the same time, a collaborative optimization scheduling strategy, which integrates energy supply and load demand into a unified optimization framework to achieve the optimal system performance, is presented. Schedulable cooling and heating load models are formulated using the relationship between indoor and outdoor house temperatures. A genetic algorithm is employed to optimize the overall performance of energy, economy, and environment factors and obtain optimal day-ahead scheduling scheme. Case studies are conducted to verify the efficien... [more]

Italy, Greece, and, to a lesser degree, Bulgaria have experienced fast growth in their renewable generation capacity (RESc) over the last several years. The consequences of this fact include a decrease in spot wholesale prices in electricity markets and a significant effect on cross border trading (CBT) among neighboring interconnected countries. In this work, we empirically analyzed historical data on fundamental market variables (i.e., spot prices, load, RES generation) as well as CBT data (imports, exports, commercial schedules, net transfer capacities, etc.) on the Greek, Italian, and Bulgarian electricity markets by applying the Granger causality connectivity analysis (GCCA) approach. The aim of this analysis was to detect all possible interactions among the abovementioned variables, focusing in particular on the effects of growing shares of RES generation on the commercial electricity trading among the abovementioned countries for the period 2015−2018. The key findings of this pa... [more]

The energy transition from fossil-based energy sources to renewable energy sources of an industrialized country is a big challenge and needs major systemic changes to the energy supply. Such changes require a holistic view of the energy system, which includes both renewable potentials and consumption. Thereby exergy, which describes the quality of energy, must also be considered. In this work, the determination and analysis of such a holistic view of a country are presented, using Austria as an example. The methodology enables the calculation of the spatially resolved current exergy consumption, the spatially resolved current useful exergy demand and the spatially resolved technical potential of renewable energy sources (RES). Top-down and bottom-up approaches are combined in order to increase accuracy. We found that, currently, Austria cannot self-supply with exergy using only RES. Therefore, Austria should increase the efficiency of its energy system, since the overall exergy efficie... [more]

An important issue in directional sensor networks (DSNs) is how to prolong the network lifetime in Q-coverage scenarios where each target point may have different coverage requirements. When the Q-coverage requirement is met, it is an effective way to maximize the network lifetime by controlling energy consumptions. Unlike the existing results where only the sensing energy consumption is considered, this paper proposes a new hybrid energy consumption pattern, which reflects the reality of energy consumptions more closely. In such a pattern, both sensing and communication energy consumptions are considered. By combining scheduling and clustering technologies to control these two kinds of energy consumptions in each round, a new lifetime-enhancing method (NLEM) is devised to prolong the network lifetime. First, a sensing direction scheduling algorithm for Q-coverage is proposed to make different sensing direction sets meet the coverage requirement of each target point. Then, a new cluste... [more]

There is great interest in data-driven modelling for the forecasting of building energy consumption while using machine learning (ML) modelling. However, little research considers classification-based ML models. This paper compares the regression and classification ML models for daily electricity and thermal load modelling in a large, mixed-use, university building. The independent feature variables of the model include outdoor temperature, historical energy consumption data sets, and several types of ‘agent schedules’ that provide proxy information that is based on broad classes of activity undertaken by the building’s inhabitants. The case study compares four different ML models testing three different feature sets with a genetic algorithm (GA) used to optimize the feature sets for those ML models without an embedded feature selection process. The results show that the regression models perform significantly better than classification models for the prediction of electricity demand a... [more]