Owing to residual biomass availability, the share of advanced biofuels produced from secondary biomass is forecasted to increase and significantly contribute towards achieving net-zero emissions. The current work investigates bio-methanol production through a new process configuration designed to improve the environmental performance when compared to the state-of-the art technologies (Base Case). The environmental evaluation is conducted according to the Life Cycle Assessment (LCA) methodology. ReCiPe was employed as an impact assessment method with the aid of GaBi software. Depending on the plant geographical location, wooden biomass and exhausted olive pomace were evaluated as biomass sources. A scenario analysis targeting different energy sources was performed as well. The outcome of the environmental evaluation highlights a better performance in eight of a total of nine impact categories studied in the wooden biomass scenarios compared to the exhausted olive pomace. Moreover, two o... [more]

The technical supply potential of biomass and the associated greenhouse gas (GHG) emissions are widely studied in the literature. However, relatively few studies have examined the role of biomass co-firing for future electricity in China by integratedly considering the economic supply potential and GHG effects. To fill this gap, we choose the Jiangsu Province in China as a case study and build up a partial equilibrium model with multiple agricultural commodities. Using this model combined with a life cycle assessment, we jointly determine the economic potential of the biomass supply for a biomass co-firing purpose and social benefits, including the agricultural producers’ surplus and GHG mitigation potential. The simulation incorporates the county-level biomass market of various crop residues as well as endogenous crop prices and transportation costs. We find that 0.7−12.5 M MT of residue-based biomass are economically viable for co-firing in coal-based power plants (up to 20%) at biom... [more]

Decarbonization of the aviation sector relies on deployment of sustainable aviation fuels (SAF) at commercial scale. Hydrothermal liquefaction (HTL) has been recognized as a promising technology to help supply the increasing projected SAF demand. High availability of agro-industrial residues, combined with a well-established biorefinery system, makes the sugarcane industry in Brazil a good option for HTL technology deployment. Moreover, challenges regarding the economic feasibility of SAF from HTL could be partially addressed by the RenovaBio policy, a market-driven incentive mechanism of carbon credits implemented in Brazil. This study investigated both the techno-economic and life cycle assessment of SAF production from sugarcane lignocellulosic residues, considering HTL integrated to a first-generation ethanol distillery and a HTL stand-alone facility. The evaluated scenarios showed great climate mitigation potential, reaching a reduction of up to 73−82% when compared to fossil jet... [more]

Cities need to make themselves energy self-sufficient by exploiting renewable sources and, above all, to evaluate the potential and constraints that each city can express by virtue of its own characteristics. This study focused on how the realisation of a renewable energy community could be approached in urbanised contexts. The methodology involved the selection of three case studies in Rome analysing the feasibility, programming and design scale, and the implications of planning RECs. Through simulation at three levels of detail, this study identifies elements to assess the feasibility of RECs and to elaborate scenarios to support their planning and dimensioning. The practical importance is to identify a possible methodological path and relevant factors which public or private stakeholders can consider at different levels in setting up RECs in an urban context. The research conclusions of these simulations point out that the specificities of a context affect many factors, among which... [more]

The phenomenon of pipeline erosion dominated by sulfur particles has become a key research target for sulfur-containing gas-gathering pipelines. Gas-solid two-phase flow of sulfur-containing gases is simulated with a coupled CFD-DPM model in this paper. The Realizable k-ε turbulence model was used to determine the changes in the complex flow field and the Euler-Lagrange method was used to describe the specific trajectory of sulfur particles in the complex flow field. The main erosion trace distribution and the effect of secondary flow effects at the elbow were analyzed and the erosion distribution pattern was investigated for different curvature ratios, particle sizes, and pipe diameters. The results show that the formation of erosion along the tip of the V-shaped erosion trace on the outlet sidewall of the elbow may be related to secondary flow effects. The increase of the curvature ratio RD reduces the erosion intensity of the maximum erosion area, but subsequent increase will result... [more]

Life is dependent on water. However, in terms of the potential effects, water scarcity is quickly emerging as one of the most critical problems in the world. To access more fresh water for drinking, sanitation, and irrigation, water can be harvested from different forms of water on earth. Atmospheric harvesting is the best alternative for producing fresh water for everyday life and reducing global water shortages. To date, many modern technologies have been introduced for this application, with several prototypes being demonstrated. Thus, this study explores the potential benefits of the current atmospheric water harvesting systems in terms of their modes, atmospheric conditions, and production rate and examines the key factors that affect the efficiency of atmospheric water harvesting, such as temperature and humidity. According to the studies, there has been a significant advancement in energy harvesting and conversion technology, along with atmospheric water harvesting, over the pas... [more]

The article presents energy, economic and environmental analyses of the possibilities of using alternative, high-efficiency sources of heat and energy for the multi-family residential building located in Wrocław, Poland, in the temperate climate zone characteristic of Central Europe. For conventional, alternative and hybrid heating systems based on renewable energy sources, comparative analyses of final energy demand, demand for non-renewable primary energy, CO2 emissions, investment costs and life cycle costs were carried out. The detailed comparative analyses of the research results led to the formulation of conclusions and recommendations which may serve as guidelines for designers of multi-family residential buildings and investors. The solutions of heating and hot water preparation systems recommended in the article will enable the design and construction of buildings with no negative impact on the environment. Taking into account the economic and environmental analyses, the optim... [more]

Extensive energy consumption has incurred global environmental problems such as climate change. Home appliances are highly used products and consume large amounts of energy. When widely applied, energy-efficient home appliances promote energy efficiency and reduce carbon emissions. Therefore, people’s intention to purchase these home appliances merits research attention. In this study, a comprehensive model was developed using the theories of planned behavior, perceived value, and environmental awareness. Data were collected through a questionnaire survey, to which 448 valid responses were returned, and analyzed using partial least squares. The results indicated that consumers’ intention to purchase energy-efficient home appliances was positively affected by their attitude toward purchasing the appliances. Such attitude was significantly and positively affected by functional value, price value, environmental value, and environmental awareness. However, consumers’ attitudes toward purch... [more]

The growth of renewable energy actively takes part in decarbonizing the fossil-fuel-based energy system. It reduces carbon emissions, carbon footprint, and greenhouse gas emissions and increases clean energy. The usage of renewable resources reduces and solves several problems, such as increasing temperature, carbon footprint, greenhouse gas emissions, and energy waste. Every sector contributes to increasing the above-mentioned factors in the environment. One of the main reasons for this biodegradation and climate change is energy resources. Using renewable energy instead of fossil fuel can solve the problem. This paper aims to find open research problems about the application of renewable energy and to initiate new innovative ideas regarding renewable energy. A detailed state of the art includes trends for renewable energy resources, their theoretical evolution, and practical implementations. Methodologies used for decision analysis in renewable energy are discussed in detail. The tim... [more]

Energy is the substance foundation of human society. Single−atom catalysts (SACs) have emerged as promising electrode materials in the energy field owing to their unique characteristics. It was demonstrated that the hydrogen evolution reaction (HER) performance of SACs relies on the metal−centric species and the corresponding local coordination engineering. Herein, the recent progress relating to asymmetric atomic catalysts for the HER is reviewed, including low coordination, heteroatomic coordination, and bimetallic coordination. In addition, the connection between the coordination structures and the presented electrocatalytic performance was discussed. The main challenges that need to be addressed for the asymmetric atomic catalysts in the HER are summarized. Finally, some insights into the development of high−quality asymmetric atomic catalysts are included.

The normal development of “smart buildings,” which calls for integrating sensors, rich data, and artificial intelligence (AI) simulation models, promises to usher in a new era of architectural concepts. AI simulation models can improve home functions and users’ comfort and significantly cut energy consumption through better control, increased reliability, and automation. This article highlights the potential of using artificial intelligence (AI) models to improve the design and functionality of smart houses, especially in implementing living spaces. This case study provides examples of how artificial intelligence can be embedded in smart homes to improve user experience and optimize energy efficiency. Next, the article will explore and thoroughly analyze the thorough analysis of current research on the use of artificial intelligence (AI) technology in smart homes using a variety of innovative ideas, including smart interior design and a Smart Building System Framework based on digital... [more]

An energy production system that combines biomass and fuel cells produces much energy with minimal environmental impact. However, the hydrogen sulfide (H2S) contained in gasified biomass degrades fuel cell performance, thus negating the advantages of this combination. In this study, the removal of H2S by adsorption after biomass gasification was investigated. Metal oxides with high adsorption performance are common H2S adsorbents. However, they have a significant environmental impact in terms of metal depletion, which is an environmental impact indicator. Therefore, neutralized sediment materials from mine drainage treatments can be used as H2S adsorbents. A previous study found that the adsorption performance of H2S adsorbents is equivalent to that of metal oxides, especially in the high-temperature zone (300 °C), and the environmental impact is considerably lower than that of metal oxides. However, because the neutralized sediment is a powder (Φ 4.5 μm on average), there is a possibi... [more]

The present study investigates electricity consumption, carbon dioxide (CO2) emission, and economic growth decoupling using data from 1971 to 2020 for the economy of China. The study uses decoupling analysis (DA) as the prime methodology for analysis. Furthermore, the findings put forward a significant contribution to an economic picture of the economy of China and a sizeable addition to related research and findings under the assigned issues discussed in the study. The study’s main contribution is to decouple electricity consumption from the gross domestic product (GDP), which is rare in the existing literature in the context of China. Moreover, the study shows the decoupling of environment affects electricity consumption, and GDP growth. The DA model shows that electricity consumption is the main driving force enhancing economic growth. However, industrialization has increased greenhouse gases, global warming, and climate change due to production and consumption. China’s economy uses... [more]

Global fossil fuel consumption has induced emissions of anthropogenic carbon dioxide (CO2), which has emanated global warming. Significant levels of CO2 are released continually into the atmosphere from the extraction of fossil fuels to their processing and combustion for heat and power generation including the fugitive emissions from industries and unmanaged waste management practices such as open burning of solid wastes. With an increase in the global population and the subsequent rise in energy demands and waste generation, the rate of CO2 release is at a much faster rate than its recycling through photosynthesis or fixation, which increases its net accumulation in the atmosphere. A large amount of CO2 is emitted into the atmosphere from various sources such as the combustion of fossil fuels in power plants, vehicles and manufacturing industries. Thus, carbon capture plays a key role in the race to achieve net zero emissions, paving a path for a decarbonized economy. To reduce the c... [more]

As an industrial solid waste, the discharge of a large amount of red mud (RM) causes serious environmental problems; thus, a large proportion of RM co-combustion has been proposed to solve the consumption problem. In this paper, an experiment with various proportions of RM co-combustion was conducted on a 0.2 t/h circulating fluidized bed (CFB) boiler. Desulfurization performance, combustion characteristics, and ash deposition characteristics were analyzed, especially under the large proportional co-combustion conditions. As the study results showed, the desulfurization efficiency was positively correlated with the RM co-combustion proportion. When the RM co-combustion proportion reached 50%, the desulfurization efficiency was over 94%. After a period of cyclic combustion, the highest desulfurization efficiency exceeded 99.5%. The smaller size of RM was beneficial to improve the combustion efficiency and the combustion stability. However, a large area of sintering formed on the top of... [more]

With the accelerating urbanization process in China, the extensive economic growth model with high energy consumption and high pollution aggravates atmospheric environmental pollution and restricts the sustainable development of the social economy. The Beijing−Tianjin−Hebei region has the most severe haze pollution and the most acute contradiction between resources, environment and economic development. Based on the physical coupling theory, this paper constructs a coupling coordination degree model of the economy, environment and high haze pollution industries, such as the thermal power industry. Through literature analysis and expert investigation of the economic, industrial and environmental data of the Beijing−Tianjin−Hebei region from 2006 to 2018, the coordinated development of the economy, environment and high haze pollution industries, such as the thermal power industry, in the above region, was dynamically monitored. The monitoring results show that the development level of th... [more]

Energy performance contracts are a very promising area for attracting private investment in the renewable energy sector. The concept of energy performance contracting is a well-established mechanism aimed at increasing the energy efficiency of a facility and reducing annual maintenance costs. This paper presents a hierarchical model of a decentralized energy system with renewable energy sources and a battery energy storage system under an energy service agreement. This model reflects the interaction between the client and the performance company. The model includes the main parameters characterizing the energy service contract, such as net present value, contract duration and levelized cost of energy. As an example, a real decentralized power system is considered, which currently only uses diesel generation. In the case of building a photovoltaic system, the optimal equipment composition consists of a 100 kW solar station and storage batteries with a capacity of 240 kW·h. The optimal c... [more]

The European Union’s ambition to reach climate neutrality and a toxic-free environment by 2050 entails, among other things, cleaner road vehicles. The European Commission’s proposal for the next regulatory emissions standard, Euro 7, requires the measurement of pollutants currently not regulated on the road. In this study we compared a prototype portable emissions measurement system (PEMS) measuring CO2, CO, NO, NO2, N2O, NH3, CH4, and HCHO based on infrared laser absorption modulation (IRLAM), and two Fourier transform infrared (FTIR) spectrometers with laboratory grade analyzers. To this end, one Euro 6d Diesel, one Euro 6d gasoline, and one Euro 4 gasoline vehicle were tested at −7 °C and 23 °C with various driving cycles covering traffic conditions to highway dynamic driving. The results demonstrated that the differences among the instruments were small: ±1 mg/km for HCHO, N2O, and CH4, ±2.5 mg/km for NH3, ±10−15 mg/km for NOx, ±50 mg/km or ±15% for CO (whichever was larger), and ±... [more]

The stability of transmission tower bases is key to ensuring the safe operation of power lines. This paper proposes a joint displacement-control technique for foundation-inclined piles and prestressed foundation tie beams to address the problem of tower base displacement and durability degradation caused by environmental factors. A finite element model of an exposed-pile transmission tower conforming to the structural characteristics of the actual line tower was established based on the current situation of Tower 292 of the ±800 kV Tianzhong line in Xinjiang, China. Three different displacement-control schemes were analyzed under the combined effects of tower line load, ice-cover load, and wind load, including changing exposed pile height, changing inclined pile tilt angle, and increasing the prestressed foundation tie beam. The analysis shows that the combined displacement-control technology of foundation-inclined piles and prestressed foundation tie beams can reduce the horizontal di... [more]

Carbon capture, utilization, and storage (CCUS) technology is considered an effective way to reduce greenhouse gases, such as carbon dioxide (CO2), which is significant for achieving carbon neutrality. Based on Derwent patent data, this paper explored the technology topics in CCUS patents by using the latent Dirichlet allocation (LDA) topic model to analyze technology’s hot topics and content evolution. Furthermore, the logistic model was used to fit the patent volume of the key CCUS technologies and predict the maturity and development trends of the key CCUS technologies to provide a reference for the future development of CCUS technology. We found that CCUS technology patents are gradually transforming to the application level, with increases in emerging fields, such as computer science. The main R&D institutes in the United States, Europe, Japan, Korea, and other countries are enterprises, while in China they are universities and research institutes. Hydride production, biological c... [more]

Environmental performance of ships is a critical factor in the shipping industry due to evolving climate change and the respective regulations imposed by authorities all over the world. As shipping moves towards digitization, a large amount of ships’ environmental performance-related data, collected during ships’ voyages, provide opportunities to develop and enhance data-driven performance models by using different machine learning algorithms. This paper introduces new indices of ships’ environmental performance using machine learning techniques. The new indices are produced by combining clustering algorithms as well as principal component analysis. Based on the analysis of the data (14 variables with operational and design characteristics), the ships are divided into four clusters based on the new suggested indices. These clusters categorize the ships according to their physical dimensions, operating region, and operational environmental efficiency, offering insight into the distincti... [more]

The ambitious goal of the European Union (EU) countries is to achieve carbon neutrality by providing inclusive economic growth, which requires the development of relevant incentives and initiatives. Furthermore, such incentives and initiatives should guarantee the achievement of the declared goals. Energy sectors are the core determinant of inclusive economic growth. Traditional energy resources (coal oriented) have a higher negative impact on nature and people’s well-being than on economic and social benefits. However, the transition to renewable energy raises new issues in achieving goals of inclusive economic growth: affordable and clean energy, responsible energy consumption, and energy infrastructure. The analysis of the theoretical framework found that the digitalization of government could be a core instrument for handling the abovementioned issues. The paper aims to justify the role of green energy in achieving inclusive economic growth empirically. The study applies the follow... [more]

This study investigates the transferability of aluminum-silicate-based fuel additivation as a primary, fuel-based mitigation measure for inorganic alkali-based particulate matter (PM) emissions during the complete combustion of wood chips. Therefore, wood chips are additivated with 0.5 wt% of three different types of the aluminum-silicate-based additive kaolin, which differ mainly in their particle size distribution, and with one type of kaolinite. The subsequent combustion trials with non-additivated and additivated wood chips are carried out in a small-scale combustion plant. To evaluate the effect of the additivation of the wood chips, the total particulate matter (TPM) emissions, the potassium (K) emissions, the ultra-fine PM emissions and the carbon monoxide (CO) emissions, as well as the chemical composition of the resulting ashes, are analyzed. In order to compare the primary, fuel-side mitigation measure of fuel additivation with the established secondary mitigation measures, a... [more]

The energy transition is a multidisciplinary challenge that warrants solutions that are robust and sustainable. Energy flexibility, one of the key pillars of the energy transition, is an umbrella term that covers multiple innovative solutions implemented at all levels of the electric grid to ensure power quality standards, amongst other objectives. Low-tech, on the other hand, emphasizes designing, producing, and sustainably implementing solutions. Therefore, considering the multidisciplinary nature of energy transition and the existing energy flexibility solutions, the purpose of this research work is multilateral: first, it presents the concept of low-tech and its associated mechanisms; then, it addresses the misconceptions and similarities that low-tech might have with other innovation approaches; and finally, it provides an assessment of existing flexibility solutions using low-tech as a tool. The result of this assessment is presented qualitatively and indicates that indirect ener... [more]

One of the most effective strategies to mitigate water shortages worldwide is to reuse treated wastewater for freshwater production employing reverse osmosis (RO) technology. This strategy is appropriate in urban areas of arid or semi-arid regions as it can provide a sustainable and reliable water source close to the consumers. One of the drawbacks of RO is the high variability of production costs due to the electricity intensity. In addition, depending on the electricity source, it can also result in substantial environmental costs. This study showed that upgrading pumping and RO membrane systems of a wastewater reuse plant in Cyprus can significantly alleviate these drawbacks in terms cost, water recovery rate, and air pollution. The water-recovery rate of the upgraded RO plant increased from 43.2 to 75 percent, which resulted in a substantial net financial benefit due to the reduction in the quantity of wastewater purchased and the increase in potable water produced. The upgraded sy... [more]