Sludge pre-treatments are emerging as part of the disposal process of solid by-products of wastewater purification. One of their benefits is the increase in methane production rate and/or yield, along with higher loading capacities of existing digesters. In this study, we report the performance of a pilot-scale compartmentalized digester (volume of 18.6 m3) that utilized a mild thermal pre-treatment at 70 °C coupled with hydrogen peroxide dosing. Compared with a reference conventional anaerobic digester, this technique allowed an increased organic loading rate from 1.4 to 4.2 kg volatile solids (VS)/(m3d) and an increment in the solids degradation from 40 to 44%. To some extent, these improvements were promoted by the solubilization of the tightly-bound fraction of the extracellular polymeric substances to looser and more accessible fractions without the formation of refractory compounds. In sum, our results suggest that this pre-treatment method could increase the treatment capacity o... [more]

Achieving a satisfactory level for indoor environments of historical buildings is an ongoing problem that needs to be solved due to a large demand for deep retrofits in the whole of Europe. The implementation of the indoor environmental quality index (IEQ) to predict an occupant’s satisfaction in thermo-modernized historical buildings is a new concept which is a response to existing needs. In this article, a relevant study is provided with the intention to evaluate the indoor environmental performance of retrofitting effects in historical buildings dating back to the years 1873−1878. Considering the historical character of the buildings, some of the cellar spaces were fitted out with an innovative internal insulation system of mineral sheets based on calcium silicate to prevent water vapor condensation and effectively limit mold growth. The IEQ methodology was applied for retrofitted and non-retrofitted spaces as a comparison. Four essential components of indoor quality are investigate... [more]

As the world grapples with the COVID-19 pandemic, there has been a sudden and abrupt change in global energy landscape. Traditional fossil fuels that serve as the linchpin of modern civilization have found their consumption has rapidly fallen across most categories due to strict lockdown and stringent measures that have been adopted to suppress the disease. These changes consequently steered various environmental benefits across the world in recent time. The present article is an attempt to investigate these environmental benefits and reversals that have been materialized in this unfolding situation due to reduced consumption of fossil fuels. The life cycle assessment tool was used hereby to evaluate nine environmental impacts and one energy based impact. These impacts include ozone formation (terrestrial ecosystems), terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial ecotoxicity, freshwater ecotoxicity, marine ecotoxicity, land use, mineral resour... [more]

Inclusion of energy efficiency measures (EEMs) in the renovation of the single-family housing stock can unlock the potential for much-needed energy efficiency to tackle climate change. Energy renovation (ER) in single-family houses is often promoted as an aggregate process, and EEMs are treated homogenously without sufficient attention to their differences. This study applies a comparative analysis on common EEMs using chi-square test to investigate the influence of factors already found affecting the implementation of ER. This paper addresses the “personal” and “house-related” factors influencing the adoption of EEMs regardless of motives or barriers leading the adopters’ decisions. This strategy is useful to highlight the contexts leading to an increase in the adoption rate of different EEMs. The analysis is based on a questionnaire survey mailed in spring 2017 to 1550 single-family homeowners in the northern region of Sweden. Approximately 60% of respondents showed interest in adopt... [more]

Getting a clear understanding of the fluid velocity field in underground porous media is critical to various engineering applications, such as oil/gas reservoirs, CO2 sequestration, groundwater, etc. As an effective visualization tool and efficient transport behaviors solution algorithm, the streamline-based method was improved significantly by numerous studies conducted in the last couple of decades. However, the implementation of streamline simulation is still challenging while working with Finite Element Method (FEM) over 3D tetrahedral domains, where the mass conservation is not guaranteed. Considering the increased computational cost to enforce mass conservation in FEM and additional complexity, a new three-dimensional streamline tracing algorithm is presented that only relies on the velocity vector of a flow field on each vertex of a tetrahedron in a 3D unstructured mesh system. Owning to the shape functions and transformation equations between the master element and actual eleme... [more]

Efforts to achieve Sustainable Development Goals (SDGs) have resulted in enhancement of the position of microalgae in feedstocks for food, feed, healthcare, and biofuels. However, stabile microalgal biorefineries require a sustainable and reliable management system of microalgae, which are sensitive to environmental changes. To expand microalgal applicability, assessment and maintenance of microalgal quality are crucial. Compared with conventional methods, including hemocytometry and turbidity, an automated- and image-based cell counter contributes to the establishment of routine management of microalgae with reduced work burden. This review presents the principle of an automated cell counter and highlights the functional capacities of the device for microalgal management. The method utilizing fluorescence function to evaluate the chlorophyll integrity of microalgae may lay the groundwork for making a large variety of microalgal biorefineries, creating an important step toward achievin... [more]

There is a burden of adequate energy supply for meeting demand and reducing emission to avoid the average global temperature of above 2 °C of the pre-industrial era. Therefore, this study presents the exergoeconomic and environmental analysis of a proposed integrated multi-generation plant (IMP), with supplemental biomass-based syngas firing. An in-service gas turbine plant, fired by natural gas, was retrofitted with a gas turbine (GT), steam turbine (ST), organic Rankine cycle (ORC) for cooling and power production, a modified Kalina cycle (KC) for power production and cooling, and a vapour absorption system (VAB) for cooling. The overall network, energy efficiency, and exergy efficiency of the IMP were estimated at 183 MW, 61.50% and 44.22%, respectively. The specific emissions were estimated at 122.2, 0.222, and 3.0 × 10−7 kg/MWh for CO2, NOx, and CO, respectively. Similarly, the harmful fuel emission factor, and newly introduced sustainability indicators—exergo-thermal index (ETI)... [more]

This paper presents an application of a framework for Big Data Analytical Process and Mapping—BAProM—consisting of four modules: Process Mapping, Data Management, Data Analysis, and Predictive Modeling. The framework was conceived as a decision support tool for industrial business, encompassing the whole big data analytical process. The first module incorporates in big data analytical a mapping of processes and variables, which is not common in such processes. This is a proposal that proved to be adequate in the practical application that was developed. Next, an analytical “workbench” was implemented for data management and exploratory analysis (Modules 2 and 3) and, finally, in Module 4, the implementation of artificial intelligence algorithm support predictive processes. The modules are adaptable to different types of industry and problems and can be applied independently. The paper presents a real-world application seeking as final objective the implementation of a predictive mainte... [more]

The Kaya identity is a powerful index displaying the influence of individual carbon dioxide (CO2) sources on CO2 emissions. The sources are disaggregated into representative factors such as population, gross domestic product (GDP) per capita, energy intensity of the GDP, and carbon footprint of energy. However, the Kaya identity has limitations as it is merely an accounting equation and does not allow for an examination of the hidden causalities among the factors. Analyzing the causal relationships between the individual Kaya identity factors and their respective subcomponents is necessary to identify the real and relevant drivers of CO2 emissions. In this study we evaluated these causal relationships by conducting a parallel multiple mediation analysis, whereby we used the fossil fuel CO2 flux based on the Open-Source Data Inventory of Anthropogenic CO2 emissions (ODIAC). We found out that the indirect effects from the decomposed variables on the CO2 flux are significant. However, the... [more]

This study measures the unified (i.e., operational and environmental) performance of semiconductor firms in the world by using Data Envelopment Analysis (DEA) environmental assessment. With its promising and expanding electronic applications, many industrial nations have supported the semiconductor industry under their strategic plans, and numerous firms are involved in the global value chain. Drawing on the proposed DEA-based environmental (sustainability) assessment, which uses two disposability criteria (i.e., natural and managerial), this study first compute the unified efficiency scores of semiconductor firms. Then, this study explores how corporate age, business model, and location influence the efficiency scores by employing Tobit regressions and t-tests. The empirical implications obtained from this research indicate that overall, the semiconductor firms look for their economic achievements but are not paying enough attention to environmental sustainability. Corporate age and b... [more]

The achievement of climate neutrality and eco-economic decoupling requires explicit measures to reduce greenhouse gases (GHG) emissions and to implement circular economy (CE) principles in practice. The energy sector is of particular importance in meeting these challenges because it exerts a substantial environmental impact. Therefore, it is extremely important to determine how essential GHG and CE issues are for companies operating in the energy sector. This can be reflected in corporate strategies, but it can also be disclosed to the public in sustainability reports. For this reason, this article presents a comprehensive analysis of sustainability reports based on the latest GRI Standards published by companies representing the energy sector in the European Union to determine the existence, quality, and specificity of reporting GHG and CE issues. The research results demonstrate that sustainability reports from the energy sector companies tend to focus more on GHG issues. They rarely... [more]

The sinter process of iron ore with biomass carbon instead of coke breeze as fuel was investigated via thermodynamic analysis in this paper through a comparison of sinter composition indexes, metallurgical properties, and pollutant emissions. Straw charcoal was used in this paper, and its replacement does not adversely affect the composition index of iron ore, namely Fe, FeO, basicity, S, nor the metallurgical properties, namely reduction degradation index and reduction index. However, the replacement has a great effect on the emissions of pollutant gases, including SO2, NOx, CO, and CO2. The thermodynamic analysis result shows that emissions of pollutant gases produced in the sinter process significantly decrease by using straw charcoal instead of coke breeze in sinter. The sintering maximum temperature has a great influence on sintering technical indicators. The best sintering maximum temperature is between 1300 and 1400 °C, where sinter ore with high quality can be obtained.

A balanced combination of heat flows creates suitable conditions for thermal comfort—a factor contributing to the quality of the internal environment of buildings. The presented analysis of selected thermal-technical parameters is up-to-date and suitable for verifying the parameters of building constructions. The research also applied a methodology for examining the acoustic parameters of structural parts of buildings in laboratory conditions. In this research, selected variant solutions of perimeter walls based on prefab cross laminated timber were investigated in terms of acoustic and thermal-technical properties. The variants structures were investigated in laboratory but also in model conditions. The results of the analyses show significant differences between the theoretical or declared parameters and the values measured in laboratory conditions. The deviations of experimental measurements from the calculated or declared parameters were not as significant for variant B as they wer... [more]

Microalgae are a renewable source of unconventional biomass with potential application in the production of various biofuels. The production of carbon-neutral fuels is necessary for protecting the environment. This work determined the possibility of producing biomass of microalgae belonging to Monoraphidium genus using saline wastewater resulting from proecological salmon farming in the recirculating aquaculture system. The tests were carried out in tubular photobioreactors using LED light. As a part of the analyses, the growth and productivity of microalgal biomass, cell density in culture, and lipid concentration and ash content in biomass were determined. In addition, the concentration of selected phosphorus and nitrogen forms present in wastewater corresponding to the degree of their use by microalgae as a nutrient substrate was determined. The biomass concentration estimated in the tests was 3.79 g·L−1, while the maximum biomass productivity was 0.46 g·L−1·d−1. The cells’ optical... [more]

In Northeast China, most classrooms in primary and secondary schools still use natural ventilation during cold days in winter. This study investigated the thermal comfort and the perceived air quality of children in primary schools in severe cold regions in China. Field measurements were conducted in four typical primary classrooms in two naturally ventilated teaching buildings in the winter of 2016 in the provincial city of Shenyang. Six field surveys were distributed to 141 primary students aged 8 to 11, and 835 valid questionnaires were collected. The results showed that the indoor temperature and the daily mean CO2 concentrations of the primary school classrooms ranged from 17.06 to 24.29 °C and from 1701 to 3959 ppm, respectively. The thermal neutral temperature of the primary school students was 18.5 °C, and the 90% thermal comfort temperature ranged from 17.3 to 20.1 °C. Children were able to respond to changes in indoor air quality, but there was no significant correlation betw... [more]

This paper describes Smiling Earth, a mobile app to increase citizens’ awareness about their own carbon footprint, by integrating energy and transport-related data. The main aim of our work is to explore the ways in which Information and Communication Technologies could help raise awareness and educate and motivate citizens about their actions and their consequences on the environment. Smiling Earth provides feedback to users by visualising data about their daily activities with the aim to motivate citizens to change their behaviour to reduce their CO2 emissions by adopting a healthier lifestyle. The value of the Smiling Earth for individuals, cities and communities is discussed. The feedback from an expert evaluation and how Smiling Earth could contribute to Positive Energy Districts are also discussed.

Seawater flue gas desulfurization (SWFGD) is considered to be a viable solution for coastal and naval applications; however, this process has several drawbacks, including its corrosive absorbent; low vapor loading capacity since the solubility of sulfur oxides (SOx) in seawater is lower than that of limestone used in conventional methods; high seawater flowrate; and large equipment size. This has prompted process industries to search for possible advanced and intensified configurations to enhance the performance of SWFGD processes to attain a higher vapor loading capacity, lower seawater flowrate, and smaller equipment size. This paper presents an overview of new developments as well as advanced and intensified configurations of SWFGD processes via process modifications such as modification and optimization of operating conditions, improvement of spray and vapor distributors, adding internal columns, using square or rectangular shape, using a pre-scrubber, multiple scrubber feed; proce... [more]

Industry 4.0 has radically been transforming the production processes and systems with the adoption of enabling technologies, such as Internet of things (IoT), big data, additive manufacturing (AM), and cloud computing. In this context, sensors are essential to extract information about production, spare parts, equipment health, and environmental conditions necessary for improving many aspects of industrial processes (flexibility, efficiency, costs, etc.). Sensors should be placed everywhere (on machines, smart devices, objects, and tools) inside the factory to monitor in real-time physical quantities such as temperature, vibrations, deformations that could affect the production. Printed electronics (PE) offers techniques to produce unconventional sensor and systems or to make conventional objects “smart”. This work aims to analyze innovative PE technologies—inkjet printing and aerosol jet printing in combination with photonic curing—as manufacturing technologies for electronics and se... [more]

The transition towards renewable energy sources and “green” technologies for energy generation and storage is expected to mitigate the climate emergency in the coming years [...]

Sustainability is among the most important directions in global development. The challenge today is to reconcile the fastest possible economic growth and the pursuit of prosperity with concern for the environment. One of the important problems of modern economies and societies is to reduce overall consumption and implement new patterns of sustainable consumption and production. The main aim of this article was to analyze consumer preferences in terms of purchasing personalized production offered by implementing the concept of Industry 4.0 and ensuring sustainable consumption and production (SCP). Based on the analysis of the literature and the results of our own research, an attempt was made to estimate the impact of personalized production offered by the Industry 4.0 concept on SCP and thus the sustainable development of the economy. This article presents the results of a survey conducted on a selected group of consumers, focusing on learning about expectations, consumer preferences f... [more]

L. (JCL) commercial plantations in Mexico, one of the most important JCL origin centers, have failed due to a variety of biological, political and technical factors affecting their productivity. This study explores feasible sites of JCL cultivation as a potential source for biodiesel production in Mexico, given agroclimatic and agroecological considerations. We propose a GIS-based approach for estimating suitable and available lands to grow JCL by integrating an Analytical Hierarchy Process (AHP) in the ArcGIS software. Spatial analysis combined multiple data, different evaluation criteria, three land availability classes (high, medium and low potential) and took into account ecological, ethical, and political restrictions, and considering two scenarios with different restriction levels. Suitability and availability maps were generated using agroclimatic information (climatic, land use/soil, and climate change and extreme weather events risk) together with other socioeconomic factors.... [more]

The monitoring of rock volume where offshore exploitation activities take place is crucial to assess the corresponding seismic hazard. Fluid injection/extraction operations generate a pore fluid pressure perturbation into the volume hosting the reservoir which, in turn, may trigger new failures and induce changes in the elastic properties of rocks. Our purpose is to evaluate the feasibility of reconstructing pore pressure perturbation diffusion in the host medium by imaging the 4D velocity changes using active seismic. We simulated repeated active offshore surveys and imaged the target volume. We constructed the velocity model perturbed by the fluid injection using physical modeling and evaluated under which conditions the repeated surveys could image the velocity changes. We found that the induced pressure perturbation causes seismic velocity variations ranging between 2−5% and 15−20%, depending on the different injection conditions and medium properties. So, in most cases, time-lapse... [more]

This paper deals with the study of multi-channel adaptive noise cancellation with a focus on its application in electromagnetic (EM) telemetry. We presented new variable step-size least mean square (LMS) techniques: regularized variable step-size LMS and regularized sigmoid variable size LMS, for electromagnetic telemetry data processing. Considering the complexity and spatial distribution of environmental noise, algorithms with multiple reference signals were used to retrieve transmitted EM signals. The feasibility of the regularized variable step size LMS algorithms with numerical simulation was analyzed and presented. The adaptive processing techniques were applied in the recovery of frequency and binary phase shift key modulated signal. The proposed multi-channel adaptive technique achieves fast convergence speed, low mean squared error and is shown to have good convergence characteristics compared to conventional methods. In addition to attaining good results from the multi-channe... [more]

One of the repeating themes around the provision of the knowledge and skills needed for delivering sustainable communities is the idea of a “common language” for all built environment professionals. This suggestion has been repeated regularly with each new political and professional review within and between different sectors responsible for the delivery of sustainable communities. There have been multiple efforts to address academic limitations, industry fragmentation and promote more interdisciplinary working and sector collaboration. This research explored the role of skills for sustainable communities, particularly within the higher education (HE) sector, and the responses to support the development of a “common language of sustainability” that can be shared between different sectors, professional disciplines and stakeholders. As an interdisciplinary group of academics and practitioners working with the HE sector in the North East of England, we evaluate the progression of sector c... [more]

As both the human population and living standards grow, so does the worldwide electricity demand. However, the power sector is also one of the biggest environmental polluters. Therefore, options are currently being sought aimed at reducing environmental impacts, one of the potential tools for which concerns the use of life cycle assessment. This study, therefore, focuses on the most commonly used nonrenewable (black coal, lignite, natural gas and nuclear) and renewable sources (wind, hydro and photovoltaic) in the Czech Republic in terms of their construction, operation, and decommissioning periods. Environmental impacts are assessed via the use of selected impact categories by way of product environmental footprint methodology. The results highlight the potential environmental impacts associated with electricity generation for each of the primary energy sources. Black coal and lignite power plants were found to contribute most to the global warming, resource use, energy carriers and r... [more]