Lactic acid (LA) has broad applications in the food, chemical, pharmaceutical, and cosmetics industries. LA production demand rises due to the increasing demand for polylactic acid since LA is a precursor for polylactic acid production. Fermentative LA production using renewable resources, such as lignocellulosic materials, reduces greenhouse gas emissions and offers a cheaper alternative feedstock than refined sugars. Suitable pretreatment methods must be selected to minimize LA cost production, as the successful hydrolysis of lignocellulose results in sugar-rich feedstocks for fermentation. This review broadly focused on fermentative LA production from lignocellulose. Aspects discussed include (i). low-cost materials for fermentative LA production, (ii). pretreatment methods, (iii). enzymatic hydrolysis of cellulose and hemicellulose, (iv). lactic acid-producing microorganisms, including fungi, bacteria, genetically modified microorganisms, and their fermentative pathways, and (v). f... [more]

The influence of biostimulants (B) and nitrogen (N) fertilization on the yield and quality of onions were investigated. Experiments in the field with directly seeded (DS) onions and those from sets (FS) were carried out in 2021 in the Autonomous Province of Vojvodina (Serbia). HumiBlack® (B1), Tifi® (B2), and Agasi® (B3) were used as B, and there was a control without B. Four N doses were used: 64, 100, 150 (standard dose), and 200 kg N/ha. The highest yields of DS onions (63.9 t/ha) and FS onions (52, 1 t/ha) were measured on treatment B2 × 150 kg N/ha. The highest total sugar content (80.6 g/100 g DM) was measured in FS onions under treatment B2 × 100 kg N/ha. Total nitrogen and protein content were the highest in DS onions treated with B2 × 200 kg N/ha, where total nitrogen was 2.3 g/100 g DM and protein content was 14.5 g/100 g DM. Depending on B and N, titratable acidity ranged from 1.7 to 3.6 g/100 g DM. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) w... [more]

Wireless capsule endoscope (WCE) is a promising technology for noninvasive and painless imaging detection on gastrointestinal (GI) diseases. On the other hand, conventional endoscopes with wires could discomfort patients and cause them to vomit and aerosolize coronavirus if the patients are infected with COVID-19. However, there stands a technical bottleneck on power supply for the WCE. With the help of wireless power transmission technology, a hollow receiving coil (RC) is proposed to supply sufficient power and also minimize the size of WCE. A model on mutual inductance between transmitting and receiving coils is proposed to evaluate receiving power when the RC is in a different position and direction of patient’s GI tract. Based on the model, an optimal RC is built to obtain sufficient and stable power. Measurement of mutual inductance with the optimal RC validates high accuracy of the proposed model. The standard deviation of receiving power is very low. WCE with optimum RC gets su... [more]

When driven by sunlight, molten catalytic methane cracking can produce clean hydrogen fuel from natural gas without greenhouse emissions. To design solar methane crackers, a canonical plug flow reactor model was developed that spanned industrially relevant temperatures and pressures (1150−1350 Kelvin and 2−200 atmospheres). This model was then validated against published methane cracking data and used to screen power tower and beam-down reactor designs based on “Solar Two,” a renewables technology demonstrator from the 1990s. Overall, catalytic molten methane cracking is likely feasible in commercial beam-down solar reactors, but not power towers. The best beam-down reactor design was 9% efficient in the capture of sunlight as fungible hydrogen fuel, which approaches photovoltaic efficiencies. Conversely, the best discovered tower methane cracker was only 1.7% efficient. Thus, a beam-down reactor is likely tractable for solar methane cracking, whereas power tower configurations appear... [more]

In this study, several purge and ventilation methods are proposed to reduce and remove condensation in a heat recovery ventilator for commercial and household buildings. The effects of the airflow rate, duration of ventilation, purge interval, and return air temperature on the quantities of condensation and condensation removal in the heat recovery ventilator are analyzed. The increase in the air flow rate and return air temperature increases the condensation removal rate owing to the enhanced evaporation of the condensate. Furthermore, the reductions in the duration of ventilation and purge interval decreased the accumulation of condensate on the heat exchanger element. Based on the experimental results, optimum ventilation and purge strategies are proposed according to the outdoor temperature. The operation of the heat recovery ventilator with the proposed ventilation and purge strategies shows at least a 33% and up to an 80% reduction in the quantity of condensate compared with a gi... [more]

Solar radiation exposure at work is a relevant heath risk in the construction sector. Our objective was to monitor for a full month the individual solar ultraviolet radiation (UVR) exposure of a group of three construction workers active in Siena (latitude = 43°19′ N), a town in Tuscany (Italy). We used personal electronic dosimeters “X-2012-10” (Gigahertz, Turkenfeld, Germany) to register the UV irradiance in the UVA and UVB/C regions separately and we consulted a specific database to retrieve the corresponding ambient erythemal UVR dose (cloud-free conditions). In spring, construction workers from central Italy received a quite variable UVR dose, between 0.9 standard erythemal doses (SED) and 15.6 SED/day, 5.7 on average. Considering the proportion with respect to the potential environmental exposure, personal exposure resulted between 2.7% and 31.2% of the ambient erythemal dose, with a mean value of 12.5%. Cumulatively, the three construction workers received in one working month a... [more]

Microalgae are a practical source of biological compounds for biodiesel production. This study examined the influence of three different light-emitting diode (LED) systems on the biomass production of green algae Chlorella vulgaris BA0002a. The cultivation was carried out in a photobioreactor illuminated from the bottom with a single side light jacket (PBR I), in a photobioreactor illuminated from the bottom with a double side light jacket (PBR II) and in a photobioreactor illuminated only from the top (PBR III). Research has shown that the intensification of algae cell production and growth depends on the light distribution and exposure time of a single cell to radiation. In the experiment, the highest growth of algae cells was obtained in the photobioreactor with double jacket and lower light panel. The lowest cell growth was observed in the photobioreactor illuminated only from above. For cultures raised in the PBR I and PBR II photobioreactors, increased oxygen production was obser... [more]

The study aims to explore microbial lipid production using an abundant and low-cost lignocellulosic biomass derived from forestry residues. Sugar-rich undetoxified hydrolysate was prepared using hardwood and softwood sawdust and used for lipid production as a carbon source from an oleaginous yeast, Rhodosporidium toruloides-1588. The maximum biomass obtained was 17.09 and 19.56 g/L in hardwood and softwood hydrolysate, respectively. Sugar consumption in both hydrolysates was >95%, with a maximum lipid accumulation of 36.68% at 104 h and 35.24% at 96 h. Moreover, R. toruloides-1588 exhibited tolerance to several toxic compounds such as phenols, organic acids and furans present in hydrolysates. The lipid characterization showed several monosaturated and polyunsaturated fatty acids, making it a potential feedstock for biofuels and oleochemicals production. This study confirms the credibility of R. toruloides-1588 as a suitable lipid producer using hydrolysates from forestry residues as a... [more]

This study compares the effects of pure kraft lignin and the kraft lignin/silica system (1:4 by weight). The comparative analysis of the physicochemical properties of both carriers showed that the kraft lignin/silica system was characterised by better properties. The experiment conducted in the study involved continuous anaerobic digestion under mesophilic conditions. Three samples were degraded in the following order: (i) sewage sludge (SS), (ii) SS with the addition of kraft lignin, and (iii) SS with the addition of the kraft lignin/silica system. A quantitative analysis of the digestate samples was carried out by means of in situ fluorescence. It showed more intense proliferation of microorganisms in the SS + kraft lignin/silica variant than in the sample with pure kraft lignin. The highest amount of biogas was obtained in the SS + kraft lignin/silica variant (689 m3 Mg−1 VS, including 413 m3 Mg−1 VS of methane; VS—volatile solids). There were comparable amounts of biogas in the SS... [more]

There is a growing need of substrate flexibility for biobased production of energy and value-added products that allows the application of variable biodegradable residues within a circular economy. It can be used to balance fluctuating energy provision of other renewable sources. Hydrolysis presents one of the biggest limitations during anaerobic digestion. Methods to improve it will result in broader process applicability and improved integration into regional material cycles. Recently, one focus of anaerobic digestion research has been directed to systems with a separate hydrolysis−acidogenesis stage as it might be promised to improve process performance. Conditions can be adjusted to each class of microorganisms individually without harming methanogenic microorganisms. Extensive research of separate biomass pretreatment via biological, chemical, physical or mixed methods has been conducted. Nevertheless, several methods lack economic efficiency, have a high environmental impact or f... [more]

A Microbial Fuel Cell (MFC) is a process in which a microorganism respires and captures the electrons that normally passes through the electron transport system of the organism and produces electricity. This work intends to present the different operating parameters affecting the efficiency of a Microbial Fuel Cell (MFC) process. To study the performance of the process, various materials for the cathode and anode rods with similar size and chape including, copper, aluminum, carbon cloth, steel and brass were considered to determine the combination that leads to the best results. Moreover, different oxidizing agents such as Copper Sulphate and Potassium Hexacyanoferrate were considered. Furthermore, the effects of shapes, sizes and distance between electrodes on the current and voltage were investigated. The power outputs between electrochemical and microbial cells were recorded. In addition, the power, whether expressed as voltage or current, was measured at different conditions and di... [more]

This work dealt with the study of growth parameters, pigments production, and bioenergetic aspects of the microalga Dunaliella tertiolecta in different culture media. For this purpose, cultures were carried out in Erlenmeyer flasks containing F/2 medium, Bold’s Basal medium, or an alternative medium made up of the same constituents of the Bold’s Basal medium dissolved in natural seawater instead of distilled water. D. tertiolecta reached the highest dry cell concentration (Xmax = 1223 mgDM·L−1), specific growth rate (µmax = 0.535 d−1), cell productivity (PX = 102 mgDM·L−1·d−1), and photosynthetic efficiency (PE = 14.54%) in the alternative medium, while the highest contents of carotenoids (52.0 mg·g−1) and chlorophyll (108.0 mg·g−1) in the biomass were obtained in Bold’s Basal medium. As for the bioenergetic parameters, the biomass yield on Gibbs energy dissipation was higher and comparable in both seawater-based media. However, the F/2 medium led to the highest values of moles of phot... [more]

Prolific energy writer Vaclav Smil’s “Growth: From Microorganisms to Megacities” (MIT Press, Cambridge, MA, USA, 2019) is marketed as the most comprehensive study of the modalities of growth in Earth’s life systems in their many natural, social, and technological forms. While the book reflects Smil’s strength as a polymath, it also brings into focus his Malthusian outlook. Smil’s Malthusianism is puzzling in light of much empirical evidence to the contrary and of his own detailed histories of human technological achievements, including his recent massive synthesis “Energy and Civilization: A History” (MIT Press, Cambridge, MA, USA, 2017). In keeping with Smil’s historical emphasis, in this review essay, the Malthusian assumptions, assertions, and conclusions of these books are challenged through the Promethean insights of numerous writers whose output long predates the modern environmental movement and can thus avoid charges of “greenwashing”. I make a case that, in the context of mark... [more]

This paper presents the results of an interdisciplinary study aimed at assessing the possibility of using duckweed to purify and recover nutrients from the effluent remaining after struvite precipitation and ammonia stripping from a liquid fraction of anaerobic digestate in a biorefinery located at a Dutch dairy cattle production farm. The nutritional value of duckweed obtained in a biorefinery was assessed as well. Duckweed (Lemna minuta) was cultured on a growth medium with various concentrations of effluent from a biorefinery (EFL) and digested slurry (DS) not subjected to the nutrient recovery process. The study’s results showed that duckweed culture on the media with high contents of DS or EFL was impossible because they both inhibited its growth. After 15 days of culture, the highest duckweed yield was obtained from the ponds with DS or EFL contents in the medium reaching 0.39% (37.8 g fresh matter (FM) and 16.8 g FM per 8500 mL of the growth medium, respectively). The recovery o... [more]

Microalgae and cyanobacteria are unicellular microorganism that contain high-added-value compounds. To make their extraction economically feasible, the biorefinery concept is the only solution. In this study, the residues resulting from lipid or protein extraction from Arthrospira platensis biomass were valorized by catalytic pyrolysis using ZSM5 zeolite or amorphous silica−alumina as catalyst. The reaction was performed in a quartz reactor, and the catalysts were placed in a fixed bed, to force the reaction gases to pass through it. The reaction products were analyzed by FTIR and GC−MS analyses. The reaction gases and liquids obtained from the extraction residues had higher hydrocarbon contents compared with the untreated biomass. Moreover, the pyrolysis of biomass after protein extraction led to fractions with lower nitrogenated component contents, while that after lipid extraction to fractions with lower oxygenated component contents. This study showed that the pyrolysis process cou... [more]

This study examined the feasibility of using non-sterilized swine wastewater for lipid production by an isolated microalga, Scenedesmus rubescens. Different dilution ratios using municipal wastewater as a diluent were tested to determine the suitable levels of microalgal growth in the wastewaters, its nutrient removal, and its lipid production. The highest lipid productivity (8.37 mg/L/d) and NH4+ removal (76.49%) were achieved in swine wastewater that had been diluted to 30 times using municipal wastewater. Various bacteria coexisted in the wastewaters during the cultivation of S. rubescens. These results suggest the practical feasibility of a system to produce lipids from swine wastewater by using microalgae.

Molasses is a highly dense and refined byproduct produced in the sugarcane industry, and it contains high amounts of degradable compounds. Through bioconversion, these compounds can be transformed into renewable products. However, the involved biological process is negatively influenced by the high chemical oxygen demand (COD) of molasses and ion concentration. The co-digestion of molasses with rice-alcohol wastewater (RAW) was compared with its mono-digestion at an increasing organic loading rate (OLR). Both processes were assessed by detecting the COD removal rate, the methane contents of biogas, and the structure and composition of microbial communities at different stages. Results showed that the co-digestion is stable up to a maximum OLR of 16 g COD L−1 d−1, whereas after the acclimatization phase, the mono-digestion process was disturbed two times, which occurred at a maximum OLR of 9 and 10 g COD L−1 d−1. The volatile fatty acids (VFAs) observed were 2059.66 mg/L and 1896.9 mg/L... [more]

The energy contained in wastewaters has been identified as a promising sustainable energy resource that could be harvested by using microbial fuel cells (MFC). When dealing with real wastewaters, the MFCs should be able to manage high flow rates and flow rates fluctuations. In this work, the short-term effects of the influent flow rate variations on the performance of a microbial fuel cell has been studied. With this aim, the influent flow rate was stepwise increased from 0.72 to 7.2 L/d and then stepwise decreased. The obtained results indicate that, on the one hand, an increase in the influent flow rate leads to higher chemical oxygen demand removal rates up to 396 g/(L/d) and higher electric power generation almost 18 mW/m2, but to lower coulombic efficiencies. On the other hand, the reduction of the flow rate increases the coulombic efficiencies, as well as the percentage of chemical oxygen demand removed, but decreases electric power generation. In the short-term, the exposition t... [more]

Development of economical and environment-friendly Microbial Fuel Cells (MFCs) technology should be associated with waste management. However, current knowledge regarding microbiological bases of electricity production from complex waste substrates is insufficient. In the following study, microbial composition and electricity generation were investigated in MFCs powered with waste volatile fatty acids (VFAs) from anaerobic digestion of primary sludge. Two anode sizes were tested, resulting in organic loading rates (OLRs) of 69.12 and 36.21 mg chemical oxygen demand (COD)/(g MLSS∙d) in MFC1 and MFC2, respectively. Time of MFC operation affected the microbial structure and the use of waste VFAs promoted microbial diversity. High abundance of Deftia sp. and Methanobacterium sp. characterized start-up period in MFCs. During stable operation, higher OLR in MFC1 favored growth of exoelectrogens from Rhodopseudomonas sp. (13.2%) resulting in a higher and more stable electricity production in... [more]

Maximizing the internal carbon sources in raw wastewater was found to be an alternative option to alleviate the financial burden in external carbon sources (ECS) addition to the biological nutrient removal (BNR) process. Based on previous studies on particulate recovery via fine-sieving technologies, alkali pretreatment was used to improve the short-chain fatty acid (SCFA) production from the fine-sieving fractions (FSF). Hydrolysis performance and methane production were monitored to evaluate the reasons for the SCFA boost. Besides, the microbial community structure was evaluated by high-throughput sequencing. Furthermore, mass balance and financial benefits were preliminarily estimated. The results showed that alkali pretreatment effectively promoted the generation of SCFAs with 234 mg/g volatile suspended solids (VSS), almost double that of the control test. This was partially attributed to the efficient hydrolysis, with soluble polysaccharides and protein increased by 2.1 and 1.2 t... [more]

This article presents the results of a three-year experiment involving a multi-criteria evaluation (productivity, economic and energy balance) of the effectiveness of nitrogen (N) and sulfur (S) fertilization in different cultivars of winter oilseed rape (open-pollinated, semi-dwarf hybrid, long-stem hybrid) grown in north-eastern (NE) Poland. The yield of the semi-dwarf cultivar was 11% lower than the yield of the long-stem hybrid cultivar and 18% higher than the yield of the open-pollinated cultivar. In all cultivars, N fertilization improved yields up to a rate of 180 kg ha−1 and up to a rate of 230 kg ha−1 in years with low precipitation in spring and summer. Seed yield increased in all cultivars in response to S fertilization at 40 kg ha−1. Higher rates of N fertilizer decreased the content of crude fat and glucosinolates (GLS) and increased the concentration of total protein in all cultivars. Sulfur fertilization increased the content of total protein (in long-stem cultivars) and... [more]

The oleaginous yeast Rhodosporidium toruloides has emerged as a robust host for production of microbial lipids as alternative biofuel feedstocks. Oxygen supply is a limiting factor for microbial lipid production, as lipid biosynthesis is highly oxygen-demanding. Vitreoscilla hemoglobin (VHb) is a protein capable of promoting oxygen delivery for anabolism. In this study, we developed R. toruloides with VHb expression for improved lipid production. The VHb expression cassette was integrated into the R. toruloides chromosome via the Agrobacterium-mediated transformation. In shake flask cultures, the engineered strain 4#-13 produced 34% more lipids than the parental strain did. Results obtained under reduced aeration conditions in 3 L bioreactor showed that lipid titer and lipid yield of the engineered strain 4#-13 were 116% and 71%, respectively, higher than those of the parental strain. Under high cell density culture conditions, the engineered strain 4#-13 grew faster and produced 72% m... [more]

A novel process is proposed whereby wood wastes from forest tree mortalities and improved forest management are co-digested with high in nitrogen content animal manures to yield bio-methane along with nitrogen, phosphorous, and potassium bio-fertilizers. The process mimics the well-known wood conversion to methane process in lower termites but relies on thermophilic fungi, bacteria, and archaea instead. It is based on the modified state-of-the art two-step, hyperthermophilic (70 °C) hydrolysis and thermophilic (55 °C) fermentation, dry (30% TS), anaerobic digestion technology with a high organic loading and shortened retention time. The process is augmented with the thermophilic fermentation of carbon dioxide in the biogas into secondary bio-methane by employing hydrogen produced via wind-powered electrolysis. The entire process comprised of five distinct steps is designated as “Wood to Methane 3 + 2”. An industrial type, standardized plant unit has been developed that can be employed... [more]

Crude oil is a major energy source that is exploited globally to achieve economic growth. To meet the growing demands for oil, in an environment of stringent environmental regulations and economic and technical pressure, industries have been required to develop novel oil salvaging techniques. The remaining ~70% of the world’s conventional oil (one-third of the available total petroleum) is trapped in depleted and marginal reservoirs, and could thus be potentially recovered and used. The only means of extracting this oil is via microbial enhanced oil recovery (MEOR). This tertiary oil recovery method employs indigenous microorganisms and their metabolic products to enhance oil mobilization. Although a significant amount of research has been undertaken on MEOR, the absence of convincing evidence has contributed to the petroleum industry’s low interest, as evidenced by the issuance of 400+ patents on MEOR that have not been accepted by this sector. The majority of the world’s MEOR field t... [more]

In the present work, sedimentary microbial fuel cells (s-MFC) have been proposed as effective tools to power remote sensors in different aquatic environments, thanks to their ability to produce renewable and sustainable energy continuously and autonomously. The present work proposes the optimization of cylindrical sedimentary microbial fuel cells (s-MFC) as a compact and cost-effective system suitable to be integrated as a payload in an Autonomous Underwater Vehicle (AUV). To this purpose, a new AUV payload, named MFC-payload, is designed to host the cylindrical s-MFC and a data acquisition system to collect and store information on the voltage produced by the cell. Its overall performance was evaluated during two field measurement campaigns carried out in the Mediterranean Sea. This investigation demonstrates the power production by s-MFC during operation of the AUV in seawater and analyzes the actual influence of environmental conditions on the output power. This study demonstrates t... [more]