Transportation of renewable wood is increasing, being a necessary operation in logistics of the environmentally sustainable forest industry. However, increasing the transportation capacity is a source of greenhouse gas emissions. In addition to trucks’ emissions, maintaining road infrastructure affects the environment by the emissions of increasing utilization of HCT (high-capacity transportation), that is, larger and heavier vehicles, affecting the backhauling transportation and the efficiency of road-network combinations. Environmental efficiency is an important metric which is used for comparisons among technological alternatives employed in the utilization of energy derived from both fossil and renewable resources. Based on the enterprise resource planning (ERP) data (2018−2020), CO2 emissions of increasing HCT were calculated for a forest industry corporation. The reduction in average fuel consumption (ml t × km−1), between 52% and 70% in backhauling transportation, was 18.88%. In... [more]

The global demand for air conditioners (ACs) has more than tripled since 1990, with 1.6 billion units currently in use. With the rapid economic and population growth of countries located in the hottest parts in the world, this trend is likely to continue in the future. The aim of this study was to show the benefits of introducing air conditioners with different materials or different technologies such as inverters with high energy-saving performance on the environment and human health in Indonesia. To evaluate the environmental impacts of the different technologies, a cradle-to-grave life cycle assessment (LCA) of air conditioners was conducted using the life-cycle impact assessment method based on endpoint modeling (LIME3). As expected, the use stage has the largest global warming potential (GWP), representing more than 90% of the impact, whereas copper and nickel have the most important impact in terms of resource consumption (about 50%). We found that the impacts are heavily depende... [more]

This paper proposes an analysis of the energy efficiency of a small quadruped robotic structure, designed based on the MIT Mini Cheetah, controlled using a central pattern generator based on the FitzHugh−Nagumo neuron. The robot’s performance evaluated on structurally complex terrain in a dynamic simulation environment is compared with other robotic structures on wheels and with hybrid architectures. The energy cost involved in carrying out an assigned task involving the need to traverse uneven terrain is calculated as a relevant index to be taken into account. In particular, simple control strategies impacting the leg trajectories are taken into account as the main factors affecting the energy efficiency in different terrain configurations. The adaptation of the leg trajectories is evaluated depending on the terrain characteristics, improving the locomotion performance.

This is a review of the concepts of purpose, direction, and objective in the discipline of thermodynamics, which is a pillar of physics, natural sciences, life science, and engineering science. Reviewed is the relentless evolution of this discipline toward accounting for evolutionary design with direction, and for establishing the concept of purpose in methodologies of modeling, analysis, teaching, and design optimization. Evolution is change after change toward flow access, with direction in time, and purpose. Evolution does not have an ‘end’. In thermodynamics, purpose is already the defining feature of methods that have emerged to guide and facilitate the generation, distribution, and use of motive power, heating, and cooling: thermodynamic optimization, exergy-based methods (i.e., exergetic, exergoeconomic, and exergoenvironmental analysis), entropy generation minimization, extended exergy, environomics, thermoecology, finite time thermodynamics, pinch analysis, animal design, geop... [more]

In this paper a novel hybrid piezoelectric and electromagnetic energy harvester for civil engineering low-frequency sloshing environment is reported. The architecture, fabrication and characterization of the harvester are discussed. The hybrid energy harvester is composed of a permanent magnet, copper coil, and PVDF(polyvinylidene difluoride) piezoelectric film, and the upper U-tube device containing a cylindrical fluid barrier is connected to the foundation support plate by a hinge and spring. The two primary means of energy collection were through the vortex street, which alternately impacted the PVDF piezoelectric film through fluid shedding, and the electromotive force (EMF) induced by changes in the magnetic field position in the conducting coil. Experimentally, the maximum output power of the piezoelectric transformer of the hybrid energy harvester was 2.47 μW (circuit load 270 kΩ; liquid level height 80 mm); and the maximum output power of the electromagnetic generator was 2.72... [more]

If excessive and misdirected, street lighting (SL) causes energy waste and might pose significant risks to humans and natural ecosystems. Based on data collected by an interactive user-oriented method, we developed a novel empirical approach that enables the spatial identification of over-illuminated areas in residential neighborhoods and calculation of potential energy savings that can be achieved there, by reducing excessive illumination. We applied the estimated model to a densely populated residential neighborhood in the City of Tel Aviv-Yafo in Israel, to test the proposed approach’s performance. According to our estimates, illumination levels can be lowered by up to 50% in approximately 60% of the neighborhood’s area, which is currently over-illuminated, thus leading to significant energy savings, while preserving a reasonable level of visual comfort associated with SL.

The efficient and timely removal of organic matter and nutrients from water used in normal municipal functions is considered to be the main task of wastewater treatment plants (WWTPs). Therefore, these facilities are considered to be essential units that are required to avoid pollution of the water environment and decrease the possibility of triggering eutrophication. Even though these benefits are undeniable, they remain at odds with the high energy demand of wastewater treatment and sludge processes. As a consequence, WWTPs have various environmental impacts, which can be estimated and categorized using Life Cycle Assessment (LCA) analysis. In this study, a municipal WWTP based in Poznań, Poland, was examined using the method defined in ISO 14040. ReCiPe Endpoint and Midpoint (v1.11), in a hierarchical approach, were used to evaluate the environmental impacts regarding 18 different categories. All calculations were conducted using a detailed database from 2019, which describes each c... [more]

The heat recovery efficiency of ventilation systems utilizing heat recovery ventilators (HRVs) depends not only on the heat recovery efficiency of the HRV units themselves but also on the intake and exhaust ducts that connect the HRV units to the outside environment. However, these ducts are often neglected in heat loss calculations, as their impact on the overall heat recovery efficiency of HRV systems is often not understood and, to the knowledge of the authors, a mathematical model for the overall heat recovery efficiency of HRV systems that accounts for these ducts has not been published. In this research, a mathematical model for the overall heat recovery efficiency of HRV systems that accounts for the intake and exhaust ducts was derived and validated using real-life data. The model-predicted decrease in heat recovery efficiency due to the ducts was in reasonable agreement (relative error within 20%) with the real-life measurements. The results suggest that utilizing this model a... [more]

Current research on human comfort has identified a gap in the investigation of multi-domain perception interactions. There is a lack of understanding the interrelationships of different physio-socio-psychological factors and the manifestation of their contextual interactions into cross-modal comfort perception. In that direction, this study used data from a post occupancy evaluation survey (n = 26), two longitudinal comfort studies (n = 1079 and n = 52) and concurrent measurements of indoor environmental quality factors (one building) to assess the effect of thermal, acoustic and air quality perception interactions on comfort and satisfaction of occupants in three mixed-mode university office buildings. The study concluded that thermal sensation (TSV) is associated with both air quality (ASV) and noise perception (NSV). The crossed effect of the interaction of air quality and noise perception on thermal sensation was not evident. The key finding was the significant correlation of opera... [more]

Solar home systems (SHSs) are successfully addressing energy access deficits across the globe, particularly when combined with pay-as-you-go (PAYG) payment models, allowing households to pay for energy services in small instalments. To increase energy access, it is vital to understand the PAYG SHS customer journey in depth. To aid this, the paper presents unique data from active customers, consisting of structured interviews (n = 100) and two focus groups (n = 24) across two districts in Rwanda. These results are presented under a novel customer journey framework, which describes all the individual stages a customer might experience, including awareness and understanding, purchase, usage, upgrade, recommendation and retaining or switching energy source. The paper reveals that the customer journey is non-linear and cyclical in nature, acknowledging that a household operates in a social network within which they could influence or be influenced by others. It also highlights the growing i... [more]

In this study, a performance evaluation of a photovoltaic thermal (PVT) system using nanofluids was carried out through an efficiency comparison study using water, CuO-water, and Al2O3-water nanofluids as the heat medium of the PVT system. In addition, a model for computational fluid dynamics (CFD) analysis was established, and the validity of the model was verified by comparing it with the experimental results of the PVT system. Through this, it was confirmed that the outlet temperature of the PVT system using nanofluids can be predicted by applying various conditions. Based on the results, the use of nanofluid as heating medium for the PVT system is proposed to improve the efficiency sufficiently compared to the conventional heating media.

The sewage sludges are the byproducts of the wastewater treatment. The new perspective of the wastewater value chain points to a sustainable circular economy approach, where the residual solid material produced by sewage sludge treatments is a resource rather than a waste. A sewage sludge treatment system consists of five main phases; each of them can be performed by different alternative processes. Each process is characterized by its capability to recover energy and/or matter. In this paper, a state of the art of the sludge-to-energy and sludge-to-matter treatments is provided. Then, a scenario analysis is developed to identify suitable sewage sludge treatments plants that best fit the quality and flowrate of sewage sludge to be processed while meeting technological and economic constraints. Based on the scientific literature findings and experts’ opinions, the authors identify a set of reference initial scenarios and the corresponding best treatments’ selection for configuring sewag... [more]

The present study is in line with the United Nations Sustainable Development Goals (UN-SDGs) that address pertinent global issues. This study focuses on the need for access to clean and affordable energy consumption, responsible energy consumption, sustainable economic growth, and climate change mitigation. To this end, this paper evaluates the relevance of the renewable energy sector on the environmental Kuznets curve (EKC) framework in Portugal, Italy, Greece, and Spain for the period 1995−2015. As an econometric strategy, we adopt the use of panel data over the highlighted countries. In the first step, we apply the unit root test recommended by Levin, Lin, and Chu in conjunction with ADF-Fisher, and Phillips-Perron for robustness and consistency. We found that the variables used in this study are integrated I (1) in the first difference. In the second step, we apply the Pedroni cointegration test, and Kao Residual cointegration test, and we observe that the variables are cointegrate... [more]

Distributed Energy System (DES), a comprehensive energy utilization system distributed on user side, has been recognized as a promising energy utilization method that can improve energy efficiency, reduce greenhouse gas emissions, and achieve sustainable development. However, the DES is usually driven by various energy sources, and it is a complex issue to decide the composition of the system. To improve the incompleteness of a single subjective or objective assessment. So, it is urgent to find a comprehensive and efficient decision-making method for different systems. This paper states a total of 23 indicators in 4 criterion group: technology, economy, environment, and society. Based on the combination of the order relation analysis method (G1) and the anti-entropy weighting method (a-EWM), a comprehensive evaluation model, order relation-anti-entropy weight model (G1-aEWM), of distributed energy is established. This comprehensive evaluation model is used to analyze a hospital in Hena... [more]

Despite the growing scientific evidence, the electricity market models used in Chile do not consider the effects of climate change on hydroelectric energy production. Based on a statistical analysis of the historical hydro-energy inflow dataset and a revision of the scientific literature, we suggest a set of technical and statistical criteria to determine an alternative representation of the hydro-energy uncertainty in the Chilean electricity market. Based on these criteria, we then propose an alternative range of historical hydrological data, which is built by shedding the first 35 years of the historical dataset (out of 59 years) and using only a reduced subset of 24 years. Additionally, we propose to capture the potential impacts of even more prolonged droughts on the Chilean electricity system by repeating the last nine years of data at the end of the 24 year-long series. The resulting extended subset of 33 hydro-years is approximately 10% drier on average than the original dataset... [more]

The physiological and cognitive effects of environmental stimuli from the built environment on humans have been studied for more than a century, over short time frames in terms of comfort, and over long-time frames in terms of health and wellbeing. The strong interdependence of objective and subjective factors in these fields of study has traditionally involved the necessity to rely on a number of qualitative sources of information, as self-report variables, which however, raise criticisms concerning their reliability and precision. Recent advancements in sensing technology and data processing methodologies have strongly contributed towards a renewed interest in biometric data as a potential high-precision tool to study the physiological effects of selected stimuli on humans using more objective and real-time measures. Within this context, this review reports on a broader spectrum of available and advanced biosensing techniques used in the fields of building engineering, human physiolo... [more]

Cities generate about 85% of the EU’s GDP. As such, they are key players in shaping and providing technological and social innovations but also environmental impact. Thus, they must urgently engage in unprecedented systemic transformational and bold transitions towards sustainability and climate neutrality. The contribution—taking into account that the concepts of community resilience and urban transition have changed as a consequence of COVID-19—critically discusses innovative frameworks and funding opportunities that Horizon Europe will put in place to boost sustainable urban areas in Europe, driving a transition to 100 Positive Energy Districts and 100 climate-neutral cities by 2030.

The Mexican national electricity transmission and distribution grid (SEN, initials in Spanish) is characterized by the high interconnection between its several electricity generation plants and the millions of final consumers throughout the country. This feature, which is seen first as an adequate transmission and distribution method for electricity between producer and consumer, has the inconvenience of being highly complex when renewable energy is introduced into the SEN. The random nature of renewable energy means that coordination between the producer and consumer is difficult; therefore, these energy sources are considered by the Mexican Federal Commission of Electricity (CFE, initials in Spanish) without priority in their generation and distribution. In this document, a solution for this is given by the consideration of on-site photovoltaic production in the Mexican residential sector, setting a straightforward relationship between production and consumption, neglecting the long-... [more]

The low carbon transition requires the high growth of renewable generation penetration in energy systems to ultimately achieve net-zero carbon target. To ensure the reliable operation of energy systems with high intermittent renewable output, it is critical to have sufficient flexible resources to avoid curtailment. Therefore, the integrated power-natural gas-heating energy systems with power to gas (P2G) and gas storage has attracted great research interest especially on the combined operation method to enhance the flexibility provision between each other. In this paper, taking heating demand, P2G and gas storage into consideration, a multi-objective optimal operation strategy of integrated power-natural gas-heating energy systems is presented to obtain the maximum economic and environmental benefits. Furthermore, a novel model of flexibility metric is proposed based on redundant linepack and gas storage. Case studies without P2G and with P2G are carried out on integrated IEEE 39-bus... [more]

The excessive air pollution in the Lubuskie Voivodeship and throughout Poland is a very serious problem. One of the main causes of poor air quality is low emission, which arises at a short distance from the ground (up to 40 m). The real reduction of low emission requires a series of measures. The most important of them, include replacement of non-ecological boilers heating single-family buildings, improvement of thermal insulation of outer building walls, development of public transport, limiting the movement of old, non-ecological cars, conducting extensive educational activities, economic support for the poorest families in pro-ecological activities, and development of district heating in urban areas. The issue of thermal modernization is also important from the point of view of ensuring an appropriate level of energy security in the social dimension. The article presents a scenario analysis of activities aimed at reducing low emission through economic support for thermal modernizati... [more]

Because of extensive variations in occupancy patterns around office space environments and their use of electrical equipment, accurate occupants’ behaviour detection is valuable for reducing the building energy demand and carbon emissions. Using the collected occupancy information, building energy management system can automatically adjust the operation of heating, ventilation and air-conditioning (HVAC) systems to meet the actual demands in different conditioned spaces in real-time. Existing and commonly used ‘fixed’ schedules for HVAC systems are not sufficient and cannot adjust based on the dynamic changes in building environments. This study proposes a vision-based occupancy and equipment usage detection method based on deep learning for demand-driven control systems. A model based on region-based convolutional neural network (R-CNN) was developed, trained and deployed to a camera for real-time detection of occupancy activities and equipment usage. Experiments tests within a case s... [more]

The present study evaluates the potential upgrade of a Linear Fresnel Reflector (LFR) collector at the Cyprus Institute (CyI) with photovoltaics via the calculation of the Levelized Cost Of Heat (LCOH). For over 4 years the collector has been supplying heating and cooling to the Novel Technologies Laboratory (NTL) of the Cyprus Institute (CyI). Extensive measurements have been carried out both on the LFR and NTL to render real numbers in the computations. This hybridization would be undertaken with the installation of PV arrays under mirrors, so that the collector is able to either reflect direct radiation to the receiver to process heat or to produce electricity directly in the built environment. The main objective is the decrease of the LCOH of Linear Fresnel collectors, which hinders their wider deployment, while air conditioning demand is globally booming. The results show that the LCOH for a small LFR to supply air conditioning is high, c€25.2−30.1 per kWh, while the innovative PV... [more]

Work safety can be a component of the broadly understood sustainable enterprise approach that goes beyond the idea of sustainable development. Sustainability in an unpredictable and turbulent environment has many constellations, many aspects and many fields of the enterprise’s activity and it complements the rationality of the business. The aim is to understand the sustainability of safety, because this is the term we have adopted for rationality in occupational safety management, in the context of the analysis of work accidents in the Polish steel industry, with particular emphasis on the methodology of forecast assessment in the studied area, proposed by us. The realized forecasts were used for the creation of a combined model which formed the basis for formulating conclusions from the analysis. The publication presents the modeling of the victims of work accidents in the steel sector in Poland. Based on the research of the forecasts obtained, a downward trend is recorded in the numb... [more]

Environmental considerations are motivating the adoption of low global warming potential refrigerants. Most of these are mildly flammable, i.e., A2L. Their susceptibility to ignition from various ignition sources is poorly understood, particularly for the stoichiometric and quiescent mixtures that are emphasized here. The viability of fifteen residential ignition sources to ignite four A2L refrigerants is considered. Tests are performed in a windowed chamber with a volume of 26 L. The refrigerants are R-32 (difluoromethane); R-452B (67% R-32, 26% R-1234yf, and 7% pentafluoroethane); R-1234yf (2,3,3,3-tetrafluoropropene); and R-1234ze (1,3,3,3-tetrafluoropropene). Two types of ignition sources are confirmed here to be viable: a resistively heated wire at 740 °C and open flames. When the refrigerant concentration was increased slowly, candle flames and butane flames extinguished before initiating any large deflagrations. Eleven other sources were not viable: a smoldering cigarette, a but... [more]

Wastewater treatment plants and power generation constitute inseparable parts of present society. So the growth of wastewater treatment plants is accompanied by an increase in the energy consumption, and a sustainable development implies the use of renewable energy sources on a large scale in the power generation. A case study of the synergy between wastewater treatment plants and photovoltaic systems, aiming to improve the energetic, environmental and economic impacts, is presented. Based on data acquisition, the energy consumption analysis of wastewater treatment plant reveals that the highest demand is during April, and the lowest is during November. The placement of photovoltaic modules is designed to maximize the use of free space on the technological area of wastewater treatment plant in order to obtain a power output as high as possible. The peak consumption of wastewater treatment plant occurs in April, however the peak production of the photovoltaic is in July, so electrochemi... [more]